Also don't panic on invalid domain names and addresses.
Extracted with cleanups up from #24080
Co-authored-by: Yazan AbdAl-Rahman <yazan.abdalrahman@exalt.ps>
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
Closes #18296.
Adds a `--frozen` (alias `--frozen-lockfile`) flag that errors out if
the lockfile is out of date. This is useful for running in CI (where an
out of date lockfile is usually a mistake) or to prevent accidental
changes in dependencies.
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
The PEM file specified by DENO_CERT can contain multiple certificates
13924fdb1b/cli/args/mod.rs (L722-L742)
Signed-off-by: Andreas Kohn <andreas.kohn@gmail.com>
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
This PR implements the changes we plan to make to `deno install` in deno
2.0.
- `deno install` without arguments caches dependencies from
`package.json` / `deno.json` and sets up the `node_modules` folder
- `deno install <pkg>` adds the package to the config file (either
`package.json` or `deno.json`), i.e. it aliases `deno add`
- `deno add` can also add deps to `package.json` (this is gated behind
`DENO_FUTURE` due to uncertainty around handling projects with both
`deno.json` and `package.json`)
- `deno install -g <bin>` installs a package as a globally available
binary (the same as `deno install <bin>` in 1.0)
---------
Co-authored-by: Nathan Whitaker <nathan@deno.com>
By default, `deno serve` will assign port 8000 (like `Deno.serve`).
Users may choose a different port using `--port`.
`deno serve /tmp/file.ts`
`server.ts`:
```ts
export default {
fetch(req) {
return new Response("hello world!\n");
},
};
```
This PR enables V8 code cache for ES modules and for `require` scripts
through `op_eval_context`. Code cache artifacts are transparently stored
and fetched using sqlite db and are passed to V8. `--no-code-cache` can
be used to disable.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit adds enum to "InstallFlags" and "UninstallFlags" that will
allow to support both local and global (un)installation.
Currently the local variant is not used.
Towards https://github.com/denoland/deno/issues/23062
This PR introduces the ability to exclude certain paths from the file watcher
in Deno. This is particularly useful when running scripts in watch mode,
as it allows developers to prevent unnecessary restarts when changes are
made to files that do not affect the running script, or when executing
scripts that generate new files which results in an infinite restart
loop.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
In preparation for upcoming changes to `deno install` in Deno 2.
If `-g` or `--global` flag is not provided a warning will be emitted:
```
⚠️ `deno install` behavior will change in Deno 2. To preserve the current behavior use `-g` or `--global` flag.
```
The same will happen for `deno uninstall` - unless `-g`/`--global` flag
is provided
a warning will be emitted.
Towards https://github.com/denoland/deno/issues/23062
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
As we add tracing to more types of runtime activity, `--trace-ops` is
less useful of a name. `--trace-leaks` better reflects that this feature
traces both ops and timers, and will eventually trace resource opening
as well.
This keeps `--trace-ops` as an alias for `--trace-leaks`, but prints a
warning to the console suggesting migration to `--trace-leaks`.
One test continues to use `--trace-ops` to test the deprecation warning.
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Supply chain security for JSR.
```
$ deno publish --provenance
Successfully published @divy/test_provenance@0.0.3
Provenance transparency log available at https://search.sigstore.dev/?logIndex=73657418
```
0. Package has been published.
1. Fetches the version manifest and verifies it's matching with uploaded
files and exports.
2. Builds the attestation SLSA payload using Github actions env.
3. Creates an ephemeral key pair for signing the github token
(aud=sigstore) and DSSE pre authentication tag.
4. Requests a X.509 signing certificate from Fulcio using the challenge
and ephemeral public key PEM.
5. Prepares a DSSE envelop for Rekor to witness. Posts an intoto entry
to Rekor and gets back the transparency log index.
6. Builds the provenance bundle and posts it to JSR.
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR enhances the `deno publish` command to infer dependencies from
`package.json` if present.
1. Renames zap/fast-check to instead be a `no-slow-types` lint rule.
1. This lint rule is automatically run when doing `deno lint` for
packages (deno.json files with a name, version, and exports field)
1. This lint rules still occurs on publish. It can be skipped by running
with `--no-slow-types`
This change sets the removal version for the `deno bundle` sub-command
for Deno v2. The warnings appear when `deno bundle` is run and in the
`--help` menu.
