This was showing up on the flamegraph.
```
14:54 $ hyperfine -S none --warmup 25 '/tmp/deno run /tmp/empty.js' 'target/release/deno run /tmp/empty.js'
Benchmark 1: /tmp/deno run /tmp/empty.js
Time (mean ± σ): 17.2 ms ± 4.7 ms [User: 11.2 ms, System: 4.0 ms]
Range (min … max): 15.1 ms … 72.9 ms 172 runs
Warning: Statistical outliers were detected. Consider re-running this benchmark on a quiet system without any interferences from other programs. It might help to use the '--warmup' or '--prepare' options.
Benchmark 2: target/release/deno run /tmp/empty.js
Time (mean ± σ): 16.7 ms ± 1.1 ms [User: 11.1 ms, System: 4.0 ms]
Range (min … max): 15.0 ms … 20.1 ms 189 runs
Summary
'target/release/deno run /tmp/empty.js' ran
1.03 ± 0.29 times faster than '/tmp/deno run /tmp/empty.js'
✔ ~/Documents/github/deno/deno [faster_extract|…5⚑ 23]
```
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
This initially uses the new diagnostic printer in `deno lint`,
`deno doc` and `deno publish`. In the limit we should also update
`deno check` to use this printer.
This commit deprecates "--unstable" flag.
When "--unstable" flag is encountered a warning like this is printed:
```
The `--unstable` flag is deprecated, use granular `--unstable-*` flags instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When "--unstable" flag is used and an unstable API is called an
additional warning like this is printed for each API call:
```
The `Deno.dlopen` API was used with `--unstable` flag. The `--unstable` flag is deprecated, use granular `--unstable-ffi` instead.
Learn more at: https://docs.deno.com/runtime/manual/tools/unstable_flags
```
When no "--unstable-*" flag is provided and an unstable API is called
following
warning is issued before exiting:
```
Unstable API 'Deno.dlopen'. The `--unstable-ffi` flag must be provided.
```
---------
Signed-off-by: Divy Srivastava <dj.srivastava23@gmail.com>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This commit adds support for [Stage 3 Temporal API
proposal](https://tc39.es/proposal-temporal/docs/).
The API is available when `--unstable-temporal` flag is passed.
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@gmail.com>
Co-authored-by: Kenta Moriuchi <moriken@kimamass.com>
This commit removes conditional type-checking of unstable APIs.
Before this commit `deno check` (or any other type-checking command and
the LSP) would error out if there was an unstable API in the code, but not
`--unstable` flag provided.
This situation hinders DX and makes it harder to configure Deno. Failing
during runtime unless `--unstable` flag is provided is enough in this case.
The self-upgrade feature is undesirable when deno is installed from
(Linux) distribution repository - using a system package manager. This
change will allow package maintainers to build deno with the "upgrade"
subcommand and background check disabled.
When the user runs `deno upgrade <args>` and the upgrade feature is
disabled, it will exit with error message explaining that this deno
binary was built without the upgrade feature.
Note: This patch is already used in the Alpine Linux’s
[deno](https://pkgs.alpinelinux.org/packages?name=deno) package.
This commit moves all Chrome Devtools Protocol messages to `cli/cdp.rs`
and refactors all places using these types to pull them from a common
place.
No functional changes.
This commit adds granular `--unstable-*` flags:
- "--unstable-broadcast-channel"
- "--unstable-ffi"
- "--unstable-fs"
- "--unstable-http"
- "--unstable-kv"
- "--unstable-net"
- "--unstable-worker-options"
- "--unstable-cron"
These flags are meant to replace a "catch-all" flag - "--unstable", that
gives a binary control whether unstable features are enabled or not. The
downside of this flag that allowing eg. Deno KV API also enables the FFI
API (though the latter is still gated with a permission).
These flags can also be specified in `deno.json` file under `unstable`
key.
Currently, "--unstable" flag works the same way - I will open a follow
up PR that will print a warning when using "--unstable" and suggest to use
concrete "--unstable-*" flag instead. We plan to phase out "--unstable"
completely in Deno 2.
This commit adds "deno jupyter" subcommand which
provides a Deno kernel for Jupyter notebooks.
The implementation is mostly based on Deno's REPL and
reuses large parts of it (though there's some clean up that
needs to happen in follow up PRs). Not all functionality of
Jupyter kernel is implemented and some message type
are still not implemented (eg. "inspect_request") but
the kernel is fully working and provides all the capatibilities
that the Deno REPL has; including TypeScript transpilation
and npm packages support.
Closes https://github.com/denoland/deno/issues/13016
---------
Co-authored-by: Adam Powers <apowers@ato.ms>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This commit adds ability to print metrics of the Tokio
runtime to the console by passing "DENO_TOKIO_METRICS=1"
env var.
