This commit improves permission prompts by adding an option
to print a full trace of where the permissions is being requested.
Due to big performance hint of stack trace collection, this is only
enabled when `DENO_TRACE_PERMISSIONS` env var is present.
Closes https://github.com/denoland/deno/issues/20756
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit makes HTTP client parameters used in `fetch` API
configurable on the extension initialization via a callback
`client_builder_hook` that users can provide.
The main motivation behind this change is to allow `deno_fetch` users to
tune the HTTP/2 client to suit their needs, although Deno CLI users will
not benefit from it as no JavaScript interface is exposed to set these
parameters currently.
It is up to users whether to provide a hook function. If not provided,
the default configuration from hyper crate will be used.
Ref #26785
This commit makes `fetch` error messages include source and destination TCP
socket info i.e. port number and IP address for better debuggability.
Closes #24922
Sending ALPN to a proxy, and then when tunneling, requires better
juggling of TLS configs. This improves the choice of TLS config in the
proxy connector, based on what reqwest does. It also includes some
`ext/fetch/tests.rs` that check the different combinations.
Fixes #24632
Fixes #24691
Originally landed in
f6fd6619e7.
Reverted in https://github.com/denoland/deno/pull/24574.
This reland contains a fix that sends "Accept: */*" header for calls made
from "FileFetcher". Absence of this header made downloading source code
from JSR broken. This is tested by ensuring this header is present in the
test server that servers JSR packages.
---------
Co-authored-by: Sean McArthur <sean@seanmonstar.com>
This commit re-implements `ext/fetch` and all dependent crates
using `hyper` and `hyper-util`, instead of `reqwest`.
The reasoning is that we want to have greater control and access
to low level `hyper` APIs when implementing `fetch` API as well
as `node:http` module.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit updates Deno to use `reqwest` at 0.12.4
and `rustls` at 0.22. Other related crates were updated
as well to match versions accepted by `reqwest` and `rustls`.
Note: we are not using the latest available `rustls` yet,
but this upgrade was non-trivial already, so a bump to
0.23 for `rustls` will be done in a separate commit.
Closes #23370
---------
Signed-off-by: Ryan Dahl <ry@tinyclouds.org>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
Precursor to #23236
This implements the SNI features, but uses private symbols to avoid
exposing the functionality at this time. Note that to properly test this
feature, we need to add a way for `connectTls` to specify a hostname.
This is something that should be pushed into that API at a later time as
well.
```ts
Deno.test(
{ permissions: { net: true, read: true } },
async function listenResolver() {
let sniRequests = [];
const listener = Deno.listenTls({
hostname: "localhost",
port: 0,
[resolverSymbol]: (sni: string) => {
sniRequests.push(sni);
return {
cert,
key,
};
},
});
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-1",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-2",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
assertEquals(sniRequests, ["server-1", "server-2"]);
listener.close();
},
);
```
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Issue https://github.com/denoland/deno/issues/22222
This PR moves `runtime/permissions` code to a upstream crate called
`deno_permissions`. The `deno_permissions::PermissionsContainer` is put
into the OpState and can be used instead of the current trait-based
permissions system.
For this PR, I've migrated `deno_fetch` to the new crate but kept the
rest of the trait-based system as a wrapper of `deno_permissions` crate.
Doing the migration all at once is error prone and hard to review.
Comparing incremental compile times for `ext/fetch` on Mac M1:
| profile | `cargo build --bin deno` | `cargo plonk build --bin deno` |
| --------- | ------------- | ------------------- |
| `debug` | 20 s | 0.8s |
| `release` | 4 mins 12 s | 1.4s |
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Main change is that:
- "hyper" has been renamed to "hyper_v014" to signal that it's legacy
- "hyper1" has been renamed to "hyper" and should be the default
Node HTTP/2 was using the default h2 `Bytes` datatype when we can be
making using of `BufView` like we do in `Deno.serve`.
`fetch` and `Deno.serverHttp` can't make use of `BufView` because they
are using `reqwest` which is stuck on hyper 0.x at this time.
Switch `ext/fetch` over to `resourceForReadableStream` to simplify and
unify implementation with `ext/serve`. This allows us to work in Rust
with resources only.
Two additional changes made to `resourceForReadableStream` were
required:
- Add an optional length to `resourceForReadableStream` which translates
to `size_hint`
- Fix a bug where writing to a closed stream that was full would panic
Implements `WebSocket` over http/2. This requires a conformant http/2
server supporting the extended connect protocol.
Passes approximately 100 new WPT tests (mostly `?wpt_flags=h2` versions
of existing websockets APIs).
This is implemented as a fallback when http/1.1 fails, so a server that
supports both h1 and h2 WebSockets will still end up on the http/1.1
upgrade path.
The patch also cleas up the websockets handshake to split it up into
http, https+http1 and https+http2, making it a little less intertwined.
This uncovered a likely bug in the WPT test server:
https://github.com/web-platform-tests/wpt/issues/42896
This is a prerequisite for fast streams work -- this particular resource
used a custom `mpsc`-style stream, and this work will allow us to unify
it with the streams in `ext/http` in time.
Instead of using Option as an internal semaphore for "correctly
completed EOF", we allow code to propagate errors into the channel which
can be picked up by downstream sinks like Hyper. EOF is signalled using
a more standard sender drop.
`ZeroCopyBuf` was convenient to use, but sometimes it did hide details
that some copies were necessary in certain cases. Also it made it way to easy
for the caller to pass around and convert into different values. This commit
splits `ZeroCopyBuf` into `JsBuffer` (an array buffer coming from V8) and
`ToJsBuffer` (a Rust buffer that will be converted into a V8 array buffer).
As a result some magical conversions were removed (they were never used)
limiting the API surface and preparing for changes in #19534.
This commit reimplements most of "node:http" client APIs using
"ext/fetch".
There is some duplicated code and two removed Node compat tests that
will be fixed in follow up PRs.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This tweaks the signature of `request_builder_hook` in order to support
fallible hooks.
The rationale for this is mostly on two sides:
* it allows a hook to inspect and possibly drop an outgoing request
(e.g. for policying purposes), bubbling up a detailed error message to
the user.
* it wires into newer `reqwest` API which allows to split and then
reassemble a `RequestBuilder`, although only in a fallible way
(https://github.com/seanmonstar/reqwest/pull/1770)
This commit removes "deno_core::RuntimeOptions::extensions_with_js".
Now it's embedders' responsibility to properly register extensions
that will not contains JavaScript sources when running from an existing
snapshot.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
