The diagnostic was incorrect when importing a `.js` file with a
corresponding `.d.ts` file with sloppy imports because it would say to
change the `.js` extension to `.d.ts`, which is incorrect. We might as
well just hide this diagnostic.
Improves #19100
Fixes #20356
Replaces #20428
Changes made in deno_core to support this:
- [x] Errors must be handled in setTimeout callbacks
- [x] Microtask ordering is not-quite-right
- [x] Timer cancellation must be checked right before dispatch
- [x] Timer sanitizer
- [x] Move high-res timer to deno_core
- [x] Timers need opcall tracing
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
Some `deno_std` tests were failing to print output that was resolved
after the last test finished. In addition, output printed before tests
began would sometimes appear above the "running X tests ..." line, and
sometimes below it depending on timing.
We now guarantee that all output is flushed before and after tests run,
making the output consistent.
Pre-test and post-test output are captured in `------ pre-test output
------` and `------ post-test output ------` blocks to differentiate
them from the regular output blocks.
Here's an example of a test (that is much noisier than normal, but an
example of what the output will look like):
```
Check ./load_unload.ts
------- pre-test output -------
load
----- output end -----
running 1 test from ./load_unload.ts
test ...
------- output -------
test
----- output end -----
test ... ok ([WILDCARD])
------- post-test output -------
unload
----- output end -----
```
A security feature of JSR is that it is self contained other than npm
dependencies. At publish time, the registry rejects packages that write
code like this:
```ts
const data = await import("https://example.com/evil.js");
```
However, this can be trivially bypassed by writing code that the
registry cannot statically analyze for. This PR prevents Deno from
loading dynamic imports that do this.
As we add tracing to more types of runtime activity, `--trace-ops` is
less useful of a name. `--trace-leaks` better reflects that this feature
traces both ops and timers, and will eventually trace resource opening
as well.
This keeps `--trace-ops` as an alias for `--trace-leaks`, but prints a
warning to the console suggesting migration to `--trace-leaks`.
One test continues to use `--trace-ops` to test the deprecation warning.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
- Removes the origin call, since all origins are the same for an isolate
(ie: the main module)
- Collects the `TestDescription`s and sends them all at the same time
inside of an Arc, allowing us to (later on) re-use these instead of
cloning.
Needs a follow-up pass to remove all the cloning, but that's a thread
that is pretty long to pull
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Supply chain security for JSR.
```
$ deno publish --provenance
Successfully published @divy/test_provenance@0.0.3
Provenance transparency log available at https://search.sigstore.dev/?logIndex=73657418
```
0. Package has been published.
1. Fetches the version manifest and verifies it's matching with uploaded
files and exports.
2. Builds the attestation SLSA payload using Github actions env.
3. Creates an ephemeral key pair for signing the github token
(aud=sigstore) and DSSE pre authentication tag.
4. Requests a X.509 signing certificate from Fulcio using the challenge
and ephemeral public key PEM.
5. Prepares a DSSE envelop for Rekor to witness. Posts an intoto entry
to Rekor and gets back the transparency log index.
6. Builds the provenance bundle and posts it to JSR.
Gets us closer to solving #20707.
Rewrites the `TestEventSender`:
- Allow for explicit creation of multiple streams. This will allow for
one-std{out,err}-per-worker
- All test events are received along with a worker ID, allowing for
eventual, proper parallel threading of test events.
In theory this should open up proper interleaving of test output,
however that is left for a future PR.
I had some plans for a better performing synchronization primitive, but
the inter-thread communication is tricky. This does, however, speed up
the processing of large numbers of tests 15-25% (possibly even more on
100,000+).
Before
```
ok | 1000 passed | 0 failed (32ms)
ok | 10000 passed | 0 failed (276ms)
```
After
```
ok | 1000 passed | 0 failed (25ms)
ok | 10000 passed | 0 failed (230ms)
```
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR enhances the `deno publish` command to infer dependencies from
`package.json` if present.
Updates dependent crates which includes an investigation fix by @irbull
in Deno's LSP when linting code. Huge thanks to Ian for tracking down
this issue.
Also includes Divy's deno_graph executor change, which reduces memory
usage when loading jsr specifiers and makes them faster.
Co-authored-by: irbull <irbull@users.noreply.github.com>
Co-authored-by: littledivy <littledivy@users.noreply.github.com>
When using a prefix or suffix containing an invalid filename character,
it's not entirely clear where the errors come from. We make these errors
more consistent across platforms.
In addition, all permission prompts for tempfile and tempdir were
printing the same API name.
We also take the opportunity to make the tempfile random space larger by
2x (using a base32-encoded u64 rather than a hex-encoded u32).
1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
This change deprecates
`Deno.CreateHttpClientOptions.{certChain,privateKey}` in favour of
`Deno.CreateHttpClientOptions.{cert,key}`.
Closes #22278
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
Splitting the sleep and interval ops allows us to detect an interval
timer. We also remove the use of the `op_async_void_deferred` call.
