1
0
Fork 0
mirror of https://github.com/denoland/deno.git synced 2024-12-19 05:45:09 -05:00
denoland-deno/cli/tools/test/reporters/junit.rs

440 lines
12 KiB
Rust
Raw Normal View History

// Copyright 2018-2024 the Deno authors. All rights reserved. MIT license.
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
use std::collections::VecDeque;
use std::path::PathBuf;
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
use super::fmt::to_relative_path_or_remote_url;
use super::*;
pub struct JunitTestReporter {
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
cwd: Url,
output_path: String,
// Stores TestCases (i.e. Tests) by the Test ID
cases: IndexMap<usize, quick_junit::TestCase>,
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
// Stores nodes representing test cases in such a way that can be traversed
// from child to parent to build the full test name that reflects the test
// hierarchy.
test_name_tree: TestNameTree,
failure_format_options: TestFailureFormatOptions,
}
impl JunitTestReporter {
pub fn new(
cwd: Url,
output_path: String,
failure_format_options: TestFailureFormatOptions,
) -> Self {
Self {
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
cwd,
output_path,
cases: IndexMap::new(),
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
test_name_tree: TestNameTree::new(),
failure_format_options,
}
}
fn convert_status(
status: &TestResult,
failure_format_options: &TestFailureFormatOptions,
) -> quick_junit::TestCaseStatus {
match status {
TestResult::Ok => quick_junit::TestCaseStatus::success(),
TestResult::Ignored => quick_junit::TestCaseStatus::skipped(),
TestResult::Failed(failure) => quick_junit::TestCaseStatus::NonSuccess {
kind: quick_junit::NonSuccessKind::Failure,
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
message: Some(failure.overview()),
ty: None,
description: Some(failure.format(failure_format_options).into_owned()),
reruns: vec![],
},
TestResult::Cancelled => quick_junit::TestCaseStatus::NonSuccess {
kind: quick_junit::NonSuccessKind::Error,
message: Some("Cancelled".to_string()),
ty: None,
description: None,
reruns: vec![],
},
}
}
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
fn convert_step_status(
status: &TestStepResult,
failure_format_options: &TestFailureFormatOptions,
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
) -> quick_junit::TestCaseStatus {
match status {
TestStepResult::Ok => quick_junit::TestCaseStatus::success(),
TestStepResult::Ignored => quick_junit::TestCaseStatus::skipped(),
TestStepResult::Failed(failure) => {
quick_junit::TestCaseStatus::NonSuccess {
kind: quick_junit::NonSuccessKind::Failure,
message: Some(failure.overview()),
ty: None,
description: Some(
failure.format(failure_format_options).into_owned(),
),
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
reruns: vec![],
}
}
}
}
}
impl TestReporter for JunitTestReporter {
fn report_register(&mut self, description: &TestDescription) {
let mut case = quick_junit::TestCase::new(
description.name.clone(),
quick_junit::TestCaseStatus::skipped(),
);
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
case.classname = Some(to_relative_path_or_remote_url(
&self.cwd,
&description.location.file_name,
));
case.extra.insert(
String::from("line"),
description.location.line_number.to_string(),
);
case.extra.insert(
String::from("col"),
description.location.column_number.to_string(),
);
self.cases.insert(description.id, case);
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
self.test_name_tree.add_node(description.clone().into());
}
fn report_plan(&mut self, _plan: &TestPlan) {}
fn report_slow(&mut self, _description: &TestDescription, _elapsed: u64) {}
fn report_wait(&mut self, _description: &TestDescription) {}
fn report_output(&mut self, _output: &[u8]) {
/*
TODO(skycoop): Right now I can't include stdout/stderr in the report because
we have a global pair of output streams that don't differentiate between the
output of different tests. This is a nice to have feature, so we can come
back to it later
*/
}
fn report_result(
&mut self,
description: &TestDescription,
result: &TestResult,
elapsed: u64,
) {
if let Some(case) = self.cases.get_mut(&description.id) {
case.status = Self::convert_status(result, &self.failure_format_options);
case.set_time(Duration::from_millis(elapsed));
}
}
fn report_uncaught_error(&mut self, _origin: &str, _error: Box<JsError>) {}
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
fn report_step_register(&mut self, description: &TestStepDescription) {
self.test_name_tree.add_node(description.clone().into());
let test_case_name =
self.test_name_tree.construct_full_test_name(description.id);
let mut case = quick_junit::TestCase::new(
test_case_name,
quick_junit::TestCaseStatus::skipped(),
);
case.classname = Some(to_relative_path_or_remote_url(
&self.cwd,
&description.location.file_name,
));
case.extra.insert(
String::from("line"),
description.location.line_number.to_string(),
);
case.extra.insert(
String::from("col"),
description.location.column_number.to_string(),
);
self.cases.insert(description.id, case);
}
fn report_step_wait(&mut self, _description: &TestStepDescription) {}
fn report_step_result(
&mut self,
description: &TestStepDescription,
result: &TestStepResult,
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
elapsed: u64,
_tests: &IndexMap<usize, TestDescription>,
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
_test_steps: &IndexMap<usize, TestStepDescription>,
) {
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
if let Some(case) = self.cases.get_mut(&description.id) {
case.status =
Self::convert_step_status(result, &self.failure_format_options);
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
case.set_time(Duration::from_millis(elapsed));
}
}
fn report_summary(
&mut self,
_elapsed: &Duration,
_tests: &IndexMap<usize, TestDescription>,
_test_steps: &IndexMap<usize, TestStepDescription>,
) {
}
fn report_sigint(
&mut self,
tests_pending: &HashSet<usize>,
tests: &IndexMap<usize, TestDescription>,
_test_steps: &IndexMap<usize, TestStepDescription>,
) {
for id in tests_pending {
if let Some(description) = tests.get(id) {
self.report_result(description, &TestResult::Cancelled, 0)
}
}
}
fn report_completed(&mut self) {
// TODO(mmastrac): This reporter does not handle stdout/stderr yet, and when we do, we may need to redirect
// pre-and-post-test output somewhere.
