This PR addresses many problems with module graph loading
introduced in #5029, as well as many long standing issues.
"ModuleGraphLoader" has been wired to "ModuleLoader" implemented
on "State" - that means that dependency analysis and fetching is done
before spinning up TS compiler worker.
Basic dependency tracking for TS compilation has been implemented.
Errors caused by import statements are now annotated with import
location.
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Since everything that Deno loads is treated as an ES Module,
it means that all code is treated as "use strict" except for
when using the REPL. This PR changes that so code in the
REPL is also always evaluated with "use strict". There are
also a couple other places where we load code as scripts
which should also use "use strict" just in case.
This commit changes how error occurring in SWC are handled.
Changed lexer settings to properly handle TS decorators.
Changed output of SWC error to annotate with position in file.
This commit fixes a bug introduced in #5029 that caused bad
handling of redirects during module analysis.
Also ensured that duplicate modules are not downloaded.
This commit completely overhauls how module analysis is
performed in TS compiler by moving the logic to Rust.
In the current setup module analysis is performed using
"ts.preProcessFile" API in a special TS compiler worker
running on a separate thread.
"ts.preProcessFile" allowed us to build a lot of functionality
in CLI including X-TypeScript-Types header support
and @deno-types directive support. Unfortunately at the
same time complexity of the ops required to perform
supporting tasks exploded and caused some hidden
permission escapes.
This PR introduces "ModuleGraphLoader" which can parse
source and load recursively all dependent source files; as
well as declaration files. All dependencies used in TS
compiler and now fetched and collected upfront in Rust
before spinning up TS compiler.
To achieve feature parity with existing APIs this commit
includes a lot of changes:
* add "ModuleGraphLoader"
- can fetch local and remote sources
- parses source code using SWC and extracts imports, exports, file references, special
headers
- this struct inherited all of the hidden complexity and cruft from TS version and requires
several follow up PRs
* rewrite cli/tsc.rs to perform module analysis upfront and send all required source code to
TS worker in one message
* remove op_resolve_modules and op_fetch_source_files from cli/ops/compiler.rs
* run TS worker on the same thread
This commit removes "check_stderr" setting from itest! macro used
to generate integration tests. Without this setting on tests discarded
output of stderr making it very hard to debug the problem in test.
Numerous tests were changed by adding "--quiet" flag to not display
"Compile"/"Download" prompts.
This PR hot-fixes permission escapes in dynamic imports, workers
and runtime compiler APIs.
"permissions" parameter was added to public APIs of SourceFileFetcher
and appropriate permission checks are performed during loading of
local and remote files.
Importing .wasm files is non-standardized therefore deciding to
support current functionality past 1.0 release is risky.
Besides that .wasm import posed many challenges in our codebase
due to complex interactions with TS compiler which spawned
thread for each encountered .wasm import.
This commit removes:
- cli/compilers/wasm.rs
- cli/compilers/wasm_wrap.js
- two integration tests related to .wasm imports
The issue is solved by proxying websocket messages over a pair of
`futures::mpsc::unbounded` channels. As these are are implemented in
the 'futures' crate, they can't participate in Tokio's cooperative
task yielding.
This PR removes the hack in CLI that allows to run scripts with shorthand: deno script.ts.
Removing this functionality because it hacks around short-comings of clap our CLI parser. We agree that this shorthand syntax is desirable, but it needs to be rethinked and reimplemented. For 1.0 we should go with conservative approach that is correct.
Fixes #4000 and fixes #4476. Now always tries to fetch reference types
for JS files. Does not throw if it fails, since Typescript compiler will
complain if the file is not there(it will try to fetch it again first)
and people who just use JS should not be bothered by this error.
Not sure about my test, it passes and catches the bug but maybe there is
a better way to express it.
This is a first pass implementation which is still missing several important
features:
- support for --inspect-brk (#4503)
- support for source maps (#4501)
- support for piping console.log to devtools console (#4502)
Co-authored-by: Bert Belder <bertbelder@gmail.com>
Co-authored-by: Matt Harrison <mt.harrison86@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
* Remove DENO_BUILD_MODE and DENO_BUILD_PATH
Also remove outdated docs related to ninja/gn.
* fix
* remove parameter to build_mode()
* remove arg parsing from benchmark.py
After splitting "failFast" and "exitOnFail" arguments, there was a situation where failing tests did not exit with code 1.
