1
0
Fork 0
mirror of https://github.com/denoland/deno.git synced 2024-12-29 10:39:10 -05:00
denoland-deno/core/inspector.rs

854 lines
27 KiB
Rust
Raw Normal View History

// Copyright 2018-2023 the Deno authors. All rights reserved. MIT license.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
//! The documentation for the inspector API is sparse, but these are helpful:
//! <https://chromedevtools.github.io/devtools-protocol/>
//! <https://hyperandroid.com/2020/02/12/v8-inspector-from-an-embedder-standpoint/>
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
use crate::error::generic_error;
use crate::futures::channel::mpsc;
use crate::futures::channel::mpsc::UnboundedReceiver;
use crate::futures::channel::mpsc::UnboundedSender;
use crate::futures::channel::oneshot;
use crate::futures::future::select;
use crate::futures::future::Either;
use crate::futures::prelude::*;
use crate::futures::stream::SelectAll;
use crate::futures::stream::StreamExt;
use crate::futures::task;
use crate::futures::task::Context;
use crate::futures::task::Poll;
use crate::serde_json;
use crate::serde_json::json;
use crate::serde_json::Value;
use anyhow::Error;
use parking_lot::Mutex;
use std::cell::BorrowMutError;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
use std::cell::RefCell;
use std::collections::HashMap;
use std::ffi::c_void;
use std::mem::take;
use std::mem::MaybeUninit;
use std::pin::Pin;
use std::ptr;
use std::ptr::NonNull;
use std::rc::Rc;
use std::sync::Arc;
use std::thread;
use v8::HandleScope;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
pub enum InspectorMsgKind {
Notification,
Message(i32),
}
pub struct InspectorMsg {
pub kind: InspectorMsgKind,
pub content: String,
}
pub type SessionProxySender = UnboundedSender<InspectorMsg>;
pub type SessionProxyReceiver = UnboundedReceiver<String>;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
/// Encapsulates an UnboundedSender/UnboundedReceiver pair that together form
/// a duplex channel for sending/receiving messages in V8 session.
pub struct InspectorSessionProxy {
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
pub tx: SessionProxySender,
pub rx: SessionProxyReceiver,
}
#[derive(Clone, Copy)]
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
enum PollState {
Idle,
Woken,
Polling,
Parked,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
Dropped,
}
/// This structure is used responsible for providing inspector interface
/// to the `JsRuntime`.
///
/// It stores an instance of `v8::inspector::V8Inspector` and additionally
/// implements `v8::inspector::V8InspectorClientImpl`.
///
/// After creating this structure it's possible to connect multiple sessions
/// to the inspector, in case of Deno it's either: a "websocket session" that
/// provides integration with Chrome Devtools, or an "in-memory session" that
/// is used for REPL or converage collection.
pub struct JsRuntimeInspector {
v8_inspector_client: v8::inspector::V8InspectorClientBase,
v8_inspector: Rc<RefCell<v8::UniquePtr<v8::inspector::V8Inspector>>>,
new_session_tx: UnboundedSender<InspectorSessionProxy>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
sessions: RefCell<SessionContainer>,
flags: RefCell<InspectorFlags>,
waker: Arc<InspectorWaker>,
deregister_tx: Option<oneshot::Sender<()>>,
is_dispatching_message: RefCell<bool>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
impl Drop for JsRuntimeInspector {
fn drop(&mut self) {
// Since the waker is cloneable, it might outlive the inspector itself.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
// Set the poll state to 'dropped' so it doesn't attempt to request an
// interrupt from the isolate.
self.waker.update(|w| w.poll_state = PollState::Dropped);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
// V8 automatically deletes all sessions when an `V8Inspector` instance is
// deleted, however InspectorSession also has a drop handler that cleans
// up after itself. To avoid a double free, make sure the inspector is
// dropped last.
self.sessions.borrow_mut().drop_sessions();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
// Notify counterparty that this instance is being destroyed. Ignoring
// result because counterparty waiting for the signal might have already
// dropped the other end of channel.
