In the default values below, a value in the form `$XYZ` refers to an environment variable. (However, see `environment-to-ini`.) Values in the form _`XxYyZz`_ refer to values listed as part of the default configuration. These notation forms will not work in your own `app.ini` file and are only listed here as documentation.
These values are environment-dependent but form the basis of a lot of values. They will be
reported as part of the default configuration when running `forgejo --help` or on start-up. The order they are emitted there is slightly different but we will list them here in the order they are set-up.
- _`AppPath`_: This is the absolute path of the running forgejo binary.
- _`AppWorkPath`_: This refers to "working path" of the `forgejo` binary. It is determined by using the first set thing in the following hierarchy:
- The `--work-path` flag passed to the binary
- The environment variable `$FORGEJO_WORK_DIR`
- A built-in value set at build time (see building from source)
- Otherwise it defaults to the directory of the _`AppPath`_
-`DETECTED_CHARSETS_ORDER`: **UTF-8, UTF-16BE, UTF-16LE, UTF-32BE, UTF-32LE, ISO-8859, windows-1252, ISO-8859, windows-1250, ISO-8859, ISO-8859, ISO-8859, windows-1253, ISO-8859, windows-1255, ISO-8859, windows-1251, windows-1256, KOI8-R, ISO-8859, windows-1254, Shift_JIS, GB18030, EUC-JP, EUC-KR, Big5, ISO-2022, ISO-2022, ISO-2022, IBM424_rtl, IBM424_ltr, IBM420_rtl, IBM420_ltr**: Tie-break order of detected charsets - if the detected charsets have equal confidence, charsets earlier in the list will be chosen in preference to those later. Adding `defaults` will place the unnamed charsets at that point.
-`ANSI_CHARSET`: **\<empty\>**: Default ANSI charset to override non-UTF-8 charsets to.
-`FORCE_PRIVATE`: **false**: Force every new repository to be private.
-`DEFAULT_PRIVATE`: **last**: Default private when creating a new repository.
-`DISABLED_REPO_UNITS`: **_empty_**: Comma separated list of globally disabled repo units. Allowed values: \[repo.issues, repo.ext_issues, repo.pulls, repo.wiki, repo.ext_wiki, repo.projects\]
-`DEFAULT_REPO_UNITS`: **repo.code,repo.releases,repo.issues,repo.pulls,repo.wiki,repo.projects,repo.packages**: Comma separated list of default new repo units. Allowed values: \[repo.code, repo.releases, repo.issues, repo.pulls, repo.wiki, repo.projects\]. Note: Code and Releases can currently not be deactivated. If you specify default repo units you should still list them for future compatibility. External wiki and issue tracker can't be enabled by default as it requires additional settings. Disabled repo units will not be added to new repositories regardless if it is in the default list.
-`DEFAULT_FORK_REPO_UNITS`: **repo.code,repo.pulls**: Comma separated list of default forked repo units. The set of allowed values and rules is the same as `DEFAULT_REPO_UNITS`.
-`PREFIX_ARCHIVE_FILES`: **true**: Prefix archive files by placing them in a directory named after the repository.
-`DEFAULT_BRANCH`: **main**: Default branch name of all repositories.
-`ALLOW_ADOPTION_OF_UNADOPTED_REPOSITORIES`: **false**: Allow non-admin users to adopt unadopted repositories
-`ALLOW_DELETION_OF_UNADOPTED_REPOSITORIES`: **false**: Allow non-admin users to delete unadopted repositories
-`DISABLE_DOWNLOAD_SOURCE_ARCHIVES`: **false**: Don't allow download source archive files from UI
-`ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT`: **true**: Allow fork repositories without maximum number limit
### Repository - Editor (`repository.editor`)
-`LINE_WRAP_EXTENSIONS`: **.txt,.md,.markdown,.mdown,.mkd,**: List of file extensions for which lines should be wrapped in the Monaco editor. Separate extensions with a comma. To line wrap files without an extension, just put a comma
-`PREVIEWABLE_FILE_MODES`: **markdown**: Valid file modes that have a preview API associated with them, such as `api/v1/markdown`. Separate the values by commas. The preview tab in edit mode won't be displayed if the file extension doesn't match.
-`DEFAULT_MERGE_STYLE`: **merge**: Set default merge style for repository creating, valid options: `merge`, `rebase`, `rebase-merge`, `squash`
-`DEFAULT_MERGE_MESSAGE_COMMITS_LIMIT`: **50**: In the default merge message for squash commits include at most this many commits. Set to `-1` to include all commits
-`DEFAULT_MERGE_MESSAGE_SIZE`: **5120**: In the default merge message for squash commits limit the size of the commit messages. Set to `-1` to have no limit. Only used if `POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES` is `true`.
-`DEFAULT_MERGE_MESSAGE_ALL_AUTHORS`: **false**: In the default merge message for squash commits walk all commits to include all authors in the Co-authored-by otherwise just use those in the limited list
-`DEFAULT_MERGE_MESSAGE_MAX_APPROVERS`: **10**: In default merge messages limit the number of approvers listed as `Reviewed-by:`. Set to `-1` to include all.
-`DEFAULT_MERGE_MESSAGE_OFFICIAL_APPROVERS_ONLY`: **true**: In default merge messages only include approvers who are officially allowed to review.
