This commit adds capability to format HTML, Svelte, Vue, Astro and Angular
files.
"--unstable-html" is required to format HTML files, and "--unstable-component"
flag is needed to format other formats. These can also be specified in the config
file.
Close #25015
This PR integrates [Malva](https://github.com/g-plane/malva) into `deno
fmt`, which introduces the ability to format CSS, SCSS, Sass and Less
files.
On Linux x64 6.10, this PR increases about 800KiB:
```
❯ wc -c target/release/deno
125168728 target/release/deno
❯ wc -c target/release/deno
124349456 target/release/deno
```
This moves YAML formatting behind an unstable flag for Deno 1.46. This
will make it opt-in to start and then we can remove the flag to make it
on by default in version of Deno after that.
This can be specified by doing `deno fmt --unstable-yaml` or by
specifying the following in a deno.json file:
```json
{
"unstable": ["fmt-yaml"]
}
```
```
> deno upgrade
error: Unsupported lockfile version 'invalid'. Try upgrading Deno or recreating the lockfile.
V:\scratch
> V:\deno\target\debug\deno upgrade
Looking up latest version
Local deno version 1.45.3 is the most recent release
```
Closes #24517
Closes #20729
This is in preparation for extracting out node resolution code from
ext/node (which is something I'm going to do gradually over time).
Uses https://github.com/denoland/deno_package_json
This makes bare specifiers for npm packages work when inside a
workspace, which emulates the same behaviour as when there's a
node_modules directory. The bare specifier can be overwritten by
specifying an import map entry or package.json dependency entry.
* https://github.com/denoland/deno_config/pull/88
Closes #24605
Adds support for running npm package lifecycle scripts, opted into via a
new `--allow-scripts` flag.
With this PR, when running `deno cache` (or `DENO_FUTURE=1 deno
install`) you can specify the `--allow-scripts=pkg1,pkg2` flag to run
lifecycle scripts attached to the given packages.
Note at the moment this only works when `nodeModulesDir` is true (using
the local resolver).
When a package with un-run lifecycle scripts is encountered, we emit a
warning suggesting things may not work and to try running lifecycle
scripts. Additionally, if a package script implicitly requires
`node-gyp` and it's not found on the system, we emit a warning.
Extra things in this PR:
- Extracted out bits of `task.rs` into a separate module for reuse
- Added a couple fields to `process.config` in order to support
`node-gyp` (it relies on a few variables being there)
- Drive by fix to downloading new npm packages to test registry
---
TODO:
- [x] validation for allow-scripts args (make sure it looks like an npm
package)
- [x] make allow-scripts matching smarter
- [ ] figure out what issues this closes
---
Review notes:
- This adds a bunch of deps to our test registry due to using
`node-gyp`, so it's pretty noisy
This adds object config for the workspace config:
```json
{
"workspace": {
"members": ["./member-1", "./member-2"]
}
}
```
This is a more verbose version of `"workspace": ["./member-1",
"./member-2"]`. Although we don't need it at the moment, it makes the
naming of `"workspace"` more clear and leaves the object open for more
config in the future.
Closes https://github.com/denoland/deno/issues/24456
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
Closes #18296.
Adds a `--frozen` (alias `--frozen-lockfile`) flag that errors out if
the lockfile is out of date. This is useful for running in CI (where an
out of date lockfile is usually a mistake) or to prevent accidental
changes in dependencies.
As suggested in
https://github.com/denoland/deno/pull/24355#discussion_r1657875422.
I wasn't able to hide the mutex stuff as much as I'd like (ended up just
adding an escape hatch `inner()` method that locks the inner mutex),
because you can't return references to the inner fields through a mutex.
This is mostly motivated by the frozen lockfile changes
Also removes permissions being passed in for node resolution. It was
completely useless because we only checked it for reading package.json
files, but Deno reading package.json files for resolution is perfectly
fine.
My guess is this is also a perf improvement because Deno is doing less
work.
In https://github.com/denoland/deno/pull/23955 we changed the sqlite db
journal mode to WAL. This causes issues when someone is running an old
version of Deno using TRUNCATE and a new version because the two fight
against each other.
This commit adds initial support for ".npmrc" files.
Currently we only discover ".npmrc" files next to "package.json" files
and discovering these files in user home dir is left for a follow up.
