This commit re-implements `ext/fetch` and all dependent crates
using `hyper` and `hyper-util`, instead of `reqwest`.
The reasoning is that we want to have greater control and access
to low level `hyper` APIs when implementing `fetch` API as well
as `node:http` module.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Adds much better support for the unstable Deno workspaces as well as
support for npm workspaces. npm workspaces is still lacking in that we
only install packages into the root node_modules folder. We'll make it
smarter over time in order for it to figure out when to add node_modules
folders within packages.
This includes a breaking change in config file resolution where we stop
searching for config files on the first found package.json unless it's
in a workspace. For the previous behaviour, the root deno.json needs to
be updated to be a workspace by adding `"workspace":
["./path-to-pkg-json-folder-goes-here"]`. See details in
https://github.com/denoland/deno_config/pull/66
Closes #24340
Closes #24159
Closes #24161
Closes #22020
Closes #18546
Closes #16106
Closes #24160
This commit updates Deno to use `reqwest` at 0.12.4
and `rustls` at 0.22. Other related crates were updated
as well to match versions accepted by `reqwest` and `rustls`.
Note: we are not using the latest available `rustls` yet,
but this upgrade was non-trivial already, so a bump to
0.23 for `rustls` will be done in a separate commit.
Closes #23370
---------
Signed-off-by: Ryan Dahl <ry@tinyclouds.org>
Signed-off-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
In https://github.com/denoland/deno/pull/23955 we changed the sqlite db
journal mode to WAL. This causes issues when someone is running an old
version of Deno using TRUNCATE and a new version because the two fight
against each other.
This patch fixes stdin read hanging on user input when switching tty
mode on Windows
Fixes #21111
On Windows, when switching from line to raw mode:
- Cancel ongoing console read by writing a return keypress to its input
buffer. This blocks the main thread until any ongoing read has been
cancelled to prevent interference with the screen state.
- On the read thread, restore the cursor position to where it was before
writing the enter, undoing its effect on the screen state.
- Restart reading and notify the main thread.
Precursor to #23236
This implements the SNI features, but uses private symbols to avoid
exposing the functionality at this time. Note that to properly test this
feature, we need to add a way for `connectTls` to specify a hostname.
This is something that should be pushed into that API at a later time as
well.
```ts
Deno.test(
{ permissions: { net: true, read: true } },
async function listenResolver() {
let sniRequests = [];
const listener = Deno.listenTls({
hostname: "localhost",
port: 0,
[resolverSymbol]: (sni: string) => {
sniRequests.push(sni);
return {
cert,
key,
};
},
});
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-1",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
{
const conn = await Deno.connectTls({
hostname: "localhost",
[serverNameSymbol]: "server-2",
port: listener.addr.port,
});
const [_handshake, serverConn] = await Promise.all([
conn.handshake(),
listener.accept(),
]);
conn.close();
serverConn.close();
}
assertEquals(sniRequests, ["server-1", "server-2"]);
listener.close();
},
);
```
---------
Signed-off-by: Matt Mastracci <matthew@mastracci.com>
This PR adds private `[REF]()` and `[UNREF]()` methods to Stdin class,
and call them from Node.js polyfill layer (`TTY` class). This enables
`process.stdin.unref()` and `process.stdin.ref()` for the case when
stdin is terminal.
closes #21796
This commit changes the workspace support to provide all workspace
members to be available as imports based on their names and versions.
Closes https://github.com/denoland/deno/issues/23343
<!--
Before submitting a PR, please read
https://docs.deno.com/runtime/manual/references/contributing
1. Give the PR a descriptive title.
Examples of good title:
- fix(std/http): Fix race condition in server
- docs(console): Update docstrings
- feat(doc): Handle nested reexports
Examples of bad title:
- fix #7123
- update docs
- fix bugs
2. Ensure there is a related issue and it is referenced in the PR text.
3. Ensure there are tests that cover the changes.
4. Ensure `cargo test` passes.
5. Ensure `./tools/format.js` passes without changing files.
6. Ensure `./tools/lint.js` passes.
7. Open as a draft PR if your work is still in progress. The CI won't
run
all steps, but you can add '[ci]' to a commit message to force it to.
8. If you would like to run the benchmarks on the CI, add the 'ci-bench'
label.
-->
This PR wires up a new `jsxPrecompileSkipElements` option in
`compilerOptions` that can be used to exempt a list of elements from
being precompiled with the `precompile` JSX transform.
Embedders may have special requirements around file opening, so we add a
new `check_open` permission check that is called as part of the file
open process.
This PR enables V8 code cache for ES modules and for `require` scripts
through `op_eval_context`. Code cache artifacts are transparently stored
and fetched using sqlite db and are passed to V8. `--no-code-cache` can
be used to disable.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
The permission prompt doesn't wait for quiescent input, so someone
pasting a large text file into the console may end up losing the prompt.
We enforce a minimum human delay and wait for a 100ms quiescent period
before we write and accept prompt input to avoid this problem.
This does require adding a human delay in all prompt tests, but that's
pretty straightforward. I rewrote the locked stdout/stderr test while I
was in here.
Some `deno_std` tests were failing to print output that was resolved
after the last test finished. In addition, output printed before tests
began would sometimes appear above the "running X tests ..." line, and
sometimes below it depending on timing.
We now guarantee that all output is flushed before and after tests run,
making the output consistent.
Pre-test and post-test output are captured in `------ pre-test output
------` and `------ post-test output ------` blocks to differentiate
them from the regular output blocks.
Here's an example of a test (that is much noisier than normal, but an
example of what the output will look like):
```
Check ./load_unload.ts
------- pre-test output -------
load
----- output end -----
running 1 test from ./load_unload.ts
test ...
------- output -------
test
----- output end -----
test ... ok ([WILDCARD])
------- post-test output -------
unload
----- output end -----
```
If we strip out unprintable chars, we don't see the full filename being
requested by permission prompts. Instead, we highlight and escape them
to make them visible.
This changes the lockfile to not store JSR specifiers in the "remote"
section. Instead a single JSR integrity is stored per package in the
lockfile, which is a hash of the version's `x.x.x_meta.json` file, which
contains hashes for every file in the package. The hashes in this file
are then compared against when loading.
Additionally, when using `{ "vendor": true }` in a deno.json, the files
can be modified without causing lockfile errors—the checksum is only
checked when copying into the vendor folder and not afterwards
(eventually we should add this behaviour for non-jsr specifiers as
well). As part of this change, the `vendor` folder creation is not
always automatic in the LSP and running an explicit cache command is
necessary. The code required to track checksums in the LSP would have
been too complex for this PR, so that all goes through deno_graph now.
The vendoring is still automatic when running from the CLI.
This looks like a massive PR, but it's only a move from cli/tests ->
tests, and updates of relative paths for files.
This is the first step towards aggregate all of the integration test
files under tests/, which will lead to a set of integration tests that
can run without the CLI binary being built.
While we could leave these tests under `cli`, it would require us to
keep a more complex directory structure for the various test runners. In
addition, we have a lot of complexity to ignore various test files in
the `cli` project itself (cargo publish exclusion rules, autotests =
false, etc).
And finally, the `tests/` folder will eventually house the `test_ffi`,
`test_napi` and other testing code, reducing the size of the root repo
directory.
For easier review, the extremely large and noisy "move" is in the first
commit (with no changes -- just a move), while the remainder of the
changes to actual files is in the second commit.
2024-02-10 20:22:13 +00:00
Renamed from cli/tests/integration/run_tests.rs (Browse further)
