This PR adds prepare_load hook method to ModuleLoader trait. It allows implementors to perform preparation work before starting actual module loading into isolate. It's meant to be used in CLI; where "transpilation" step will be explicitly performed during prepare_load instead of doing it adhoc for each module if needed.
Keep in mind Buffer.toString() still exists, but returns [object Object].
Reason for removal of Buffer.toString() was that it implicitly used
TextDecoder with fixed "utf-8" encoding and no way to customize
the encoding.
This change is to prevent needed a separate stat syscall for each file
when using readdir.
For consistency, this PR also modifies std's `WalkEntry` interface to
extend `DirEntry` with an additional `path` field.
This commit removes "combined" interfaces from cli/js/io.ts; in the
like of "ReadCloser", "WriteCloser" in favor of using intersections
of concrete interfaces.
Changed `URL.port` implementation to match [WHATWG
specifications](https://url.spec.whatwg.org/#port-state).
This PR matches the behaviour of other browsers:
1. a `TypeError` must be thrown when passing an URL with an invalid
port to the constructor.
2. When setting an invalid port, using property setter, I haven't found
what should happen in this case, so I mimic **Firefox** & **Node**
behaviour. If an invalid port is set, it will use the previous value.
**Chrome** sets the value to `'0'` if an invalid port is set. I prefer
to keep the previous valid value. (I can use Chrome's behaviour if you
think it's better, it's a simple value change)
```
url.port = '3000'; // valid
url.port = 'deno'; // invalid
assertEquals(url.port, '3000');
```
3. If the port value equals the current protocol default port value,
`port` will be an empty string.
When creating a console instance, one must pass "printFunc" arg
which is used internally by Console to output messages.
Due to numerous refactors there was a single method ("console.clear()")
that used "Deno.stdout" instead of "printFunc".
This commit unifies how "Console" outpus message, by using
"printFunc" in all methods; consequently "Deno.stdout" is no longer
imported in "cli/js/console.ts" making it a standalone module that doesn't
depend on any CLI-specific APIs.
Deno.runTests() interface is not yet good enough to be exposed
publicly with stability guarantees.
This commit removes public API related to testing: Deno.runTests()
and Deno.TestMessage, but keeps them exposed on Deno.internal object
so they can be used with "deno test" subcommand.
* Allows union and intersection types to have same multi-line behaviour as arguments (more like prettier).
* Stops line breaks before `extends` in conditional type, which would have been a parser error.
* Check for `// dprint-ignore-file` comment before parsing. This allow files that panic in swc to be ignored.
* Fixes a bug in "multi-line" detection.
Refactors Event and EventTarget so that they better encapsulate their
non-public data as well as are more forward compatible with things like
DOM Nodes.
Moves `dom_types.ts` -> `dom_types.d.ts` which was always the intention,
it was a legacy of when we used to build the types from the code and the
limitations of the compiler. There was a lot of cruft in `dom_types`
which shouldn't have been there, and mis-alignment to the DOM standards.
This generally has been eliminated, though we still have some minor
differences from the DOM (like the removal of some deprecated
methods/properties).
Adds `DOMException`. Strictly it shouldn't inherit from `Error`, but
most browsers provide a stack trace when one is thrown, so the behaviour
in Deno actually better matches the browser.
`Event` still doesn't log to console like it does in the browser. I
wanted to get this raised and that could be an enhancement later on (it
currently doesn't either).
- Removes the __fetch namespace from `deno types`
- Response.redirect should be a static.
- Response.body should not be AsyncIterable.
- Disables the deno_proxy benchmark
- Makes std/examples/curl.ts buffer the body before printing to stdout
Fixes #4000 and fixes #4476. Now always tries to fetch reference types
for JS files. Does not throw if it fails, since Typescript compiler will
complain if the file is not there(it will try to fetch it again first)
and people who just use JS should not be bothered by this error.
Not sure about my test, it passes and catches the bug but maybe there is
a better way to express it.