-`POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES`: **false**: In default squash-merge messages include the commit message of all commits comprising the pull request.
-`ADD_CO_COMMITTER_TRAILERS`: **true**: Add co-authored-by and co-committed-by trailers to merge commit messages if committer does not match author.
-`TEST_CONFLICTING_PATCHES_WITH_GIT_APPLY`: **false**: PR patches are tested using a three-way merge method to discover if there are conflicts. If this setting is set to **true**, conflicting patches will be retested using `git apply` - This was the previous behaviour in 1.18 (and earlier) but is somewhat inefficient. Please report if you find that this setting is required.
### Repository - Issue (`repository.issue`)
-`LOCK_REASONS`: **Too heated,Off-topic,Resolved,Spam**: A list of reasons why a Pull Request or Issue can be locked
### Repository - Upload (`repository.upload`)
-`ENABLED`: **true**: Whether repository file uploads are enabled
-`TEMP_PATH`: **data/tmp/uploads**: Path for uploads (content gets deleted on Forgejo restart)
-`ALLOWED_TYPES`: **\<empty\>**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
-`FILE_MAX_SIZE`: **3**: Max size of each file in megabytes.
-`MAX_FILES`: **5**: Max number of files per upload
### Repository - Release (`repository.release`)
-`ALLOWED_TYPES`: **\<empty\>**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
-`DEFAULT_PAGING_NUM`: **10**: The default paging number of releases user interface
- For settings related to file attachments on releases, see the `attachment` section.
### Repository - Signing (`repository.signing`)
-`SIGNING_KEY`: **default**: \[none, KEYID, default \]: Key to sign with.
-`SIGNING_NAME`&`SIGNING_EMAIL`: if a KEYID is provided as the `SIGNING_KEY`, use these as the Name and Email address of the signer. These should match publicized name and email address for the key.
-`approved`: Only sign approved merges to a protected branch.
-`basesigned`: Only sign if the parent commit in the base repo is signed.
-`headsigned`: Only sign if the head commit in the head branch is signed.
-`commitssigned`: Only sign if all the commits in the head branch to the merge point are signed.
## Repository - Local (`repository.local`)
-`LOCAL_COPY_PATH`: **tmp/local-repo**: Path for temporary local repository copies. Defaults to `tmp/local-repo` (content gets deleted on Forgejo restart)
Configuration for set the expected MIME type based on file extensions of downloadable files. Configuration presents in key-value pairs and file extensions starts with leading `.`.
The following configuration set `Content-Type: application/vnd.android.package-archive` header when downloading files with `.apk` file extension.
```ini
.apk=application/vnd.android.package-archive
```
## CORS (`cors`)
-`ENABLED`: **false**: enable cors headers (disabled by default)
-`SCHEME`: **http**: scheme of allowed requests
-`ALLOW_DOMAIN`: **\***: list of requesting domains that are allowed
-`ALLOW_SUBDOMAIN`: **false**: allow subdomains of headers listed above to request
-`METHODS`: **GET,HEAD,POST,PUT,PATCH,DELETE,OPTIONS**: list of methods allowed to request
-`MAX_AGE`: **10m**: max time to cache response
-`ALLOW_CREDENTIALS`: **false**: allow request with credentials
-`HEADERS`: **Content-Type,User-Agent**: additional headers that are permitted in requests
-`X_FRAME_OPTIONS`: **SAMEORIGIN**: Set the `X-Frame-Options` header value.
## UI (`ui`)
-`EXPLORE_PAGING_NUM`: **20**: Number of repositories that are shown in one explore page.
-`ISSUE_PAGING_NUM`: **20**: Number of issues that are shown in one page (for all pages that list issues, milestones, projects).
-`MEMBERS_PAGING_NUM`: **20**: Number of members that are shown in organization members.
-`FEED_MAX_COMMIT_NUM`: **5**: Number of maximum commits shown in one activity feed.
-`FEED_PAGING_NUM`: **20**: Number of items that are displayed in home feed.
-`SITEMAP_PAGING_NUM`: **20**: Number of items that are displayed in a single subsitemap.
-`GRAPH_MAX_COMMIT_NUM`: **100**: Number of maximum commits shown in the commit graph.
-`CODE_COMMENT_LINES`: **4**: Number of line of codes shown for a code comment.
-`DEFAULT_THEME`: **forgejo-auto**: \[forgejo-auto, forgejo-light, forgejo-dark, auto, gitea, arc-green\]: Set the default theme for the Forgejo install.
-`SHOW_USER_EMAIL`: **true**: Whether the email of the user should be shown in the Explore Users page.
-`THEME_COLOR_META_TAG`: **#6cc644**: Value of `theme-color` meta tag, used by Android >= 5.0. An invalid color like "none" or "disable" will have the default style. More info: https://developers.google.com/web/updates/2014/11/Support-for-theme-color-in-Chrome-39-for-Android
-`DEFAULT_SHOW_FULL_NAME`: **false**: Whether the full name of the users should be shown where possible. If the full name isn't set, the username will be used.
-`SEARCH_REPO_DESCRIPTION`: **true**: Whether to search within description at repository search on explore page.
