This was initially added in #25399 in order to make transitioning over
from package.json to deno.json more easy, but it causes some problems
that are shown in the issue and it also means that the output of `deno
install` would have different resolution than `npm install`. Overall, I
think it's too much complexity to be smarter about this and it's
probably best to not do it. If someone needs an aliased folder then they
should keep using a package.json
Closes #25538
The `.parse()` calls in permission code are only making it more
confusing, verbosity
is encouraged and welcome in this code even at the cost of not being
concise.
Left a couple TODOs to not use `AnyError`.
This allows using npm deps of jsr deps without having to add them to the
root package.json.
Works by taking the package requirement and scanning the
`node_modules/.deno` directory for the best matching package, so it
relies on deno's node_modules structure.
Additionally to make the transition from package.json to deno.json
easier, Deno now:
1. Installs npm deps in a deno.json at the same time as installing npm
deps from a package.json.
2. Uses the alias in the import map for `node_modules/<alias>` for
better package.json compatiblity.
`--allow-run` even with an allow list has essentially been
`--allow-all`... this locks it down more.
1. Resolves allow list for `--allow-run=` on startup to an absolute
path, then uses these paths when evaluating if a command can execute.
Also, adds these paths to `--deny-write`
1. Resolves the environment (cwd and env vars) before evaluating
permissions and before executing a command. Then uses this environment
to evaluate the permissions and then evaluate the command.
Remove `--allow-hrtime` and `--deny-hrtime`. We are doing this because
it is already possible to get access to high resolution timers through
workers and SharedArrayBuffer.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit hides following unstable flags:
- `--unstable-ffi` (the API is now stable)
- `--unstable-webgpu` (this API is now stable)
- `--unstable-fs` (no more unstable APIs)
- `--unstable-byonm` (BYONM is on by default)
The flags are still parseable, but they are not used. Concrete cleanup
will be done in a follow up PR.
`deno bundle` now produces:
```
error: ⚠️ `deno bundle` was removed in Deno 2.
See the Deno 1.x to 2.x Migration Guide for migration instructions: https://docs.deno.com/runtime/manual/advanced/migrate_deprecations
```
`deno bundle --help` now produces:
```
⚠️ `deno bundle` was removed in Deno 2.
See the Deno 1.x to 2.x Migration Guide for migration instructions: https://docs.deno.com/runtime/manual/advanced/migrate_deprecations
Usage: deno bundle [OPTIONS]
Options:
-q, --quiet Suppress diagnostic output
--unstable Enable all unstable features and APIs. Instead of using this flag, consider enabling individual unstable features
To view the list of individual unstable feature flags, run this command again with --help=unstable
```
Before:
```
$ deno upgrade v1.xx
error: Invalid version passed
```
After:
```
$ deno upgrade v1.xx
error: Invalid version passed (v1.xx)
Example usage:
deno upgrade | deno upgrade 1.46 | deno upgrade canary
```
Also updates help text to use "shorthand version" without flags, but a
positional arg.
This commit effectively turns Deno into Deno 2.0.
This is done by forcing `DENO_FUTURE=1` env var, that was available in
the past few months to try Deno 2 changes.
This commit contains several breaking changes scheduled for Deno 2:
- all deprecated JavaScript APIs are not available any more, mostly
`Deno.*` APIs
- `window` global is removed
- FFI, WebGPU and FS APIs are now stable and don't require
`--unstable-*` flags
- import assertions are no longer supported
- "bring your own node modules" is enabled by default
This is the first commit in a series that are scheduled before the Deno
2 release.
Follow up work is tracked in
https://github.com/denoland/deno/issues/25241.
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Co-authored-by: Nathan Whitaker <nathan@deno.com>
Stores normalized version constraints in the lockfile, which will
improve reproducibility and will fix a bug with duplicate specifiers
ending up in the lockfile. Also, gets rid of some duplicate data in the
specifiers area of the lockfile.
This commit remove `--lock-write` that was deprecated in v1.45 release.
Closes https://github.com/denoland/deno/issues/24167.
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
Closes #25210 .
