This patch adds a `remote` backend for `ext/kv`. This supports
connection to Deno Deploy and potentially other services compatible with
the KV Connect protocol.
Few improvements to FFI types:
1. Export `PointerObject` for convenience. It's fairly commonly used in
library code and thus should be exported.
2. Fix various comments around `PointerValue` and `UnsafePointer` and
expand upon them to better reflect reality.
3. Instead of using a `Record<"value", type>[T]` for determining the
type of an FFI symbol parameter use direct `T extends "value" ? type :
never` comparison.
The last part enables smuggling extra information into the parameter and
return value string declarations at the type level. eg. Instead of just
`"u8"` the parameter can be `"u8" & { [brand]: T }` for some `T extends
number`. That `T` can then be extracted from the parameter to form the
TypeScript function's parameter or return value type. Essentially, this
enables type-safe FFI!
The foremost use-cases for this are enums and pointer safety. These are
implemented in the second commit which should enable, in a backwards
compatible way, for pointer parameters to declare what sort of pointer
they mean, functions to declare what the API definition of the native
function is, and for numbers to declare what Enum they stand for (if
any).
Deno.serve's fast streaming implementation was not keeping the request
body resource ID alive. We were taking the `Rc<Resource>` from the
resource table during the response, so a hairpin duplex response that
fed back the request body would work.
However, if any JS code attempted to read from the request body (which
requires the resource ID to be valid), the response would fail with a
difficult-to-diagnose "EOF" error.
This was affecting more complex duplex uses of `Deno.fetch` (though as
far as I can tell was unreported).
Simple test:
```ts
const reader = request.body.getReader();
return new Response(
new ReadableStream({
async pull(controller) {
const { done, value } = await reader.read();
if (done) {
controller.close();
} else {
controller.enqueue(value);
}
},
}),
```
And then attempt to use the stream in duplex mode:
```ts
async function testDuplex(
reader: ReadableStreamDefaultReader<Uint8Array>,
writable: WritableStreamDefaultWriter<Uint8Array>,
) {
await writable.write(new Uint8Array([1]));
const chunk1 = await reader.read();
assert(!chunk1.done);
assertEquals(chunk1.value, new Uint8Array([1]));
await writable.write(new Uint8Array([2]));
const chunk2 = await reader.read();
assert(!chunk2.done);
assertEquals(chunk2.value, new Uint8Array([2]));
await writable.close();
const chunk3 = await reader.read();
assert(chunk3.done);
}
```
In older versions of Deno, this would just lock up. I believe after
23ff0e722e, it started throwing a more
explicit error:
```
httpServerStreamDuplexJavascript => ./cli/tests/unit/serve_test.ts:1339:6
error: TypeError: request or response body error: error reading a body from connection: Connection reset by peer (os error 54)
at async Object.pull (ext:deno_web/06_streams.js:810:27)
```
Some people might get think they need to import from this directory,
which could cause confusion and duplicate dependencies. Additionally,
the `vendor` directory has special behaviour in the language server, so
importing from the folder will definitely cause confusion and issues
there.
Fixes this error message:
```
error: missing field `now` at line 32 column 1
```
This would occur if someone used an old version of the deno_cache
library to cache information in the cache then tried to load it with the
latest CLI. Regression in the last patch when migrating to the
deno_cache_dir crate.
Properly handle the `SQLITE_BUSY` error code by retrying the
transaction.
Also wraps database initialization logic in a transaction to protect
against incomplete/concurrent initializations.
Fixes https://github.com/denoland/deno/issues/20116.
The goal of this PR is to address issue #20106 where a `TypeError`
occurs when the variables `uid` and `gid` from `userInfo()` in `node:os`
are reassigned if the user is on Windows. Both `uid` and `gid` are
marked as `const` therefore producing a `TypeError` when the two are
reassigned.