-`USE_SERVICE_WORKER`: **false**: Whether to enable a Service Worker to cache frontend assets.
### UI - Admin (`ui.admin`)
-`USER_PAGING_NUM`: **50**: Number of users that are shown in one page.
-`REPO_PAGING_NUM`: **50**: Number of repos that are shown in one page.
-`NOTICE_PAGING_NUM`: **25**: Number of notices that are shown in one page.
-`ORG_PAGING_NUM`: **50**: Number of organizations that are shown in one page.
### UI - User (`ui.user`)
-`REPO_PAGING_NUM`: **15**: Number of repos that are shown in one page.
### UI - Metadata (`ui.meta`)
-`AUTHOR`: **Forgejo - Beyond coding. We forge.**: Author meta tag of the homepage.
-`DESCRIPTION`: **Forgejo is a self-hosted lightweight software forge. Easy to install and low maintenance, it just does the job.**: Description meta tag of the homepage.
-`KEYWORDS`: **git,forge,forgejo**: Keywords meta tag of the homepage.
### UI - Notification (`ui.notification`)
-`MIN_TIMEOUT`: **10s**: These options control how often notification endpoint is polled to update the notification count. On page load the notification count will be checked after `MIN_TIMEOUT`. The timeout will increase to `MAX_TIMEOUT` by `TIMEOUT_STEP` if the notification count is unchanged. Set MIN_TIMEOUT to -1 to turn off.
-`MAX_TIMEOUT`: **60s**.
-`TIMEOUT_STEP`: **10s**.
-`EVENT_SOURCE_UPDATE_TIME`: **10s**: This setting determines how often the database is queried to update notification counts. If the browser client supports `EventSource` and `SharedWorker`, a `SharedWorker` will be used in preference to polling notification endpoint. Set to **-1** to disable the `EventSource`.
-`ENABLE_RENDER`: **true**: Whether to render SVG files as images. If SVG rendering is disabled, SVG files are displayed as text and cannot be embedded in markdown files as images.
- If `PROTOCOL` is set to `http+unix` or `fcgi+unix`, this should be the name of the Unix socket file to use. Relative paths will be made absolute against the _`AppWorkPath`_.
-`HTTP_PORT`: **3000**: HTTP listen port.
- If `PROTOCOL` is set to `fcgi`, Forgejo will listen for FastCGI requests on TCP socket
-`PER_WRITE_PER_KB_TIMEOUT`: **10s**: Timeout per Kb written to connections.
-`DISABLE_SSH`: **false**: Disable SSH feature when it's not available.
-`START_SSH_SERVER`: **false**: When enabled, use the built-in SSH server.
-`SSH_SERVER_USE_PROXY_PROTOCOL`: **false**: Expect PROXY protocol header on connections to the built-in SSH Server.
-`BUILTIN_SSH_SERVER_USER`: **%(RUN_USER)s**: Username to use for the built-in SSH Server.
-`SSH_USER`: **%(BUILTIN_SSH_SERVER_USER)s**: SSH username displayed in clone URLs. This is only for people who configure the SSH server themselves; in most cases, you want to leave this blank and modify the `BUILTIN_SSH_SERVER_USER`.
-`SSH_DOMAIN`: **%(DOMAIN)s**: Domain name of this server, used for displayed clone URL.
-`SSH_PORT`: **22**: SSH port displayed in clone URL.
-`SSH_LISTEN_HOST`: **0.0.0.0**: Listen address for the built-in SSH server.
-`SSH_ROOT_PATH`: **~/.ssh**: Root path of SSH directory.
-`SSH_CREATE_AUTHORIZED_KEYS_FILE`: **true**: Forgejo will create a authorized_keys file by default when it is not using the internal ssh server. If you intend to use the AuthorizedKeysCommand functionality then you should turn this off.
-`SSH_AUTHORIZED_KEYS_BACKUP`: **true**: Enable SSH Authorized Key Backup when rewriting all keys, default is true.
-`SSH_TRUSTED_USER_CA_KEYS`: **\<empty\>**: Specifies the public keys of certificate authorities that are trusted to sign user certificates for authentication. Multiple keys should be comma separated. E.g.`ssh-<algorithm><key>` or `ssh-<algorithm> <key1>, ssh-<algorithm> <key2>`. For more information see `TrustedUserCAKeys` in the sshd config man pages. When empty no file will be created and `SSH_AUTHORIZED_PRINCIPALS_ALLOW` will default to `off`.
-`SSH_TRUSTED_USER_CA_KEYS_FILENAME`: **`RUN_USER`/.ssh/gitea-trusted-user-ca-keys.pem**: Absolute path of the `TrustedUserCaKeys` file Forgejo will manage. If you're running your own ssh server and you want to use the Forgejo managed file you'll also need to modify your sshd_config to point to this file. The official docker image will automatically work without further configuration.
-`SSH_AUTHORIZED_PRINCIPALS_ALLOW`: **off** or **username, email**: \[off, username, email, anything\]: Specify the principals values that users are allowed to use as principal. When set to `anything` no checks are done on the principal string. When set to `off` authorized principal are not allowed to be set.