if let Some(deregister_tx) = self.deregister_tx.take() {
let _ = deregister_tx.send(());
}
}
}
impl v8::inspector::V8InspectorClientImpl for JsRuntimeInspector {
fn base(&self) -> &v8::inspector::V8InspectorClientBase {
&self.v8_inspector_client
}
unsafe fn base_ptr(
this: *const Self,
) -> *const v8::inspector::V8InspectorClientBase
where
Self: Sized,
{
// SAFETY: this pointer is valid for the whole lifetime of inspector
unsafe { std::ptr::addr_of!((*this).v8_inspector_client) }
}
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
fn base_mut(&mut self) -> &mut v8::inspector::V8InspectorClientBase {
&mut self.v8_inspector_client
}
fn run_message_loop_on_pause(&mut self, context_group_id: i32) {
assert_eq!(context_group_id, JsRuntimeInspector::CONTEXT_GROUP_ID);
self.flags.borrow_mut().on_pause = true;
let _ = self.poll_sessions(None);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
fn quit_message_loop_on_pause(&mut self) {
self.flags.borrow_mut().on_pause = false;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
fn run_if_waiting_for_debugger(&mut self, context_group_id: i32) {
assert_eq!(context_group_id, JsRuntimeInspector::CONTEXT_GROUP_ID);
self.flags.borrow_mut().waiting_for_session = false;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
}
impl JsRuntimeInspector {
/// Currently Deno supports only a single context in `JsRuntime`
/// and thus it's id is provided as an associated contant.
const CONTEXT_GROUP_ID: i32 = 1;
pub fn new(
scope: &mut v8::HandleScope,
context: v8::Local<v8::Context>,
is_main: bool,
) -> Rc<RefCell<Self>> {
let (new_session_tx, new_session_rx) =
mpsc::unbounded::<InspectorSessionProxy>();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
let v8_inspector_client =
v8::inspector::V8InspectorClientBase::new::<Self>();
let waker = InspectorWaker::new(scope.thread_safe_handle());
// Create JsRuntimeInspector instance.
let self__ = Rc::new(RefCell::new(Self {
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
v8_inspector_client,
v8_inspector: Default::default(),
sessions: RefCell::new(SessionContainer::temporary_placeholder()),
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
new_session_tx,
flags: Default::default(),
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
waker,
deregister_tx: None,
is_dispatching_message: Default::default(),
}));
let mut self_ = self__.borrow_mut();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self_.v8_inspector = Rc::new(RefCell::new(
v8::inspector::V8Inspector::create(scope, &mut *self_).into(),
));
self_.sessions = RefCell::new(SessionContainer::new(
self_.v8_inspector.clone(),
new_session_rx,
));
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
// Tell the inspector about the global context.
let context_name = v8::inspector::StringView::from(&b"global context"[..]);
// NOTE(bartlomieju): this is what Node.js does and it turns out some
// debuggers (like VSCode) rely on this information to disconnect after
// program completes
let aux_data = if is_main {
r#"{"isDefault": true}"#
} else {
r#"{"isDefault": false}"#
};
let aux_data_view = v8::inspector::StringView::from(aux_data.as_bytes());
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self_
.v8_inspector
.borrow_mut()
.as_mut()
.unwrap()
.context_created(
context,
Self::CONTEXT_GROUP_ID,
context_name,
aux_data_view,
);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
// Poll the session handler so we will get notified whenever there is
// new incoming debugger activity.
