The tests would deadlock if we tried to write the sync marker into a
pipe that was full because one test streamed just enough data to fill
the pipe, so when we went to actually write the sync marker we blocked
when nobody was reading.
We use a two-phase lock for sync markers now: one to indicate "ready to
sync" and the second to indicate that the sync bytes have been received.
This commit adds enum to "InstallFlags" and "UninstallFlags" that will
allow to support both local and global (un)installation.
Currently the local variant is not used.
Towards https://github.com/denoland/deno/issues/23062
Fixes #23163.
The client-facing warning doesn't provide any value and is super
annoying. We still emit a warning message on the server side for format
errors, which should fulfill the same (less intrusive) purpose.
When `DENO_FUTURE=1` env var is present, then BYONM
("bring your own node_modules") is enabled by default.
That means that is there's a `package.json` present, users
are expected to explicitly install dependencies from that file.
Towards https://github.com/denoland/deno/issues/23151
Was doing a bit of debugging on why some stuff is not working in a
personal project and ran a quick debug profile and saw it cloning the
pkg json a lot. We should put this in an Rc.
Unused locals and parameters don't make sense to surface in remote
modules. Additionally, fast check can cause these kind of diagnostics
when publishing, so they should be ignored.
Closes #22959
Was investigating a separate stack overflow (that I've now found in the
node resolution code) and came across this. We should avoid recursion
(this is very old code).
This PR introduces the ability to exclude certain paths from the file watcher
in Deno. This is particularly useful when running scripts in watch mode,
as it allows developers to prevent unnecessary restarts when changes are
made to files that do not affect the running script, or when executing
scripts that generate new files which results in an infinite restart
loop.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
In preparation for upcoming changes to `deno install` in Deno 2.
If `-g` or `--global` flag is not provided a warning will be emitted:
```
⚠️ `deno install` behavior will change in Deno 2. To preserve the current behavior use `-g` or `--global` flag.
```
The same will happen for `deno uninstall` - unless `-g`/`--global` flag
is provided
a warning will be emitted.
Towards https://github.com/denoland/deno/issues/23062
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
This commit changes "deno init" subcommand to use "jsr:" specifier for
standard library "assert" module. It is unversioned, but we will change
it to `@^1` once `@std/assert` release version 1.0.
This allows us to start decoupling `deno` and `deno_std` release. The
release scripts have been updated to take that into account.
Fixes #23053.
Two small bugs here:
- the existing condition for printing out the group header was broken.
it worked in the reproducer (in the issue above) without filtering only
by accident, due to setting `self.has_ungrouped = true` once we see the
warmup bench. Knowing that we sort benchmarks to put ungrouped benches
first, there are only two cases: 1) we are starting the first group 2)
we are ending the previous group and starting a new group
- when you passed `--filter` we were applying that filter to the warmup
bench (which is not visible to users), so we suffered from jit bias if
you were filtering (unless your filter was `<warmup>`)
TLDR;
Running
```bash
deno bench main.js --filter="G"
```
```js
// main.js
Deno.bench({
group: "G1",
name: "G1-A",
fn() {},
});
Deno.bench({
group: "G1",
name: "G1-B",
fn() {},
});
```
Before this PR:
```
benchmark time (avg) iter/s (min … max) p75 p99 p995
--------------------------------------------------------------- -----------------------------
G1-A 303.52 ps/iter3,294,726,102.1 (254.2 ps … 7.8 ns) 287.5 ps 391.7 ps 437.5 ps
G1-B 3.8 ns/iter 263,360,635.9 (2.24 ns … 8.36 ns) 3.84 ns 4.73 ns 4.94 ns
summary
G1-A
12.51x faster than G1-B
```
After this PR:
```
benchmark time (avg) iter/s (min … max) p75 p99 p995
--------------------------------------------------------------- -----------------------------
group G1
G1-A 3.85 ns/iter 259,822,096.0 (2.42 ns … 9.03 ns) 3.83 ns 4.62 ns 4.83 ns
G1-B 3.84 ns/iter 260,458,274.5 (3.55 ns … 7.05 ns) 3.83 ns 4.45 ns 4.7 ns
summary
G1-B
1x faster than G1-A
```
Before this PR, we didn't have any integration tests set up for the
`jupyter` subcommand.
This PR adds a basic jupyter client and helpers for writing integration
tests for the jupyter kernel. A lot of the code here is boilerplate,
mainly around the message format for jupyter.
This also adds a few basic integration tests, most notably for
requesting execution of a snippet of code and getting the correct
results.
This patch gets JUnit reporter to output more detailed information for
test steps (subtests).
## Issue with previous implementation
In the previous implementation, the test hierarchy was represented using
several XML tags like the following:
- `<testsuites>` corresponds to the entire test (one execution of `deno
test` has exactly one `<testsuites>` tag)
- `<testsuite>` corresponds to one file, such as `main_test.ts`
- `<testcase>` corresponds to one `Deno.test(...)`
- `<property>` corresponds to one `t.step(...)`
This structure describes the test layers but one problem is that
`<property>` tag is used for any use cases so some tools that can ingest
a JUnit XML file might not be able to interpret `<property>` as
subtests.
## How other tools address it
Some of the testing frameworks in the ecosystem address this issue by
fitting subtests into the `<testcase>` layer. For instance, take a look
at the following Go test file:
```go
package main_test
import "testing"
func TestMain(t *testing.T) {
t.Run("child 1", func(t *testing.T) {
// OK
})
t.Run("child 2", func(t *testing.T) {
// Error
t.Fatal("error")
})
}
```
Running [gotestsum], we can get the output like this:
```xml
<?xml version="1.0" encoding="UTF-8"?>
<testsuites tests="3" failures="2" errors="0" time="1.013694">
<testsuite tests="3" failures="2" time="0.510000" name="example/gosumtest" timestamp="2024-03-11T12:26:39+09:00">
<properties>
<property name="go.version" value="go1.22.1 darwin/arm64"></property>
</properties>
<testcase classname="example/gosumtest" name="TestMain/child_2" time="0.000000">
<failure message="Failed" type="">=== RUN TestMain/child_2
 main_test.go:12: error
--- FAIL: TestMain/child_2 (0.00s)
</failure>
</testcase>
<testcase classname="example/gosumtest" name="TestMain" time="0.000000">
<failure message="Failed" type="">=== RUN TestMain
--- FAIL: TestMain (0.00s)
</failure>
</testcase>
<testcase classname="example/gosumtest" name="TestMain/child_1" time="0.000000"></testcase>
</testsuite>
</testsuites>
```
This output shows that nested test cases are squashed into the
`<testcase>` layer by treating them as the same layer as their parent,
`TestMain`. We can still distinguish nested ones by their `name`
attributes that look like `TestMain/<subtest_name>`.