-`SSH_CREATE_AUTHORIZED_PRINCIPALS_FILE`: **false/true**: Forgejo will create a authorized_principals file by default when it is not using the internal ssh server and `SSH_AUTHORIZED_PRINCIPALS_ALLOW` is not `off`.
-`SSH_AUTHORIZED_PRINCIPALS_BACKUP`: **false/true**: Enable SSH Authorized Principals Backup when rewriting all keys, default is true if `SSH_AUTHORIZED_PRINCIPALS_ALLOW` is not `off`.
-`SSH_AUTHORIZED_KEYS_COMMAND_TEMPLATE`: **{{.AppPath}} --config={{.CustomConf}} serv key-{{.Key.ID}}**: Set the template for the command to passed on authorized keys. Possible keys are: AppPath, AppWorkPath, CustomConf, CustomPath, Key - where Key is a `models/asymkey.PublicKey` and the others are strings which are shellquoted.
-`SSH_SERVER_CIPHERS`: **chacha20-poly1305@openssh.com, aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, aes256-gcm@openssh.com**: For the built-in SSH server, choose the ciphers to support for SSH connections, for system SSH this setting has no effect.
-`SSH_SERVER_KEY_EXCHANGES`: **curve25519-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group14-sha1**: For the built-in SSH server, choose the key exchange algorithms to support for SSH connections, for system SSH this setting has no effect.
-`SSH_SERVER_MACS`: **hmac-sha2-256-etm@openssh.com, hmac-sha2-256, hmac-sha1**: For the built-in SSH server, choose the MACs to support for SSH connections, for system SSH this setting has no effect
-`SSH_SERVER_HOST_KEYS`: **ssh/gitea.rsa, ssh/gogs.rsa**: For the built-in SSH server, choose the keypairs to offer as the host key. The private key should be at `SSH_SERVER_HOST_KEY` and the public `SSH_SERVER_HOST_KEY.pub`. Relative paths are made absolute relative to the `APP_DATA_PATH`. If no key exists a 4096 bit RSA key will be created for you.
-`SSH_KEY_TEST_PATH`: **/tmp**: Directory to create temporary files in when testing public keys using ssh-keygen, default is the system temporary directory.
-`SSH_KEYGEN_PATH`: **ssh-keygen**: Path to ssh-keygen, default is 'ssh-keygen' which means the shell is responsible for finding out which one to call.
-`SSH_EXPOSE_ANONYMOUS`: **false**: Enable exposure of SSH clone URL to anonymous visitors, default is false.
-`SSH_PER_WRITE_TIMEOUT`: **30s**: Timeout for any write to the SSH connections. (Set to
-1 to disable all timeouts.)
-`SSH_PER_WRITE_PER_KB_TIMEOUT`: **10s**: Timeout per Kb written to SSH connections.
-`MINIMUM_KEY_SIZE_CHECK`: **true**: Indicate whether to check minimum key size with corresponding type.
-`OFFLINE_MODE`: **false**: Disables use of CDN for static files and Gravatar for profile pictures.
-`CERT_FILE`: **https/cert.pem**: Cert file path used for HTTPS. When chaining, the server certificate must come first, then intermediate CA certificates (if any). This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
-`KEY_FILE`: **https/key.pem**: Key file path used for HTTPS. This is ignored if `ENABLE_ACME=true`. Paths are relative to `CUSTOM_PATH`.
-`STATIC_ROOT_PATH`: **_`StaticRootPath`_**: Upper level of template and static files path.
-`APP_DATA_PATH`: **data** (**/data/gitea** on docker): Default path for application data. Relative paths will be made absolute against _`AppWorkPath`_.
-`STATIC_CACHE_TIME`: **6h**: Web browser cache time for static resources on `custom/`, `public/` and all uploaded avatars. Note that this cache is disabled when `RUN_MODE` is "dev".
-`ENABLE_PPROF`: **false**: Application profiling (memory and cpu). For "web" command it listens on `localhost:6060`. For "serv" command it dumps to disk at `PPROF_DATA_PATH` as `(cpuprofile|memprofile)_<username>_<temporary id>`
-`PPROF_DATA_PATH`: **_`AppWorkPath`_/data/tmp/pprof**: `PPROF_DATA_PATH`, use an absolute path when you start Forgejo as service
-`LANDING_PAGE`: **home**: Landing page for unauthenticated users \[home, explore, organizations, login, **custom**\]. Where custom would instead be any URL such as "/org/repo" or even `https://anotherwebsite.com`
-`LFS_CONTENT_PATH`: **%(APP_DATA_PATH)s/lfs**: Default LFS content path. (if it is on local storage.) **DEPRECATED** use settings in `[lfs]`.
-`LFS_JWT_SECRET`: **\<empty\>**: LFS authentication secret, change this a unique string.
-`LFS_HTTP_AUTH_EXPIRY`: **20m**: LFS authentication validity period in time.Duration, pushes taking longer than this may fail.
-`LFS_MAX_FILE_SIZE`: **0**: Maximum allowed LFS file size in bytes (Set to 0 for no limit).
-`LFS_LOCKS_PAGING_NUM`: **50**: Maximum number of LFS Locks returned per page.
-`REDIRECT_OTHER_PORT`: **false**: If true and `PROTOCOL` is https, allows redirecting http requests on `PORT_TO_REDIRECT` to the https port Forgejo listens on.