This PR achieves that goal by marking `uid` and `gid` as `let`
To fix bugs around detection of when node emulation is required, we will
just eagerly initialize it. The improvements we make to reduce the
impact of the startup time:
- [x] Process stdin/stdout/stderr are lazily created
- [x] node.js global proxy no longer allocates on each access check
- [x] Process checks for `beforeExit` listeners before doing expensive
shutdown work
- [x] Process should avoid adding global event handlers until listeners
are added
Benchmarking this PR (`89de7e1ff`) vs main (`41cad2179`)
```
12:36 $ third_party/prebuilt/mac/hyperfine --warmup 100 -S none './deno-41cad2179 run ./empty.js' './deno-89de7e1ff run ./empty.js'
Benchmark 1: ./deno-41cad2179 run ./empty.js
Time (mean ± σ): 24.3 ms ± 1.6 ms [User: 16.2 ms, System: 6.0 ms]
Range (min … max): 21.1 ms … 29.1 ms 115 runs
Benchmark 2: ./deno-89de7e1ff run ./empty.js
Time (mean ± σ): 24.0 ms ± 1.4 ms [User: 16.3 ms, System: 5.6 ms]
Range (min … max): 21.3 ms … 28.6 ms 126 runs
```
Fixes https://github.com/denoland/deno/issues/20142
Fixes https://github.com/denoland/deno/issues/15826
Fixes https://github.com/denoland/deno/issues/20028
The goal of this PR is to address issue #19520 where Deno panics when
encountering an invalid SSL certificate.
This PR achieves that goal by removing an `.expect()` statement and
implementing a match statement on `tsl_config` (found in
[/ext/net/ops_tsl.rs](e071382768/ext/net/ops_tls.rs (L1058)))
to check whether the desired configuration is valid
---------
Co-authored-by: Matt Mastracci <matthew@mastracci.com>
Fix #20022, fix #19627 (duplicate)
#17333 upgraded clap from version 3.1 to version 4. clap version 3.2.0
(intentionally) broke a behavior that deno was relying on to make `deno
run --v8-flags=--help` work without specifying a file, see
clap-rs/clap#3793. The workaround was to make the script argument
required _unless_ `--v8-flags` is present. This broke the expectation
that all successfully parsed `run` commands have the script argument
set, leading to the panic on
`matches.remove_many::<String>("script_arg").unwrap()`.
Clap, as far as I was able to find out, does not currently offer a neat
solution to this problem. This PR adds logic to create and return a
custom clap error when a parsed run command does not have the script
argument.
I added an appropriate test.
Handles ASCCI espace chars in test and bench name making
test and bench reporting more reliable. This one is also tested
in the fixture of "node:test" module.
Rename some of the helper methods on the Fs trait to be suffixed with
`_sync` / `_async`, in preparation of the introduction of more async
methods for some helpers.
Also adds a `read_text_file_async` helper to complement the renamed
`read_text_file_sync` helper.
This commit moves `snapshot_from_lockfile` function to [deno_npm
crate](https://github.com/denoland/deno_npm). This allows this function
to be called outside Deno CLI (in particular, Deno Deploy).
Not sure why `40_testing.js` is there. The other two `00_typescript.js`
and `99_main_compiler.js` should be covered by
`files_loaded_during_snapshot` at the end.
This helps with `__runtime_js_sources` wrt changing `40_testing.js`.
Renames the unstable `deno_modules` directory and corresponding settings
to `vendor` after feedback. Also causes the vendoring of the
`node_modules` directory which can be disabled via
`--node-modules-dir=false` or `"nodeModulesDir": false`.
This changes the design of the manifest.json file to have a separate
"folders" map for mapping hashed directories. This allows, for example,
to add files in a folder like `http_localhost_8000/#testing_5de71/` and
have them be resolved automatically as long as their remaining
components are identity-mappable to the file system (not hashed). It
also saves space in the manifest.json file by only including the hashed
directory instead of each descendant file.
```
// manifest.json
{
"folders": {
"https://localhost/NOT_MAPPABLE/": "localhost/#not_mappable_5cefgh"
},
"modules": {
"https://localhost/folder/file": {
"headers": {
"content-type": "application/javascript"
}
},
}
}
// folder structure
localhost
- folder
- #file_2defn (note: I've made up the hashes in these examples)
- #not_mappable_5cefgh
- mod.ts
- etc.ts
- more_files.ts
```
Closes #19399 (running without snapshots at all was suggested as an
alternative solution).
Adds a `__runtime_js_sources` pseudo-private feature to load extension
JS sources at runtime for faster development, instead of building and
loading snapshots or embedding sources in the binary. Will only work in
a development environment obviously.