let _ = self_.poll_sessions(None).unwrap();
drop(self_);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self__
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
pub fn is_dispatching_message(&self) -> bool {
*self.is_dispatching_message.borrow()
}
pub fn context_destroyed(
&mut self,
scope: &mut HandleScope,
context: v8::Global<v8::Context>,
) {
let context = v8::Local::new(scope, context);
self
.v8_inspector
.borrow_mut()
.as_mut()
.unwrap()
.context_destroyed(context);
}
pub fn exception_thrown(
&self,
scope: &mut HandleScope,
exception: v8::Local<'_, v8::Value>,
in_promise: bool,
) {
let context = scope.get_current_context();
let message = v8::Exception::create_message(scope, exception);
let stack_trace = message.get_stack_trace(scope).unwrap();
let mut v8_inspector_ref = self.v8_inspector.borrow_mut();
let v8_inspector = v8_inspector_ref.as_mut().unwrap();
let stack_trace = v8_inspector.create_stack_trace(stack_trace);
v8_inspector.exception_thrown(
context,
if in_promise {
v8::inspector::StringView::from("Uncaught (in promise)".as_bytes())
} else {
v8::inspector::StringView::from("Uncaught".as_bytes())
},
exception,
v8::inspector::StringView::from("".as_bytes()),
v8::inspector::StringView::from("".as_bytes()),
0,
0,
stack_trace,
0,
);
}
pub fn has_active_sessions(&self) -> bool {
self.sessions.borrow().has_active_sessions()
}
pub fn has_blocking_sessions(&self) -> bool {
self.sessions.borrow().has_blocking_sessions()
}
pub fn poll_sessions(
&self,
mut invoker_cx: Option<&mut Context>,
) -> Result<Poll<()>, BorrowMutError> {
// The futures this function uses do not have re-entrant poll() functions.
// However it is can happpen that poll_sessions() gets re-entered, e.g.
// when an interrupt request is honored while the inspector future is polled
// by the task executor. We let the caller know by returning some error.
let mut sessions = self.sessions.try_borrow_mut()?;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self.waker.update(|w| {
match w.poll_state {
PollState::Idle | PollState::Woken => w.poll_state = PollState::Polling,
_ => unreachable!(),
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
};
});
// Create a new Context object that will make downstream futures
// use the InspectorWaker when they are ready to be polled again.
let waker_ref = task::waker_ref(&self.waker);
let cx = &mut Context::from_waker(&waker_ref);
loop {
loop {
// Do one "handshake" with a newly connected session at a time.
if let Some(mut session) = sessions.handshake.take() {
let poll_result = session.poll_next_unpin(cx);
match poll_result {
Poll::Pending => {
sessions.established.push(session);
continue;
}
Poll::Ready(Some(session_stream_item)) => {
let (v8_session_ptr, msg) = session_stream_item;
InspectorSession::dispatch_message(v8_session_ptr, msg);
sessions.established.push(session);
continue;
}
Poll::Ready(None) => {}
}
}
// Accept new connections.
let poll_result = sessions.session_rx.poll_next_unpin(cx);
if let Poll::Ready(Some(session_proxy)) = poll_result {
let session = InspectorSession::new(
sessions.v8_inspector.clone(),
session_proxy,
false,
);
let prev = sessions.handshake.replace(session);
assert!(prev.is_none());
}
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
// Poll established sessions.
match sessions.established.poll_next_unpin(cx) {
Poll::Ready(Some(session_stream_item)) => {
let (v8_session_ptr, msg) = session_stream_item;
*self.is_dispatching_message.borrow_mut() = true;
InspectorSession::dispatch_message(v8_session_ptr, msg);
*self.is_dispatching_message.borrow_mut() = false;
continue;
}
Poll::Ready(None) => break,
Poll::Pending => break,
};
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
let should_block =
self.flags.borrow().on_pause || self.flags.borrow().waiting_for_session;
let new_state = self.waker.update(|w| {
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
match w.poll_state {
PollState::Woken => {
// The inspector was woken while the session handler was being
// polled, so we poll it another time.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
w.poll_state = PollState::Polling;
}
PollState::Polling if !should_block => {
// The session handler doesn't need to be polled any longer, and
// there's no reason to block (execution is not paused), so this
// function is about to return.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
w.poll_state = PollState::Idle;
// Register the task waker that can be used to wake the parent
// task that will poll the inspector future.
if let Some(cx) = invoker_cx.take() {
w.task_waker.replace(cx.waker().clone());
}
// Register the address of the inspector, which allows the waker
// to request an interrupt from the isolate.
w.inspector_ptr = NonNull::new(self as *const _ as *mut Self);
}
PollState::Polling if should_block => {
// Isolate execution has been paused but there are no more
// events to process, so this thread will be parked. Therefore,
// store the current thread handle in the waker so it knows
// which thread to unpark when new events arrive.
w.poll_state = PollState::Parked;
w.parked_thread.replace(thread::current());
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
_ => unreachable!(),
};
w.poll_state
});
match new_state {
PollState::Idle => break Ok(Poll::Pending), // Yield to task.