-`REDIRECTOR_USE_PROXY_PROTOCOL`: **%(USE_PROXY_PROTOCOL)s**: expect PROXY protocol header on connections to https redirector.
-`PORT_TO_REDIRECT`: **80**: Port for the http redirection service to listen on. Used when `REDIRECT_OTHER_PORT` is true.
-`SSL_MIN_VERSION`: **TLSv1.2**: Set the minimum version of ssl support.
-`SSL_MAX_VERSION`: **\<empty\>**: Set the maximum version of ssl support.
-`SSL_CURVE_PREFERENCES`: **X25519,P256**: Set the preferred curves,
-`SSL_CIPHER_SUITES`: **ecdhe_ecdsa_with_aes_256_gcm_sha384,ecdhe_rsa_with_aes_256_gcm_sha384,ecdhe_ecdsa_with_aes_128_gcm_sha256,ecdhe_rsa_with_aes_128_gcm_sha256,ecdhe_ecdsa_with_chacha20_poly1305,ecdhe_rsa_with_chacha20_poly1305**: Set the preferred cipher suites.
- If there is no hardware support for AES suites, by default the ChaCha suites will be preferred over the AES suites.
- supported suites as of Go 1.18 are:
- TLS 1.0 - 1.2 cipher suites
- "rsa_with_rc4_128_sha"
- "rsa_with_3des_ede_cbc_sha"
- "rsa_with_aes_128_cbc_sha"
- "rsa_with_aes_256_cbc_sha"
- "rsa_with_aes_128_cbc_sha256"
- "rsa_with_aes_128_gcm_sha256"
- "rsa_with_aes_256_gcm_sha384"
- "ecdhe_ecdsa_with_rc4_128_sha"
- "ecdhe_ecdsa_with_aes_128_cbc_sha"
- "ecdhe_ecdsa_with_aes_256_cbc_sha"
- "ecdhe_rsa_with_rc4_128_sha"
- "ecdhe_rsa_with_3des_ede_cbc_sha"
- "ecdhe_rsa_with_aes_128_cbc_sha"
- "ecdhe_rsa_with_aes_256_cbc_sha"
- "ecdhe_ecdsa_with_aes_128_cbc_sha256"
- "ecdhe_rsa_with_aes_128_cbc_sha256"
- "ecdhe_rsa_with_aes_128_gcm_sha256"
- "ecdhe_ecdsa_with_aes_128_gcm_sha256"
- "ecdhe_rsa_with_aes_256_gcm_sha384"
- "ecdhe_ecdsa_with_aes_256_gcm_sha384"
- "ecdhe_rsa_with_chacha20_poly1305_sha256"
- "ecdhe_ecdsa_with_chacha20_poly1305_sha256"
- TLS 1.3 cipher suites
- "aes_128_gcm_sha256"
- "aes_256_gcm_sha384"
- "chacha20_poly1305_sha256"
- Aliased names
- "ecdhe_rsa_with_chacha20_poly1305" is an alias for "ecdhe_rsa_with_chacha20_poly1305_sha256"
- "ecdhe_ecdsa_with_chacha20_poly1305" is alias for "ecdhe_ecdsa_with_chacha20_poly1305_sha256"
-`ENABLE_ACME`: **false**: Flag to enable automatic certificate management via an ACME capable Certificate Authority (CA) server (default: Lets Encrypt). If enabled, `CERT_FILE` and `KEY_FILE` are ignored, and the CA must resolve `DOMAIN` to this forgejo server. Ensure that DNS records are set and either port `80` or port `443` are accessible by the CA server (the public internet by default), and redirected to the appropriate ports `PORT_TO_REDIRECT` or `HTTP_PORT` respectively.
-`ACME_URL`: **\<empty\>**: The CA's ACME directory URL, e.g. for a self-hosted [smallstep CA server](https://github.com/smallstep/certificates), it can look like `https://ca.example.com/acme/acme/directory`. If left empty, it defaults to using Let's Encerypt's production CA (check `LETSENCRYPT_ACCEPTTOS` as well).
-`ACME_ACCEPTTOS`: **false**: This is an explicit check that you accept the terms of service of the ACME provider. The default is Lets Encrypt [terms of service](https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf).
-`ACME_DIRECTORY`: **https**: Directory that the certificate manager will use to cache information such as certs and private keys.
-`ACME_EMAIL`: **\<empty\>**: Email used for the ACME registration. Usually it is to notify about problems with issued certificates.
-`ACME_CA_ROOT`: **\<empty\>**: The CA's root certificate. If left empty, it defaults to using the system's trust chain.
-`ALLOW_GRACEFUL_RESTARTS`: **true**: Perform a graceful restart on SIGHUP
-`GRACEFUL_HAMMER_TIME`: **60s**: After a restart the parent process will stop accepting new connections and will allow requests to finish before stopping. Shutdown will be forced if it takes longer than this time.
-`STARTUP_TIMEOUT`: **0**: Shutsdown the server if startup takes longer than the provided time. On Windows setting this sends a waithint to the SVC host to tell the SVC host startup may take some time. Please note startup is determined by the opening of the listeners - HTTP/HTTPS/SSH. Indexers may take longer to startup and can have their own timeouts.