* fixed argument value passed to Deno.runTests() in deno test
* fixed argument value passed to Deno.runTests() in std/testing/runner.ts
* added integration tests for deno test to ensure failFast and exitOnFail work as expected
* don't write test file to file system, but keep it in memory
Fixes #4101
Previously, we would just provide the raw JSON to the TypeScript
compiler worker, but TypeScript does not transform JSON. This caused
a problem when emitting a bundle, that the JSON would just be "inlined"
into the output, instead of being transformed into a module.
This fixes this problem by providing the compiled JSON to the TypeScript
compiler, so TypeScript just sees JSON as a "normal" TypeScript module.
* drop server guard before unit test result check
To prevent cascading test failures when js_unit_test http server
guard is dropped before asserting that tests were successful.
This is really a band-aid and doesn't solve underlying issue with
http server.
* Update CLI for unit_test_runner.ts
* Change cli/js/tests/unit_test_runner.ts command line interface to work in 3
modes:
- "one-off" - run tests that match permissions of currently running
process
- "master" - run tests for all possible permission combinations, by
spawning subprocesses running in "worker" mode and communicating via
TCP socket; requires elevated permissions
- "worker" - run tests for set of permissions provided by CLI arg;
requires elevated permissions to setup TCP connection to "master";
after initial setup process drops permissions to given set
* Support filtering of tests by string passed after "--" CLI arg
* Update cli/js/tests/README.md
Rewrites "cli/js/unit_test_runner.ts" to communicate with spawned subprocesses
using TCP socket.
* Rewrite "Deno.runTests()" by factoring out testing logic to private "TestApi"
class. "TestApi" implements "AsyncIterator" that yields "TestEvent"s,
which is an interface for different types of event occuring during running
tests.
* Add "reporter" argument to "Deno.runTests()" to allow users to provide custom
reporting mechanism for tests. It's represented by "TestReporter" interface,
that implements hook functions for each type of "TestEvent". If "reporter"
is not provided then default console reporting is used (via
"ConsoleReporter").
* Change how "unit_test_runner" communicates with spawned suprocesses. Instead
of parsing text data from child's stdout, a TCP socket is created and used
for communication. "unit_test_runner" can run in either "master" or "worker"
mode. Former is responsible for test discovery and establishing needed
permission combinations; while latter (that is spawned by "master") executes
tests that match given permission set.
* Use "SocketReporter" that implements "TestReporter" interface to send output
of tests to "master" process. Data is sent as stringified JSON and then
parsed by "master" as structured data. "master" applies it's own reporting
logic to output tests to console (by reusing default "ConsoleReporter").
All Deno runtime test files were moved to cli/js/tests/ directory.
It makes a clear distinction that cli/js/tests/ contains code
that is run under Deno runtime as opposed to code in cli/js/ which
is used to create bundle and snapshot with "deno_typescript".
* add "assertOps" test assertion which makes sure test case
is not "leaking" ops - ie. after test finishes there are no
pending async ops
* apply "assertOps" to all tests in "cli/js/"
* fix numerous tests leaking ops
* document problem with edge case in "clearInterval"
and "clearTimeout" implementation where they
may leak async ops
* move "cli/js/worker_test.ts" to "cli/tests/worker_test.ts" and
run as integration test; workers leak ops because of missing
"terminate" implementation
Fixes #4602
We turned off `allowJs` by default, to keep the compiler from grabbing
a bunch of files that it wouldn't actually do anything useful with. On
the other hand, this caused problems with bundles, where the compiler
needs to gather all the dependencies, including JavaScript ones. This
fixes this so that when we are bundling, we analyse JavaScript imports
in the compiler.
This PR fixes an issue where we recursively analysed imports on plain JS files
in the compiler irrespective of "checkJs" being true. This caused problems
where when analysing the imports of those files, we would mistake some
import like structures (AMD/CommonJS) as dependencies and try to resolve
the "modules" even though the compiler would not actually look at those files.
Fixes #4031
When a bundle contains a single module, we were incorrectly determining
the module name, resulting in a non-functional bundle. This PR corrects
that determination.
Moves to using a minimal System loader for bundles generated by Deno.
TypeScript in 3.8 will be able to output TLA for modules, and the loader
is written to take advantage of that as soon as we update Deno to TS
3.8.
System also allows us to support `import.meta` and provide more ESM
aligned assignment of exports, as well as there is better handling of
circular imports.
The loader is also very terse versus to try to save overhead.
Also, fixed an issue where abstract classes were not being re-exported.
