This replaces `--allow-net` for import permissions and makes the
security sandbox stricter by also checking permissions for statically
analyzable imports.
By default, this has a value of
`--allow-import=deno.land:443,jsr.io:443,esm.sh:443,raw.githubusercontent.com:443,gist.githubusercontent.com:443`,
but that can be overridden by providing a different set of hosts.
Additionally, when no value is provided, import permissions are inferred
from the CLI arguments so the following works because
`fresh.deno.dev:443` will be added to the list of allowed imports:
```ts
deno run -A -r https://fresh.deno.dev
```
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
Partially addresses https://github.com/denoland/deno/issues/25648.
This allows packages that use `crossws` to be installed with `deno
install`. `crossws` specifies an optional peer dependency on
`uWebSockets`, but `uWebSockets` is not on npm (it is used with `git:`
or `github:` specifiers). Previously we would error on this, now we
don't error on non-existent optional peer dependencies.
This commit improves the throughput when a Deno process is running as a proxy
server that deals with compressed data from the upstream server.
We have seen a performance degradation since v1.45.3 when we run a HTTP server
with Deno with a particular setting, where it fetches _compressed_ data from the
upstream server and forwards it to the end client. After some investigation, it
turned out that [tower_http::decompression] causes this issue, which was fixed
by the new version of this crate, v0.6.1.
[tower_http::decompression]: https://docs.rs/tower-http/0.6.0/tower_http/decompression/index.html
Fixes #25798
This is for security reasons for the time being for Deno 2. Details to
follow post Deno 2.0 release.
Remote import maps seem incredibly rare (only 2 usages on GitHub from
what I can tell), so we'll add this back with more permissions if
there's enough demand for it:
https://github.com/search?type=code&q=%2F%22importMap%22%3A+%22http%2F
In the meantime, use the `--import-map` flag and `"deno.importMap"`
config in the LSP for remote import maps.
This PR addresses issue #25534
**Code Changes**
- Updated malva version to the latest in cli/Cargo.toml.
- Updated LanguageOptions to match new Malva config.
- Added test case same as the issue to assure changes success.
The long form "files" config has been flattened into the parent.
Old:
```json
{
"test": {
"files": {
"include": ["**/*.ts"],
"exclude": ["ignore.ts"]
}
}
}
```
New:
```json
{
"test": {
"include": ["**/*.ts"],
"exclude": ["ignore.ts"]
}
}
```
This was deprecated some time ago, but we're removing it now in Deno
2.0.
Closes #25415
Closes https://github.com/denoland/deno/issues/25321
Ended up being a larger refactoring, since we're now juggling
(potentially) two config files in the same `add`, instead of choosing
one. I don't love the shape of the code, but I think it's good enough
Some smaller side improvements:
- `deno remove` supports `jsonc`
- `deno install --dev` will be a really simple change
- if `deno remove` removes the last import/dependency in the
`imports`/`dependencies`/`devDependencies` field, it removes the field
instead of leaving an empty object
The map field has been empty for years now and we don't want the emit
file to be exposed so it allows us to iterate on making the cache
faster. Additionally, it's racy/unreliable to rely on this information.
Instead, people should emit the TS files themselves using tools like
deno_emit, typescript, esbuild, etc.
Closes https://github.com/denoland/deno/issues/17703
Stores normalized version constraints in the lockfile, which will
improve reproducibility and will fix a bug with duplicate specifiers
ending up in the lockfile. Also, gets rid of some duplicate data in the
specifiers area of the lockfile.
This commit enables the `log` feature for the `tracing` crate.
This allows us to examine additional detailed logs emitted by third party crates
that use `tracing` crate for logging by setting `RUST_LOG` env var or passing
`-L` option in command line.
Closes #25045
- rewrite flag help
- use gray for indentation
- reorganize permission flags and split them up
- make help subcommand act like help flag
- `deno run` outputs list of tasks
- Fixes #25120
error handling for `deno run` in case of no config file being found
needs to be improved
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
- Update ffi turbocall to use revised fast call api
- Remove `v8_version` function calls
- `*mut OwnedIsolate` is no longer stored in OpCtx gotham store
Permission flags are unified in a clearer and concise output.