As described in #22795, [vitest] solves the issue in the same way as
[gotestsum].
One downside of this would be that one test failure that happens in a
nested test case will end up being counted multiple times, because not
only the subtest but also its wrapping container(s) are considered to be
failures. In fact, in the [gotestsum] output above, `TestMain/child_2`
failed (which is totally expected) while its parent, `TestMain`, was
also counted as failure. As
https://github.com/denoland/deno/pull/20273#discussion_r1307558757
pointed out, there is a test runner that offers flexibility to prevent
this, but I personally don't think the "duplicate failure count" issue
is a big deal.
## How to fix the issue in this patch
This patch fixes the issue with the same approach as [gotestsum] and
[vitest].
More specifically, nested test cases are put into the `<testcase>` level
and their names are now represented as squashed test names concatenated
by `>` (e.g. `parent 2 > child 1 > grandchild 1`). This change also
allows us to put a detailed error message as `<failure>` tag within the
`<testcase>` tag, which should be handled nicely by third-party tools
supporting JUnit XML.
## Extra fix
Also, file paths embedded into XML outputs are changed from absolute
path to relative path, which is helpful when running the test suites in
several different environments like CI.
Resolves #22795
[gotestsum]: https://github.com/gotestyourself/gotestsum
[vitest]: https://vitest.dev/
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This has been incorrect since the function adopted its (more intuitive)
current behavior in 9268df5f3. The same behavior change was backported
to v1.39.3 in 87e954f54.
Fixes #22941.
In that case, the only file with coverage was the `test.ts` file. The
coverage reporter filters out test files before compiling its report, so
after filtering we were left with an empty set of files. Later on it's
assumed that there is at least 1 file to be reported on, and we panic.
Instead of panicking, just issue an error after filtering.
In addition to the reasons for this outlined by @nayeemrmn in #14877
(which I think are reasons alone to not do this), this simplifies things
a lot because then we don't need to implement the following:
1. Need to handle a JSR module dynamically importing a module within it.
2. Need to handle importing an export of a JSR dep then another export
dynamically loaded later.
Additionally, people should be running `deno check dynamic_import.ts`
instead of relying on this behaviour.
Landing this as a fix because it's blocking people in some scenarios and
the current behaviour is broken (I didn't even have to change any tests
to remove this, which is bad).
Closes #22852
Closes #14877
Closes #22580
Skips the access check if the specific unary permission is in an
all-granted state. Generally prevents an allocation or two.
Hooks up a quiet "all" permission that is automatically inherited. This
permission will be used in the future to indicate that the user wishes
to accept all side-effects of the permissions they explicitly granted.
The "all" permission is an "ambient flag"-style permission that states
whether "allow-all" was passed on the command-line.
Issue https://github.com/denoland/deno/issues/22222
This PR moves `runtime/permissions` code to a upstream crate called
`deno_permissions`. The `deno_permissions::PermissionsContainer` is put
into the OpState and can be used instead of the current trait-based
permissions system.
For this PR, I've migrated `deno_fetch` to the new crate but kept the
rest of the trait-based system as a wrapper of `deno_permissions` crate.
Doing the migration all at once is error prone and hard to review.
Comparing incremental compile times for `ext/fetch` on Mac M1:
| profile | `cargo build --bin deno` | `cargo plonk build --bin deno` |
| --------- | ------------- | ------------------- |
| `debug` | 20 s | 0.8s |
| `release` | 4 mins 12 s | 1.4s |
This commit fixes race condition in "node:worker_threads" module were
the first message did a setup of "threadId", "workerData" and
"environmentData".
Now this data is passed explicitly during workers creation and is set up
before any user code is executed.
Closes https://github.com/denoland/deno/issues/22783
Closes https://github.com/denoland/deno/issues/22672
---------
Co-authored-by: Satya Rohith <me@satyarohith.com>
This is an unrealistic scenario, but it's still a good thing to fix and
have a test for because it probably fixes some other underlying issues
with how the gitignore was being resolved for the root directory.
From https://github.com/denoland/deno/pull/22720#issuecomment-1986134425
Previously the sloppy resolver could not resolve the following:
- foo/bar.ts
- foo.ts
- index.ts
Where `index.ts` contains `import "./foo"`, because it did not consider
`foo.ts` a valid target for this directory import.
This commit fixes this bug.
This is the release commit being forwarded back to main for 1.41.2
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This allows explicitly overriding a .gitignore by specifying files and
directories in "include". This does not apply to globs in an include as
files matching those will still be gitignored. Additionally,
individually gitignored files within an included directory will still be
ignored.
1. Stops `deno publish` using some custom include/exclude behaviour from
other sub commands
2. Takes ancestor directories into account when resolving gitignore
3. Backards compatible change that adds ability to unexclude an exclude
by using a negated glob at a more specific level for all sub commands
(see https://github.com/denoland/deno_config/pull/44).
We emitted `import "./` rather than `import "./$NAME"`. This is now
fixed.
Also makes a cosmetic change so that `../` imports are now just imported
as `../`, not `./../`.
An undocumented "DENO_DISABLE_PEDANTIC_NODE_WARNINGS" env
var can be used to silence warnings for sloppy imports and node builtins
without `node:` prefix.
This was showing up on the flamegraph.
```
14:54 $ hyperfine -S none --warmup 25 '/tmp/deno run /tmp/empty.js' 'target/release/deno run /tmp/empty.js'
Benchmark 1: /tmp/deno run /tmp/empty.js
Time (mean ± σ): 17.2 ms ± 4.7 ms [User: 11.2 ms, System: 4.0 ms]
Range (min … max): 15.1 ms … 72.9 ms 172 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: target/release/deno run /tmp/empty.js
Time (mean ± σ): 16.7 ms ± 1.1 ms [User: 11.1 ms, System: 4.0 ms]
Range (min … max): 15.0 ms … 20.1 ms 189 runs
Summary
'target/release/deno run /tmp/empty.js' ran
1.03 ± 0.29 times faster than '/tmp/deno run /tmp/empty.js'
✔ ~/Documents/github/deno/deno [faster_extract|…5⚑ 23]
```
The diagnostic was incorrect when importing a `.js` file with a
corresponding `.d.ts` file with sloppy imports because it would say to
change the `.js` extension to `.d.ts`, which is incorrect. We might as
well just hide this diagnostic.