This pass supports "_authToken" and "_auth" configuration
for providing authentication.
LSP support has been left for a follow up PR.
Towards https://github.com/denoland/deno/issues/16105
By default, uses a 60 second timeout, backing off 2x each time (can be
overridden using the hidden `DENO_SLOW_TEST_TIMEOUT` which we implement
only really for spec testing.
```
Deno.test(async function test() {
await new Promise(r => setTimeout(r, 130_000));
});
```
```
$ target/debug/deno test /tmp/test_slow.ts
Check file:///tmp/test_slow.ts
running 1 test from ../../../../../../tmp/test_slow.ts
test ...'test' is running very slowly (1m0s)
'test' is running very slowly (2m0s)
ok (2m10s)
ok | 1 passed | 0 failed (2m10s)
```
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Construct a new module graph container for workers instead of sharing it
with the main worker.
Fixes #17248
Fixes #23461
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
VScode will typically send a `textDocument/semanticTokens/full` request
followed by `textDocument/semanticTokens/range`, and occassionally
request semantic tokens even when we know nothing has changed. Semantic
tokens also get refreshed on each change. Computing semantic tokens is
relatively heavy in TSC, so we should avoid it as much as possible.
Caches the semantic tokens for open documents, to avoid making TSC do
unnecessary work. Results in a noticeable improvement in local
benchmarking
before:
```
Starting Deno benchmark
-> Start benchmarking lsp
- Simple Startup/Shutdown
(10 runs, mean: 383ms)
- Big Document/Several Edits
(5 runs, mean: 1079ms)
- Find/Replace
(10 runs, mean: 59ms)
- Code Lens
(10 runs, mean: 440ms)
- deco-cx/apps Multiple Edits + Navigation
(5 runs, mean: 9921ms)
<- End benchmarking lsp
```
after:
```
Starting Deno benchmark
-> Start benchmarking lsp
- Simple Startup/Shutdown
(10 runs, mean: 395ms)
- Big Document/Several Edits
(5 runs, mean: 1024ms)
- Find/Replace
(10 runs, mean: 56ms)
- Code Lens
(10 runs, mean: 438ms)
- deco-cx/apps Multiple Edits + Navigation
(5 runs, mean: 8927ms)
<- End benchmarking lsp
```
Moves sloppy import resolution from the loader to the resolver.
Also adds some test helper functions to make the lsp tests less verbose
---------
Co-authored-by: David Sherret <dsherret@gmail.com>
Fixes the `Debug Failure` errors described in
https://github.com/denoland/deno/issues/23643#issuecomment-2094552765 .
The issue here was that we were passing diagnostic codes as strings but
TSC expects the codes to be numbers. This resulted in some quick fixes
not working (as illustrated by the test added here which fails before
this PR).
The first commit is the actual fix. The rest are just test related.
Fixes #23643.
We weren't catching the cancellation exception thrown by TSC on the JS
side, so the rust side was catching this exception and then attempting
to print out the exception via `toString`. That last bit resulted in a
cryptic `[object Object]` showing up in the logs like so:
```
Error during TS request "getCompletionEntryDetails":
[object Object]
```
I'm not 100% sure how we weren't seeing this in the past. My guess is
that #23409 and the subsequent PR to improve the exception catching and
logging surfaced this, but I'm still not quite clear on it.
My initial fix here returned `null` to rust when a server request was
cancelled, but this resulted in a deserialization error when we
attempted to deserialize that into the expected response type. So now,
as soon as the request's cancellation token signals we'll stop waiting
for a response and return an error (which will get swallowed as the LSP
request is being cancelled).
I was a bit surprised to find that [this
branch](0c671c9792/cli/lsp/tsc.rs (L1093))
actually executes sometimes, I believe due to the fact that aborting a
future may not [immediately stop its
execution](https://docs.rs/futures/latest/futures/stream/struct.AbortHandle.html#method.abort).
Before this PR, there would just be an uninformative "Error occurred"
message, after this PR you'll get a stack trace in the LSP output window
like this:
```text
Error during TS request "$getSupportedCodeFixes":
Error: i threw an exception
at serverRequest (ext:deno_tsc/99_main_compiler.js:1089:11)
```