* Reduce "testing" interfaces
* Use a callback instead of a generator for Deno.runTests()
* Default RunTestsOptions::reportToConsole to true
* Compose TestMessage into a single interface
* Properly track isFile, isSymlink, isDirectory
These don't exhaust all the possibilities, so none of them should be
defined as "neither of the others".
* empty
1. Array elements are now grouped the same as in Node.js
2. Limit to 100 (Node.js default) elements to display in iterable
3. Print each element in new line if excessing max line length (same as in Node.js)
4. Print length of the TypedArray
5. Print information about empty items in Array
This is a first pass implementation which is still missing several important
features:
- support for --inspect-brk (#4503)
- support for source maps (#4501)
- support for piping console.log to devtools console (#4502)
Co-authored-by: Bert Belder <bertbelder@gmail.com>
Co-authored-by: Matt Harrison <mt.harrison86@gmail.com>
Co-authored-by: Bartek Iwańczuk <biwanczuk@gmail.com>
* Remove DENO_BUILD_MODE and DENO_BUILD_PATH
Also remove outdated docs related to ninja/gn.
* fix
* remove parameter to build_mode()
* remove arg parsing from benchmark.py
This a complex boring PR that shifts around code (primarily) in cli/fs.rs and
cli/ops/fs.rs. The gain of this refactoring is to ease the way for #4188 and
#4017, and also to avoid some future development pain.
Mostly there is no change in functionality. Except:
* squashed bugs where op_utime and op_chown weren't using `resolve_from_cwd`
* eliminated the use of the external `remove_dir_all` crate.
* op_chmod now only queries metadata to verify file/dir exists on Windows (it
will already fail on Unix if it doesn't)
* op_chown now verifies the file/dir's existence on Windows like chmod does.
* add tests for "Deno.core.encode" and "Deno.core.decode" for empty inputs
* use "Deno.core.encode" in "TextEncoder"
* use "Deno.core.decode" in "TextDecoder"
* remove "core_decode" and "core_encode" benchmarks
After splitting "failFast" and "exitOnFail" arguments, there was a situation where failing tests did not exit with code 1.
* fixed argument value passed to Deno.runTests() in deno test
* fixed argument value passed to Deno.runTests() in std/testing/runner.ts
* added integration tests for deno test to ensure failFast and exitOnFail work as expected
* don't write test file to file system, but keep it in memory
This PR brings assertOps and assertResources sanitizers to Deno.test() API.
assertOps checks that test doesn't leak async ops, ie. there are no unresolved
promises originating from Deno APIs. Enabled by default, can be disabled using
Deno.TestDefinition.disableOpSanitizer.
assertResources checks that test doesn't leak resources, ie. all resources used
in test are closed. For example; if a file is opened during a test case it must be
explicitly closed before test case finishes. It's most useful for asynchronous
generators. Enabled by default, can be disabled using
Deno.TestDefinition.disableResourceSanitizer.
We've used those sanitizers in internal runtime tests and it proved very useful in
surfacing incorrect tests which resulted in interference between the tests.
All tests have been sanitized.
Closes #4208
Fixes #4101
Previously, we would just provide the raw JSON to the TypeScript
compiler worker, but TypeScript does not transform JSON. This caused
a problem when emitting a bundle, that the JSON would just be "inlined"
into the output, instead of being transformed into a module.
This fixes this problem by providing the compiled JSON to the TypeScript
compiler, so TypeScript just sees JSON as a "normal" TypeScript module.
This PR attempts to fix intermittent errors occurring on Windows for "cli/tests/unit_test_runner.ts." Runner has been reworked to create only single TCP listener instead of one listener per worker.
Additionally worker doesn't close TCP socket - it waits for parent process to close the socket and only then exits.
This commit changes output of default test reporter to resemble output from Rust test runner;
first the name of running test is printed with "...", then after test has run result is printed on the same line.
* Split "Deno.TestEvent.Result" into "TestStart" and "TestEnd";
* changes TestReporter interface to support both events;
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
This commits add two new methods to "Deno.core" namespace: "encode" and "decode".