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
Some `deno_std` tests were failing to print output that was resolved
after the last test finished. In addition, output printed before tests
began would sometimes appear above the "running X tests ..." line, and
sometimes below it depending on timing.
We now guarantee that all output is flushed before and after tests run,
making the output consistent.
Pre-test and post-test output are captured in `------ pre-test output
------` and `------ post-test output ------` blocks to differentiate
them from the regular output blocks.
Here's an example of a test (that is much noisier than normal, but an
example of what the output will look like):
```
Check ./load_unload.ts
------- pre-test output -------
load
----- output end -----
running 1 test from ./load_unload.ts
test ...
------- output -------
test
----- output end -----
test ... ok ([WILDCARD])
------- post-test output -------
unload
----- output end -----
```
A security feature of JSR is that it is self contained other than npm
dependencies. At publish time, the registry rejects packages that write
code like this:
```ts
const data = await import("https://example.com/evil.js");
```
However, this can be trivially bypassed by writing code that the
registry cannot statically analyze for. This PR prevents Deno from
loading dynamic imports that do this.
As we add tracing to more types of runtime activity, `--trace-ops` is
less useful of a name. `--trace-leaks` better reflects that this feature
traces both ops and timers, and will eventually trace resource opening
as well.
This keeps `--trace-ops` as an alias for `--trace-leaks`, but prints a
warning to the console suggesting migration to `--trace-leaks`.
One test continues to use `--trace-ops` to test the deprecation warning.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
- Removes the origin call, since all origins are the same for an isolate
(ie: the main module)
- Collects the `TestDescription`s and sends them all at the same time
inside of an Arc, allowing us to (later on) re-use these instead of
cloning.
Needs a follow-up pass to remove all the cloning, but that's a thread
that is pretty long to pull
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Supply chain security for JSR.
```
$ deno publish --provenance
Successfully published @divy/test_provenance@0.0.3
Provenance transparency log available at https://search.sigstore.dev/?logIndex=73657418
```
0. Package has been published.
1. Fetches the version manifest and verifies it's matching with uploaded
files and exports.
2. Builds the attestation SLSA payload using Github actions env.
3. Creates an ephemeral key pair for signing the github token
(aud=sigstore) and DSSE pre authentication tag.
4. Requests a X.509 signing certificate from Fulcio using the challenge
and ephemeral public key PEM.
5. Prepares a DSSE envelop for Rekor to witness. Posts an intoto entry
to Rekor and gets back the transparency log index.
6. Builds the provenance bundle and posts it to JSR.
Gets us closer to solving #20707.
Rewrites the `TestEventSender`:
- Allow for explicit creation of multiple streams. This will allow for
one-std{out,err}-per-worker
- All test events are received along with a worker ID, allowing for
eventual, proper parallel threading of test events.
In theory this should open up proper interleaving of test output,
however that is left for a future PR.
I had some plans for a better performing synchronization primitive, but
the inter-thread communication is tricky. This does, however, speed up
the processing of large numbers of tests 15-25% (possibly even more on
100,000+).
Before
```
ok | 1000 passed | 0 failed (32ms)
ok | 10000 passed | 0 failed (276ms)
```
After
```
ok | 1000 passed | 0 failed (25ms)
ok | 10000 passed | 0 failed (230ms)
```
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR enhances the `deno publish` command to infer dependencies from
`package.json` if present.
Updates dependent crates which includes an investigation fix by @irbull
in Deno's LSP when linting code. Huge thanks to Ian for tracking down
this issue.
Also includes Divy's deno_graph executor change, which reduces memory
usage when loading jsr specifiers and makes them faster.
Co-authored-by: irbull <irbull@users.noreply.github.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
When using a prefix or suffix containing an invalid filename character,
it's not entirely clear where the errors come from. We make these errors
more consistent across platforms.
In addition, all permission prompts for tempfile and tempdir were
printing the same API name.
We also take the opportunity to make the tempfile random space larger by
2x (using a base32-encoded u64 rather than a hex-encoded u32).
1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
Splitting the sleep and interval ops allows us to detect an interval
timer. We also remove the use of the `op_async_void_deferred` call.
A future PR will be able to split the op sanitizer messages for timers
and intervals.
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
This introduces the `denort` binary - a slim version of deno without
tooling. The binary is used as the default for `deno compile`.
Improves `deno compile` final size by ~2.5x (141 MB -> 61 MB) on Linux
x86_64.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
Removes the `FileFetcher`'s internal cache because I don't believe it's
necessary (we already cache this kind of stuff in places like deno_graph
or config files in different places). Removing it fixes this bug because
this functionality was already implemented in deno_graph and lowers
memory usage of the CLI a little bit.
This PR separates integration tests from CLI tests into a new project
named `cli_tests`. This is a prerequisite for an integration test runner
that can work with either the CLI binary in the current project, or one
that is built ahead of time.
## Background
Rust does not have the concept of artifact dependencies yet
(https://github.com/rust-lang/cargo/issues/9096). Because of this, the
only way we can ensure a binary is built before running associated tests
is by hanging tests off the crate with the binary itself.
Unfortunately this means that to run those tests, you _must_ build the
binary and in the case of the deno executable that might be a 10 minute
wait in release mode.
## Implementation
To allow for tests to run with and without the requirement that the
binary is up-to-date, we split the integration tests into a project of
their own. As these tests would not require the binary to build itself
before being run as-is, we add a stub integration `[[test]]` target in
the `cli` project that invokes these tests using `cargo test`.
The stub test runner we add has `harness = false` so that we can get
access to a `main` function. This `main` function's sole job is to
`execvp` the command `cargo test -p deno_cli`, effectively "calling"
another cargo target.
This ensures that the deno executable is always correctly rebuilt before
running the stub test runner from `cli`, and gets us closer to be able
to run the entire integration test suite on arbitrary deno executables
(and therefore split the build into multiple phases).
The new `cli_tests` project lives within `cli` to avoid a large PR. In
later PRs, the test data will be split from the `cli` project. As there
are a few thousand files, it'll be better to do this as a completely
separate PR to avoid noise.
- Move a workers test to js_unit_tests and make it work
- (slightly) repair the websocketstream_test and make it a JS unit test.
