… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
This cleans up `JsRuntime` a bit more:
* We no longer print cargo's rerun-if-changed messages in `JsRuntime` --
those are printed elsewhere
* We no longer special case the OwnedIsolate for snapshots. Instead we
make use of an inner object that has the `Drop` impl and allows us to
`std::mem::forget` it if we need to extract the isolate for a snapshot
* The `snapshot` method is only available on `JsRuntimeForSnapshot`, not
`JsRuntime`.
* `OpState` construction is slightly cleaner, though I'd still like to
extract more
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
This now allows circular imports across extensions.
Instead of load + eval of all ESM files in declaration order, all files
are only loaded. Eval is done recursively by V8, only evaluating
files that are listed in `Extension::esm_entry_point` fields.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
1. Boxed `File` and `FileSystem` to allow more easily passing this
through the CLI code (as shown within this pr).
2. `StdFileResource` is now `FileResource`. `FileResource` now contains
an `Rc<dyn File>`.
We can make `NodePermissions` rely on interior mutability (which the
`PermissionsContainer` is already doing) in order to not have to clone
everything all the time. This also reduces the chance of an accidental
`borrow` while `borrrow_mut`.
This commit abstracts out the specifics of the underlying system calls
FS operations behind a new `FileSystem` and `File` trait in the
`ext/fs` extension.
This allows other embedders to re-use ext/fs, but substituting in a
different FS backend.
This is likely not the final form of these traits. Eventually they will
be entirely `deno_core::Resource` agnostic, and will live in a seperate
crate.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is a follow-on to the earlier work in reducing string copies,
mainly focused on ensuring that ASCII strings are easy to provide to the
JS runtime.
While we are replacing a 16-byte reference in a number of places with a
24-byte structure (measured via `std::mem::size_of`), the reduction in
copies wins out over the additional size of the arguments passed into
functions.
Benchmarking shows approximately the same if not slightly less wallclock
time/instructions retired, but I believe this continues to open up
further refactoring opportunities.
This commit adds associated type to "NodeEnv" trait, called "Fs".
The "Fs" type has a trait bound on "NodeFs", which specifies APIs
required for all ops and resolution APIs to function.
A "RealFs" implementation of "NodeFs" is exported from the "deno_node"
crate, that provides a default implementation for the trait.
All code in "deno_node" extension was changed to use the "NodeFs" trait
to handle file system operations, instead of relying on APIs from the
standard library.
This commit changes the type parameter for "deno_node" extension, from
`P: NodePermission` to `Env: NodeEnv`.
`NodeEnv` is a new trait that has associated type `P: NodePermission`.
This is a stepping stone to support swappable file system for the
extension, that will be added as a second associated type to the
`NodeEnv` trait.
This will improve diagnostics and catch any non-ASCII extension code
early.
This will use `debug_assert!` rather than `assert!` to avoid runtime
costs, and ensures (in debug_assert mode only) that all extension source
files are ASCII as we load them.
This commit adds unstable "Deno.openKv()" API that allows to open
a key-value database at a specified path.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Reduce the number of copies and allocations of script code by carrying
around ownership/reference information from creation time.
As an advantage, this allows us to maintain the identity of `&'static
str`-based scripts and use v8's external 1-byte strings (to avoid
incorrectly passing non-ASCII strings, debug `assert!`s gate all string
reference paths).
Benchmark results:
Perf improvements -- ~0.1 - 0.2ms faster, but should reduce garbage
w/external strings and reduces data copies overall. May also unlock some
more interesting optimizations in the future.
This requires adding some generics to functions, but manual
monomorphization has been applied (outer/inner function) to avoid code
bloat.
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit removes compression for the runtime JS code.
It means that we will have a bigger binary, but faster startup. After
several discussion in the CLI team we decided it's worth to trade
about 3Mb of binary size for 2ms faster startup time. With WebGPU
removed in 35196eab27
it shouldn't have such a big impact on the binary size.
