This commit changes how "disabled" ops behave. Instead of using "void"
functions under the hood, they now explicitly throw errors saying
that a given op doesn't exist.
This commit changes the build process in a way that preserves already
registered ops in the snapshot. This allows us to skip creating hundreds of
"v8::String" on each startup, but sadly there is still some op registration
going on startup (however we're registering 49 ops instead of >200 ops).
This situation could be further improved, by moving some of the ops
from "runtime/" to a separate extension crates.
---------
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
This commit merges "runtime/js/40_spawn.js" into
"runtime/js/40_process.js", and "runtime::ops::spawn"
into "runtime::ops::process".
It makes little sense to have them separated given that we want to
factor out these APIs into a separate extension crate.
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
This commit changes implementation of "Deno.memoryUsage()" to return
correct value for "rss" field. To do that we implement a specialized function
per os to retrieve this information.
This commit removes three unstable Deno APIs:
- "Deno.spawn()"
- "Deno.spawnSync()"
- "Deno.spawnChild()"
These APIs were replaced by a unified "Deno.Command" API.
Uses SeqOneByteString optimization to do zero-copy `&str` arguments in
fast calls.
- [x] Depends on https://github.com/denoland/rusty_v8/pull/1129
- [x] Depends on
https://chromium-review.googlesource.com/c/v8/v8/+/4036884
- [x] Disable in async ops
- [x] Make it work with owned `String` with an extra alloc in fast path.
- [x] Support `Cow<'_, str>`. Owned for slow case, Borrowed for fast
case
```rust
#[op]
fn op_string_len(s: &str) -> u32 {
str.len() as u32
}
```
This PR adds copies of several unstable APIs that are available
in "Deno[Deno.internal].nodeUnstable" namespace.
These copies do not perform unstable check (ie. don't require
"--unstable" flag to be present). Otherwise they work exactly
the same, including permission checks.
These APIs are not meant to be used by users directly and
can change at any time.
Copies of following APIs are available in that namespace:
- Deno.spawnChild
- Deno.spawn
- Deno.spawnSync
- Deno.serve
- Deno.upgradeHttpRaw
- Deno.listenDatagram
This commit stabilizes "Deno.consoleSize()" API.
There is one change compared to previous unstable API,
in that the API doesn't accept any arguments. Console size
is established by querying syscalls for stdio streams at fd
0, 1 and 2.
This commit removes the calls to `expect()` on `std::rc::Rc`, which caused
Deno to panic under certain situations. We now return an error if `Rc`
is referenced by other variables.
Fixes #9360
Fixes #13345
Fixes #13926
Fixes #16241
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This change adds `windowsRawArguments` to `SpawnOptions`. The option enables
skipping the default quoting and escaping while creating the command on
windows.
The option works in a similar way as `windowsVerbatimArguments` in
child_process.spawn options in Node.js, and is necessary for simulating
it in `std/node`.
closes #8852
This commit introduces two new buffer wrapper types to `deno_core`. The
main benefit of these new wrappers is that they can wrap a number of
different underlying buffer types. This allows for a more flexible read
and write API on resources that will require less copying of data
between different buffer representations.
- `BufView` is a read-only view onto a buffer. It can be backed by
`ZeroCopyBuf`, `Vec<u8>`, and `bytes::Bytes`.
- `BufViewMut` is a read-write view onto a buffer. It can be cheaply
converted into a `BufView`. It can be backed by `ZeroCopyBuf` or
`Vec<u8>`.
Both new buffer views have a cursor. This means that the start point of
the view can be constrained to write / read from just a slice of the
view. Only the start point of the slice can be adjusted. The end point
is fixed. To adjust the end point, the underlying buffer needs to be
truncated.
Readable resources have been changed to better cater to resources that
do not support BYOB reads. The basic `read` method now returns a
`BufView` instead of taking a `ZeroCopyBuf` to fill. This allows the
operation to return buffers that the resource has already allocated,
instead of forcing the caller to allocate the buffer. BYOB reads are
still very useful for resources that support them, so a new `read_byob`
method has been added that takes a `BufViewMut` to fill. `op_read`
attempts to use `read_byob` if the resource supports it, which falls
back to `read` and performs an additional copy if it does not. For
Rust->JS reads this change should have no impact, but for Rust->Rust
reads, this allows the caller to avoid an additional copy in many
scenarios. This combined with the support for `BufView` to be backed by
`bytes::Bytes` allows us to avoid one data copy when piping from a
`fetch` response into an `ext/http` response.