This test was being ignored and rotted quite a bit, but there's some
value in running as much of it as we can.
- Merge the two websocket test files
This removes the majority of `../../../../../../test_util` relative
imports from the codebase, allowing us to move this code more easily in
the future.
This commit removes some not really necessary FFI tests and in effect
removes them from being accessible from the user code.
This lowers the number of ops accessible to user code to 16.
Hacky quick fix. The real fix is a lot more work to do (move the
`SourceTextInfo` into all the diagnostics in order to make this less
error pone). I've already started on it, but it will require a lot of
downstream create changes.
Closes #22288
Auth tokens may be specified for one of the following:
- `abc123@deno.land`: `deno.land`, `www.deno.land`, etc
- `abc123@deno.land:8080`: `deno.land:8080`, `www.deno.land:8080`, etc
- `abc123@1.1.1.1`: IP `1.1.1.1` only
- `abc123@1.1.1.1:8080`: IP `1.1.1.1`, port 8080 only
- `abc123@[ipv6]`: IPv6 `[ipv6]` only
- `abc123@[ipv6]:8080`: IPv6 `[ipv6]`, port 8080 only
Leading dots are ignored, so `.deno.dev` is equivalent to `deno.dev`.
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
This commit adds a list of ops to `runtime/99_main.js` that are
currently relying on getting them from `Deno.core.ops`. All ops that are not
present in the list are removed from `Deno.core.ops` on startup (they are
imported from "virtual op module" - `ext:core/ops`) making them effectively
inaccessible to user code.
This change lowers the number of ops exposed to user code from 650 to
around 260. This number should be gradually decreased in follow-up PRs.
Step 1 of the Rustification of sanitizers, which unblocks the faster
timers.
This replaces the resource sanitizer with a Rust one, using the new APIs
in deno_core.
This commit adds automatic expansion of "imports" field in "deno.json"
file.
If "npm:" or "jsr:" imports are encountered we automatically try to add
a "directory" remapping.
Previously users had to specify entries for both `foo` and `foo/` to be
able to import like
`import { symbol1 } from "foo";` and `import { symbol2 } from
"foo/some_file.js"`:
```
{
"imports": {
"foo": "npm:@foo/bar",
"foo/": "npm:/@foo/bar/",
}
```
With this change users can only add entry for `foo`:
```
{
"imports": {
"foo": "npm:@foo/bar",
}
```
The entry for `foo/` will be provided automatically.
Similarly if user provides "directory" remapping explicitly, we will not
overwrite it.
For removal in Deno v2. There are two issues:
1. Any script being run causes the output of `warnOnDeprecatedApi()` to
be printed, even when none of the `rid` properties are called.
2. `.rid` of these classes is used in multiple tests. I'm not sure how
to account for that. I thought of having `STDIN_RID`, and friends,
constants, whose values can be shared between the tests and the classes
themselves. Should we go with that or do something else?
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
For removal in Deno v2. I've also updated the deprecation of
`Deno.FsWatcher.return()`, which, to be clear, I'm not in favour of
deprecating. I mention this in #15499. Either way, it's safe to merge
this PR, then decide against the deprecation.
- changed `Deno.UnsafeWindowSurface` typings from accepting
`Deno.UnsafePointerView` to `Deno.PointerValue`
- added width and height to `GPUCanvasConfiguration`
Removes weird "frame like" characters and simplifies the output:
```
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:2:8
hint: Use `stdStream.isTerminal()` instead.
warning: Use of deprecated "Deno.isatty()" API. This API will be removed in Deno 2.
Stack trace:
at file:///Users/ib/dev/deno/foo.js:7:8
hint: Use `stdStream.isTerminal()` instead.
```
https://github.com/denoland/deno/assets/13602871/7a6e24bf-44ec-4dbf-ac96-2af1db9f2ab9
This commit deprecates `window` global and adds deprecation
notice on each use of `window`.
We decided to proceed with removal of `window` global variable in Deno
2.0. There's a lot of code
in the wild that uses pattern like this:
```
if (typeof window !== "undefined) {
...
}
```
to check if the code is being run in browser. However, this check passes
fine in Deno and
most often libraries that do this check try to access some browser API
that is not available
in Deno, or use DOM APIs (which are also not available in Deno).
This situation has occurred multiple times already
and it's unfeasible to expect the whole ecosystem to migrate to new
check (and even if that
happened there's a ton of code that's already shipped and won't change).
The migration is straightfoward - replace all usages of `window` with
`globalThis` or `self`.
When Deno encounters use of `window` global it will now issue a warning,
steering users
towards required changes:
```
Warning
├ Use of deprecated "window" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use `globalThis` or `self` instead.
│
├ Suggestion: You can provide `window` in the current scope with: `const window = globalThis`.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:7:1
```
Ref https://github.com/denoland/deno/issues/13367.
This commit adds support for [TC39 Decorator
Proposal](https://github.com/tc39/proposal-decorators).
These decorators are only available in transpiled sources - ie.
non-JavaScript files (because of lack of support in V8).
This entails that "experimental TypeScript decorators" are not available
by default
and require to be configured, with a configuration like this:
```
{
"compilerOptions": {
"experimentalDecorators": true
}
}
```
Closes https://github.com/denoland/deno/issues/19160
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This change sets the removal version for the `deno bundle` sub-command
for Deno v2. The warnings appear when `deno bundle` is run and in the
`--help` menu.
This change:
1. Implements `Deno.FsFile.sync()` and `Deno.FsFile.syncSync()`.
2. Deprecates `Deno.fsync()` and `Deno.fsyncSync()` for removal in Deno
v2, in favour of the above corresponding methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change:
1. Implements `Deno.FsFile.dataSync()` and `Deno.FsFile.dataSyncSync()`.
2. Deprecates `Deno.fdatasync()` and `Deno.fdatasyncSync()` for removal
in Deno v2, in favour of the above corresponding methods.
3. Replaces use of `Deno.fdatasync()` and `Deno.fdatasyncSync()` with
the above instance methods.
Related #21995
Most uses of `Deno.resources()` within tests, as they previously checked
for leaked resources. This is not needed as the test runner does this
automatically. Other internal uses of this API have been replaced with
the internal `Deno[Deno.internal].core.resources()`.
This change:
1. Implements `Deno.stdin.isTerminal()`, `Deno.stdout.isTerminal()` and
`Deno.stderr.isTerminal()`.
2. Deprecates `Deno.isatty()` for removal in Deno v2, in favour of the
above instance methods.