Unstable flags are hidden by default with exception of the `unstable`
flag itself. the remaining unstable flags can be seen with a
`--help=unstable`.
This also cleans up to show unstable flags only for subcommands that
actually need them.
Also sorts flags alphabetically, and gorups various flags together in a
set of categories.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
From upgrading `deno_lint`.
Previously if you had a node project that used a bunch of node globals
(`process.env`, etc), you would have to fix the errors by hand. This PR
includes a new lint that detects usages of node globals (`process`,
`setImmediate`, `Buffer`, etc.) and provides an autofix to import the
correct value. For instance:
```ts
// main.ts
const _foo = process.env.FOO;
```
`deno lint` gives you
```ts
error[no-node-globals]: NodeJS globals are not available in Deno
--> /home/foo.ts:1:14
|
1 | const _foo = process.env.FOO;
| ^^^^^^^
= hint: Add `import process from "node:process";`
docs: https://lint.deno.land/rules/no-node-globals
Found 1 problem (1 fixable via --fix)
Checked 1 file
```
And `deno lint --fix` adds the import for you:
```ts
// main.ts
import process from "node:process";
const _foo = process.env.FOO;
```
Linux/macos only currently.
Part of https://github.com/denoland/deno/issues/23524 (fixes it on
platforms other than windows).
Part of #16899 (fixes it on platforms other than windows).
After this PR, playwright is functional on mac/linux.
This commit adds capability to format HTML, Svelte, Vue, Astro and Angular
files.
"--unstable-html" is required to format HTML files, and "--unstable-component"
flag is needed to format other formats. These can also be specified in the config
file.
Close #25015
This commit adds the "--rc" flag to "deno upgrade" subcommand.
This flag allows to upgrade to the latest "release candidate" release.
The update checker was also updated to take this into account.
This PR integrates [Malva](https://github.com/g-plane/malva) into `deno
fmt`, which introduces the ability to format CSS, SCSS, Sass and Less
files.
On Linux x64 6.10, this PR increases about 800KiB:
```
❯ wc -c target/release/deno
125168728 target/release/deno
❯ wc -c target/release/deno
124349456 target/release/deno
```
This commit makes `fetch` error messages include source and destination TCP
socket info i.e. port number and IP address for better debuggability.
Closes #24922
This completely rewrites how we handle key material in ext/node. Changes
in this
PR:
- **Signing**
- RSA
- RSA-PSS 🆕
- DSA 🆕
- EC
- ED25519 🆕
- **Verifying**
- RSA
- RSA-PSS 🆕
- DSA 🆕
- EC 🆕
- ED25519 🆕
- **Private key import**
- Passphrase encrypted private keys 🆕
- RSA
- PEM
- DER (PKCS#1) 🆕
- DER (PKCS#8) 🆕
- RSA-PSS
- PEM
- DER (PKCS#1) 🆕
- DER (PKCS#8) 🆕
- DSA 🆕
- EC
- PEM
- DER (SEC1) 🆕
- DER (PKCS#8) 🆕
- X25519 🆕
- ED25519 🆕
- DH
- **Public key import**
- RSA
- PEM
- DER (PKCS#1) 🆕
- DER (PKCS#8) 🆕
- RSA-PSS 🆕
- DSA 🆕
- EC 🆕
- X25519 🆕
- ED25519 🆕
- DH 🆕
- **Private key export**
- RSA 🆕
- DSA 🆕
- EC 🆕
- X25519 🆕
- ED25519 🆕
- DH 🆕
- **Public key export**
- RSA
- DSA 🆕
- EC 🆕
- X25519 🆕
- ED25519 🆕
- DH 🆕
- **Key pair generation**
- Overhauled, but supported APIs unchanged
This PR adds a lot of new individual functionality. But most importantly
because
of the new key material representation, it is now trivial to add new
algorithms
(as shown by this PR).
