Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.3
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.3 && git checkout -b forward_v1.33.3 upstream/forward_v1.33.3
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
**THIS PR HAS GIT CONFLICTS THAT MUST BE RESOLVED**
This is the release commit being forwarded back to main for 1.33.2
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.33.2 && git checkout -b forward_v1.33.2 upstream/forward_v1.33.2
```
Don't need this PR? Close it.
cc @levex
Co-authored-by: levex <levex@users.noreply.github.com>
Co-authored-by: Levente Kurusa <lkurusa@kernelstuff.org>
Migrates some of existing async ops to generated wrappers introduced in
https://github.com/denoland/deno/pull/18887. As a result "core.opAsync2"
was removed.
I will follow up with more PRs that migrate all the async ops to
generated wrappers.
- No need to wrap buffer in a `new DataView()`
- Deferred ops are still eagerly polled, but resolved on the next
tick of the event loop, we don't want them to be eagerly polled
- Using "core.opAsync"/"core.opAsync2" incurs additional cost
of looking up these functions on each call. Similarly with "ops.*"
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
This is a rewrite of the `Deno.serve` API to live on top of hyper
1.0-rc3. The code should be more maintainable long-term, and avoids some
of the slower mpsc patterns that made the older code less efficient than
it could have been.
Missing features:
- `upgradeHttp` and `upgradeHttpRaw` (`upgradeWebSocket` is available,
however).
- Automatic compression is unavailable on responses.
Fixes https://github.com/denoland/deno/issues/18700
Timeline of the events that lead to the bug.
1. WebSocket handshake complete
2. Server on `read_frame` holding an AsyncRefCell borrow of the
WebSocket stream.
3. Client sends a TXT frame after a some time
4. Server recieves the frame and goes back to `read_frame`.
5. After some time, Server starts a `write_frame` but `read_frame` is
still holding a borrow!
^--- Locked. read_frame needs to complete so we can resume the write.
This commit changes all writes to directly borrow the
`fastwebsocket::WebSocket` resource under the assumption that it won't
affect ongoing reads.
This should produce a little less garbage and using an object here
wasn't really required.
---------
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
This commit adds a new core API `opAsync2` to call an async op with
atmost 2 arguments. Spread argument iterators has a pretty big perf hit
when calling ops.
| name | avg msg/sec/core |
| --- | --- |
| 1.32.1 | `127820.750000` |
| #18506 | `140079.000000` |
| #18506 + #18509 | `150104.250000` |
| #18506 + #18509 + this | `157340.000000` |
Use u16 to represent the kind of event (0 - 6) & event code > 6 is
treated as the close code. This way we can represent all events + the
close code in a single JS number. This is safe because (as per RFC 6455)
close code from 0-999 are reserved & not used.
| name | avg msg/sec/core |
| --- | --- |
| deno_main | `127820.750000` |
| deno #18506 | `140079.000000` |
| deno #18506 + this | `150104.250000` |
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
Fixes https://github.com/denoland/deno/issues/17761
Tugstenite already sends a pong for a recieved ping. This automatically
happens when the socket read is being driven. From
https://github.com/snapview/tokio-tungstenite/issues/88
> You need to read from the read-side of the socket so that it
receives/handles pings, and on the next write it would then send the
corresponding pong.
Here's the source:
e1033afd95/src/protocol/mod.rs (L374-L380)
```rust
// Upon receipt of a Ping frame, an endpoint MUST send a Pong frame in
// response, unless it already received a Close frame. It SHOULD
// respond with Pong frame as soon as is practical. (RFC 6455)
if let Some(pong) = self.pong.take() {
trace!("Sending pong reply");
self.send_one_frame(stream, pong)?;
}
```
WIth this patch, all Autobahn tests from 1-8 pass. Fixed cases: 2.1,
2.2, 2.3, 2.4, 2.6, 2.9, 2.10, 2.11, 5.6, 5.7, 5.8, 5.19, 5.20
To run the test yourself, follow
https://www.notion.so/denolandinc/Autobahn-WebSocket-testsuite-723a86f450ce4823b4ef9cb3dc4c7869?pvs=4
This PR refactors all internal js files (except core) to be written as
ES modules.
`__bootstrap`has been mostly replaced with static imports in form in
`internal:[path to file from repo root]`.
To specify if files are ESM, an `esm` method has been added to
`Extension`, similar to the `js` method.
A new ModuleLoader called `InternalModuleLoader` has been added to
enable the loading of internal specifiers, which is used in all
situations except when a snapshot is only loaded, and not a new one is
created from it.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Updated third_party dlint to v0.37.0 for GitHub Actions. This PR
includes following changes:
* fix(prefer-primordials): Stop using array pattern assignments
* fix(prefer-primordials): Stop using global intrinsics except for
`SharedArrayBuffer`
* feat(guard-for-in): Apply new guard-for-in rule
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
<!--
Before submitting a PR, please read http://deno.land/manual/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
-->
Co-authored-by: denobot <33910674+denobot@users.noreply.github.com>
Co-authored-by: bartlomieju <bartlomieju@users.noreply.github.com>
This is the release commit being forwarded back to main for 1.26.1
Please ensure:
- [x] Everything looks ok in the PR
- [x] The release has been published
To make edits to this PR:
```shell
git fetch upstream forward_v1.26.1 && git checkout -b forward_v1.26.1 upstream/forward_v1.26.1
```
Don't need this PR? Close it.
cc @cjihrig
Co-authored-by: cjihrig <cjihrig@users.noreply.github.com>
Welcome to better optimised op calls! Currently opSync is called with parameters of every type and count. This most definitely makes the call megamorphic. Additionally, it seems that spread params leads to V8 not being able to optimise the calls quite as well (apparently Fast Calls cannot be used with spread params).
Monomorphising op calls should lead to some improved performance. Now that unwrapping of sync ops results is done on Rust side, this is pretty simple:
```
opSync("op_foo", param1, param2);
// -> turns to
ops.op_foo(param1, param2);
```
This means sync op calls are now just directly calling the native binding function. When V8 Fast API Calls are enabled, this will enable those to be called on the optimised path.
Monomorphising async ops likely requires using callbacks and is left as an exercise to the reader.