A future PR will be able to split the op sanitizer messages for timers
and intervals.
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
Note: tests are not the only part of the codebase that uses `std`. Other
parts, like `tools/`, do too. So, it could be argued that this is a
little misleading. Either way, I'm doing this as discussed with
@mmastrac.
This introduces the `denort` binary - a slim version of deno without
tooling. The binary is used as the default for `deno compile`.
Improves `deno compile` final size by ~2.5x (141 MB -> 61 MB) on Linux
x86_64.
This implementation heavily depends on there being a lockfile, meaning
JSR specifiers will always diagnose as uncached unless it's there. In
practice this affects cases where a `deno.json` isn't being used. Our
NPM specifier support isn't subject to this.
The reason for this is that the version constraint solving code is
currently buried in `deno_graph` and not usable from the LSP, so the
only way to reuse that logic is the solved-version map in the lockfile's
`packages.specifiers`.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
Removes the `FileFetcher`'s internal cache because I don't believe it's
necessary (we already cache this kind of stuff in places like deno_graph
or config files in different places). Removing it fixes this bug because
this functionality was already implemented in deno_graph and lowers
memory usage of the CLI a little bit.
This PR separates integration tests from CLI tests into a new project
named `cli_tests`. This is a prerequisite for an integration test runner
that can work with either the CLI binary in the current project, or one
that is built ahead of time.
## Background
Rust does not have the concept of artifact dependencies yet
(https://github.com/rust-lang/cargo/issues/9096). Because of this, the
only way we can ensure a binary is built before running associated tests
is by hanging tests off the crate with the binary itself.
Unfortunately this means that to run those tests, you _must_ build the
binary and in the case of the deno executable that might be a 10 minute
wait in release mode.
## Implementation
To allow for tests to run with and without the requirement that the
binary is up-to-date, we split the integration tests into a project of
their own. As these tests would not require the binary to build itself
before being run as-is, we add a stub integration `[[test]]` target in
the `cli` project that invokes these tests using `cargo test`.
The stub test runner we add has `harness = false` so that we can get
access to a `main` function. This `main` function's sole job is to
`execvp` the command `cargo test -p deno_cli`, effectively "calling"
another cargo target.
This ensures that the deno executable is always correctly rebuilt before
running the stub test runner from `cli`, and gets us closer to be able
to run the entire integration test suite on arbitrary deno executables
(and therefore split the build into multiple phases).
The new `cli_tests` project lives within `cli` to avoid a large PR. In
later PRs, the test data will be split from the `cli` project. As there
are a few thousand files, it'll be better to do this as a completely
separate PR to avoid noise.
- Move a workers test to js_unit_tests and make it work
- (slightly) repair the websocketstream_test and make it a JS unit test.
This test was being ignored and rotted quite a bit, but there's some
value in running as much of it as we can.
- Merge the two websocket test files
This removes the majority of `../../../../../../test_util` relative
imports from the codebase, allowing us to move this code more easily in
the future.
This commit removes some not really necessary FFI tests and in effect
removes them from being accessible from the user code.
This lowers the number of ops accessible to user code to 16.
Hacky quick fix. The real fix is a lot more work to do (move the
`SourceTextInfo` into all the diagnostics in order to make this less
error pone). I've already started on it, but it will require a lot of
downstream create changes.
Closes #22288
Auth tokens may be specified for one of the following:
- `abc123@deno.land`: `deno.land`, `www.deno.land`, etc
- `abc123@deno.land:8080`: `deno.land:8080`, `www.deno.land:8080`, etc
- `abc123@1.1.1.1`: IP `1.1.1.1` only
- `abc123@1.1.1.1:8080`: IP `1.1.1.1`, port 8080 only
- `abc123@[ipv6]`: IPv6 `[ipv6]` only
- `abc123@[ipv6]:8080`: IPv6 `[ipv6]`, port 8080 only
Leading dots are ignored, so `.deno.dev` is equivalent to `deno.dev`.
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
This commit adds `ppid` getter for `node:process` to improve Node
compatibility one step further.
There is one problem though, which is that `Deno.ppid`, which
`process.ppid` internally calls, is actually of type `bigint` although
it's supposed to be `number`. I filed an issue for this (#22166). For
the time being, explciit type conversion from `bigint` to `number` is
applied to match the Node.js behavior.
Fixes https://github.com/denoland/deno/issues/22180
Matches the Node.js implementation more closely. Removed types, they do
not help just make it harder to debug with stack traces.
This commit adds a list of ops to `runtime/99_main.js` that are
currently relying on getting them from `Deno.core.ops`. All ops that are not
present in the list are removed from `Deno.core.ops` on startup (they are
imported from "virtual op module" - `ext:core/ops`) making them effectively
inaccessible to user code.
This change lowers the number of ops exposed to user code from 650 to
around 260. This number should be gradually decreased in follow-up PRs.