## Database (`database`)
-`DB_TYPE`: **mysql**: The database type in use \[mysql, postgres, mssql, sqlite3\].
-`HOST`: **127.0.0.1:3306**: Database host address and port or absolute path for unix socket \[mysql, postgres\] (ex: /var/run/mysqld/mysqld.sock).
-`NAME`: **forgejo**: Database name.
-`USER`: **root**: Database username.
-`PASSWD`: **\<empty\>**: Database user password. Use \`your password\` or """your password""" for quoting if you use special characters in the password.
-`SCHEMA`: **\<empty\>**: For PostgreSQL only, schema to use if different from "public". The schema must exist beforehand,
the user must have creation privileges on it, and the user search path must be set to the look into the schema first
(e.g. `ALTER USER user SET SEARCH_PATH = schema_name,"$user",public;`).
-`SSL_MODE`: **disable**: SSL/TLS encryption mode for connecting to the database. This option is only applied for PostgreSQL and MySQL.
- Valid values for MySQL:
-`true`: Enable TLS with verification of the database server certificate against its root certificate. When selecting this option make sure that the root certificate required to validate the database server certificate (e.g. the CA certificate) is on the system certificate store of both the database and Forgejo servers. See your system documentation for instructions on how to add a CA certificate to the certificate store.
-`false`: Disable TLS.
-`disable`: Alias for `false`, for compatibility with PostgreSQL.
-`skip-verify`: Enable TLS without database server certificate verification. Use this option if you have self-signed or invalid certificate on the database server.
-`prefer`: Enable TLS with fallback to non-TLS connection.
- Valid values for PostgreSQL:
-`disable`: Disable TLS.
-`require`: Enable TLS without any verifications.
-`verify-ca`: Enable TLS with verification of the database server certificate against its root certificate.
-`verify-full`: Enable TLS and verify the database server name matches the given certificate in either the `Common Name` or `Subject Alternative Name` fields.
-`SQLITE_TIMEOUT`: **500**: Query timeout for SQLite3 only.
-`SQLITE_JOURNAL_MODE`: **""**: Change journal mode for SQlite3. Can be used to enable [WAL mode](https://www.sqlite.org/wal.html) when high load causes write congestion. See [SQlite3 docs](https://www.sqlite.org/pragma.html#pragma_journal_mode) for possible values. Defaults to the default for the database file, often DELETE.
-`ITERATE_BUFFER_SIZE`: **50**: Internal buffer size for iterating.
-`CHARSET`: **utf8mb4**: For MySQL only, either "utf8" or "utf8mb4". NOTICE: for "utf8mb4" you must use MySQL InnoDB > 5.6. Forgejo is unable to check this.
-`PATH`: **data/forgejo.db**: For SQLite3 only, the database file path.
-`LOG_SQL`: **true**: Log the executed SQL.
-`DB_RETRIES`: **10**: How many ORM init / DB connect attempts allowed.
-`DB_RETRY_BACKOFF`: **3s**: time.Duration to wait before trying another ORM init / DB connect attempt, if failure occurred.
-`MAX_OPEN_CONNS`**0**: Database maximum open connections - default is 0, meaning there is no limit.
-`MAX_IDLE_CONNS`**2**: Max idle database connections on connection pool, default is 2 - this will be capped to `MAX_OPEN_CONNS`.
-`CONN_MAX_LIFETIME`**0 or 3s**: Sets the maximum amount of time a DB connection may be reused - default is 0, meaning there is no limit (except on MySQL where it is 3s - see #6804ᮟ).
-`ISSUE_INDEXER_CONN_STR`: \*\*\*\*: Issue indexer connection string, available when ISSUE_INDEXER_TYPE is elasticsearch. i.e. http://elastic:changeme@localhost:9200
-`ISSUE_INDEXER_PATH`: **indexers/issues.bleve**: Index file used for issue search; available when ISSUE*INDEXER_TYPE is bleve and elasticsearch. Relative paths will be made absolute against *`AppWorkPath`\_.
- The next 4 configuration values are deprecated and should be set in `queue.issue_indexer` however are kept for backwards compatibility:
-`ISSUE_INDEXER_QUEUE_TYPE`: **levelqueue**: Issue indexer queue, currently supports:`channel`, `levelqueue`, `redis`. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`ISSUE_INDEXER_QUEUE_DIR`: **queues/common**: When `ISSUE_INDEXER_QUEUE_TYPE` is `levelqueue`, this will be the path where the queue will be saved. **DEPRECATED** use settings in `[queue.issue_indexer]`. Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
-`ISSUE_INDEXER_QUEUE_CONN_STR`: **addrs=127.0.0.1:6379 db=0**: When `ISSUE_INDEXER_QUEUE_TYPE` is `redis`, this will store the redis connection string. When `ISSUE_INDEXER_QUEUE_TYPE` is `levelqueue`, this is a directory or additional options of the form `leveldb://path/to/db?option=value&....`, and overrides `ISSUE_INDEXER_QUEUE_DIR`. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`ISSUE_INDEXER_QUEUE_BATCH_NUMBER`: **20**: Batch queue number. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`REPO_INDEXER_ENABLED`: **false**: Enables code search (uses a lot of disk space, about 6 times more than the repository size).