Those methods are bound in Rust to provide a) fast b) generally available of encoding and decoding UTF-8 strings.
Both methods are now used in "cli/js/dispatch_json.ts".
* drop server guard before unit test result check
To prevent cascading test failures when js_unit_test http server
guard is dropped before asserting that tests were successful.
This is really a band-aid and doesn't solve underlying issue with
http server.
* Update CLI for unit_test_runner.ts
* Change cli/js/tests/unit_test_runner.ts command line interface to work in 3
modes:
- "one-off" - run tests that match permissions of currently running
process
- "master" - run tests for all possible permission combinations, by
spawning subprocesses running in "worker" mode and communicating via
TCP socket; requires elevated permissions
- "worker" - run tests for set of permissions provided by CLI arg;
requires elevated permissions to setup TCP connection to "master";
after initial setup process drops permissions to given set
* Support filtering of tests by string passed after "--" CLI arg
* Update cli/js/tests/README.md
Rewrites "cli/js/unit_test_runner.ts" to communicate with spawned subprocesses
using TCP socket.
* Rewrite "Deno.runTests()" by factoring out testing logic to private "TestApi"
class. "TestApi" implements "AsyncIterator" that yields "TestEvent"s,
which is an interface for different types of event occuring during running
tests.
* Add "reporter" argument to "Deno.runTests()" to allow users to provide custom
reporting mechanism for tests. It's represented by "TestReporter" interface,
that implements hook functions for each type of "TestEvent". If "reporter"
is not provided then default console reporting is used (via
"ConsoleReporter").
* Change how "unit_test_runner" communicates with spawned suprocesses. Instead
of parsing text data from child's stdout, a TCP socket is created and used
for communication. "unit_test_runner" can run in either "master" or "worker"
mode. Former is responsible for test discovery and establishing needed
permission combinations; while latter (that is spawned by "master") executes
tests that match given permission set.
* Use "SocketReporter" that implements "TestReporter" interface to send output
of tests to "master" process. Data is sent as stringified JSON and then
parsed by "master" as structured data. "master" applies it's own reporting
logic to output tests to console (by reusing default "ConsoleReporter").
- moves signal definition from "cli/js/process.ts" to "cli/js/signals.ts"
- removes "cli/js/dispatch.ts"
- removes "cli/js/types.ts"
- moves web specific utilities to "cli/js/web/util.ts"
- moves compiler implementation to "cli/js/compiler/" directory
- moves more APIs to "cli/js/web":
* "console.ts"
* "console_table.ts"
* "performance.ts"
* "timers.ts"
* "workers.ts"
- removes some dead code from "cli/js/"
Listener and UDPConn are AsyncIterables instead of AsyncIterators.
The [Symbol.asyncIterator]()s are defined as generators and the
next() methods are gone.
"Listener/Socket has been closed" errors are now BadResource.
All Deno runtime test files were moved to cli/js/tests/ directory.
It makes a clear distinction that cli/js/tests/ contains code
that is run under Deno runtime as opposed to code in cli/js/ which
is used to create bundle and snapshot with "deno_typescript".
Following JS ops were moved to separate files in cli/js/ops directory:
- io
- process
- worker_host
- web_worker
- plugins
- timers
- signal
- permissions
Following JS ops were moved to separate files in cli/js/ops directory:
- compiler
- dispatch_json
- dispatch_minimal
- errors
- fetch
- fs_events
- os
- random
- repl
- resources
- runtime_compiler
- runtime
- tty
There's a lot of variation in doc comments and internal code about
whether chmod/0o777-style permissions are called `mode` or `perm`. (For
example, mkdir and writeFile choose differently.)
Had proposed earlier to go consistently with `perm`, but on balance devs
prefer to go with `mode`.
There's a lot of variation in doc comments and internal code about
whether the first parameter to file system calls is `path` or `name` or
`filename`. For consistency, have made it always be `path`.