It appears the `--prompt` flag has done nothing for some time. Perhaps,
since #13650. Classifying this as a dead functionality removal for this
reason.
Did this while working on #22021.
We were calling `expand_glob` on our excludes, which is very expensive
and unnecessary because we can pattern match while traversing instead.
1. Doesn't expand "exclude" globs. Instead pattern matches while walking
the directory.
2. Splits up the "include" into base paths and applicable file patterns.
This causes less pattern matching to occur because we're only pattern
matching on patterns that might match and not ones in completely
unrelated directories.
Adds an `--unstable-sloppy-imports` flag which supports the
following for `file:` specifiers:
* Allows writing `./mod` in a specifier to do extension probing.
- ex. `import { Example } from "./example"` instead of `import { Example
} from "./example.ts"`
* Allows writing `./routes` to do directory extension probing for files
like `./routes/index.ts`
* Allows writing `./mod.js` for *mod.ts* files.
This functionality is **NOT RECOMMENDED** for general use with Deno:
1. It's not as optimal for perf:
https://marvinh.dev/blog/speeding-up-javascript-ecosystem-part-2/
1. It makes tooling in the ecosystem more complex in order to have to
understand this.
1. The "Deno way" is to be explicit about what you're doing. It's better
in the long run.
1. It doesn't work if published to the Deno registry because doing stuff
like extension probing with remote specifiers would be incredibly slow.
This is instead only recommended to help with migrating existing
projects to Deno. For example, it's very useful for getting CJS projects
written with import/export declaration working in Deno without modifying
module specifiers and for supporting TS ESM projects written with
`./mod.js` specifiers.
This feature will output warnings to guide the user towards correcting
their specifiers. Additionally, quick fixes are provided in the LSP to
update these specifiers:
A bit hacky, but it works. Essentially, this will check for all the
scripts in the node_modules/.bin directory then force them to run with
Deno via deno_task_shell.
The self-upgrade feature is undesirable when deno is installed from
(Linux) distribution repository - using a system package manager. This
change will allow package maintainers to build deno with the "upgrade"
subcommand and background check disabled.
When the user runs `deno upgrade <args>` and the upgrade feature is
disabled, it will exit with error message explaining that this deno
binary was built without the upgrade feature.
Note: This patch is already used in the Alpine Linux’s
[deno](https://pkgs.alpinelinux.org/packages?name=deno) package.
This commit adds unstable workspace support. This is extremely
bare-bones and
minimal first-pass at this.
With this change `deno.json` supports specifying `workspaces` key, that
accepts a list of subdirectories. Each workspace can have its own import
map. It's required to specify a `"name"` and `"version"` properties in the
configuration file for the workspace:
```jsonc
// deno.json
{
"workspaces": [
"a",
"b"
},
"imports": {
"express": "npm:express@5"
}
}
```
``` jsonc
// a/deno.json
{
"name": "a",
"version": "1.0.2",
"imports": {
"kleur": "npm:kleur"
}
}
```
```jsonc
// b/deno.json
{
"name": "b",
"version": "0.51.0",
"imports": {
"chalk": "npm:chalk"
}
}
```
`--unstable-workspaces` flag is required to use this feature:
```
$ deno run --unstable-workspaces mod.ts
```
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds granular `--unstable-*` flags:
- "--unstable-broadcast-channel"
- "--unstable-ffi"
- "--unstable-fs"
- "--unstable-http"
- "--unstable-kv"
- "--unstable-net"
- "--unstable-worker-options"
- "--unstable-cron"
These flags are meant to replace a "catch-all" flag - "--unstable", that
gives a binary control whether unstable features are enabled or not. The
downside of this flag that allowing eg. Deno KV API also enables the FFI
API (though the latter is still gated with a permission).
These flags can also be specified in `deno.json` file under `unstable`
key.
Currently, "--unstable" flag works the same way - I will open a follow
up PR that will print a warning when using "--unstable" and suggest to use
concrete "--unstable-*" flag instead. We plan to phase out "--unstable"
completely in Deno 2.
This change adds the `--env=[FILE]` flag to the `run`, `compile`,
`eval`, `install` and `repl` subcommands. Environment variables set in
the CLI overwrite those defined in the `.env` file.
Adds a new `--lint` flag to `deno doc` that surfaces three kinds of
diagnostics:
1. Diagnostic for non-exported type referenced in an exported type.
* Why? People often forget to export types from a module in TypeScript.