}
fn flush_report(
&mut self,
elapsed: &Duration,
tests: &IndexMap<usize, TestDescription>,
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
test_steps: &IndexMap<usize, TestStepDescription>,
) -> anyhow::Result<()> {
let mut suites: IndexMap<String, quick_junit::TestSuite> = IndexMap::new();
for (id, case) in &self.cases {
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
let abs_filename = match (tests.get(id), test_steps.get(id)) {
(Some(test), _) => &test.location.file_name,
(_, Some(step)) => &step.location.file_name,
(None, None) => {
unreachable!("Unknown test ID '{id}' provided");
}
};
let filename = to_relative_path_or_remote_url(&self.cwd, abs_filename);
suites
.entry(filename.clone())
.and_modify(|s| {
s.add_test_case(case.clone());
})
.or_insert_with(|| {
let mut suite = quick_junit::TestSuite::new(filename);
suite.add_test_case(case.clone());
suite
});
}
let mut report = quick_junit::Report::new("deno test");
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
report
.set_time(*elapsed)
.add_test_suites(suites.into_values());
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
if self.output_path == "-" {
report
.serialize(std::io::stdout())
.with_context(|| "Failed to write JUnit report to stdout")?;
} else {
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
let file =
crate::util::fs::create_file(&PathBuf::from(&self.output_path))
.context("Failed to open JUnit report file.")?;
report.serialize(file).with_context(|| {
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
format!("Failed to write JUnit report to {}", self.output_path)
})?;
}
Ok(())
}
}
fix(cli): output more detailed information for steps when using JUnit reporter (#22797) This patch gets JUnit reporter to output more detailed information for test steps (subtests). ## Issue with previous implementation In the previous implementation, the test hierarchy was represented using several XML tags like the following: - `<testsuites>` corresponds to the entire test (one execution of `deno test` has exactly one `<testsuites>` tag) - `<testsuite>` corresponds to one file, such as `main_test.ts` - `<testcase>` corresponds to one `Deno.test(...)` - `<property>` corresponds to one `t.step(...)` This structure describes the test layers but one problem is that `<property>` tag is used for any use cases so some tools that can ingest a JUnit XML file might not be able to interpret `<property>` as subtests. ## How other tools address it Some of the testing frameworks in the ecosystem address this issue by fitting subtests into the `<testcase>` layer. For instance, take a look at the following Go test file: ```go package main_test import "testing" func TestMain(t *testing.T) { t.Run("child 1", func(t *testing.T) { // OK }) t.Run("child 2", func(t *testing.T) { // Error t.Fatal("error") }) } ``` Running [gotestsum], we can get the output like this: ```xml <?xml version="1.0" encoding="UTF-8"?> <testsuites tests="3" failures="2" errors="0" time="1.013694"> <testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00"> <properties> <property name="go.version" value="go1.22.1 darwin/arm64"></property> </properties> <testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain/child_2&#xA; main_test.go:12: error&#xA;--- FAIL: TestMain/child_2 (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain" time="0.000000"> <failure message="Failed" type="">=== RUN TestMain&#xA;--- FAIL: TestMain (0.00s)&#xA;</failure> </testcase> <testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase> </testsuite> </testsuites> ``` This output shows that nested test cases are squashed into the `<testcase>` layer by treating them as the same layer as their parent, `TestMain`. We can still distinguish nested ones by their `name` attributes that look like `TestMain/<subtest_name>`. As described in #22795, [vitest] solves the issue in the same way as [gotestsum]. One downside of this would be that one test failure that happens in a nested test case will end up being counted multiple times, because not only the subtest but also its wrapping container(s) are considered to be failures. In fact, in the [gotestsum] output above, `TestMain/child_2` failed (which is totally expected) while its parent, `TestMain`, was also counted as failure. As https://github.com/denoland/deno/pull/20273#discussion_r1307558757 pointed out, there is a test runner that offers flexibility to prevent this, but I personally don't think the "duplicate failure count" issue is a big deal. ## How to fix the issue in this patch This patch fixes the issue with the same approach as [gotestsum] and [vitest]. More specifically, nested test cases are put into the `<testcase>` level and their names are now represented as squashed test names concatenated by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also allows us to put a detailed error message as `<failure>` tag within the `<testcase>` tag, which should be handled nicely by third-party tools supporting JUnit XML. ## Extra fix Also, file paths embedded into XML outputs are changed from absolute path to relative path, which is helpful when running the test suites in several different environments like CI. Resolves #22795 [gotestsum]: https://github.com/gotestyourself/gotestsum [vitest]: https://vitest.dev/ --------- Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
2024-03-25 11:08:46 -04:00
#[derive(Debug, Default)]
struct TestNameTree(IndexMap<usize, TestNameTreeNode>);
impl TestNameTree {
fn new() -> Self {
// Pre-allocate some space to avoid excessive reallocations.