Fixes #2553
Fixes #3559
Fixes #3751
Fixes #3825
Refs #3301
* Use PathBuf for DenoSubcommand::Bundle's out_file
* Use PathBuf for DenoSubcommand::Format's files
* Use PathBuf for DenoSubcommand::Install's dir
* Use PathBuf for read/write whitelists
* establish basic event loop for workers
* make "self.close()" inside worker
* remove "runWorkerMessageLoop() - instead manually call global function
in Rust when message arrives. This is done in preparation for structured clone
* refactor "WorkerChannel" and use distinct structs for internal
and external channels; "WorkerChannelsInternal" and "WorkerHandle"
* move "State.worker_channels_internal" to "Worker.internal_channels"
* add "WorkerEvent" enum for child->host communication;
currently "Message(Buf)" and "Error(ErrBox)" variants are supported
* add tests for nested workers
* add tests for worker throwing error on startup
This change simplifies how we execute V8. Previously V8 Isolates jumped
around threads every time they were woken up. This was overly complex and
potentially hurting performance in a myriad ways. Now isolates run on
their own dedicated thread and never move.
- blocking_json spawns a thread and does not use a thread pool
- op_host_poll_worker and op_host_resume_worker are non-operational
- removes Worker::get_message and Worker::post_message
- ThreadSafeState::workers table contains WorkerChannel entries instead
of actual Worker instances.
- MainWorker and CompilerWorker are no longer Futures.
- The multi-threaded version of deno_core_http_bench was removed.
- AyncOps no longer need to be Send + Sync
This PR is very large and several tests were disabled to speed
integration:
- installer_test_local_module_run
- installer_test_remote_module_run
- _015_duplicate_parallel_import
- _026_workers
This flag was added to evaluate performance relative to tokio's threaded
runtime. Although it's faster in the HTTP benchmark, it's clear the runtime
is not the only perf problem.
Removing this flag will simplify further refactors, in particular
adopting the #[tokio::main] macro. This will be done in a follow up.
Ultimately we expect to move to the current thread runtime with Isolates
pinned to specific threads, but that will be a much larger refactor. The
--current-thread just complicates that effort.
* move is_dyn_import argument from Loader::resolve to Loader::load - it was always kind of strange that resolve() checks permissions.
* change argument type from &str to &ModuleSpecifier where applicable
* split ops/worker.rs into ops/worker_host.rs and ops/web_worker.rs
* refactor js/workers.ts and factor out js/worker_main.ts - entry point for WebWorker runtime
* BREAKING CHANGE: remove support for blob: URL in Worker
* BREAKING CHANGE: remove Deno namespace support and noDenoNamespace option in Worker constructor
* introduce WebWorker struct which is a stripped down version of cli::Worker
- Remove ability to specify run arguments like `--allow-net` after the
script argument. It's too hacky to make work with clap.
- Remove `--v8-options`, instead use `--v8-flags=--help`
- Give more descriptive names to unit tests in flags.rs
- Assume argv and subcommand into DenoFlags struct so the output of
flags module is only DenoFlags rather than the tuple (subcommand, flags,
argv).
- Improve CLI help text
- Make `deno run` specific args like `--allow-net` only show up in 'deno
help run' instead of as global flags in `deno help`.
- Removes `deno version` to simplify our implementation and be closer to
clap defaults. `deno -V` now only shows Deno's version and not V8's nor
TypeScript. `Deno.versions` can be used to see that information.
- Prevent clap from auto-detecting terminal width and attempting to wrap
text.
- Bundles are fully standalone. They now include the shared loader with
`deno_typescript`.
- Refactor of the loader in `deno_typescript` to perform module
instantiation in a more
- Change of behaviour when an output file is not specified on the CLI.
Previously a default name was determined and the bundle written to that
file, now the bundle will be sent to `stdout`.
- Refactors in the TypeScript compiler to be able to support the concept
of a request type. This provides a cleaner abstraction and makes it
easier to support things like single module transpiles to the userland.
- Remove a "dangerous" circular dependency between `os.ts` and `deno.ts`,
and define `pid` and `noColor` in a better way.
- Don't bind early to `console` in `repl.ts`.
- Add an integration test for generating a bundle.
This ensures the deno executable is properly created before running the integration tests.
Also allows deno_cli to be used as a lib. Docs are now properly generated: https://docs.rs/deno_cli/0.18.4/deno_cli/
Towards #2933
Prep for #2955