PollState::Polling => {} // Poll the session handler again.
PollState::Parked => thread::park(), // Park the thread.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
_ => unreachable!(),
};
}
}
/// This function blocks the thread until at least one inspector client has
/// established a websocket connection.
pub fn wait_for_session(&mut self) {
loop {
match self.sessions.get_mut().established.iter_mut().next() {
Some(_session) => {
self.flags.get_mut().waiting_for_session = false;
break;
}
None => {
self.flags.get_mut().waiting_for_session = true;
let _ = self.poll_sessions(None).unwrap();
}
};
}
}
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
/// This function blocks the thread until at least one inspector client has
/// established a websocket connection.
///
/// After that, it instructs V8 to pause at the next statement.
/// Frontend must send "Runtime.runIfWaitingForDebugger" message to resume
/// execution.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
pub fn wait_for_session_and_break_on_next_statement(&mut self) {
loop {
match self.sessions.get_mut().established.iter_mut().next() {
Some(session) => break session.break_on_next_statement(),
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
None => {
self.flags.get_mut().waiting_for_session = true;
let _ = self.poll_sessions(None).unwrap();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
};
}
}
/// Obtain a sender for proxy channels.
pub fn get_session_sender(&self) -> UnboundedSender<InspectorSessionProxy> {
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self.new_session_tx.clone()
}
/// Create a channel that notifies the frontend when inspector is dropped.
///
/// NOTE: Only a single handler is currently available.
pub fn add_deregister_handler(&mut self) -> oneshot::Receiver<()> {
let (tx, rx) = oneshot::channel::<()>();
let prev = self.deregister_tx.replace(tx);
assert!(
prev.is_none(),
"Only a single deregister handler is allowed"
);
rx
}
/// Create a local inspector session that can be used on
/// the same thread as the isolate.
pub fn create_local_session(&self) -> LocalInspectorSession {
// The 'outbound' channel carries messages sent to the session.
let (outbound_tx, outbound_rx) = mpsc::unbounded();
// The 'inbound' channel carries messages received from the session.
let (inbound_tx, inbound_rx) = mpsc::unbounded();
let proxy = InspectorSessionProxy {
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
tx: outbound_tx,
rx: inbound_rx,
};
// InspectorSessions for a local session is added directly to the "established"
// sessions, so it doesn't need to go through the session sender.
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
let inspector_session =
InspectorSession::new(self.v8_inspector.clone(), proxy, true);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self
.sessions
.borrow_mut()
.established
.push(inspector_session);
take(&mut self.flags.borrow_mut().waiting_for_session);
LocalInspectorSession::new(inbound_tx, outbound_rx)
}
}
#[derive(Default)]
struct InspectorFlags {
waiting_for_session: bool,
on_pause: bool,
}
/// A helper structure that helps coordinate sessions during different
/// parts of their lifecycle.
struct SessionContainer {
v8_inspector: Rc<RefCell<v8::UniquePtr<v8::inspector::V8Inspector>>>,
session_rx: UnboundedReceiver<InspectorSessionProxy>,
handshake: Option<Box<InspectorSession>>,
established: SelectAll<Box<InspectorSession>>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
impl SessionContainer {
fn new(
v8_inspector: Rc<RefCell<v8::UniquePtr<v8::inspector::V8Inspector>>>,
new_session_rx: UnboundedReceiver<InspectorSessionProxy>,
) -> Self {
Self {
v8_inspector,
session_rx: new_session_rx,
handshake: None,
established: SelectAll::new(),
}
}
/// V8 automatically deletes all sessions when an `V8Inspector` instance is
/// deleted, however InspectorSession also has a drop handler that cleans
/// up after itself. To avoid a double free, we need to manually drop
/// all sessions before dropping the inspector instance.