Self(IndexMap::with_capacity(256))
}
fn add_node(&mut self, node: TestNameTreeNode) {
self.0.insert(node.id, node);
}
/// Constructs the full test name by traversing the tree from the specified
/// node as a child to its parent nodes.
/// If the provided ID is not found in the tree, or the tree is broken (e.g.
/// a child node refers to a parent node that doesn't exist), this method
/// just panics.
fn construct_full_test_name(&self, id: usize) -> String {
let mut current_id = Some(id);
let mut name_pieces = VecDeque::new();
loop {
let Some(id) = current_id else {
break;
};
let Some(node) = self.0.get(&id) else {
// The ID specified as a parent node by the child node should exist in
// the tree, but it doesn't. In this case we give up constructing the
// full test name.
unreachable!("Unregistered test ID '{id}' provided");
};
name_pieces.push_front(node.test_name.as_str());
current_id = node.parent_id;
}
if name_pieces.is_empty() {
unreachable!("Unregistered test ID '{id}' provided");
}
let v: Vec<_> = name_pieces.into();
v.join(" > ")
}
}
#[derive(Debug)]
struct TestNameTreeNode {
id: usize,
parent_id: Option<usize>,
test_name: String,
}
impl From<TestDescription> for TestNameTreeNode {
fn from(description: TestDescription) -> Self {
Self {
id: description.id,
parent_id: None,
test_name: description.name,
}
}
}
impl From<TestStepDescription> for TestNameTreeNode {
fn from(description: TestStepDescription) -> Self {
Self {
id: description.id,
parent_id: Some(description.parent_id),
test_name: description.name,
}
}
}
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn construct_full_test_name_one_node() {
let mut tree = TestNameTree::new();
tree.add_node(TestNameTreeNode {
id: 0,
parent_id: None,
test_name: "root".to_string(),
});
assert_eq!(tree.construct_full_test_name(0), "root".to_string());
}
#[test]
fn construct_full_test_name_two_level_hierarchy() {
let mut tree = TestNameTree::new();
tree.add_node(TestNameTreeNode {
id: 0,
parent_id: None,
test_name: "root".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 1,
parent_id: Some(0),
test_name: "child".to_string(),
});
assert_eq!(tree.construct_full_test_name(0), "root".to_string());
assert_eq!(tree.construct_full_test_name(1), "root > child".to_string());
}
#[test]
fn construct_full_test_name_three_level_hierarchy() {
let mut tree = TestNameTree::new();
tree.add_node(TestNameTreeNode {
id: 0,
parent_id: None,
test_name: "root".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 1,
parent_id: Some(0),
test_name: "child".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 2,
parent_id: Some(1),
test_name: "grandchild".to_string(),
});
assert_eq!(tree.construct_full_test_name(0), "root".to_string());
assert_eq!(tree.construct_full_test_name(1), "root > child".to_string());
assert_eq!(
tree.construct_full_test_name(2),
"root > child > grandchild".to_string()
);
}
#[test]
fn construct_full_test_name_one_root_two_chains() {
// 0
// / \
// 1 2
// / \
// 3 4
let mut tree = TestNameTree::new();
tree.add_node(TestNameTreeNode {
id: 0,
parent_id: None,
test_name: "root".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 1,
parent_id: Some(0),
test_name: "child 1".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 2,
parent_id: Some(0),
test_name: "child 2".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 3,
parent_id: Some(1),
test_name: "grandchild 1".to_string(),
});
tree.add_node(TestNameTreeNode {
id: 4,
parent_id: Some(1),
test_name: "grandchild 2".to_string(),
});
assert_eq!(tree.construct_full_test_name(0), "root".to_string());
assert_eq!(
tree.construct_full_test_name(1),
"root > child 1".to_string(),
);
assert_eq!(
tree.construct_full_test_name(2),
"root > child 2".to_string(),
);
assert_eq!(
tree.construct_full_test_name(3),
"root > child 1 > grandchild 1".to_string(),
);
assert_eq!(
tree.construct_full_test_name(4),
"root > child 1 > grandchild 2".to_string(),
);
}
}