Removed --unstable-http from being displayed on deno run --help=unstable
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
- rewrite flag help
- use gray for indentation
- reorganize permission flags and split them up
- make help subcommand act like help flag
- `deno run` outputs list of tasks
- Fixes #25120
error handling for `deno run` in case of no config file being found
needs to be improved
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit changes `deno upgrade` subcommand to accept
a positional argument that can be either a version, release channel
name or a git hash, making invocations of `deno upgrade` much
more concise:
```
# before
$ deno upgrade --version 1.46.0
# after
$ deno upgrade 1.46.0
```
```
# before
$ deno upgrade --canary
# after
$ deno upgrade canary
```
```
# specific canary version before
$ deno upgrade --canary --version f042c39180
# after
$ deno upgrade f042c39180
```
Old flags are still supported, but hidden from the help output.
- Update ffi turbocall to use revised fast call api
- Remove `v8_version` function calls
- `*mut OwnedIsolate` is no longer stored in OpCtx gotham store
Permission flags are unified in a clearer and concise output.
Unstable flags are hidden by default with exception of the `unstable`
flag itself. the remaining unstable flags can be seen with a
`--help=unstable`.
This also cleans up to show unstable flags only for subcommands that
actually need them.
Also sorts flags alphabetically, and gorups various flags together in a
set of categories.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
This change improves the Node.js compatibility in managed npm resolution
mode by disabling the discovery of `node_modules` when the
main specifier is inside of `DENO_DIR`.
closes #22732
closes #24589
This commit rewrites the internal `version` module that exported
various information about the current executable. Instead of exporting
several consts, we are now exporting a single const structure that
contains all the necessary information.
This is the first step towards cleaning up how we use this information
and should allow us to use SUI to be able to patch this information
in already produced binary making it easier to cut new releases.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
In preparation for https://github.com/denoland/deno/pull/25014, this
commit removes public `is_canary()` method and instead uses an enum
`ReleaseChannel` to be able to designate more "kinds" of builds.
Adds a `parallel` flag to `deno serve`. When present, we spawn multiple
workers to parallelize serving requests.
```bash
deno serve --parallel main.ts
```
Currently on linux we use `SO_REUSEPORT` and rely on the fact that the
kernel will distribute connections in a round-robin manner.
On mac and windows, we sort of emulate this by cloning the underlying
file descriptor and passing a handle to each worker. The connections
will not be guaranteed to be fairly distributed (and in practice almost
certainly won't be), but the distribution is still spread enough to
provide a significant performance increase.
---
(Run on an Macbook Pro with an M3 Max, serving `deno.com`
baseline::
```
❯ wrk -d 30s -c 125 --latency http://127.0.0.1:8000
Running 30s test @ http://127.0.0.1:8000
2 threads and 125 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 239.78ms 13.56ms 330.54ms 79.12%
Req/Sec 258.58 35.56 360.00 70.64%
Latency Distribution
50% 236.72ms
75% 248.46ms
90% 256.84ms
99% 268.23ms
15458 requests in 30.02s, 2.47GB read
Requests/sec: 514.89
Transfer/sec: 84.33MB
```
this PR (`with --parallel` flag)
```
❯ wrk -d 30s -c 125 --latency http://127.0.0.1:8000
Running 30s test @ http://127.0.0.1:8000
2 threads and 125 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 117.40ms 142.84ms 590.45ms 79.07%
Req/Sec 1.33k 175.19 1.77k 69.00%
Latency Distribution
50% 22.34ms
75% 223.67ms
90% 357.32ms
99% 460.50ms
79636 requests in 30.07s, 12.74GB read
Requests/sec: 2647.96
Transfer/sec: 433.71MB
```
This commit adds capability to format HTML, Svelte, Vue, Astro and Angular
files.
"--unstable-html" is required to format HTML files, and "--unstable-component"
flag is needed to format other formats. These can also be specified in the config
file.
Close #25015
This commit changes how system certificates are loaded on startup.
Instead of hard erroring if a certificate can't be decoded, we are now
printing a warning and bumping a hex representation of the certificate
and continue execution.
