The `.parse()` calls in permission code are only making it more
confusing, verbosity
is encouraged and welcome in this code even at the cost of not being
concise.
Left a couple TODOs to not use `AnyError`.
```
$ cat exports_error.js
Object.defineProperty(exports, "__esModule", { value: true });
$ deno exports_error.js
error: Uncaught (in promise) ReferenceError: exports is not defined
Object.defineProperty(exports, "__esModule", { value: true });
^
at file:///exports_error.js:1:23
info: Deno doesn't support CommonJS modules without `.cjs` extension.
hint: Rewrite this module to ESM or change the file extension to `.cjs`.
```
`--allow-run` even with an allow list has essentially been
`--allow-all`... this locks it down more.
1. Resolves allow list for `--allow-run=` on startup to an absolute
path, then uses these paths when evaluating if a command can execute.
Also, adds these paths to `--deny-write`
1. Resolves the environment (cwd and env vars) before evaluating
permissions and before executing a command. Then uses this environment
to evaluate the permissions and then evaluate the command.
Remove `--allow-hrtime` and `--deny-hrtime`. We are doing this because
it is already possible to get access to high resolution timers through
workers and SharedArrayBuffer.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit hides following unstable flags:
- `--unstable-ffi` (the API is now stable)
- `--unstable-webgpu` (this API is now stable)
- `--unstable-fs` (no more unstable APIs)
- `--unstable-byonm` (BYONM is on by default)
The flags are still parseable, but they are not used. Concrete cleanup
will be done in a follow up PR.
Note: this is implemented on Deploy. However, according to @magurotuna,
a thin compatibility layer might be in the works that'd prevent
breakages for PRs such as this one.
Towards #22079
Turns out we only virtualized it so one could have a `Console` property,
and the other one not. We can just make this `console.Console` available
everywhere.
Closes #25210 .
Removed --unstable-http from being displayed on deno run --help=unstable
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit makes various limit parameters in `deno_kv` configurable.
Currently these values are declared as constants and thus can't be
modified from outside. However, there may be situations where we want to
change it. This commit makes this possible by introducing a new struct
`KvConfig` that needs to be given as the 2nd param in `init_ops`.
This commit deprecates "import assertions" proposal that has been
replaced with "import attributes".
Any time an import assertion is encountered a warning will be printed
to the terminal. This warning will be printed for both local and
remote files (ie. user code and dependencies).
Import assertions support will be removed in Deno 2.
- Update ffi turbocall to use revised fast call api
- Remove `v8_version` function calls
- `*mut OwnedIsolate` is no longer stored in OpCtx gotham store
This commit rewrites the internal `version` module that exported
various information about the current executable. Instead of exporting
several consts, we are now exporting a single const structure that
contains all the necessary information.
This is the first step towards cleaning up how we use this information
and should allow us to use SUI to be able to patch this information
in already produced binary making it easier to cut new releases.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Linux/macos only currently.
Part of https://github.com/denoland/deno/issues/23524 (fixes it on
platforms other than windows).
Part of #16899 (fixes it on platforms other than windows).
After this PR, playwright is functional on mac/linux.
Adds a `parallel` flag to `deno serve`. When present, we spawn multiple
workers to parallelize serving requests.
```bash
deno serve --parallel main.ts
```
Currently on linux we use `SO_REUSEPORT` and rely on the fact that the
kernel will distribute connections in a round-robin manner.
On mac and windows, we sort of emulate this by cloning the underlying
file descriptor and passing a handle to each worker. The connections
will not be guaranteed to be fairly distributed (and in practice almost
certainly won't be), but the distribution is still spread enough to
provide a significant performance increase.
---
(Run on an Macbook Pro with an M3 Max, serving `deno.com`
baseline::
```
❯ wrk -d 30s -c 125 --latency http://127.0.0.1:8000
Running 30s test @ http://127.0.0.1:8000
2 threads and 125 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 239.78ms 13.56ms 330.54ms 79.12%
Req/Sec 258.58 35.56 360.00 70.64%
Latency Distribution
50% 236.72ms
75% 248.46ms
90% 256.84ms
99% 268.23ms
15458 requests in 30.02s, 2.47GB read
Requests/sec: 514.89
Transfer/sec: 84.33MB
```
this PR (`with --parallel` flag)
```
❯ wrk -d 30s -c 125 --latency http://127.0.0.1:8000
Running 30s test @ http://127.0.0.1:8000
2 threads and 125 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 117.40ms 142.84ms 590.45ms 79.07%
Req/Sec 1.33k 175.19 1.77k 69.00%
Latency Distribution
50% 22.34ms
75% 223.67ms
90% 357.32ms
99% 460.50ms
79636 requests in 30.07s, 12.74GB read
Requests/sec: 2647.96
Transfer/sec: 433.71MB
```
This commit updates permission prompt to add a link
to the documentation for particular flag.