* refactor: preliminary cleanup of Deno.runTests()
* Change time measurement to use new Date() instead of
performance.now(). Because there is no guarantee that tests are
run with "--allow-hr" using new Date() guarantees higher
precision of 1ms instead of 2ms.
* Support String type filter in "skip" and "only".
* Split "exitOnFail" into "exitOnFail" and "failFast".
Former tells if "runTests()" should exit with code 1 on test
failure, while latter tells if "runTests()" should stop
running tests on first failure.
* Use "defer" to wait for unhandled promise rejection - this bit
is funky and doesn't seem right, but for now it's just a rewrite
from using "setTimeout". Intended to be fixed in later commits.
* Remove global "__DENO_TEST_REGISTRY", don't expose list of
registered tests (to be addressed in follow up commits)
* Remove arbitrary slow test threshold; use uniform coloring
instead
- Cleanup "tsCompilerOnMessage" by factoring out separate methods for each
request type:
* "compile"
* "runtimeCompile"
* "runtimeTranspile"
- Simplify control flow of compiler workers by a) no longer calling "close()" in worker runtime after a
single message; b) explicitly shutting down worker from host after a single message
Co-authored-by: Ryan Dahl <ry@tinyclouds.org>
Rewrite "testPerm" helper function used for testing of internal
runtime code. It's been renamed to "unitTest" and provides API that
is extensible in the future by accepting optional "UnitTestOptions"
argument. "test" helper was also removed and replaced by
overloaded version of "unitTest" that takes only function argument.
"UnitTestOptions" currently supports "perms" and "skip"
options, where former works exactly as first argument to "testPerm"
did, while the latter allows to conditionally skip tests.
* add "assertOps" test assertion which makes sure test case
is not "leaking" ops - ie. after test finishes there are no
pending async ops
* apply "assertOps" to all tests in "cli/js/"
* fix numerous tests leaking ops
* document problem with edge case in "clearInterval"
and "clearTimeout" implementation where they
may leak async ops
* move "cli/js/worker_test.ts" to "cli/tests/worker_test.ts" and
run as integration test; workers leak ops because of missing
"terminate" implementation
Fixes #4602
We turned off `allowJs` by default, to keep the compiler from grabbing
a bunch of files that it wouldn't actually do anything useful with. On
the other hand, this caused problems with bundles, where the compiler
needs to gather all the dependencies, including JavaScript ones. This
fixes this so that when we are bundling, we analyse JavaScript imports
in the compiler.
* Rename MkdirOption interface to MkdirOptions
It was hard to remember which Options interfaces were spelled in the
singular and which in the plural (and anyway this one contained two
options).
Also added MkdirOptions to cli/js/deno.ts. All the analogous interfaces
were exported there.
* Rename RemoveOption interface to RemoveOptions
This was the last remaining Option interface spelled in the singular.
Easier to remember if they're all Option**s**; plus we may want to add extra
options here later.
Rewrite "normalize_path()" to remove all intermediate components from the path, ie. "./" and "../". It's very similar in functionality to fs::canonicalize(), however "normalize_path() doesn't resolve symlinks.
Previously, bundles always utilised top level await, even if the bundled
modules didn't require top level await. Now, analysis of the bundle is
done and if none of the bundled modules are asynchronously executed,
then the bundle as a whole will be synchronously executed.
Fixes #4055
Fixes #4123
- Added `ServerRequest.finalize()`: consuming all unread body stream and trailers.
- This is cleanup method for reading next request from same keep-alive connection.
- Needed when handler didn't consume all body and trailers even after responding.
- refactor: `ServerRequest._bodyStream()`, `ServerRequestBody` are removed.
- Now using `bodyReader()` and `chunkedBodyReader()` instead.
- fix: Trailers should only be read `transfer-encoding` is `chunked` and `trailer` header is set and its value is valid.
- fix: use `Headers.append()` on reading trailers.
- fix: delete `trailer` field from headers after reading trailers.
