This PR integrates [Malva](https://github.com/g-plane/malva) into `deno
fmt`, which introduces the ability to format CSS, SCSS, Sass and Less
files.
On Linux x64 6.10, this PR increases about 800KiB:
```
❯ wc -c target/release/deno
125168728 target/release/deno
❯ wc -c target/release/deno
124349456 target/release/deno
```
This commit adds "--serve" flag to "deno init" subcommand,
that provides a template for quick starting a project using
"deno serve".
---------
Co-authored-by: Asher Gomez <ashersaupingomez@gmail.com>
This commit adds short CLI flags for following permission flags:
- "-R" for "--allow-read"
- "-W" for "--allow-write"
- "-E" for "--allow-env"
- "-N" for "--allow-net"
- "-S" for "--allow-sys"
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This moves YAML formatting behind an unstable flag for Deno 1.46. This
will make it opt-in to start and then we can remove the flag to make it
on by default in version of Deno after that.
This can be specified by doing `deno fmt --unstable-yaml` or by
specifying the following in a deno.json file:
```json
{
"unstable": ["fmt-yaml"]
}
```
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
This commit deprecates `deno vendor` subcommand in favor
of using `--vendor` flag or `"vendor": true` setting in the config file.
The subcommand is still available (until Deno 2) but is hidden from
the help output.
Closes #20584
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The `jest` test runner popularized putting tests into a `__tests__`
folder. Whilst many have switched to going with a `.test` suffix in the
file name these days, there are still many jest projects that have
`__tests__`. By adding this to the default test detection logic it makes
`deno test` discover those out of the box.
Also don't panic on invalid domain names and addresses.
Extracted with cleanups up from #24080
Co-authored-by: Yazan AbdAl-Rahman <yazan.abdalrahman@exalt.ps>
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
Closes #18296.
Adds a `--frozen` (alias `--frozen-lockfile`) flag that errors out if
the lockfile is out of date. This is useful for running in CI (where an
out of date lockfile is usually a mistake) or to prevent accidental
changes in dependencies.
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
The PEM file specified by DENO_CERT can contain multiple certificates
13924fdb1b/cli/args/mod.rs (L722-L742)
Signed-off-by: Andreas Kohn <andreas.kohn@gmail.com>
1. Generally we should prefer to use the `log` crate.
2. I very often accidentally commit `eprintln`s.
When we should use `println` or `eprintln`, it's not too bad to be a bit
more verbose and ignore the lint rule.
This PR implements the changes we plan to make to `deno install` in deno
2.0.
- `deno install` without arguments caches dependencies from
`package.json` / `deno.json` and sets up the `node_modules` folder
- `deno install <pkg>` adds the package to the config file (either
`package.json` or `deno.json`), i.e. it aliases `deno add`
- `deno add` can also add deps to `package.json` (this is gated behind
`DENO_FUTURE` due to uncertainty around handling projects with both
`deno.json` and `package.json`)
- `deno install -g <bin>` installs a package as a globally available
binary (the same as `deno install <bin>` in 1.0)
---------
Co-authored-by: Nathan Whitaker <nathan@deno.com>
By default, `deno serve` will assign port 8000 (like `Deno.serve`).
Users may choose a different port using `--port`.
`deno serve /tmp/file.ts`
`server.ts`:
```ts
export default {
fetch(req) {
return new Response("hello world!\n");
},
};
```
This PR enables V8 code cache for ES modules and for `require` scripts
through `op_eval_context`. Code cache artifacts are transparently stored
and fetched using sqlite db and are passed to V8. `--no-code-cache` can
be used to disable.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit adds enum to "InstallFlags" and "UninstallFlags" that will
allow to support both local and global (un)installation.
Currently the local variant is not used.
Towards https://github.com/denoland/deno/issues/23062
This PR introduces the ability to exclude certain paths from the file watcher
in Deno. This is particularly useful when running scripts in watch mode,
as it allows developers to prevent unnecessary restarts when changes are
made to files that do not affect the running script, or when executing
scripts that generate new files which results in an infinite restart
loop.
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
In preparation for upcoming changes to `deno install` in Deno 2.
If `-g` or `--global` flag is not provided a warning will be emitted:
```
⚠️ `deno install` behavior will change in Deno 2. To preserve the current behavior use `-g` or `--global` flag.
```
The same will happen for `deno uninstall` - unless `-g`/`--global` flag
is provided
a warning will be emitted.
Towards https://github.com/denoland/deno/issues/23062
---------
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: David Sherret <dsherret@users.noreply.github.com>
This commit adds "deno add" subcommand that has a basic support for
adding "jsr:" packages to "deno.json" file.
This currently doesn't support "npm:" specifiers and specifying version
constraints.