Additionally the box drawings around the prompt have been slightly
altered for better visibility.
<img width="737" alt="Screenshot 2024-08-08 at 12 42 32"
src="https://github.com/user-attachments/assets/6ae748cd-4f29-439d-b0ee-f28f565f211a">
This PR ensures that we forward a `rename` event in our file watcher.
The rust lib we use combines that with the `modify` event.
This fixes a compatibility issue with Node too, which sends the `rename`
event as well.
Fixes https://github.com/denoland/deno/issues/24880
Fixes https://github.com/denoland/deno/issues/24756. Fixes
https://github.com/denoland/deno/issues/24796.
This also gets vitest working when using
[`--pool=forks`](https://vitest.dev/guide/improving-performance#pool)
(which is the default as of vitest 2.0). Ref
https://github.com/denoland/deno/issues/23882.
---
This PR resolves a handful of issues with child_process IPC. In
particular:
- We didn't support sending typed array views over IPC
- Opening an IPC channel resulted in the event loop never exiting
- Sending a `null` over IPC would terminate the channel
- There was some UB in the read implementation (transmuting an `&[u8]`
to `&mut [u8]`)
- The `send` method wasn't returning anything, so there was no way to
signal backpressure (this also resulted in the benchmark
`child_process_ipc.mjs` being misleading, as it tried to respect
backpressure. That gave node much worse results at larger message sizes,
and gave us much worse results at smaller message sizes).
- We weren't setting up the `channel` property on the `process` global
(or on the `ChildProcess` object), and also didn't have a way to
ref/unref the channel
- Calling `kill` multiple times (or disconnecting the channel, then
calling kill) would throw an error
- Node couldn't spawn a deno subprocess and communicate with it over IPC
The intent is that those tests will be executed, but our check that the
files are up to date won't overwrite the contents of the tests. This is
useful when a test needs some manual edits to work.
It turns out we weren't actually running them.
---
This ended up turning into a couple of small bug fixes to get the tests
passing:
- We weren't canonicalizing the exec path properly (it sometimes still
had `..` or `.` in it)
- We weren't accepting strings in `process.exit`
There was one failure I couldn't figure out quickly, so I disabled the
test for now, and filed a follow up issue: #24694
This is the release commit being forwarded back to main for 1.45.3
---------
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Originally landed in
f6fd6619e7.
Reverted in https://github.com/denoland/deno/pull/24574.
This reland contains a fix that sends "Accept: */*" header for calls made
from "FileFetcher". Absence of this header made downloading source code
from JSR broken. This is tested by ensuring this header is present in the
test server that servers JSR packages.
---------
Co-authored-by: Sean McArthur <sean@seanmonstar.com>
This commit re-implements `ext/fetch` and all dependent crates
using `hyper` and `hyper-util`, instead of `reqwest`.
The reasoning is that we want to have greater control and access
to low level `hyper` APIs when implementing `fetch` API as well
as `node:http` module.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Fixes #24241
* Support "statfs", "username", "getPriority" and "setPriority" kinds
for `--allow-sys`.
* Check individual permissions in `node:os.userInfo()` instead of a
single "userInfo" permission.
* Check for "uid" permission in `node:process.geteuid()` instead of
"geteuid".
* Add missing "homedir" to `SysPermissionDescriptor.kind` union
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
Also don't panic on invalid domain names and addresses.
Extracted with cleanups up from #24080
Co-authored-by: Yazan AbdAl-Rahman <yazan.abdalrahman@exalt.ps>
Closes: https://github.com/denoland/deno/issues/22633
This commit adds support for `confirm` and `prompt` APIs,
that instead of reading from stdin are using notebook frontend
to show modal boxes and wait for answers.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is the release commit being forwarded back to main for 1.44.3
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
This is the release commit being forwarded back to main for 1.44.1
Co-authored-by: devsnek <devsnek@users.noreply.github.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