Try running `cargo test --features __runtime_js_sources
integration::node_unit_tests::os_test`. Then break some behaviour in
`ext/node/polyfills/os.ts` e.g. make `function cpus() {}` return an
empty array, and run it again. Fix and then run again. No more build
time in between.
Chipping away at making tests faster. Appears we don't need double
timeout before sanitizing ops. This should cut baseline cost of running a test
by half.
This commit adds new "--deny-*" permission flags. These are complimentary to
"--allow-*" flags.
These flags can be used to restrict access to certain resources, even if they
were granted using "--allow-*" flags or the "--allow-all" ("-A") flag.
Eg. specifying "--allow-read --deny-read" will result in a permission error,
while "--allow-read --deny-read=/etc" will allow read access to all FS but the
"/etc" directory.
Runtime permissions APIs ("Deno.permissions") were adjusted as well, mainly
by adding, a new "PermissionStatus.partial" field. This field denotes that
while permission might be granted to requested resource, it's only partial (ie.
a "--deny-*" flag was specified that excludes some of the requested resources).
Eg. specifying "--allow-read=foo/ --deny-read=foo/bar" and then querying for
permissions like "Deno.permissions.query({ name: "read", path: "foo/" })"
will return "PermissionStatus { state: "granted", onchange: null, partial: true }",
denoting that some of the subpaths don't have read access.
Closes #18804.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Nayeem Rahman <nayeemrmn99@gmail.com>
This commit adds a "dot" reporter to "deno test" subcommand,
that can be activated using "--dot" flag.
It provides a concise output using:
- "." for passing test
- "," for ignored test
- "!" for failing test
User output is silenced and not printed to the console.
In non-TTY environments each result is printed on a separate line.
This commit provides basic polyfill for "node:test" module. Currently
only top-level "test" function is polyfilled, all remaining functions from
that module throw not implemented errors.
Closes https://github.com/denoland/deno/issues/17251
Closes #19970
This commits adds logic to retry failed module downloads once.
Both request and server errors are handled and the retry is done after
50 ms wait time.
I'm not sure why, but sending SIGABRT to Deno on my machine as part of
this test causes it to lock up very badly, leaving it in an unkillable
`UE+` state.
This showed up after #19333, but was not caused by it.
Closes #17589.
```ts
Deno.bench("foo", async (t) => {
const resource = setup(); // not included in measurement
t.start();
measuredOperation(resource);
t.end();
resource.close(); // not included in measurement
});
```
This PR fixes #19818. The problem was that the new InnerRequest class does not initialize the fields urlList and urlListProcessed that are used during a request clone. The solution aims to be straightforward by simply initializing the missing properties during the clone process. I also implemented a "cache" to the url getter of the new InnerRequest, avoiding the cost of calling op_http_get_request_method_and_url.
Source code is now not cloned anymore between eszip and deno_core, as
eszip now
returns `Arc<[u8]>`, that can be trivially casted into `Arc<str>`, which
`deno_core` can consume without copying.
This commit makes the following changes
- Created a `CompoundTestReporter` to allow us to use multiple reporters
- Implements `JUnitTestReporter` which writes JUnit XML to a path
- Added a CLI flag/option `--junit` that enables JUnit reporting. By
default this writes the report to `stdout` (and disables pretty
reporting). If a path is provided, it will write the JUnit report to
that file while the pretty reporter writes to stdout like normal
Output of `deno -- test --allow-all --unstable
--location=http://js-unit-tests/foo/bar --junit
cli/tests/unit/testing_test.ts `
```xml
<?xml version="1.0" encoding="UTF-8"?>
<testsuites name="deno test" tests="7" failures="0" errors="0" time="0.176">
<testsuite name="file:///Users/cooper/deno/deno/cli/tests/unit/testing_test.ts" tests="7" disabled="0" errors="0" failures="0">
<testcase name="testWrongOverloads" time="0.012">
</testcase>
<testcase name="nameOfTestCaseCantBeEmpty" time="0.009">
</testcase>
<testcase name="invalidStepArguments" time="0.008">
</testcase>
<testcase name="nameOnTextContext" time="0.029">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="originOnTextContext" time="0.030">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="parentOnTextContext" time="0.030">
<properties>
<property name="step[passed]" value="step ... nested step"/>
<property name="step[passed]" value="step"/>
</properties>
</testcase>
<testcase name="explicit undefined for boolean options" time="0.009">
</testcase>
</testsuite>
</testsuites>
```
We weren't auto-discovering the deno.json in two cases:
1. A project that didn't have a deno.json and just added one.
2. After a syntax error in the deno.json.
This now rediscovers it in both these cases.