- reorg: Several functions related to IO are moved into `http/io.ts`
This PR introduces the mutex guard for the test cases which depends on the
permission prompt mocking utility. permission_request test cases depend on
the mocked (dummy) value of the permission_prompt result. The value is stored
at static STUB_PROMPT_VALUE: AtomicBool and these test cases share this
value. So we should lock at the start of these test cases.
Before this change cargo test permission failed 6 times out of 20. After this
change, 0 times out of 20 (on my mac).
To better reflect changes in error types in JS from #3662 this PR changes
default error type used in ops from "ErrBox" to "OpError".
"OpError" is a type that can be sent over to JSON; it has all
information needed to construct error in JavaScript. That
made "GetErrorKind" trait useless and so it was removed altogether.
To provide compatibility with previous use of "ErrBox" an implementation of
"From<ErrBox> for OpError" was added, however, it is an escape hatch and
ops implementors should strive to use "OpError" directly.
This PR fixes an issue where we recursively analysed imports on plain JS files
in the compiler irrespective of "checkJs" being true. This caused problems
where when analysing the imports of those files, we would mistake some
import like structures (AMD/CommonJS) as dependencies and try to resolve
the "modules" even though the compiler would not actually look at those files.
Fixes #4031
When a bundle contains a single module, we were incorrectly determining
the module name, resulting in a non-functional bundle. This PR corrects
that determination.
Example:
$ python2 -c 'open("\x80\x7F", "w")'
$ deno eval 'Deno.readDirSync(".")'
thread 'main' panicked at 'called `Option::unwrap()` on a `None` value', cli/ops/fs.rs:373:16
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
fatal runtime error: failed to initiate panic, error 5
Aborted (core dumped)
Before this commit they made deno panic, now they are silently skipped.
Not ideal but arguably better than panicking.
No test because what characters are and aren't allowed in filenames is
highly file system-dependent.
Closes #3950
Moves to using a minimal System loader for bundles generated by Deno.
TypeScript in 3.8 will be able to output TLA for modules, and the loader
is written to take advantage of that as soon as we update Deno to TS
3.8.
System also allows us to support `import.meta` and provide more ESM
aligned assignment of exports, as well as there is better handling of
circular imports.
The loader is also very terse versus to try to save overhead.
Also, fixed an issue where abstract classes were not being re-exported.
Fixes #2553
Fixes #3559
Fixes #3751
Fixes #3825
Refs #3301
* rewrite test runner in Rust
* migrate "test" and "runTests" functions from std to "Deno" namespace
* use "Deno.test()" to run internal JS unit tests
* remove std downloads for Deno subcommands
* Use PathBuf for DenoSubcommand::Bundle's out_file
* Use PathBuf for DenoSubcommand::Format's files
* Use PathBuf for DenoSubcommand::Install's dir
* Use PathBuf for read/write whitelists
* establish basic event loop for workers
* make "self.close()" inside worker
* remove "runWorkerMessageLoop() - instead manually call global function
in Rust when message arrives. This is done in preparation for structured clone
* refactor "WorkerChannel" and use distinct structs for internal
and external channels; "WorkerChannelsInternal" and "WorkerHandle"
* move "State.worker_channels_internal" to "Worker.internal_channels"
* add "WorkerEvent" enum for child->host communication;
currently "Message(Buf)" and "Error(ErrBox)" variants are supported
* add tests for nested workers
* add tests for worker throwing error on startup
In denoland/deno#2335 a conditional was added to make sure
toAsyncIterator didn't skip chunks because the reader returned data and
EOF in a single call, fixing #2330.
Later, in denoland/deno#2591, the `Reader` interface changed to
`Promise<number | EOF>`. Since the reader no longer returns data and EOF
in a single call, this conditional is not necessary. We can just return
`{ done: true }` when we get `EOF`.
Co-authored-by: Arun Srinivasan <rulfzid@gmail.com>
Co-authored-by: Arun Srinivasan <rulfzid@gmail.com>
- Exports diagnostic items from `diagnostics.ts` which are missing at
runtime.
