A few easy migrations of module code from the runtime to the module map.
The module map already has a few places where it needs a handle scope,
so we're not coupling it any further with the v8 runtime.
`init_runtime_module_map` is replaced with an option to reduce API
surface of JsRuntime.
`module_resolve_callback` now lives in the `ModuleMap` and we use a
annex data to avoid having to go through the `Rc<RefCell<...>>` stored
in the `JsRuntime`'s isolate.
… (#19463)"
This reverts commit ceb03cfb03.
This is being reverted because it causes 3.5Mb increase in the binary
size,
due to runtime JS code being included in the binary, even though it's
already snapshotted.
CC @nayeemrmn
Remove `ExtensionFileSourceCode::LoadedFromFsDuringSnapshot` and feature
`include_js_for_snapshotting` since they leak paths that are only
applicable in this repo to embedders. Replace with feature
`exclude_js_sources`. Additionally the feature
`force_include_js_sources` allows negating it, if both features are set.
We need both of these because features are additive and there must be a
way of force including sources for snapshot creation while still having
the `exclude_js_sources` feature. `force_include_js_sources` is only set
for build deps, so sources are still excluded from the final binary.
You can also specify `force_include_js_sources` on any extension to
override the above features for that extension. Towards #19398.
But there was still the snapshot-from-snapshot situation where code
could be executed twice, I addressed that by making `mod_evaluate()` and
scripts like `core/01_core.js` behave idempotently. This allowed
unifying `ext::init_ops()` and `ext::init_ops_and_esm()` into
`ext::init()`.
Rather than disallowing `ext:` resolution, clear the module map after
initializing extensions so extension modules are anonymized. This
operation is explicitly called in `deno_runtime`. Re-inject `node:`
specifiers into the module map after doing this.
Fixes #17717.
Partially supersedes #19016.
This migrates `spawn` and `spawn_blocking` to `deno_core`, and removes
the requirement for `spawn` tasks to be `Send` given our single-threaded
executor.
While we don't need to technically do anything w/`spawn_blocking`, this
allows us to have a single `JoinHandle` type that works for both cases,
and allows us to more easily experiment with alternative
`spawn_blocking` implementations that do not require tokio (ie: rayon).
Async ops (+~35%):
Before:
```
time 1310 ms rate 763358
time 1267 ms rate 789265
time 1259 ms rate 794281
time 1266 ms rate 789889
```
After:
```
time 956 ms rate 1046025
time 954 ms rate 1048218
time 924 ms rate 1082251
time 920 ms rate 1086956
```
HTTP serve (+~4.4%):
Before:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 68.78us 19.77us 1.43ms 86.84%
Req/Sec 68.78k 5.00k 73.84k 91.58%
1381833 requests in 10.10s, 167.36MB read
Requests/sec: 136823.29
Transfer/sec: 16.57MB
```
After:
```
Running 10s test @ http://localhost:4500
2 threads and 10 connections
Thread Stats Avg Stdev Max +/- Stdev
Latency 63.12us 17.43us 1.11ms 85.13%
Req/Sec 71.82k 3.71k 77.02k 79.21%
1443195 requests in 10.10s, 174.79MB read
Requests/sec: 142921.99
Transfer/sec: 17.31MB
```
Suggested-By: alice@ryhl.io
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
1. Boxed `File` and `FileSystem` to allow more easily passing this
through the CLI code (as shown within this pr).
2. `StdFileResource` is now `FileResource`. `FileResource` now contains
an `Rc<dyn File>`.
This is just a straight refactor and I didn't do any cleanup in
ext/node. After this PR we can start to clean it up and make things
private that don't need to be public anymore.
This commit abstracts out the specifics of the underlying system calls
FS operations behind a new `FileSystem` and `File` trait in the
`ext/fs` extension.
This allows other embedders to re-use ext/fs, but substituting in a
different FS backend.
This is likely not the final form of these traits. Eventually they will
be entirely `deno_core::Resource` agnostic, and will live in a seperate
crate.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This is a follow-on to the earlier work in reducing string copies,
mainly focused on ensuring that ASCII strings are easy to provide to the
JS runtime.
While we are replacing a 16-byte reference in a number of places with a
24-byte structure (measured via `std::mem::size_of`), the reduction in
copies wins out over the additional size of the arguments passed into
functions.
Benchmarking shows approximately the same if not slightly less wallclock
time/instructions retired, but I believe this continues to open up
further refactoring opportunities.
This commit changes the type parameter for "deno_node" extension, from
`P: NodePermission` to `Env: NodeEnv`.
`NodeEnv` is a new trait that has associated type `P: NodePermission`.
This is a stepping stone to support swappable file system for the
extension, that will be added as a second associated type to the
`NodeEnv` trait.
This commit changes how data required to bootstrap main and worker
runtime is serialized.
Instead of relying on serde_v8 and using JSON object,
we're doing manual serialization to a "v8::Array". This limits number
of V8 strings that need to be serialized by 16.
It also made it clear that some data could be obtained during
snapshotting instead of during bootstrap.
This commit adds unstable "Deno.openKv()" API that allows to open
a key-value database at a specified path.
---------
Co-authored-by: Luca Casonato <hello@lcas.dev>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Reduce the number of copies and allocations of script code by carrying
around ownership/reference information from creation time.
As an advantage, this allows us to maintain the identity of `&'static
str`-based scripts and use v8's external 1-byte strings (to avoid
incorrectly passing non-ASCII strings, debug `assert!`s gate all string
reference paths).
Benchmark results:
Perf improvements -- ~0.1 - 0.2ms faster, but should reduce garbage
w/external strings and reduces data copies overall. May also unlock some
more interesting optimizations in the future.