fn drop_sessions(&mut self) {
self.v8_inspector = Default::default();
self.handshake.take();
self.established.clear();
}
fn has_active_sessions(&self) -> bool {
!self.established.is_empty() || self.handshake.is_some()
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
fn has_blocking_sessions(&self) -> bool {
self.established.iter().any(|s| s.blocking)
}
/// A temporary placeholder that should be used before actual
/// instance of V8Inspector is created. It's used in favor
/// of `Default` implementation to signal that it's not meant
/// for actual use.
fn temporary_placeholder() -> Self {
let (_tx, rx) = mpsc::unbounded::<InspectorSessionProxy>();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
Self {
v8_inspector: Default::default(),
session_rx: rx,
handshake: None,
established: SelectAll::new(),
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
}
}
struct InspectorWakerInner {
poll_state: PollState,
task_waker: Option<task::Waker>,
parked_thread: Option<thread::Thread>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
inspector_ptr: Option<NonNull<JsRuntimeInspector>>,
isolate_handle: v8::IsolateHandle,
}
2022-08-21 13:31:14 -04:00
// SAFETY: unsafe trait must have unsafe implementation
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
unsafe impl Send for InspectorWakerInner {}
struct InspectorWaker(Mutex<InspectorWakerInner>);
impl InspectorWaker {
fn new(isolate_handle: v8::IsolateHandle) -> Arc<Self> {
let inner = InspectorWakerInner {
poll_state: PollState::Idle,
task_waker: None,
parked_thread: None,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
inspector_ptr: None,
isolate_handle,
};
Arc::new(Self(Mutex::new(inner)))
}
fn update<F, R>(&self, update_fn: F) -> R
where
F: FnOnce(&mut InspectorWakerInner) -> R,
{
let mut g = self.0.lock();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
update_fn(&mut g)
}
}
impl task::ArcWake for InspectorWaker {
fn wake_by_ref(arc_self: &Arc<Self>) {
arc_self.update(|w| {
match w.poll_state {
PollState::Idle => {
// Wake the task, if any, that has polled the Inspector future last.
if let Some(waker) = w.task_waker.take() {
waker.wake()
}
// Request an interrupt from the isolate if it's running and there's
// not unhandled interrupt request in flight.
if let Some(arg) = w
.inspector_ptr
.take()
.map(|ptr| ptr.as_ptr() as *mut c_void)
{
w.isolate_handle.request_interrupt(handle_interrupt, arg);
}
extern "C" fn handle_interrupt(
_isolate: &mut v8::Isolate,
arg: *mut c_void,
) {
// SAFETY: `InspectorWaker` is owned by `JsRuntimeInspector`, so the
// pointer to the latter is valid as long as waker is alive.
let inspector = unsafe { &*(arg as *mut JsRuntimeInspector) };
let _ = inspector.poll_sessions(None);
}
}
PollState::Parked => {
// Unpark the isolate thread.
let parked_thread = w.parked_thread.take().unwrap();
assert_ne!(parked_thread.id(), thread::current().id());
parked_thread.unpark();
}
_ => {}
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
};
w.poll_state = PollState::Woken;
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
});
}
}
/// An inspector session that proxies messages to concrete "transport layer",
/// eg. Websocket or another set of channels.
struct InspectorSession {
v8_channel: v8::inspector::ChannelBase,
v8_session: v8::UniqueRef<v8::inspector::V8InspectorSession>,
proxy: InspectorSessionProxy,
// Describes if session should keep event loop alive, eg. a local REPL
// session should keep event loop alive, but a Websocket session shouldn't.
blocking: bool,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
impl InspectorSession {
const CONTEXT_GROUP_ID: i32 = 1;
pub fn new(
v8_inspector_rc: Rc<RefCell<v8::UniquePtr<v8::inspector::V8Inspector>>>,
session_proxy: InspectorSessionProxy,
blocking: bool,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
) -> Box<Self> {
new_box_with(move |self_ptr| {
let v8_channel = v8::inspector::ChannelBase::new::<Self>();
let mut v8_inspector = v8_inspector_rc.borrow_mut();
let v8_inspector_ptr = v8_inspector.as_mut().unwrap();
// TODO(piscisaureus): safety comment
#[allow(clippy::undocumented_unsafe_blocks)]
let v8_session = v8_inspector_ptr.connect(
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
Self::CONTEXT_GROUP_ID,
// Todo(piscisaureus): V8Inspector::connect() should require that
// the 'v8_channel' argument cannot move.
