In #9118, TLS streams were split into a "read half" and a "write half"
using tokio::io::split() to allow concurrent Conn#read() and
Conn#write() calls without one blocking the other. However, this
introduced a bug: outgoing data gets discarded when the TLS stream is
gracefully closed, because the read half is closed too early, before all
TLS control data has been received.
Fixes: #9692
Fixes: #10049
Fixes: #10296
Fixes: denoland/deno_std#750
This commit implements file watching for deno test.
When a file is changed, only the test modules which
use it as a dependency are rerun.
This is accomplished by reworking the file watching infrastructure
to pass the paths which have changed to the resolver, and then
constructing a module graph for each test module to check if it
contains any changed files.
Fixes a pesky bug in the fetch implementation where if the init part is
specified in `fetch` instead of the `Request` constructor, the
fillHeaders function receives two references to the same object, causing
it to append to the same list being iterated over.
This commit adds support for running test in parallel.
Entire test runner functionality has been rewritten
from JavaScript to Rust and a set of ops was added to support reporting in Rust.
A new "--jobs" flag was added to "deno test" that allows to configure
how many threads will be used. When given no value it defaults to 2.
Extensions allow declarative extensions to "JsRuntime" (ops, state, JS or middleware).
This allows for:
- `op_crates` to be plug-and-play & self-contained, reducing complexity leaked to consumers
- op middleware (like metrics_op) to be opt-in and for new middleware (unstable, tracing,...)
- `MainWorker` and `WebWorker` to be composable, allowing users to extend workers with their ops whilst benefiting from the other infrastructure (inspector, etc...)
In short extensions improve deno's modularity, reducing complexity and leaky abstractions for embedders and the internal codebase.
General cleanup of module loading code, tried to reduce indentation in various methods
on "JsRuntime" to improve readability.
Added "JsRuntime::handle_scope" helper function, which returns a "v8::HandleScope".
This was done to reduce a code pattern that happens all over the "deno_core".
Additionally if event loop hangs during loading of dynamic modules a list of
currently pending dynamic imports is printed.
`InvalidDNSNameError` is thrown when a string is not a valid hostname,
e.g. it contains invalid characters, or starts with a numeric digit. It
does not involve a (failed) DNS lookup.
denort is an optimization to "deno compile" to produce slightly smaller
output. It's a decent idea, but causes a lot of negative side-effects:
- Deno's link time is a source of constant agony both locally and in CI,
denort doubles link time.
- The release process is a long and arduous undertaking with many manual
steps. denort necessitates an additional manual zip + upload from M1
apple computers.
- The "deno compile" interface is complicated with the "--lite" option.
This is confusing for uses ("why wouldn't you want lite?").
The benefits of this feature do not outweigh the negatives. We must find
a different approach to optimizing "deno compile" output.
This commits adds adds "permissions" option to the test definitions
which allows tests to run with different permission sets than
the process's permission.
The change will only be in effect within the test function, once the
test has completed the original process permission set is restored.
Test permissions cannot exceed the process's permission.
You can only narrow or drop permissions, failure to acquire a
permission results in an error being thrown and the test case will fail.
This commit aligns the `fetch` API and the `Request` / `Response`
classes belonging to it to the spec. This commit enables all the
relevant `fetch` WPT tests. Spec compliance is now at around 90%.
Performance is essentially identical now (within 1% of 1.9.0).
This commit fixes the URL returned from `request.url` in the HTTP server
to be fully qualified. This previously existed, but was removed and
accidentially not readded during optimizations of the HTTP ops.
Returning a non fully qualified URL from `Request#url` is not spec
compliant.
The panic was caused by the lack of an error class mapping for
futures::channel::TrySendError, but it shouldn't have been throwing an error in
the first place - when a worker has terminated, postMessage should just return.
The issue was that the termination message hadn't yet been recieved, so it was
carrying on with trying to send the message. This adds another check on the Rust
side for if the channel is closed, and if it is the worker is treated as
terminated.
This commit aligns `Headers` to spec. It also removes the now unused
03_dom_iterable.js file. We now pass all relevant `Headers` WPT. We do
not implement any sort of header filtering, as we are a server side
runtime.
This is likely not the most efficient implementation of `Headers` yet.
It is however spec compliant. Once all the APIs in the `HTTP` hot loop
are correct we can start optimizing them. It is likely that this commit
reduces bench throughput temporarily.
This commit adds allowlist support to `--allow-run` flag.
Additionally `Deno.permissions.query()` allows to query for specific
programs within allowlist.
This commit adds blob URL support. Blob URLs are stored in a process
global storage, that can be accessed from all workers, and the module
loader. Blob URLs can be created using `URL.createObjectURL` and revoked
using `URL.revokeObjectURL`.
This commit does not add support for `fetch`ing blob URLs. This will be
added in a follow up commit.
This commit marks the `Deno.Buffer` / `Deno.readAll` /
`Deno.readAllSync` / `Deno.writeAll` / `Deno.writeAllSync` utils as
deprecated, and schedules them for removal in Deno 2.0. These
utilities are implemented in pure JS, so should not be part of the
Deno namespace.
These utilities are now available in std/io/buffer and std/io/util:
https://github.com/denoland/deno_std/pull/808.