This requires adding some generics to functions, but manual
monomorphization has been applied (outer/inner function) to avoid code
bloat.
Moving some code around in `ext/node` is it's a bit better well defined
and makes it possible for others to embed it.
I expect to see no difference in startup perf with this change.
Follow-up to #18210:
* we are passing the generated `cfg` object into the state function
rather than passing individual config fields
* reduce cloning dramatically by making the state_fn `FnOnce`
* `take` for `ExtensionBuilder` to avoid more unnecessary copies
* renamed `config` to `options`
This implements two macros to simplify extension registration and centralize a lot of the boilerplate as a base for future improvements:
* `deno_core::ops!` registers a block of `#[op]`s, optionally with type
parameters, useful for places where we share lists of ops
* `deno_core::extension!` is used to register an extension, and creates
two methods that can be used at runtime/snapshot generation time:
`init_ops` and `init_ops_and_esm`.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
This PR _**temporarily**_ removes WebGPU (which has behind the
`--unstable` flag in Deno), due to performance complications due to its
presence.
It will be brought back in the future; as a point of reference, Chrome
will ship WebGPU to stable on 26/04/2023.
---------
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
To be able to preserve "Deno.core.ops" we need to ensure that
ops are registered in the same order in various places, otherwise
we will get mismatch in external references ordering.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit partially reverts changes from
https://github.com/denoland/deno/pull/18095.
Turns out I made a mistake that became apparent when working
on removing "RuntimeOptions::extensions_with_js" in a follow up.
This commit splits "<ext_name>::init" functions into "init_ops" and
"init_ops_and_esm". That way we don't have to construct list of
ESM sources on each startup if we're running with a snapshot.
In a follow up commit "deno_core" will be changed to not have a split
between "extensions" and "extensions_with_js" - it will be embedders'
responsibility to pass appropriately configured extensions.
Prerequisite for https://github.com/denoland/deno/pull/18080
This commit renames "deno_core::InternalModuleLoader" to
"ExtModuleLoader" and changes the specifiers used by the
modules loaded from this loader to "ext:".
"internal:" scheme was really ambiguous and it's more characters than
"ext:", which should result in slightly smaller snapshot size.
Closes https://github.com/denoland/deno/issues/18020
Since we are snapshotting extension source at build time, there's no
need to define list of sources for the extension at runtime.
This commit changes "deno_node" extension by removing "init_polyfill"
function in favor of "init_polyfill_ops_and_esm()" and "init_polyfill_ops()".
The former is used during snapshot and when "deno_runtime" is compiled
with "dont_create_runtime_snapshot" cargo feature flag. The latter is used
when running a worker from an existing snapshot.
This is a start of a bigger refactor to all extensions - thanks to this
change, we don't have to iterate over all defined source files for extension at
runtime, and because of that we don't have to create a filepath for each of the
source files. It's not a big deal, but we are iterating over 300 files on each start,
and concatenating 3 strings before creating a "PathBuf" for ~200 of them.
This is already visible on the startup flamegraphs and should be avoided.
There's no point for this API to expect result. If something fails it should
result in a panic during build time to signal to embedder that setup is
wrong.
This commit merges "runtime/js/40_spawn.js" into
"runtime/js/40_process.js", and "runtime::ops::spawn"
into "runtime::ops::process".
It makes little sense to have them separated given that we want to
factor out these APIs into a separate extension crate.
This commit further improves startup time by:
- no relying on "JsRuntime::execute_script" for runtime bootstrapping,
this is instead done using V8 APIs directly
- registering error classes during the snapshot time, instead of on
startup
Further improvements can be made, mainly around removing
"core.initializeAsyncOps()" which takes around 2ms.
This commit should result in ~1ms startup time improvement.
This allows to not include source code into the binary (because
it will already be included in the V8 snapshot).
Nothing changes for the embedders - everything should still build the
same.
This commit brings the binary size from 87Mb to 82Mb on M1.
Alternative to https://github.com/denoland/deno/pull/17820 and
https://github.com/denoland/deno/pull/17653
---------
Co-authored-by: Leo Kettmeir <crowlkats@toaxl.com>
This commit moves "deno_std/node" in "ext/node" crate. The code is
transpiled and snapshotted during the build process.
During the first pass a minimal amount of work was done to create the
snapshot, a lot of code in "ext/node" depends on presence of "Deno"
global. This code will be gradually fixed in the follow up PRs to migrate
it to import relevant APIs from "internal:" modules.
Currently the code from snapshot is not used in any way, and all
Node/npm compatibility still uses code from
"https://deno.land/std/node" (or from the location specified by
"DENO_NODE_COMPAT_URL"). This will also be handled in a follow
up PRs.
---------
Co-authored-by: crowlkats <crowlkats@toaxl.com>
Co-authored-by: Divy Srivastava <dj.srivastava23@gmail.com>
Co-authored-by: Yoshiya Hinosawa <stibium121@gmail.com>
This commit stabilizes Node-API, the "--unstable" flag is no longer
required to load native extensions. "--allow-ffi" permission is still
required to load them.
Turns out we were cloning permissions which after prompting were discarded,
so the state of permissions was never preserved. To handle that we need to store
all permissions behind "Arc<Mutex<>>" (because there are situations where we
need to send them to other thread).
Testing and benching code still uses "Permissions" in most places - it's undesirable
to share the same permission set between various test/bench files - otherwise
granting or revoking permissions in one file would influence behavior of other test
files.
This commit makes "npm:" specifiers not require "--unstable" flag.
At the moment some APIs used by Node polyfills still require
"--unstable" which will be addressed in follow up PRs.
This PR implements the NAPI for loading native modules into Deno.
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
Co-authored-by: DjDeveloper <43033058+DjDeveloperr@users.noreply.github.com>
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