Metrics will be printed every second, but this can be changed
by "DENO_TOKIO_METRICS_INTERVAL=500" env var.
This reverts commit 798c1ad0f1.
Reverting because this change caused a spike in memory usage, but we
can't fully realise gains from lower GC pressure from more optimal
malloc/ free provided by "jemalloc".
We might revisit the topic in future.
Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
This removes `ProcState` and replaces it with a new `CliFactory` which
initializes our "service structs" on demand. This isn't a performance
improvement at the moment for `deno run`, but might unlock performance
improvements in the future.
1. Adds cli/standalone folder
2. Writes the bytes directly to the output file. When adding npm
packages this might get quite large, so let's not keep the final output
in memory just in case.
1. Breaks up functionality within `ProcState` into several other structs
to break out the responsibilities (`ProcState` is only a data struct
now).
2. Moves towards being able to inject dependencies more easily and have
functionality only require what it needs.
3. Exposes `Arc<T>` around the "service structs" instead of it being
embedded within them. The idea behind embedding them was to reduce the
verbosity of needing to pass around `Arc<...>`, but I don't think it was
exactly working and as we move more of these structs to be more
injectable I don't think the extra verbosity will be a big deal.
Removes the functions in the `emit` module and replaces them with an
`Emitter` struct that can have "ctor dependencies" injected rather than
using functions to pass along the dependencies.
This is part of a long term refactor to move more functionality out of
proc state.
- Generalizes the npm version code (ex. `NpmVersion` -> `Version`,
`NpmVersionReq` -> `VersionReq`). This is a slow refactor towards
extracting out this code for deno specifiers and better usage in
deno_graph.
- Removes `SpecifierVersionReq`. Consolidates `NpmVersionReq` and
`SpecifierVersionReq` to just `VersionReq`
- Removes `NpmVersionMatcher`. This now just looks at `VersionReq`.
- Paves the way to allow us to create `NpmPackageReference`'s from a
package.json's dependencies/dev dependencies
(`VersionReq::parse_from_npm`).
This commit changes "deno repl" command to run with no permissions by
default and accept "--allow-*" flags.
This change is dictated by the fact that currently there is no way to
run REPL with limited permissions. Technically it's a breaking
change in the CLI command, but there's agreement in the team
that it has merit and it's a good solution.
Running just "deno" command still starts the REPL with full permissions
allowed, but now a banner is printed to inform users about that:
This code checks if permission flags are incorrectly defined after the
module name (e.g. `deno run mod.ts --allow-read` instead of the correct
`deno run --allow-read mod.ts`). If so, a simple warning is displayed.
Supports npm specifiers for `deno install`. This will by default always
use a lockfile (which is generated on first run) unless `--no-lock` is
specified.
1. There was a lot of cloning going on with `NpmPackageInfo`. This is
now stored in an `Arc<NpmPackageInfo>` and cloning only happens on the
individual version.
2. The package cache is now cleared from memory after resolution.
3. This surfaced a bug in `deno cache` and I noticed it can be more
efficient if we have multiple root specifiers if we provide all the
specifiers as roots.
<!--
Before submitting a PR, please read http://deno.land/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
-->
This PR implements the NAPI for loading native modules into Deno.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: DjDeveloper <43033058+DjDeveloperr@users.noreply.github.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
This commit adds support for npm specifier in "deno cache" subcommand.
```
$ deno cache --unstable npm:vite npm:chalk https://deno.land/std/http/file_server.ts
```
Besides downloading requested npm package(s), it will also download
necessary code from "std/node/".
This commit removes "compat" mode. We shipped support for "npm:" specifier
support in v1.25 and that is preferred way to interact with Node code that we
will iterate and improve upon.
Previously `jsxImportSource` was resolved relative to the config file
during graph building, and relative to the emitted module during
runtime.
This is now fixed so that the JSX import source is resolved relative to
the module both during graph building and at runtime.
This adds an init subcommand to that creates a project starter similar to cargo init.
```
$ deno init my_project
Project initialized
Run these commands to get started:
cd my_project
deno run main.ts
deno run main_test.ts
$ deno run main.ts
Add 2 + 3 5
$ cat main.ts
export function add(a: number, b: number): number {
return a + b;
}
if (import.meta.main) {
console.log("Add 2 + 3", add(2, 3));
}
$ cat main_test.ts
import { assertEquals } from "https://deno.land/std@0.151.0/testing/asserts.ts";
import { add } from "./main.ts";
Deno.test(function addTest() {
assertEquals(add(2, 3), 5);
});
```
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
