This brings in [`runtimelib`](https://github.com/runtimed/runtimed) to
use:
## Fully typed structs for Jupyter Messages
```rust
let msg = connection.read().await?;
self
.send_iopub(
runtimelib::Status::busy().as_child_of(msg),
)
.await?;
```
## Jupyter paths
Jupyter paths are implemented in Rust, allowing the Deno kernel to be
installed completely via Deno without a requirement on Python or
Jupyter. Deno users will be able to install and use the kernel with just
VS Code or other editors that support Jupyter.
```rust
pub fn status() -> Result<(), AnyError> {
let user_data_dir = user_data_dir()?;
let kernel_spec_dir_path = user_data_dir.join("kernels").join("deno");
let kernel_spec_path = kernel_spec_dir_path.join("kernel.json");
if kernel_spec_path.exists() {
log::info!("✅ Deno kernel already installed");
Ok(())
} else {
log::warn!("ℹ️ Deno kernel is not yet installed, run `deno jupyter --install` to set it up");
Ok(())
}
}
```
Closes https://github.com/denoland/deno/issues/21619
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
Issue https://github.com/denoland/deno/issues/22222
This PR moves `runtime/permissions` code to a upstream crate called
`deno_permissions`. The `deno_permissions::PermissionsContainer` is put
into the OpState and can be used instead of the current trait-based
permissions system.
For this PR, I've migrated `deno_fetch` to the new crate but kept the
rest of the trait-based system as a wrapper of `deno_permissions` crate.
Doing the migration all at once is error prone and hard to review.
Comparing incremental compile times for `ext/fetch` on Mac M1:
| profile | `cargo build --bin deno` | `cargo plonk build --bin deno` |
| --------- | ------------- | ------------------- |
| `debug` | 20 s | 0.8s |
| `release` | 4 mins 12 s | 1.4s |
- Removes the origin call, since all origins are the same for an isolate
(ie: the main module)
- Collects the `TestDescription`s and sends them all at the same time
inside of an Arc, allowing us to (later on) re-use these instead of
cloning.
Needs a follow-up pass to remove all the cloning, but that's a thread
that is pretty long to pull
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
The format of the sanitizers will change a little bit:
- If multiple async ops leak and traces are on, we repeat the async op
header once per stack trace.
- All leaks are aggregated under a "Leaks detected:" banner as the new
timers are eventually going to be added, and these are neither ops nor
resources.
- `1 async op` is now `An async op`
- If ops and resources leak, we show both (rather than op leaks masking
resources)
Follow-on to https://github.com/denoland/deno/pull/22226
This moves the op sanitizer descriptions into Rust code and prepares for
eventual op import from `ext:core/ops`. We cannot import these ops from
`ext:core/ops` as the testing infrastructure ops are not always present.
Changes:
- Op descriptions live in `cli` code and are currently accessible via an
op for the older sanitizer code
- `phf` dep moved to workspace root so we can use it here
- `ops.op_XXX` changed to to `op_XXX` to prepare for op imports later
on.
Step 1 of the Rustification of sanitizers, which unblocks the faster
timers.
This replaces the resource sanitizer with a Rust one, using the new APIs
in deno_core.
Node HTTP/2 was using the default h2 `Bytes` datatype when we can be
making using of `BufView` like we do in `Deno.serve`.
`fetch` and `Deno.serverHttp` can't make use of `BufView` because they
are using `reqwest` which is stuck on hyper 0.x at this time.
This commit removes some of the technical debt related
to snapshotting JS code:
- "cli/ops/mod.rs" and "cli/build.rs" no longer define "cli" extension
which was not required anymore
- Cargo features for "deno_runtime" crate have been unified in
"cli/Cargo.toml"
- "cli/build.rs" uses "deno_runtime::snapshot::create_runtime_snapshot"
API
instead of copy-pasting the code
- "cli/js/99_main.js" was completely removed as it's not necessary
anymore
Towards https://github.com/denoland/deno/issues/21137
Adds `buffers` to the `Deno.jupyter.broadcast` API to send binary data
via comms. This affords the ability to send binary data via websockets
to the jupyter widget frontend.
This makes `CliNpmResolver` a trait. The terminology used is:
- **managed** - Deno manages the node_modules folder and does an
auto-install (ex. `ManagedCliNpmResolver`)
- **byonm** - "Bring your own node_modules" (ex. `ByonmCliNpmResolver`,
which is in this PR, but unimplemented at the moment)
Part of #18967
This helps reduce flakes where a test starts an HTTP server and makes a
request using fetch, then shuts down the server, then starting a new
test with a new server, but the connection pool still has a "not quite
closed yet" connection to the old server, and a new request to the new
server gets sent on the closed connection, which obviously errors out.
Closes #19399 (running without snapshots at all was suggested as an
alternative solution).
Adds a `__runtime_js_sources` pseudo-private feature to load extension
JS sources at runtime for faster development, instead of building and
loading snapshots or embedding sources in the binary. Will only work in
a development environment obviously.
Try running `cargo test --features __runtime_js_sources
integration::node_unit_tests::os_test`. Then break some behaviour in
`ext/node/polyfills/os.ts` e.g. make `function cpus() {}` return an
empty array, and run it again. Fix and then run again. No more build
time in between.
Closes https://github.com/denoland/deno/issues/15277
This commit adds a single "warmup" run of empty function when running
`deno bench`.
This change will break so-called "JIT bias" which makes V8 optimize the
first function
and then bail out of optimization on second function. In essence the
"warmup" function
is getting optimized and then all user benches are bailed out of
optimization.
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
This is just a straight refactor and I didn't do any cleanup in
ext/node. After this PR we can start to clean it up and make things
private that don't need to be public anymore.
Stores the test/bench functions in rust op state during registration.
The functions are wrapped in JS first so that they return a directly
convertible `TestResult`/`BenchResult`. Test steps are still mostly
handled in JS since they are pretty much invoked by the user. Allows
removing a bunch of infrastructure for communicating between JS and
rust. Allows using rust utilities for things like shuffling tests
(`Vec::shuffle`). We can progressively move op and resource sanitization
to rust as well.
Fixes #17122.
Fixes #17312.
This commit changes the build process in a way that preserves already
registered ops in the snapshot. This allows us to skip creating hundreds of
"v8::String" on each startup, but sadly there is still some op registration
going on startup (however we're registering 49 ops instead of >200 ops).
This situation could be further improved, by moving some of the ops
from "runtime/" to a separate extension crates.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