-`REPO_INDEXER_TYPE`: **bleve**: Code search engine type, could be `bleve` or `elasticsearch`.
-`REPO_INDEXER_PATH`: **indexers/repos.bleve**: Index file used for code search.
-`REPO_INDEXER_CONN_STR`: \*\*\*\*: Code indexer connection string, available when `REPO_INDEXER_TYPE` is elasticsearch. i.e. http://elastic:changeme@localhost:9200
-`REPO_INDEXER_NAME`: **gitea_codes**: Code indexer name, available when `REPO_INDEXER_TYPE` is elasticsearch
-`REPO_INDEXER_INCLUDE`: **empty**: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to **include** in the index. Use `**.txt` to match any files with .txt extension. An empty list means include all files.
-`REPO_INDEXER_EXCLUDE`: **empty**: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to **exclude** from the index. Files that match this list will not be indexed, even if they match in `REPO_INDEXER_INCLUDE`.
-`REPO_INDEXER_EXCLUDE_VENDORED`: **true**: Exclude vendored files from index.
-`UPDATE_BUFFER_LEN`: **20**: Buffer length of index request. **DEPRECATED** use settings in `[queue.issue_indexer]`.
-`MAX_FILE_SIZE`: **1048576**: Maximum size in bytes of files to be indexed.
-`STARTUP_TIMEOUT`: **30s**: If the indexer takes longer than this timeout to start - fail. (This timeout will be added to the hammer time above for child processes - as bleve will not start until the previous parent is shutdown.) Set to -1 to never timeout.
## Queue (`queue` and `queue.*`)
Configuration at `[queue]` will set defaults for queues with overrides for individual queues at `[queue.*]`. (However see below.)
-`TYPE`: **persistable-channel**: General queue type, currently support: `persistable-channel` (uses a LevelDB internally), `channel`, `level`, `redis`, `dummy`
-`DATADIR`: **queues/**: Base DataDir for storing persistent and level queues. `DATADIR` for individual queues can be set in `queue.name` sections but will default to `DATADIR/`**`common`**. (Previously each queue would default to `DATADIR/`**`name`**.) Relative paths will be made absolute against `%(APP_DATA_PATH)s`.
-`LENGTH`: **20**: Maximal queue size before channel queues block
-`BATCH_LENGTH`: **20**: Batch data before passing to the handler
-`CONN_STR`: **redis://127.0.0.1:6379/0**: Connection string for the redis queue type. Options can be set using query params. Similarly LevelDB options can also be set using: **leveldb://relative/path?option=value** or **leveldb:///absolute/path?option=value**, and will override `DATADIR`
-`QUEUE_NAME`: **\_queue**: The suffix for default redis and disk queue name. Individual queues will default to **`name`**`QUEUE_NAME` but can be overridden in the specific `queue.name` section.
-`SET_NAME`: **\_unique**: The suffix that will be added to the default redis and disk queue `set` name for unique queues. Individual queues will default to
**`name`**`QUEUE_NAME`_`SET_NAME`_ but can be overridden in the specific `queue.name` section.
-`WRAP_IF_NECESSARY`: **true**: Will wrap queues with a timeoutable queue if the selected queue is not ready to be created - (Only relevant for the level queue.)
-`MAX_ATTEMPTS`: **10**: Maximum number of attempts to create the wrapped queue
-`TIMEOUT`: **GRACEFUL_HAMMER_TIME + 30s**: Timeout the creation of the wrapped queue if it takes longer than this to create.
- Queues by default come with a dynamically scaling worker pool. The following settings configure this:
-`WORKERS`: **0**: Number of initial workers for the queue.
-`MAX_WORKERS`: **10**: Maximum number of worker go-routines for the queue.
-`BLOCK_TIMEOUT`: **1s**: If the queue blocks for this time, boost the number of workers - the `BLOCK_TIMEOUT` will then be doubled before boosting again whilst the boost is ongoing.
-`BOOST_TIMEOUT`: **5m**: Boost workers will timeout after this long.
-`BOOST_WORKERS`: **1**: This many workers will be added to the worker pool if there is a boost.
Forgejo creates the following non-unique queues:
-`code_indexer`
-`issue_indexer`
-`notification-service`
-`task`
-`mail`
-`push_update`
And the following unique queues:
-`repo_stats_update`
-`repo-archive`
-`mirror`
-`pr_patch_checker`
Certain queues have defaults that override the defaults set in `[queue]` (this occurs mostly to support older configuration):
-`[queue.issue_indexer]`
-`TYPE` this will default to `[queue]``TYPE` if it is set but if not it will appropriately convert `[indexer]``ISSUE_INDEXER_QUEUE_TYPE` if that is set.
-`LENGTH` will default to `[indexer]``UPDATE_BUFFER_LEN` if that is set.
-`BATCH_LENGTH` will default to `[indexer]``ISSUE_INDEXER_QUEUE_BATCH_NUMBER` if that is set.
-`DATADIR` will default to `[indexer]``ISSUE_INDEXER_QUEUE_DIR` if that is set.
-`CONN_STR` will default to `[indexer]``ISSUE_INDEXER_QUEUE_CONN_STR` if that is set.