To supress this diagnostic, add an `@internal` jsdoc tag to the internal
type.
1. Diagnostic for missing return type or missing property type on a
**public** type.
* Why? Otherwise `deno doc` will not display good documentation. Adding
explicit types also helps with type checking performance.
1. Diagnostic for missing jsdoc on a **public** type.
* Why? Everything should be documented. This diagnostic can be supressed
by adding a jsdoc comment description.
If the lint passes, `deno doc` generates documentation as usual.
For example, checking for deno doc diagnostics on the CI:
```shellsession
$ deno doc --lint mod.ts second_entrypoint.ts > /dev/null
```
This feature is incredibly useful for library authors.
## Why not include this in `deno lint`?
1. The command needs the documenation output in order to figure out the
diagnostics.
1. `deno lint` doesn't understand where the entrypoints are. That's
critical for the diagnostics to be useful.
1. It's much more performant to do this while generating documentation.
1. There is precedence in rustdoc (ex. `#![warn(missing_docs)]`).
## Why not `--check`?
It is confusing with `deno run --check`, since that means to run type
checking (and confusing with `deno check --docs`).
## Output Future Improvement
The output is not ideal atm, but it's fine for a first pass. We will
improve it in the future.
Closes https://github.com/denoland/deno_lint/pull/972
Closes https://github.com/denoland/deno_lint/issues/970
Closes https://github.com/denoland/deno/issues/19356
This commit adds `--unstable-hmr` flag, that enabled Hot Module Replacement.
This flag works like `--watch` and accepts the same arguments. If
HMR is not possible the process will be restarted instead.
Currently HMR is only supported in `deno run` subcommand.
Upon HMR a `CustomEvent("hmr")` will be dispatched that contains
information which file was changed in its `details` property.
---------
Co-authored-by: Valentin Anger <syrupthinker@gryphno.de>
Co-authored-by: David Sherret <dsherret@gmail.com>
This commit adds support for multiple entry points to `deno doc`.
Unfortunately to achieve that, I had to change the semantics of the
command to explicitly require `--filter` parameter for filtering
symbols, instead of treating second free argument as the filter argument.
`deno doc --builtin` is still supported, but cannot be mixed with
actual entrypoints.
This PR adds a new unstable "bring your own node_modules" (BYONM)
functionality currently behind a `--unstable-byonm` flag (`"unstable":
["byonm"]` in a deno.json).
This enables users to run a separate install command (ex. `npm install`,
`pnpm install`) then run `deno run main.ts` and Deno will respect the
layout of the node_modules directory as setup by the separate install
command. It also works with npm/yarn/pnpm workspaces.
For this PR, the behaviour is opted into by specifying
`--unstable-byonm`/`"unstable": ["byonm"]`, but in the future we may
make this the default behaviour as outlined in
https://github.com/denoland/deno/issues/18967#issuecomment-1761248941
This is an extremely rough initial implementation. Errors are
terrible in this and the LSP requires frequent restarts. Improvements
will be done in follow up PRs.
This commit adds "deno jupyter" subcommand which
provides a Deno kernel for Jupyter notebooks.
The implementation is mostly based on Deno's REPL and
reuses large parts of it (though there's some clean up that
needs to happen in follow up PRs). Not all functionality of
Jupyter kernel is implemented and some message type
are still not implemented (eg. "inspect_request") but
the kernel is fully working and provides all the capatibilities
that the Deno REPL has; including TypeScript transpilation
and npm packages support.
Closes https://github.com/denoland/deno/issues/13016
---------
Co-authored-by: Adam Powers <apowers@ato.ms>
Co-authored-by: Kyle Kelley <rgbkrk@gmail.com>
This allows us to opt in to extremely detailed tracing from dependency
libraries, like so:
```
cargo run --features tracing/log,tracing/max_level_trace -- test --log-level=trace -A --unstable ./cli/tests/unit/serve_test.ts
```
It will not impact normal operation as it requires the
`tracing/max_level_trace` and `tracing/log` to be active.
Note that tracing is already a dependency -- this just makes it a direct
dep of cli so we can access its features more easily.
This PR adds a test reporter for the [Test Anything
Protocol](https://testanything.org).