3. Replaces use of `Deno.isatty()` with the above instance methods.
Related #21995
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit adds `import.meta.filename` and `import.meta.dirname` APIs.
These APIs return string representation of filename and containing
dirname.
They are only defined for local modules (modules that have `file:///`
scheme).
Example:
```ts
console.log(import.meta.filename, import.meta.dirname)
```
Unix:
```
$ deno run /dev/my_module.ts
/dev/my_module.ts /dev/
```
Windows:
```
$ deno run C:\dev\my_module.ts
C:\dev\my_module.ts C:\
```
This change sets the removal version of `Deno.customInspect` for Deno
v2.
Towards #22021
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
It appears the `--prompt` flag has done nothing for some time. Perhaps,
since #13650. Classifying this as a dead functionality removal for this
reason.
Did this while working on #22021.
This change:
1. Sets the removal version for `Deno.ListenTlsOptions.certFile`,
`Deno.ListenTlsOptions.keyFile` and `Deno.ConnectTlsOptions.certFile`
for Deno v2, in favour of the `cert`, `key` and `caCerts` options,
respectively.
2. Replaces use of the deprecated options with the new recommended
options.
Towards #22021
This initially uses the new diagnostic printer in `deno lint`,
`deno doc` and `deno publish`. In the limit we should also update
`deno check` to use this printer.
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This change removes the currently deprecated `Deno.cron()` overload with
`options` as a potential last argument.
This might be fine to do now, in a major release, as `Deno.cron()` is an
unstable API. I thought of doing this while working on #22021. If this
is not ready to remove, I can instead set the removal version of this
overload for Deno v2.
Note: this overload was deprecated in Deno v1.38.2 (#21225). So it's
been deprecated for over 2 months.
This change:
1. Sets the removal version for `Deno.RequestEvent`, `Deno.HttpConn` and
`Deno.serveHttp()` for Deno v2. I thought it might be worth calling
`warnOnDeprecatedApi()` within `Deno.Request` and `Deno.HttpConn`
methods, but I thought just having it called within `Deno.serveHttp()`
might be sufficient.
2. Removes some possibly unneeded related benchmarks.
Towards #22021
Closes https://github.com/denoland/deno/issues/21828.
This API is a huge footgun. And given that "Deno.serveHttp" is a
deprecated API that is discouraged to use (use "Deno.serve()"
instead); it makes no sense to keep this API around.
This is a step towards fully migrating to Hyper 1.
Fixes #21928.
We have a code path which empties the extension sources because they're
expected to be pre-executed in the snapshot. Instead of using
conditional compilation for that, we now just check if a snapshot was
provided.
Removes the `dont_use_runtime_snapshot` feature. We didn't allow not
providing a snapshot unless this feature was provided, now we always do.
Adds the `only_snapshotted_js_sources` feature for us to use in CLI.
This asserts that a snapshot is provided and gates the runtime
transpilation code so it isn't included in the executable.
This change takes advantage of explicit resources management for
`FsFile` instances and tweaks documentation to encourage the use of it.
---------
Signed-off-by: Asher Gomez <ashersaupingomez@gmail.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
We were missing the `constants` export in the promise `fs` API which is
available in node.
```ts
import { constants, promises } from "node:fs";
import { constants as fsPromiseConstants } from "node:fs/promises";
console.log(constants === promises.constants); // logs: true
console.log(constants === fsPromiseConstants); // logs: true
```
Fixes https://github.com/denoland/deno/issues/21994
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
Ultimately, it came down to using incorrect property names in the
`FakeSocket` constructor. The values are passed under `remoteAddress`,
not `hostname` and `remotePort` instead of `port`.
Fixes https://github.com/denoland/deno/issues/21980
This commit introduces deprecation warnings for "Deno.*" APIs.
This is gonna be quite noisy, but should tremendously help with user
code updates to ensure
smooth migration to Deno 2.0. The warning is printed at each unique call
site to help quickly
identify where code needs to be adjusted. There's some stack frame
filtering going on to
remove frames that are not useful to the user and would only cause
confusion.
The warning can be silenced using "--quiet" flag or
"DENO_NO_DEPRECATION_WARNINGS" env var.
"Deno.run()" API is now using this warning. Other deprecated APIs will
start warning
in follow up PRs.
Example:
```js
import { runEcho as runEcho2 } from "http://localhost:4545/run/warn_on_deprecated_api/mod.ts";
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
async function runEcho() {
const p = Deno.run({
cmd: [
Deno.execPath(),
"eval",
"console.log('hello world')",
],
});
await p.status();
p.close();
}
await runEcho();
await runEcho();
for (let i = 0; i < 10; i++) {
await runEcho();
}
await runEcho2();
```
```
$ deno run --allow-read foo.js
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
└─ at file:///Users/ib/dev/deno/foo.js:3:16
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:13:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:14:7
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
└ Stack trace:
├─ at runEcho (file:///Users/ib/dev/deno/foo.js:8:18)
└─ at file:///Users/ib/dev/deno/foo.js:17:9
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
hello world
Warning
├ Use of deprecated "Deno.run()" API.
│
├ This API will be removed in Deno 2.0. Make sure to upgrade to a stable API before then.
│
├ Suggestion: Use "Deno.Command()" API instead.
│
├ Suggestion: It appears this API is used by a remote dependency.
│ Try upgrading to the latest version of that dependency.
│
└ Stack trace:
├─ at runEcho (http://localhost:4545/run/warn_on_deprecated_api/mod.ts:2:18)
└─ at file:///Users/ib/dev/deno/foo.js:20:7
hello world
```
Closes #21839
Transpiler doing type checking such as the ones used in dnt or bundler
fail because of incompatible Worker types if env like browser are
targeted.
Signed-off-by: Jérôme Benoit <jerome.benoit@sap.com>
This commit removes the requirement for `--unstable` flag in `deno
jupyter` subcommand. The process will no longer exit if this flag is not
provided, however the subcommand itself is still considered unstable
and might change in the future.
Required for https://github.com/denoland/deno/pull/21452
This commit adds support for [Stage 3 Temporal API
proposal](https://tc39.es/proposal-temporal/docs/).
The API is available when `--unstable-temporal` flag is passed.
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
Co-authored-by: Kenta Moriuchi <moriken@kimamass.com>
This commit removes conditional type-checking of unstable APIs.
Before this commit `deno check` (or any other type-checking command and
the LSP) would error out if there was an unstable API in the code, but not
`--unstable` flag provided.