unsafe { &mut *self_ptr },
v8::inspector::StringView::empty(),
v8::inspector::V8InspectorClientTrustLevel::FullyTrusted,
);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
Self {
v8_channel,
v8_session,
proxy: session_proxy,
blocking,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
})
}
// Dispatch message to V8 session
fn dispatch_message(
v8_session_ptr: *mut v8::inspector::V8InspectorSession,
msg: String,
) {
let msg = v8::inspector::StringView::from(msg.as_bytes());
// SAFETY: `InspectorSession` is the only owner of `v8_session_ptr`, so
// the pointer is valid for as long the struct.
unsafe {
(*v8_session_ptr).dispatch_protocol_message(msg);
};
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
fn send_message(
&self,
msg_kind: InspectorMsgKind,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
msg: v8::UniquePtr<v8::inspector::StringBuffer>,
) {
let msg = msg.unwrap().string().to_string();
let _ = self.proxy.tx.unbounded_send(InspectorMsg {
kind: msg_kind,
content: msg,
});
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
pub fn break_on_next_statement(&mut self) {
let reason = v8::inspector::StringView::from(&b"debugCommand"[..]);
let detail = v8::inspector::StringView::empty();
// TODO(bartlomieju): use raw `*mut V8InspectorSession` pointer, as this
// reference may become aliased.
(*self.v8_session).schedule_pause_on_next_statement(reason, detail);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
}
impl v8::inspector::ChannelImpl for InspectorSession {
fn base(&self) -> &v8::inspector::ChannelBase {
&self.v8_channel
}
unsafe fn base_ptr(this: *const Self) -> *const v8::inspector::ChannelBase
where
Self: Sized,
{
// SAFETY: this pointer is valid for the whole lifetime of inspector
unsafe { std::ptr::addr_of!((*this).v8_channel) }
}
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
fn base_mut(&mut self) -> &mut v8::inspector::ChannelBase {
&mut self.v8_channel
}
fn send_response(
&mut self,
call_id: i32,
message: v8::UniquePtr<v8::inspector::StringBuffer>,
) {
self.send_message(InspectorMsgKind::Message(call_id), message);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
fn send_notification(
&mut self,
message: v8::UniquePtr<v8::inspector::StringBuffer>,
) {
self.send_message(InspectorMsgKind::Notification, message);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
fn flush_protocol_notifications(&mut self) {}
}
impl Stream for InspectorSession {
type Item = (*mut v8::inspector::V8InspectorSession, String);
fn poll_next(
self: Pin<&mut Self>,
cx: &mut Context,
) -> Poll<Option<Self::Item>> {
let inner = self.get_mut();
if let Poll::Ready(maybe_msg) = inner.proxy.rx.poll_next_unpin(cx) {
if let Some(msg) = maybe_msg {
return Poll::Ready(Some((&mut *inner.v8_session, msg)));
} else {
return Poll::Ready(None);
}
}
Poll::Pending
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
}
/// A local inspector session that can be used to send and receive protocol messages directly on
/// the same thread as an isolate.