Closes https://github.com/denoland/vscode_deno/issues/867
Code run within Deno-mode and Node-mode should have access to a
slightly different set of globals. Previously this was done through a
compile time code-transform for Node-mode, but this is not ideal and has
many edge cases, for example Node's globalThis having a different
identity than Deno's globalThis.
This commit makes the `globalThis` of the entire runtime a semi-proxy.
This proxy returns a different set of globals depending on the caller's
mode. This is not a full proxy, because it is shadowed by "real"
properties on globalThis. This is done to avoid the overhead of a full
proxy for all globalThis operations.
The globals between Deno-mode and Node-mode are now properly segregated.
This means that code running in Deno-mode will not have access to Node's
globals, and vice versa. Deleting a managed global in Deno-mode will
NOT delete the corresponding global in Node-mode, and vice versa.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Closes https://github.com/denoland/deno/issues/15277
This commit adds a single "warmup" run of empty function when running
`deno bench`.
This change will break so-called "JIT bias" which makes V8 optimize the
first function
and then bail out of optimization on second function. In essence the
"warmup" function
is getting optimized and then all user benches are bailed out of
optimization.
This PR breaks the addition of the `TestReporter` trait and refactoring
of `PrettyTestReporter` out of #19747. The goal is to enable the
addition of test reporters, including machine readable output.
Part of #19774. This makes it twice as fast on my machine.
Stores a file at `node_modules/.deno/setup-cache.bin`, which contains
information about how the node_modules folder is currently setup.
Obviously there is a risk that this information will get out of date
with the current folder structure.
This commit adds some regression tests for using `jsxImportSource` in
the config file in combination with an import map.
These underlying issues were fixed by #15561.
Closes #13389
Closes #14723
---------
Co-authored-by: Aapo Alasuutari <aapo.alasuutari@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This commit stabilizes "Deno.serve()", which becomes the
preferred way to create HTTP servers in Deno.
Documentation was adjusted for each overload of "Deno.serve()"
API and the API always binds to "127.0.0.1:8000" by default.
This PR changes Web IDL interfaces to be declared with `var` instead of
`class`, so that accessing them via `globalThis` does not raise type
errors.
Closes #13390.
This is a fix for issue #19644, concerning the `parseCssColor` function
in the file `ext/console/01_console.js`. Changes made on lines
2756-2758. To sum it up:
> The internal `parseCssColor` function currently parses 3/4-digit hex
colors incorrectly. For example, it parses the string `#FFFFFF` as
`[255, 255, 255]` (as expected), but returns `[240, 240, 240]` for
`#FFF`, when it should return the same triplet as the former.
While it's not going to cause a fatal runtime error, it did bug me
enough to fix it real quick.
…nclusion" (#19519)"
This reverts commit 28a4f3d0f5.
This change causes failures when used outside Deno repo:
```
============================================================
Deno has panicked. This is a bug in Deno. Please report this
at https://github.com/denoland/deno/issues/new.
If you can reliably reproduce this panic, include the
reproduction steps and re-run with the RUST_BACKTRACE=1 env
var set and include the backtrace in your report.
Platform: linux x86_64
Version: 1.34.3+b37b286
Args: ["/opt/hostedtoolcache/deno/0.0.0-b37b286f7fa68d5656f7c180f6127bdc38cf2cf5/x64/deno", "test", "--doc", "--unstable", "--allow-all", "--coverage=./cov"]
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value: Failed to read "/home/runner/work/deno/deno/core/00_primordials.js"
Caused by:
No such file or directory (os error 2)', core/runtime/jsruntime.rs:699:8
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
Relands #19463. This time the `ExtensionFileSourceCode` enum is
preserved, so this effectively just splits feature
`include_js_for_snapshotting` into `exclude_js_sources` and
`runtime_js_sources`, adds a `force_include_js_sources` option on
`extension!()`, and unifies `ext::Init_ops_and_esm()` and
`ext::init_ops()` into `ext::init()`.
Fixes #19568
Values are not coerced to the desired type during deserialisation. This
makes serde_v8 stricter.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