This additionallty removes all internal dependance on Deno.Buffer.
- Improves op performance.
- Handle op-metadata (errors, promise IDs) explicitly in the op-layer vs
per op-encoding (aka: out-of-payload).
- Remove shared queue & custom "asyncHandlers", all async values are
returned in batches via js_recv_cb.
- The op-layer should be thought of as simple function calls with little
indirection or translation besides the conceptually straightforward
serde_v8 bijections.
- Preserve concepts of json/bin/min as semantic groups of their
inputs/outputs instead of their op-encoding strategy, preserving these
groups will also facilitate partial transitions over to v8 Fast API for the
"min" and "bin" groups
This commit moves implementation of bin ops to "deno_core" crates
as well as unifying logic between bin ops and json ops to reuse
as much code as possible (both in Rust and JavaScript).
Change `Console.#printFunc` to pass a log level as the second argument
(0 = debug, 3 = error), instead of a boolean for `isErr`. This does not
change the Deno runtime behaviour at all.
This commit rewrites "dispatch_minimal" into "dispatch_buffer".
It's part of an effort to unify JS interface for ops for both json
and minimal (buffer) ops.
Before this commit "minimal ops" could be either sync or async
depending on the return type from the op, but this commit changes
it to have separate signatures for sync and async ops (just like
in case of json ops).
This commit rewrites implementation of "JsRuntime::mod_evaluate".
Event loop is no longer polled automatically and users must manually
drive event loop forward after calling "mod_evaluate".
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit changes formatting of JS errors; by not showing
source lines for internal code. Where possible, instead using
the top stack frame associated with user code i.e. the first
location that is colourful and not a "deno:" URL.
This commit adds support for type definitions in "deno doc";
with this change "deno doc" is able to leverage the same directives
as TS compiler.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit adds a new subcommand called "coverage"
which can generate code coverage reports to stdout in
multiple formats from code coverage profiles collected to disk.
Currently this supports outputting a pretty printed diff and
the lcov format for interoperability with third-party services and tools.
Code coverage is still collected via other subcommands
that run and collect code coverage such as
"deno test --coverage=<directory>" but that command no
longer prints a pretty printed report at the end of a test
run with coverage collection enabled.
The restrictions on which files that can be reported on has
also been relaxed and are fully controllable with the include
and exclude regular expression flags on the coverage subcommand.
Co-authored-by: Luca Casonato <lucacasonato@yahoo.com>
This commit removes redundant "--reload" args because "util::deno_cmd"
recreates "DENO_DIR".
This commit also fixes ta_reload in integration tests to actually test reload.
This adds an exit sanitizer to ensure that code being tested or
dependencies of that code can't accidentally call "Deno.exit"
leading to partial test runs and false results.
This commit rewrites "JsRuntime::poll" function to fix a corner case that
might caused "overflown_response" to be overwritten by other overflown response.
The logic has been changed to allow returning multiple overflown response
alongside responses from shared queue.
This PR deprecates the "--ts"/"-T" flag of "deno eval" (which will later be removed in 2.0)
and introduces "--ext" which is used by "deno fmt" for content type selection.
This is to ensure we have a single flag that can be used across subcommands
to select the language (JS/TS).
Currently if WebSocket is closed without code, it will error
while on Chrome it would close with code 1005 instead.
Co-authored-by: crowlKats <13135287+crowlKats@users.noreply.github.com>
This commit adds support for formatting JSON and JSONC
in "deno fmt".
New values "json" and "jsonc" are added to "--ext" flag for
standard input processing.
This commit adds support for loading import maps from URLs,
both remote and local.
This feature is supported in CLI flag as well as in runtime
compiler API.
This PR makes json_op_sync/async generic to all Deserialize/Serialize types
instead of the loosely-typed serde_json::Value. Since serde_json::Value
implements Deserialize/Serialize, very little existing code needs to be updated,
however as json_op_sync/async are now generic, type inference is broken in some
cases (see cli/build.rs:146). I've found this reduces a good bit of boilerplate,
as seen in the updated deno_core examples.
This change may also reduce serialization and deserialization overhead as serde
has a better idea of what types it is working with. I am currently working on
benchmarks to confirm this and I will update this PR with my findings.
When we migrated away from all the locks, there was a regression that
was not caught immediately. The tsc::get_asset() would attempt to modify
the snapshot, but the problem was that the snapshot was a .clone() of
the inner language server's assets, which meant that modifications to
that where lost. When we then attempted to do a hover on those assets,
the inner language servers assets didn't have the retrieved asset, and
therefore would throw an error.
This removes the std folder from the tree.
Various parts of the tests are pretty tightly dependent
on std (47 direct imports and 75 indirect imports, not
counting the cli tests that use them as fixtures) so I've
added std as a submodule for now.
This commit reorganises cli/tests/integration_tests.rs.
All integration tests had been moved into integration module,
which allows to run only integration tests by "cargo test integration".
Additionally some tests were further grouped under nested modules
like "inspector", "file_watcher" or "repl".
This commits makes use of source maps and the original source
when printing lacking line coverage in the pretty printer.
Only the executable lines are checked as before (as non-executable
lines will always be ignored anyways). The lines then mapped to the
appropriate source line when a source map is present.