This situation hinders DX and makes it harder to configure Deno. Failing
during runtime unless `--unstable` flag is provided is enough in this case.
This was incorrectly being stored so the AOT cache for JSR specifiers
wasn't being used. I added a wrapper type to help prevent the API being
used incorrectly.
This commit adds support for "rejectionhandled" Web Event and
"rejectionHandled" Node event.
```js
import process from "node:process";
process.on("rejectionHandled", (promise) => {
console.log("rejectionHandled", reason, promise);
});
window.addEventListener("rejectionhandled", (event) => {
console.log("rejectionhandled", event.reason, event.promise);
});
```
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
<!--
Before submitting a PR, please read https://deno.com/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Ensures the Deno process is brought down even when the runtime gets hung
up on something.
Marvin found that the lsp was running without a parent vscode around so
this is maybe/probably related.
Fixes https://github.com/denoland/deno/issues/21840
The problem was hard to reproduce as its a race condition. I've added a
test that reproduces the problem 1/10 tries. We should move the
idleTimeout handling to Rust (maybe even built into fastwebsocket).
We were calling `expand_glob` on our excludes, which is very expensive
and unnecessary because we can pattern match while traversing instead.
1. Doesn't expand "exclude" globs. Instead pattern matches while walking
the directory.
2. Splits up the "include" into base paths and applicable file patterns.
This causes less pattern matching to occur because we're only pattern
matching on patterns that might match and not ones in completely
unrelated directories.
This defines the removal version of v2 for the following APIs that
favour the Streams API:
* `Deno.copy()`
* `Deno.File`
* `Deno.iter()`
* `Deno.Buffer`
* `Deno.readAll()`
* `Deno.readAllSync()`
* `Deno.writeAll()`
* `Deno.writeAllSync()`
* `Deno.FsWatcher.return()`
Part 1 of a potential 3 part series. Ref #13449
The current implementation passes key material back and forth RustCrypto
group of crates and ring. ring does not implement p521 yet.
This PR adds support for P521 named curve in `generateKey` and
`importKey` where we use RustCrypto. Other parts should be moved over to
the RustGroup group of crates for consistency.
This PR fixes #21658.
- `check` subcommand sees `exclude` option in `deno.json`. When some
paths passed with `check` command listed in `exclude`, they are ignored.
- When some files are listed in `exclude` and imported indirectly among
module graph, they are checked.
Harden the code that does permission checks to protect against
re-opening of stdin.
Code that runs FFI is vulnerable to an attack where fd 0 is closed
during a permission check and re-opened with a file that contains a
positive response (ie: `y` or `A`). While FFI code is dangerous in
general, we can make it more difficult for FFI-enabled code to bypass
additional permission checks.
- Checks to see if the underlying file for stdin has changed from the
start to the end of the permission check (detects races)
- Checks to see if the message is excessively long (lowering the window
for races)
- Checks to see if stdin and stderr are still terminals at the end of
the function (making races more difficult)
Fixes #20516
Follow up to #21747 and #21746
This tackles the last point of #20516 where certain inputs weren't
accepted in the other zlib methods
This adds the `toU8` conversion of `_brotli` to `_zlib.mjs`, when we
create the ZLibBuffer, we'll sanitize the input. I noticed that the
async had no handler for `string` input so I added that as well.
Fixes https://github.com/denoland/deno/issues/21734
Changes:
- Use default encode when options do not provide a encode callback.
- Remove internal TS for `node:querystring`. Its not helping catching
bugs like this because of invalid type assumptions and use of `any`,
more of a maintenance burden.
This fixes point 3 of https://github.com/denoland/deno/issues/20516
This PR creates consistency between the sync and async versions of the
brotli compress where we will always return a buffer like Node.
This fixes point 2 of #20516
This adds a conversion from Dataview/Buffer by returning `obj.buffer`
which can be converted to a `UInt8Array`.
Question: Regarding point 4 of the mentioned issue would it be
appropriate to copy the toU8 helper to the `zlib.mjs` methods?
These tests started failing on CI on Dec 28th, 2023 returning
ENOTFOUND. It's unclear what's going on, since `dig -x
8.8.8.8.in-addr.arpa`.
It needs a deeper investigation, but I want to unblock main branch
in the meantime.
Main change is that:
- "hyper" has been renamed to "hyper_v014" to signal that it's legacy
- "hyper1" has been renamed to "hyper" and should be the default
`opAsync` requires a lookup by name on each async call. This is a
mechanical translation of all opAsync calls to ensureFastOps.
The `opAsync` API on Deno.core will be removed at a later time.
When we migrate to op-import-per-extension, we will want to ensure that
ops have one and only one place where they are imported. This tackles
the ops that are imported via `ensureFastOps`, but does not yet tackle
direct `ops` imports.
Landing ahead of https://github.com/denoland/deno_core/pull/393
Node HTTP/2 was using the default h2 `Bytes` datatype when we can be
making using of `BufView` like we do in `Deno.serve`.
`fetch` and `Deno.serverHttp` can't make use of `BufView` because they
are using `reqwest` which is stuck on hyper 0.x at this time.
This commit adds a way to connect to the TS compiler host that is run
as part of the "deno lsp" subcommand. This can be done by specifying
"DENO_LSP_INSPECTOR" variable.
---------
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
This PR implements the child_process IPC pipe between parent and child.
The implementation uses Windows named pipes created by parent and passes
the inheritable file handle to the child.
I've also replace parts of the initial implementation which passed the
raw parent fd to JS with resource ids instead. This way no file handle
is exposed to the JS land (both parent and child).
`IpcJsonStreamResource` can stream upto 800MB/s of JSON data on Win 11
AMD Ryzen 7 16GB (without `memchr` vectorization)
`napi_open_handle_scope` was returning a bogus handle_scope and we were
trying to close it in `napi_close_handle_scope`.
This is a bit of a challenge to test, but the following testcase comes
from #21601 and appears to be fixed by this.
```
import { decode } from "https://deno.land/std@0.209.0/encoding/base64.ts";
import sharp from "npm:sharp";
const img = 'iVBORw0KGgoAAAANSUhEUgAAAQAAAAEAAQMAAABmvDolAAAAA1BMVEWq09/P7Lz1AAAAH0lEQVRoge3BAQ0AAADCoPdPbQ43oAAAAAAAAAAAvg0hAAABmmDh1QAAAABJRU5ErkJggg==';
Deno.test("async", async () => {
const id = setTimeout(() => Deno.exit(1), 1000);
await sharp(decode(img)).toBuffer();
await sharp(decode(img)).toBuffer();
clearTimeout(id);
});
```
Fixes https://github.com/denoland/deno/issues/21594
I verified locally that this fixes the problem. I'm working on testing
harness for Jupyter kernel to catch regressions like this and will
add it in a follow up PR.
