Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
Currently the resolution for extension sources is different depending on
whether `include_js_files_for_snapshotting`
is enabled. If sources are embedded it uses `include_str!()` which is
module-relative. If sources are read at runtime paths are joined to
`CARGO_MANIFEST_DIR` and are package-relative. This makes them both
package-relative.
Fixes `cargo run -p deno_runtime --example extension_with_esm --features
include_js_files_for_snapshotting`.
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
Spend quite some time trying to get this working. With proper example
would have been a lot faster. So this is pr with the example. I also
rearranged examples a little bit to allow for addition of more examples
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
Fixes #18979.
This changes the predicate for allowing `ext:` specifier resolution from
`snapshot_loaded_and_not_snapshotting` to `ext_resolution_allowed` which
is only set to true during the extension module loading phase. Module
loaders as used in core
are now declared as `ExtModuleLoader` rather than `dyn ModuleLoader`.
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
```
Benchmark 1: deno run -A ../empty.js
Time (mean ± σ): 20.5 ms ± 0.5 ms [User: 13.4 ms, System: 5.1 ms]
Range (min … max): 19.8 ms … 24.0 ms 119 runs
Benchmark 2: target/release/deno run -A ../empty.js
Time (mean ± σ): 18.8 ms ± 0.3 ms [User: 13.0 ms, System: 4.9 ms]
Range (min … max): 18.3 ms … 19.9 ms 129 runs
```
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
This commit adds new "--inspect-wait" flag which works similarly
to "--inspect-brk" in that it waits for inspector session to be
established before running code. However it doesn't break on the first
statement of user code, but instead runs it as soon as a session
is established.
This PR makes it possible for applications to create workers from custom
snapshots to improve runtime performance (without having to fork/copy
`runtime/workers.rs`).
This commit:
- removes "fmt_errors::PrettyJsError" in favor of "format_js_error" fn
- removes "deno_core::JsError::create" and
"deno_core::RuntimeOptions::js_error_create_fn"
- adds new option to "deno_runtime::ops::worker_host::init"
The following transformations gradually faced by "JsError" have all been
moved up front to "JsError::from_v8_exception()":
- finding the first non-"deno:" source line;
- moving "JsError::script_resource_name" etc. into the first error stack
in case of syntax errors;
- source mapping "JsError::script_resource_name" etc. when wrapping
the error even though the frame locations are source mapped earlier;
- removing "JsError::{script_resource_name,line_number,start_column,end_column}"
entirely in favour of "js_error.frames.get(0)".
We also no longer pass a js-side callback to "core/02_error.js" from cli.
I avoided doing this on previous occasions because the source map lookups
were in an awkward place.
Adds another callback to WebWorkerOptions that allows to execute
some modules before actual worker code executes. This allows to set up Node
global using std/node.
This commit fixes a problem where loading and executing multiple
modules leads to all of the having "import.meta.main" set to true.
Following Rust APIs were deprecated:
- deno_core::JsRuntime::load_module
- deno_runtime::Worker::execute_module
- deno_runtime::WebWorker::execute_module
Following Rust APIs were added:
- deno_core::JsRuntime::load_main_module
- deno_core::JsRuntime::load_side_module
- deno_runtime::Worker::execute_main_module
- deno_runtime::Worker::execute_side_module
- deno_runtime::WebWorker::execute_main_module
Trying to load multiple "main" modules into the runtime now results in an
error. If user needs to load additional "non-main" modules they should use
APIs for "side" module.
This commit implements classic workers, but only when the `--enable-testing-features-do-not-use` flag is provided. This change is not user facing. Classic workers are used extensively in WPT tests. The classic workers do not support loading from disk, and do not support TypeScript.
Co-authored-by: Luca Casonato <hello@lcas.dev>
This commit adds "--unsafely-treat-insecure-origin-as-secure" flag
that allows to disable SSL verification for all domains, or specific
domains if they were passed as an argument to the flag.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit adds "DENO_TLS_CA_STORE" env variable to support
optionally loading certificates from the users local certificate store.
This will allow them to successfully connect via tls with corporate
and self signed certs provided they have them installed in their keystore.
It also allows them to deal with revoked certs by simply updating
their keystore without having to upgrade Deno.
Currently supported values are "mozilla", "system" or empty value.