- Returns an array of diagnostics, instead of an object with a property
of `items`. This is because of the way Rust deals with certain
structures, and shouldn't be exposed in the APIs.
This change simplifies how we execute V8. Previously V8 Isolates jumped
around threads every time they were woken up. This was overly complex and
potentially hurting performance in a myriad ways. Now isolates run on
their own dedicated thread and never move.
- blocking_json spawns a thread and does not use a thread pool
- op_host_poll_worker and op_host_resume_worker are non-operational
- removes Worker::get_message and Worker::post_message
- ThreadSafeState::workers table contains WorkerChannel entries instead
of actual Worker instances.
- MainWorker and CompilerWorker are no longer Futures.
- The multi-threaded version of deno_core_http_bench was removed.
- AyncOps no longer need to be Send + Sync
This PR is very large and several tests were disabled to speed
integration:
- installer_test_local_module_run
- installer_test_remote_module_run
- _015_duplicate_parallel_import
- _026_workers
For some reason, the unit tests for Deno.remove() were not being imported to
unit_tests.ts and, consequently, not being executed. Thus, I imported them,
refactored some existent ones and wrote new ones for the symlink removal case.
Since the creation of a symlink is not implemented for Windows yet, assertions
that consider this state were added when the tests are executed in this OS.
This flag was added to evaluate performance relative to tokio's threaded
runtime. Although it's faster in the HTTP benchmark, it's clear the runtime
is not the only perf problem.
Removing this flag will simplify further refactors, in particular
adopting the #[tokio::main] macro. This will be done in a follow up.
Ultimately we expect to move to the current thread runtime with Isolates
pinned to specific threads, but that will be a much larger refactor. The
--current-thread just complicates that effort.
Before:
```
▶ target/debug/deno https://deno.land/std/examples/echo_server.ts
error: Uncaught PermissionDenied: run again with the --allow-net flag
► $deno$/dispatch_json.ts:40:11
at DenoError ($deno$/errors.ts:20:5)
at unwrapResponse ($deno$/dispatch_json.ts:40:11)
at sendSync ($deno$/dispatch_json.ts:67:10)
at listen ($deno$/net.ts:170:15)
at https://deno.land/std/examples/echo_server.ts:4:23
```
```
▶ target/debug/deno --allow-read=/usr https://deno.land/std/examples/cat.ts /etc/passwd
error: Uncaught PermissionDenied: run again with the --allow-read flag
► $deno$/dispatch_json.ts:40:11
at DenoError ($deno$/errors.ts:20:5)
at unwrapResponse ($deno$/dispatch_json.ts:40:11)
at sendAsync ($deno$/dispatch_json.ts:91:10)
```
After:
```
▶ target/debug/deno https://deno.land/std/examples/echo_server.ts
error: Uncaught PermissionDenied: network access to "0.0.0.0:8080", run again with the --allow-net flag
► $deno$/dispatch_json.ts:40:11
at DenoError ($deno$/errors.ts:20:5)
at unwrapResponse ($deno$/dispatch_json.ts:40:11)
at sendSync ($deno$/dispatch_json.ts:67:10)
at listen ($deno$/net.ts:170:15)
at https://deno.land/std/examples/echo_server.ts:4:23
```
```
▶ target/debug/deno --allow-read=/usr https://deno.land/std/examples/cat.ts /etc/passwd
error: Uncaught PermissionDenied: read access to "/etc/passwd", run again with the --allow-read flag
► $deno$/dispatch_json.ts:40:11
at DenoError ($deno$/errors.ts:20:5)
at unwrapResponse ($deno$/dispatch_json.ts:40:11)
at sendAsync ($deno$/dispatch_json.ts:91:10)
```
* move is_dyn_import argument from Loader::resolve to Loader::load - it was always kind of strange that resolve() checks permissions.
* change argument type from &str to &ModuleSpecifier where applicable