It makes the following implementation decisions:
- No TODO pragma, as there is no such marker in `Deno.test`
- SKIP pragma for `ignore`d tests
- Test steps are treated as TAP14 subtests
- Support for this in consumers seems spotty
- Some consumers will incorrectly interpret these markers, resulting in
unexpected output
- Considering the lack of support, and to avoid implementation
complexity,
subtests are at most one level deep (all test steps are in the same
subtest)
- To accommodate consumers that use comments to indicate test-suites
(unspecced)
- The test module path is output as a comment
- This is disabled for `--parallel` testing
- Failure diagnostics are output as JSON, which is also valid YAML
- The structure is not specified, so the format roughly follows the spec
example:
```
---
message: "Failed with error 'hostname peebles.example.com not found'"
severity: fail
found:
hostname: 'peebles.example.com'
address: ~
wanted:
hostname: 'peebles.example.com'
address: '85.193.201.85'
at:
file: test/dns-resolve.c
line: 142
...
```
Fix #20022, fix #19627 (duplicate)
#17333 upgraded clap from version 3.1 to version 4. clap version 3.2.0
(intentionally) broke a behavior that deno was relying on to make `deno
run --v8-flags=--help` work without specifying a file, see
clap-rs/clap#3793. The workaround was to make the script argument
required _unless_ `--v8-flags` is present. This broke the expectation
that all successfully parsed `run` commands have the script argument
set, leading to the panic on
`matches.remove_many::<String>("script_arg").unwrap()`.
Clap, as far as I was able to find out, does not currently offer a neat
solution to this problem. This PR adds logic to create and return a
custom clap error when a parsed run command does not have the script
argument.
I added an appropriate test.
Renames the unstable `deno_modules` directory and corresponding settings
to `vendor` after feedback. Also causes the vendoring of the
`node_modules` directory which can be disabled via
`--node-modules-dir=false` or `"nodeModulesDir": false`.
This commit adds new "--deny-*" permission flags. These are complimentary to
"--allow-*" flags.
These flags can be used to restrict access to certain resources, even if they
were granted using "--allow-*" flags or the "--allow-all" ("-A") flag.
Eg. specifying "--allow-read --deny-read" will result in a permission error,
while "--allow-read --deny-read=/etc" will allow read access to all FS but the
"/etc" directory.
Runtime permissions APIs ("Deno.permissions") were adjusted as well, mainly
by adding, a new "PermissionStatus.partial" field. This field denotes that
while permission might be granted to requested resource, it's only partial (ie.
a "--deny-*" flag was specified that excludes some of the requested resources).
Eg. specifying "--allow-read=foo/ --deny-read=foo/bar" and then querying for
permissions like "Deno.permissions.query({ name: "read", path: "foo/" })"
will return "PermissionStatus { state: "granted", onchange: null, partial: true }",
denoting that some of the subpaths don't have read access.
Closes #18804.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
This commit adds a "dot" reporter to "deno test" subcommand,
that can be activated using "--dot" flag.
It provides a concise output using:
- "." for passing test
- "," for ignored test
- "!" for failing test
User output is silenced and not printed to the console.
In non-TTY environments each result is printed on a separate line.
This commit makes the following changes
- Created a `CompoundTestReporter` to allow us to use multiple reporters
- Implements `JUnitTestReporter` which writes JUnit XML to a path
- Added a CLI flag/option `--junit` that enables JUnit reporting. By
default this writes the report to `stdout` (and disables pretty
reporting). If a path is provided, it will write the JUnit report to
that file while the pretty reporter writes to stdout like normal
Output of `deno -- test --allow-all --unstable
--location=http://js-unit-tests/foo/bar --junit
cli/tests/unit/testing_test.ts `
```xml
<?xml version="1.0" encoding="UTF-8"?>
<testsuites name="deno test" tests="7" failures="0" errors="0" time="0.176">
<testsuite name="file:///Users/cooper/deno/deno/cli/tests/unit/testing_test.ts" tests="7" disabled="0" errors="0" failures="0">
<testcase name="testWrongOverloads" time="0.012">
</testcase>
<testcase name="nameOfTestCaseCantBeEmpty" time="0.009">
</testcase>
<testcase name="invalidStepArguments" time="0.008">
</testcase>
<testcase name="nameOnTextContext" time="0.029">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="originOnTextContext" time="0.030">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="parentOnTextContext" time="0.030">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="explicit undefined for boolean options" time="0.009">
</testcase>
</testsuite>
</testsuites>
```
We never properly added support for this. This fixes vendoring when it
has npm or node specifiers. Vendoring occurs by adding a
`"nodeModulesDir": true` property to deno.json then it uses a local
node_modules directory. This can be opted out by setting
`"nodeModulesDir": false` or running with `--node-modules-dir=false`.