Ref https://github.com/denoland/deno/issues/24137
This commit adds the "--rc" flag to "deno upgrade" subcommand.
This flag allows to upgrade to the latest "release candidate" release.
The update checker was also updated to take this into account.
This commit stabilizes HMR functionality and renames
`--unstable-hmr` to `--watch-hmr`. The `--unstable-hmr`
flag is still working, but hidden from the help output.
It will be removed in Deno 2.
Once https://github.com/denoland/deno/pull/24958 lands
we should improve grouping of `--watch` and `--watch-hmr`
flags.
This PR integrates [Malva](https://github.com/g-plane/malva) into `deno
fmt`, which introduces the ability to format CSS, SCSS, Sass and Less
files.
On Linux x64 6.10, this PR increases about 800KiB:
```
❯ wc -c target/release/deno
125168728 target/release/deno
❯ wc -c target/release/deno
124349456 target/release/deno
```
This commit adds "--serve" flag to "deno init" subcommand,
that provides a template for quick starting a project using
"deno serve".
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This commit adds short CLI flags for following permission flags:
- "-R" for "--allow-read"
- "-W" for "--allow-write"
- "-E" for "--allow-env"
- "-N" for "--allow-net"
- "-S" for "--allow-sys"
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This moves YAML formatting behind an unstable flag for Deno 1.46. This
will make it opt-in to start and then we can remove the flag to make it
on by default in version of Deno after that.
This can be specified by doing `deno fmt --unstable-yaml` or by
specifying the following in a deno.json file:
```json
{
"unstable": ["fmt-yaml"]
}
```
Fixes https://github.com/denoland/deno/issues/24756. Fixes
https://github.com/denoland/deno/issues/24796.
This also gets vitest working when using
[`--pool=forks`](https://vitest.dev/guide/improving-performance#pool)
(which is the default as of vitest 2.0). Ref
https://github.com/denoland/deno/issues/23882.
---
This PR resolves a handful of issues with child_process IPC. In
particular:
- We didn't support sending typed array views over IPC
- Opening an IPC channel resulted in the event loop never exiting
- Sending a `null` over IPC would terminate the channel
- There was some UB in the read implementation (transmuting an `&[u8]`
to `&mut [u8]`)
- The `send` method wasn't returning anything, so there was no way to
signal backpressure (this also resulted in the benchmark
`child_process_ipc.mjs` being misleading, as it tried to respect
backpressure. That gave node much worse results at larger message sizes,
and gave us much worse results at smaller message sizes).
- We weren't setting up the `channel` property on the `process` global
(or on the `ChildProcess` object), and also didn't have a way to
ref/unref the channel
- Calling `kill` multiple times (or disconnecting the channel, then
calling kill) would throw an error
- Node couldn't spawn a deno subprocess and communicate with it over IPC
```
> deno upgrade
error: Unsupported lockfile version 'invalid'. Try upgrading Deno or recreating the lockfile.
V:\scratch
> V:\deno\target\debug\deno upgrade
Looking up latest version
Local deno version 1.45.3 is the most recent release
```
Closes #24517
Closes #20729
This is in preparation for extracting out node resolution code from
ext/node (which is something I'm going to do gradually over time).
Uses https://github.com/denoland/deno_package_json
This commit fixes memory leak described in
https://github.com/denoland/deno/issues/24380.
This is done by upgrading following crates:
- deno_ast
- deno_graph
- eszip
- dprint-plugin-typescript
- deno_lint
- deno_doc
- deno_emit
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
This commit deprecates `deno vendor` subcommand in favor
of using `--vendor` flag or `"vendor": true` setting in the config file.
The subcommand is still available (until Deno 2) but is hidden from
the help output.
Closes #20584
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The `jest` test runner popularized putting tests into a `__tests__`
folder. Whilst many have switched to going with a `.test` suffix in the
file name these days, there are still many jest projects that have
`__tests__`. By adding this to the default test detection logic it makes
`deno test` discover those out of the box.
Also don't panic on invalid domain names and addresses.
Extracted with cleanups up from #24080
Co-authored-by: Yazan AbdAl-Rahman <yazan.abdalrahman@exalt.ps>
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