pub struct LocalInspectorSession {
v8_session_tx: UnboundedSender<String>,
v8_session_rx: UnboundedReceiver<InspectorMsg>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
response_tx_map: HashMap<i32, oneshot::Sender<serde_json::Value>>,
next_message_id: i32,
notification_tx: UnboundedSender<Value>,
notification_rx: Option<UnboundedReceiver<Value>>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
impl LocalInspectorSession {
pub fn new(
v8_session_tx: UnboundedSender<String>,
v8_session_rx: UnboundedReceiver<InspectorMsg>,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
) -> Self {
let response_tx_map = HashMap::new();
let next_message_id = 0;
let (notification_tx, notification_rx) = mpsc::unbounded::<Value>();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
Self {
v8_session_tx,
v8_session_rx,
response_tx_map,
next_message_id,
notification_tx,
notification_rx: Some(notification_rx),
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
}
pub fn take_notification_rx(&mut self) -> UnboundedReceiver<Value> {
self.notification_rx.take().unwrap()
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
pub async fn post_message<T: serde::Serialize>(
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
&mut self,
method: &str,
params: Option<T>,
) -> Result<serde_json::Value, Error> {
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
let id = self.next_message_id;
self.next_message_id += 1;
let (response_tx, mut response_rx) =
oneshot::channel::<serde_json::Value>();
self.response_tx_map.insert(id, response_tx);
let message = json!({
"id": id,
"method": method,
"params": params,
});
let stringified_msg = serde_json::to_string(&message).unwrap();
self.v8_session_tx.unbounded_send(stringified_msg).unwrap();
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
loop {
let receive_fut = self.receive_from_v8_session().boxed_local();
match select(receive_fut, &mut response_rx).await {
Either::Left(_) => continue,
Either::Right((result, _)) => {
let response = result?;
if let Some(error) = response.get("error") {
return Err(generic_error(error.to_string()));
}
let result = response.get("result").unwrap().clone();
return Ok(result);
}
}
}
}
async fn receive_from_v8_session(&mut self) {
let inspector_msg = self.v8_session_rx.next().await.unwrap();
if let InspectorMsgKind::Message(msg_id) = inspector_msg.kind {
let message: serde_json::Value =
match serde_json::from_str(&inspector_msg.content) {
Ok(v) => v,
Err(error) => match error.classify() {
serde_json::error::Category::Syntax => json!({
"id": msg_id,
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
"result": {
"result": {
"type": "error",
"description": "Unterminated string literal",
"value": "Unterminated string literal",
},
"exceptionDetails": {
"exceptionId": 0,
"text": "Unterminated string literal",
"lineNumber": 0,
"columnNumber": 0
},
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
},
}),
_ => panic!("Could not parse inspector message"),
},
};
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
self
.response_tx_map
.remove(&msg_id)
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
.unwrap()
.send(message)
.unwrap();
} else {
let message = serde_json::from_str(&inspector_msg.content).unwrap();
// Ignore if the receiver has been dropped.
let _ = self.notification_tx.unbounded_send(message);
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}
}
}
fn new_box_with<T>(new_fn: impl FnOnce(*mut T) -> T) -> Box<T> {
let b = Box::new(MaybeUninit::<T>::uninit());
let p = Box::into_raw(b) as *mut T;
// SAFETY: memory layout for `T` is ensured on first line of this function
unsafe {
ptr::write(p, new_fn(p));
Box::from_raw(p)
}
refactor: Rewrite Inspector implementation (#10725) This commit refactors implementation of inspector. The intention is to be able to move inspector implementation to "deno_core". Following things were done to make that possible: * "runtime/inspector.rs" was split into "runtime/inspector/mod.rs" and "runtime/inspector/server.rs", separating inspector implementation from Websocket server implementation. * "DenoInspector" was renamed to "JsRuntimeInspector" and reference to "server" was removed from the structure, making it independent of Websocket server used to connect to Chrome Devtools. * "WebsocketSession" was renamed to "InspectorSession" and rewritten in such a way that it's not tied to Websockets anymore; instead it accepts a pair of "proxy" channel ends that allow to integrate the session with different "transports". * "InspectorSession" was renamed to "LocalInspectorSession" to better indicate that it's an "in-memory" session and doesn't require Websocket server. It was also rewritten in such a way that it uses "InspectorSession" from previous point instead of reimplementing "v8::inspector::ChannelImpl" trait; this is done by using the "proxy" channels to communicate with the V8 session. Consequently "LocalInspectorSession" is now a frontend to "InspectorSession". This introduces a small inconvenience that awaiting responses for "LocalInspectorSession" requires to concurrently poll worker's event loop. This arises from the fact that "InspectorSession" is now owned by "JsRuntimeInspector", which in turn is owned by "Worker" or "WebWorker". To ease this situation "Worker::with_event_loop" helper method was added, that takes a future and concurrently polls it along with the event loop (using "tokio::select!" macro inside a loop).
2021-05-26 11:47:33 -04:00
}