Closes #18090
Closes #17210
Closes #17619
Closes #16778
This is the initial support for npm and node specifiers in `deno
compile`. The npm packages are included in the binary and read from it via
a virtual file system. This also supports the `--node-modules-dir` flag,
dependencies specified in a package.json, and npm binary commands (ex.
`deno compile --unstable npm:cowsay`)
Closes #16632
Hey there! I took a crack at improving these embedded docs [as requested
here](https://github.com/denoland/deno/issues/18685). These should
accurately reflect the functionality of the permission-related flags for
`deno run`.
### Highlights
* Adds human-readable argument string in the format [prescribed in the
docs](https://docs.rs/clap/latest/clap/struct.Arg.html#method.value_name)
* Keeps text description terse, but includes a relevant copy/pasteable
docs link
* Includes example argument usage/formatting
The CLI docs suggested that all deno subcommands no longer type-check by
default. This is only the case for some subcommands, and this PR
clarifies the CLI docs in this regard.
1. Fixes a cosmetic issue in the repl where it would display lsp warning
messages.
2. Lazily loads dependencies from the package.json on use.
3. Supports using bare specifiers from package.json in the REPL.
Closes #17929
Closes #18494
This change will enable dynamic imports and web workers to use modules
not reachable from the main module, by passing a list of extra side
module roots as options to `deno compile`.
This can be done by specifying "--include" flag that accepts a file path or a
URL. This flag can be specified multiple times, to include several modules.
The modules specified with "--include" flag, will be added to the produced
"eszip".
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit changes current "deno_core::resolve_url_or_path" API to
"resolve_url_or_path_deprecated" and adds new "resolve_url_or_path"
API that requires to explicitly pass the directory from which paths
should be resolved to.
Some of the call sites were updated to use the new API, the reminder
of them will be updated in a follow up PR.
Towards landing https://github.com/denoland/deno/pull/15454
This is a super basic initial implementation. We don't create a
`node_modules/.bin` folder at the moment and add it to the PATH like we
should which is necessary to make command name resolution in the
subprocess work properly (ex. you run a script that launches another
script that then tries to launch an "npx command"... this won't work
atm).
Closes #17492
This commits adds auto-discovery of "package.json" file when running
"deno run" and "deno task" subcommands. In case of "deno run" the
"package.json" is being looked up starting from the directory of the
script that is being run, stopping early if "deno.json(c)" file is found
(ie. FS tree won't be traversed "up" from "deno.json").
When "package.json" is discovered the "--node-modules-dir" flag is
implied, leading to creation of local "node_modules/" directory - we
did that, because most tools relying on "package.json" will expect
"node_modules/" directory to be present (eg. Vite). Additionally
"dependencies" and "devDependencies" specified in the "package.json"
are downloaded on startup.
This is a stepping stone to supporting bare specifier imports, but
the actual integration will be done in a follow up commit.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
Allows to change behavior of `deno fmt` to use "ASI" setting for
semicolons instead of always prefering them, this is done
by "--options-semi=asi" flag or `"semi": "asi"` setting
in the config file.
The way the standalone mode handles the `--cert` flag is different to
all other modes. This is because `--cert` takes a path to the
certificate file, which is directly added to the root cert store; except
for compile mode, where its byte contents are stored in the standalone
metadata, and they are added to the root cert store after the
`ProcState` is created.
This change instead changes `Flags::ca_file` (an `Option<String>`) into
`Flags::ca_data`, which can represent a `String` file path or a
`Vec<u8>` with the certificate contents. That way, standalone mode can
create a `ProcState` whose root cert store alreay contains the
certificate.
This change also adds a tests for certificates in standalone mode, since
there weren't any before.
This refactor will help with implementing web workers in standalone mode
in the future.
This PR updates the name used in `clap::Arg::value_name` for the
`--inspect*` flags from `HOST:PORT` to `HOST_AND_PORT` because the
former causes an arguments error when using shell completions in the
`zsh` shell.