Bumped versions for 1.39.0
Please ensure:
- [x] Target branch is correct (`vX.XX` if a patch release, `main` if
minor)
- [x] Crate versions are bumped correctly
- [x] deno_std version is incremented in the code (see
`cli/deno_std.rs`)
- [x] Releases.md is updated correctly (think relevancy and remove
reverts)
To make edits to this PR:
```shell
git fetch upstream release_1_39.0 && git checkout -b release_1_39.0 upstream/release_1_39.0
```
cc @mmastrac
---------
Co-authored-by: mmastrac <mmastrac@users.noreply.github.com>
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
This change deprecates `Deno.Reader`, `Deno.ReaderSync`, `Deno.Writer`,
`Deno.WriterSync` and `Deno.Closer` in favour of the [Web Streams
API](https://developer.mozilla.org/en-US/docs/Web/API/Streams_API).
After discussing with Yoshiya, we both thought now might be the right
time to deprecate these interfaces with v2 getting closer.
This PR implements the Node child_process IPC functionality in Deno on
Unix systems.
For `fd > 2` a duplex unix pipe is set up between the parent and child
processes. Currently implements data passing via the channel in the JSON
serialization format.
Part 2 of removing middleware.
This is somewhat awkward because `V8CrossThreadTaskSpawner` requires
tasks to be `Send`, but NAPI makes heavy use of `!Send` pointers. In
addition, Rust causes a closure to be `!Send` if you pull a `!Send`
value out of a struct.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Adds performance measurements for all ops used by the LSP. Also changes
output of "Language server status" page to include more precise
information.
Current suspicion is that computing "script version" takes a long time
for some users.
This problem occurred trying to load tensorflow.js
```
> import * as tf from 'npm:@tensorflow/tfjs';
Uncaught SyntaxError: Identifier 'mod' has already been declared at file:///Users/ry/Library/Caches/deno/npm/registry.npmjs.org/@tensorflow/tfjs/4.14.0/dist/tf.node.js:167:14
at async <anonymous>:1:33
```
This commit adds a no-op flushHeaders method to the ServerResponse
object. It is a nop because the ServerResponse implementation is based
on top of the Deno server API instead of the Node `OutgoingMessage`
base.
Fixes #21509
This fixes #21434 for `BroadcastChannel` and `WebSocketStream`.
`--unstable` still enable both, but granular unstable flags now also
work:
* `--unstable-net` now enables `WebSocketStream`.
* `--unstable-broadcast-channel` now enables `BroadcastChannel`.
* Additionally, there are now tests for all granular unstable flags.
Since `unsafe-proto` already had tests, so I didn't add any for this
one.
It also introduces a map to keep track of granular unstable ids without
having to sync multiple places.
This commit brings back usage of primordials in "40_testing.js" by
turning it back into an ES module and using new "lazy loading" functionality
of ES modules coming from "deno_core".
The same approach was applied to "40_jupyter.js".
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Adds an `--unstable-sloppy-imports` flag which supports the
following for `file:` specifiers:
* Allows writing `./mod` in a specifier to do extension probing.
- ex. `import { Example } from "./example"` instead of `import { Example
} from "./example.ts"`
* Allows writing `./routes` to do directory extension probing for files
like `./routes/index.ts`
* Allows writing `./mod.js` for *mod.ts* files.
This functionality is **NOT RECOMMENDED** for general use with Deno:
1. It's not as optimal for perf:
https://marvinh.dev/blog/speeding-up-javascript-ecosystem-part-2/
1. It makes tooling in the ecosystem more complex in order to have to
understand this.
1. The "Deno way" is to be explicit about what you're doing. It's better
in the long run.
1. It doesn't work if published to the Deno registry because doing stuff
like extension probing with remote specifiers would be incredibly slow.
This is instead only recommended to help with migrating existing
projects to Deno. For example, it's very useful for getting CJS projects
written with import/export declaration working in Deno without modifying
module specifiers and for supporting TS ESM projects written with
`./mod.js` specifiers.
This feature will output warnings to guide the user towards correcting
their specifiers. Additionally, quick fixes are provided in the LSP to
update these specifiers:
Landing changes required for
https://github.com/denoland/deno_core/pull/359
We needed to update 99_main.js and a whole load of tests.
API changes:
- setPromiseRejectCallback becomes setUnhandledPromiseRejectionHandler.
The function is now called from eventLoopTick.
- The promiseRejectMacrotaskCallback no longer exists, as this is
automatically handled in eventLoopTick.
- ops.op_dispatch_exception now takes a second parameter: in_promise.
The preferred way to call this op is now reportUnhandledException or
reportUnhandledPromiseRejection.
This commit stabilizes "Deno.HttpServer.shutdown" API as well as
Unix socket support in "Deno.serve" API.
---------
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
A bit hacky, but it works. Essentially, this will check for all the
scripts in the node_modules/.bin directory then force them to run with
Deno via deno_task_shell.
This commit adds a method of `Symbol.dispose` to the object returned
from `Deno.createHttpClient`, so we can make use of [explicit resource
management](https://github.com/tc39/proposal-explicit-resource-management)
by declaring it with `using`.
This commit adds support for a new `kv.watch()` method that allows
watching for changes to a key-value pair. This is useful for cases
where you want to be notified when a key-value pair changes, but
don't want to have to poll for changes.
---------
Co-authored-by: losfair <zhy20000919@hotmail.com>
Add support for signing with a RSA PEM private key: `pkcs8` and `pkcs1`.
Fixes https://github.com/denoland/deno/issues/18972
Ref #21124
Verified fix with `npm:sshpk`. Unverfied but fixes
`npm:google-auth-library`, `npm:web-push` & `oracle/oci-typescript-sdk`
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
This commit removes some of the technical debt related
to snapshotting JS code:
- "cli/ops/mod.rs" and "cli/build.rs" no longer define "cli" extension
which was not required anymore
- Cargo features for "deno_runtime" crate have been unified in
"cli/Cargo.toml"
- "cli/build.rs" uses "deno_runtime::snapshot::create_runtime_snapshot"
API
instead of copy-pasting the code
- "cli/js/99_main.js" was completely removed as it's not necessary
anymore
Towards https://github.com/denoland/deno/issues/21137
This PR causes Deno to include more files in the graph based on how a
template literal looks that's provided to a dynamic import:
```ts
const file = await import(`./dir/${expr}`);
```
In this case, it will search the `dir` directory and descendant
directories for any .js/jsx/etc modules and include them in the graph.