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
To be able to preserve "Deno.core.ops" we need to ensure that
ops are registered in the same order in various places, otherwise
we will get mismatch in external references ordering.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit partially reverts changes from
https://github.com/denoland/deno/pull/18095.
Turns out I made a mistake that became apparent when working
on removing "RuntimeOptions::extensions_with_js" in a follow up.
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
Since we are snapshotting extension source at build time, there's no
need to define list of sources for the extension at runtime.
This commit changes "deno_node" extension by removing "init_polyfill"
function in favor of "init_polyfill_ops_and_esm()" and "init_polyfill_ops()".
The former is used during snapshot and when "deno_runtime" is compiled
with "dont_create_runtime_snapshot" cargo feature flag. The latter is used
when running a worker from an existing snapshot.
This is a start of a bigger refactor to all extensions - thanks to this
change, we don't have to iterate over all defined source files for extension at
runtime, and because of that we don't have to create a filepath for each of the
source files. It's not a big deal, but we are iterating over 300 files on each start,
and concatenating 3 strings before creating a "PathBuf" for ~200 of them.
This is already visible on the startup flamegraphs and should be avoided.
We use information about build in several extension crates like
"ext/node" or "runtime/". In an effort to move "fs" APIs to a separate
crate it is a prerequisite to have this information available outside
of the "runtime/" crate.
This commit moves definition of "build" object to "Deno.core" that is
later forwarded to "Deno.build".
This commit merges "runtime/js/40_spawn.js" into
"runtime/js/40_process.js", and "runtime::ops::spawn"
into "runtime::ops::process".
It makes little sense to have them separated given that we want to
factor out these APIs into a separate extension crate.
JavaScript APIs from "runtime/js/40_files.js" combined abstractions
for stdio streams ("Stdout", "Stderr", "Stdin") and file system file
("File", "FsFile"). APIs from "runtime/js/40_read_file.js" and
"runtime/js/40_write_file.js" were implemented using ops from
"runtime/ops/fs.rs".
This file was removed and relevant APIs were moved to "deno_io/12_io.js"
and "runtime/js/30_fs.js".
This work is meant to enable factoring out "deno_fs" crate.
This file was not used anywhere - even though it exposed an unstable
"Deno.DiagnosticCategory" API. Seems like a left over from when we
had "Deno.emit" API.
This allows to not include source code into the binary (because
it will already be included in the V8 snapshot).
Nothing changes for the embedders - everything should still build the
same.
This commit brings the binary size from 87Mb to 82Mb on M1.
Alternative to https://github.com/denoland/deno/pull/17820 and
https://github.com/denoland/deno/pull/17653
---------
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
This commit changes definition of "ExtensionFileSource", by changing
"code" field to being "ExtensionFileSourceCode" enum. Currently the enum
has only a single variant "IncludedInBinary". It is done in preparation
to allow embedders to decide if they want to include the source code in the
binary when snapshotting (in most cases they shouldn't do that).
In the follow up commit we'll add more variants to
"ExtensionFileSourceCode".
"include_js_files_dir!" macro was removed in favor "include_js_files!"
macro which can now accept "dir" option.
This commit moves "deno_std/node" in "ext/node" crate. The code is
transpiled and snapshotted during the build process.
During the first pass a minimal amount of work was done to create the
snapshot, a lot of code in "ext/node" depends on presence of "Deno"
global. This code will be gradually fixed in the follow up PRs to migrate
it to import relevant APIs from "internal:" modules.
Currently the code from snapshot is not used in any way, and all
Node/npm compatibility still uses code from
"https://deno.land/std/node" (or from the location specified by
"DENO_NODE_COMPAT_URL"). This will also be handled in a follow
up PRs.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This commit stabilizes Node-API, the "--unstable" flag is no longer
required to load native extensions. "--allow-ffi" permission is still
required to load them.
This is a proof of concept for being able to snapshot TypeScript files.
Currently only a single runtime file is authored in TypeScript -
"runtime/js/01_version.ts".
Not needed infrastructure was removed from "core/snapshot_util.rs".
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