Writable resources have been changed to take a `BufView` instead of a
`ZeroCopyBuf` as an argument. This allows for less copying of data in
certain scenarios, as described above. Additionally a new
`Resource::write_all` method has been added that takes a `BufView` and
continually attempts to write the resource until the entire buffer has
been written. Certain resources like files can override this method to
provide a more efficient `write_all` implementation.
Stop allowing clippy::derive-partial-eq-without-eq and fix warnings
about deriving PartialEq without also deriving Eq.
In one case I removed the PartialEq because it a) wasn't necessary,
and b) sketchy because it was comparing floating point numbers.
IMO, that's a good argument for enforcing the lint rule, because it
would most likely have been caught during review if it had been enabled.
This commit allows the Node compatibility layer to skip
environment variable permission checks when --unstable
is passed and the variable name is one that Node uses.
Fixes: https://github.com/denoland/deno/issues/15890
This commit removes "WorkerOptions.deno" option as a boolean,
as well as "WorkerOptions.deno.namespace" settings. Starting
with this commit all workers have access to "Deno" namespace
by default.
Calling `worker.terminate()` used to kill the worker's isolate and
then block until the worker's thread finished. This blocks the calling
thread if the worker's event loop was blocked in a sync op (as with
`Deno.sleepSync`), which wasn't realized at the time, but since the
worker's isolate was killed at that moment, it would not block the
calling thread if the worker was in a JS endless loop.
However, in #12831, in order to work around a V8 bug, worker
termination was changed to first set a signal to let the worker event
loop know that termination has been requested, and only kill the
isolate if the event loop has not finished after 2 seconds. However,
this change kept the blocking, which meant that JS endless loops in
the worker now blocked the parent for 2 seconds.
As it turns out, after #12831 it is fine to signal termination and
even kill the worker's isolate without waiting for the thread to
finish, so this change does that. However, that might leave the async
ops that receive messages and control data from the worker pending
after `worker.terminate()`, which leads to odd results from the op
sanitizer. Therefore, we set up a `CancelHandler` to cancel those ops
when the worker is terminated.
This commit:
- removes "fmt_errors::PrettyJsError" in favor of "format_js_error" fn
- removes "deno_core::JsError::create" and
"deno_core::RuntimeOptions::js_error_create_fn"
- adds new option to "deno_runtime::ops::worker_host::init"
This commit adds "Deno.upgradeHttp" API, which
allows to "hijack" connection and switch protocols, to eg.
implement WebSocket required for Node compat.
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Adds another callback to WebWorkerOptions that allows to execute
some modules before actual worker code executes. This allows to set up Node
global using std/node.
Add an op to list the network interfaces on the system.
Prep work for #8137 and `os.networkInterfaces()` Node compat in std.
Refs denoland/deno_std#1436.
Fixes "op_set_exit_code" by sharing a single "Arc" between
all workers (via "op state") instead of having a "global" value stored in
"deno_runtime" crate. As a consequence setting an exit code is always
scoped to a tree of workers, instead of being overridable if there are
multiple worker tree (like in "deno test --jobs" subcommand).
Refactored "cli/main.rs" functions to return "Result<i32, AnyError>" instead
of "Result<(), AnyError>" so they can return exit code.
Set the exit code to use if none is provided to Deno.exit(), or when
Deno exits naturally.
Needed for process.exitCode Node compat. Paves the way for #12888.
This commit adds an ability to "ref" or "unref" pending ops.
Up to this point Deno had a notion of "async ops" and "unref async ops";
the former keep event loop alive, while the latter do not block event loop
from finishing. It was not possible to change between op types after
dispatching, one had to decide which type to use before dispatch.
Instead of storing ops in two separate "FuturesUnordered" collections,
now ops are stored in a single collection, with supplemental "HashSet"
storing ids of promises that were "unrefed".
Two APIs were added to "Deno.core":
"Deno.core.refOp(promiseId)" which allows to mark promise id
to be "refed" and keep event loop alive (the default behavior)
"Deno.core.unrefOp(promiseId)" which allows to mark promise
id as "unrefed" which won't block event loop from exiting
This allows resources to be "streams" by implementing read/write/shutdown. These streams are implicit since their nature (read/write/duplex) isn't known until called, but we could easily add another method to explicitly tag resources as streams.
`op_read/op_write/op_shutdown` are now builtin ops provided by `deno_core`
Note: this current implementation is simple & straightforward but it results in an additional alloc per read/write call
Closes #12556