To opt out of this behaviour, move the template literal to a separate
line:
```ts
const specifier = `./dir/${expr}`
const file = await import(specifier);
```
Switch `ext/fetch` over to `resourceForReadableStream` to simplify and
unify implementation with `ext/serve`. This allows us to work in Rust
with resources only.
Two additional changes made to `resourceForReadableStream` were
required:
- Add an optional length to `resourceForReadableStream` which translates
to `size_hint`
- Fix a bug where writing to a closed stream that was full would panic
This commit changes LSP log names by prefixing them, we now have these
prefixes:
- `lsp.*` - requests coming from the client
- `tsc.request.*` - requests coming from clients that are routed to TSC
- `tsc.op.*` - ops called by the TS host
- `tsc.host.*` - requests that call JavaScript runtime that runs
TypeScript compiler host
Additionall `Performance::mark` was split into `Performance::mark` and
`Performance::mark_with_args` to reduce verbosity of code and logs.
This commit removes "ThrottledCancellationToken" in favor of
"CancellationToken".
Since calling into Rust to check if Tokio's cancellation token has
already been canceled is really cheap, there's no need for us to
throttle this check and let TSC burn up CPU with heavy computation.
When an old request is obsoleted while the user is typing, the client
will say so to the server and tower-lsp will drop the future associated
with that request.
This wires that up to the ts server by having any request's token be
cancelled when the surrounding state is dropped.
The self-upgrade feature is undesirable when deno is installed from
(Linux) distribution repository - using a system package manager. This
change will allow package maintainers to build deno with the "upgrade"
subcommand and background check disabled.
When the user runs `deno upgrade <args>` and the upgrade feature is
disabled, it will exit with error message explaining that this deno
binary was built without the upgrade feature.
Note: This patch is already used in the Alpine Linux’s
[deno](https://pkgs.alpinelinux.org/packages?name=deno) package.
What `Deno.ChildProcess` actually implements is `AsyncDisposable`, but the type
declaration says it's `Disposable`. This PR fixes the type declaration to match
the actual implementation.
Issue was main does canary builds, which broke this test because it
didn't handle searching for a canary release. Tested by building as
canary locally.
This PR updates the deprecation notices to point to the same replacement
APIs that the Standard Library points to. I've also tweaked the notices
to be a little more presentable/navigatable.
In particular, a follow-up PR in std will be made that documents the use
of `toArrayBuffer()`.
Closes #21193
Towards #20976
This commit adds unstable workspace support. This is extremely
bare-bones and
minimal first-pass at this.
With this change `deno.json` supports specifying `workspaces` key, that
accepts a list of subdirectories. Each workspace can have its own import
map. It's required to specify a `"name"` and `"version"` properties in the
configuration file for the workspace:
```jsonc
// deno.json
{
"workspaces": [
"a",
"b"
},
"imports": {
"express": "npm:express@5"
}
}
```
``` jsonc
// a/deno.json
{
"name": "a",
"version": "1.0.2",
"imports": {
"kleur": "npm:kleur"
}
}
```
```jsonc
// b/deno.json
{
"name": "b",
"version": "0.51.0",
"imports": {
"chalk": "npm:chalk"
}
}
```
`--unstable-workspaces` flag is required to use this feature:
```
$ deno run --unstable-workspaces mod.ts
```
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This PR changes the `Deno.cron` API:
* Marks the existing function as deprecated
* Introduces 2 new overloads, where the handler arg is always last:
```ts
Deno.cron(
name: string,
schedule: string,
handler: () => Promise<void> | void,
)
Deno.cron(
name: string,
schedule: string,
options?: { backoffSchedule?: number[]; signal?: AbortSignal },
handler: () => Promise<void> | void,
)
```
This PR also fixes a bug, when other crons continue execution after one
of the crons was closed using `signal`.
Fixes #21121 and #19498
Migrates fully to rustls_tokio_stream. We no longer need to maintain our
own TlsStream implementation to properly support duplex.
This should fix a number of errors with TLS and websockets, HTTP and
"other" places where it's failing.
This PR uses the new `cancel` method of `TransformStream` to properly
clean up the internal `TextDecoder` used in `TextDecoderStream` if the
stream is cancelled.
Fixes #13142
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
We only want one zlib dependency.
Zlib dependencies are reorganized so they use a hidden
`__vendored_zlib_ng` flag in cli that enables zlib-ng for both libz-sys
(used by ext/node) and flate2 (used by deno_web).
This also updates deno_graph, which has the JSR change to use "exports".
It's not yet useful atm, so I've made this PR a fix about the deno doc
--lint error message improvements. I'll do a follow-up PR that adds
exports to the deno.json
This is the release commit being forwarded back to main for 1.38.1
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
This PR reduces the time to run `queue persistence with inflight
messages` test from 60 seconds down to about 6 seconds.
The test simulates a crash to ensure that inflight messages are cleaned
up and re-queued when the new process starts. Since messages are
considered dead after 5 seconds of being queued, reopening the db within
5 seconds does not re-queue the messages on startup (they do get
re-queued after 60 seconds, which is the cleanup frequency). By waiting
for 5 seconds before reopening the db, the test ensures that the cleanup
happens quickly when the db is opened.
We can move all promise ID knowledge to deno_core, allowing us to better
experiment with promise implementation in deno_core.
`{un,}refOpPromise(promise)` is equivalent to
`{un,}refOp(promise[promiseIdSymbol])`
Remove tokio-rustls as a direct dependency of Deno and refactor
test_server to reduce code duplication.
All tcp and tls listener paths go through the same streams now, with the
exception of the simpler Hyper http-only handlers (those can be done in
a later follow-up).
Minor bugs fixed:
- gRPC server should only serve h2
- WebSocket over http/2 had a port overlap
- Restored missing eye-catchers for some servers (still missing on Hyper
ones)
This commit moves all Chrome Devtools Protocol messages to `cli/cdp.rs`
and refactors all places using these types to pull them from a common
place.
No functional changes.