Now, when adding a new algorithm, it is also widely supported - for
example
previously we supported ED25519 key pair generation, but we could not
import,
export, sign or verify with ED25519. We can now do all of those things.
Uses [sui](https://github.com/littledivy/sui) to inject metadata as a
custom section in the denort binary.
Metadata is stored as a Mach-O segment on macOS and PE `RT_RCDATA`
resource on Windows.
Fixes #11154
Fixes https://github.com/denoland/deno/issues/17753
```cpp
deno compile app.tsx
# on macOS
codesign --sign - ./app
# on Windows
signtool sign /fd SHA256 .\app.exe
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
- upgrade to v8 12.8
- optimizes DataView bigint methods
- fixes global interceptors
- includes CPED methods for ALS
- fix global resolution
- makes global resolution consistent using host_defined_options.
originally a separate patch but due to the global interceptor bug it
needs to be included in this pr for all tests to pass.
Fixes https://github.com/denoland/deno/issues/24756. Fixes
https://github.com/denoland/deno/issues/24796.
This also gets vitest working when using
[`--pool=forks`](https://vitest.dev/guide/improving-performance#pool)
(which is the default as of vitest 2.0). Ref
https://github.com/denoland/deno/issues/23882.
---
This PR resolves a handful of issues with child_process IPC. In
particular:
- We didn't support sending typed array views over IPC
- Opening an IPC channel resulted in the event loop never exiting
- Sending a `null` over IPC would terminate the channel
- There was some UB in the read implementation (transmuting an `&[u8]`
to `&mut [u8]`)
- The `send` method wasn't returning anything, so there was no way to
signal backpressure (this also resulted in the benchmark
`child_process_ipc.mjs` being misleading, as it tried to respect
backpressure. That gave node much worse results at larger message sizes,
and gave us much worse results at smaller message sizes).
- We weren't setting up the `channel` property on the `process` global
(or on the `ChildProcess` object), and also didn't have a way to
ref/unref the channel
- Calling `kill` multiple times (or disconnecting the channel, then
calling kill) would throw an error
- Node couldn't spawn a deno subprocess and communicate with it over IPC
This commit duplicates ops from "ext/fetch" to "ext/node" to
kick off a bigger rewrite of "node:http".
Most of duplication is temporary and will be removed as these
ops evolve.
Sending ALPN to a proxy, and then when tunneling, requires better
juggling of TLS configs. This improves the choice of TLS config in the
proxy connector, based on what reqwest does. It also includes some
`ext/fetch/tests.rs` that check the different combinations.
Fixes #24632
Fixes #24691
This is in preparation for extracting out node resolution code from
ext/node (which is something I'm going to do gradually over time).
Uses https://github.com/denoland/deno_package_json
This is the release commit being forwarded back to main for 1.45.3
---------
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This PR will bump the deno_cache_dir dependency from 0.10.0 to 0.10.2.
This will make the cache manifest at manifest.json more deterministic
(see denoland/deno_cache_dir#53 )
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Originally landed in
f6fd6619e7.
Reverted in https://github.com/denoland/deno/pull/24574.
This reland contains a fix that sends "Accept: */*" header for calls made
from "FileFetcher". Absence of this header made downloading source code
from JSR broken. This is tested by ensuring this header is present in the
test server that servers JSR packages.
---------
Co-authored-by: Sean McArthur <sean@seanmonstar.com>
This makes bare specifiers for npm packages work when inside a
workspace, which emulates the same behaviour as when there's a
node_modules directory. The bare specifier can be overwritten by
specifying an import map entry or package.json dependency entry.
* https://github.com/denoland/deno_config/pull/88
Closes #24605
This commit re-implements `ext/fetch` and all dependent crates
using `hyper` and `hyper-util`, instead of `reqwest`.
The reasoning is that we want to have greater control and access
to low level `hyper` APIs when implementing `fetch` API as well
as `node:http` module.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is a temporary fix, which is not perfect - specifying
`--import-map`
will break resolution of packages defined in `workspace` setting, but
erroring on `--import-map` currently causes regression in code that
worked fine in v1.44.x.