-`[queue.mailer]`
-`LENGTH` will default to **100** or whatever `[mailer]``SEND_BUFFER_LEN` is.
-`[queue.pr_patch_checker]`
-`LENGTH` will default to **1000** or whatever `[repository]``PULL_REQUEST_QUEUE_LENGTH` is.
-`[queue.mirror]`
-`LENGTH` will default to **1000** or whatever `[repository]``MIRROR_QUEUE_LENGTH` is.
## Admin (`admin`)
-`DEFAULT_EMAIL_NOTIFICATIONS`: **enabled**: Default configuration for email notifications for users (user configurable). Options: enabled, onmention, disabled
-`DISABLE_REGULAR_ORG_CREATION`: **false**: Disallow regular (non-admin) users from creating organizations.
## Security (`security`)
-`INSTALL_LOCK`: **false**: Controls access to the installation page. When set to "true", the installation page is not accessible.
-`SECRET_KEY`: **\<random at every install\>**: Global secret key. This key is VERY IMPORTANT, if you lost it, the data encrypted by it (like 2FA secret) can't be decrypted anymore.
-`SECRET_KEY_URI`: **<empty>**: Instead of defining SECRET_KEY, this option can be used to use the key stored in a file (example value: `file:/etc/forgejo/secret_key`). It shouldn't be lost like SECRET_KEY.
-`LOGIN_REMEMBER_DAYS`: **7**: Cookie lifetime, in days.
-`REVERSE_PROXY_TRUSTED_PROXIES`: **127.0.0.0/8,::1/128**: List of IP addresses and networks separated by comma of trusted proxy servers. Use `*` to trust all.
-`DISABLE_GIT_HOOKS`: **true**: Set to `false` to enable users with Git Hook privilege to create custom Git Hooks.
-`DISABLE_WEBHOOKS`: **false**: Set to `true` to disable webhooks feature.
-`ONLY_ALLOW_PUSH_IF_GITEA_ENVIRONMENT_SET`: **true**: Set to `false` to allow local users to push to gitea-repositories without setting up the Forgejo environment. This is not recommended and if you want local users to push to Forgejo repositories you should set the environment appropriately.
-`IMPORT_LOCAL_PATHS`: **false**: Set to `false` to prevent all users (including admin) from importing local path on server.
-`INTERNAL_TOKEN`: **\<random at every install if no uri set\>**: Secret used to validate communication within Forgejo binary.
-`INTERNAL_TOKEN_URI`: **<empty>**: Instead of defining INTERNAL_TOKEN in the configuration, this configuration option can be used to give Forgejo a path to a file that contains the internal token (example value: `file:/etc/forgejo/internal_token`)
-`PASSWORD_HASH_ALGO`: **pbkdf2**: The hash algorithm to use \[argon2, pbkdf2, pbkdf2_v1, pbkdf2_hi, scrypt, bcrypt\], argon2 and scrypt will spend significant amounts of memory.
- Note: The default parameters for `pbkdf2` hashing have changed - the previous settings are available as `pbkdf2_v1` but are not recommended.
- The hash functions may be tuned by using `$` after the algorithm:
- Adjusting the algorithm parameters using this functionality is done at your own risk.
-`CSRF_COOKIE_HTTP_ONLY`: **true**: Set false to allow JavaScript to read CSRF cookie.
-`MIN_PASSWORD_LENGTH`: **6**: Minimum password length for new users.
-`PASSWORD_COMPLEXITY`: **off**: Comma separated list of character classes required to pass minimum complexity. If left empty or no valid values are specified, checking is disabled (off):
-`PASSWORD_CHECK_PWN`: **false**: Check [HaveIBeenPwned](https://haveibeenpwned.com/Passwords) to see if a password has been exposed.
-`SUCCESSFUL_TOKENS_CACHE_SIZE`: **20**: Cache successful token hashes. API tokens are stored in the DB as pbkdf2 hashes however, this means that there is a potentially significant hashing load when there are multiple API operations. This cache will store the successfully hashed tokens in a LRU cache as a balance between performance and security.
## Camo (`camo`)
-`ENABLED`: **false**: Enable media proxy, we support images only at the moment.
-`SERVER_URL`: **<empty>**: URL of camo server, it **is required** if camo is enabled.
-`HMAC_KEY`: **<empty>**: Provide the HMAC key for encoding URLs, it **is required** if camo is enabled.
-`ALLWAYS`: **false**: Set to true to use camo for both HTTP and HTTPS content, otherwise only non-HTTPS URLs are proxied
## OpenID (`openid`)
-`ENABLE_OPENID_SIGNIN`: **false**: Allow authentication in via OpenID.
-`REGISTER_EMAIL_CONFIRM`: _[service]_**REGISTER_EMAIL_CONFIRM**: Set this to enable or disable email confirmation of OAuth2 auto-registration. (Overwrites the REGISTER_EMAIL_CONFIRM setting of the `[service]` section)
-`OPENID_CONNECT_SCOPES`: **\<empty\>**: List of additional openid connect scopes. (`openid` is implicitly added)
-`ENABLE_AUTO_REGISTRATION`: **false**: Automatically create user accounts for new oauth2 users.
-`USERNAME`: **nickname**: The source of the username for new oauth2 accounts:
- userid - use the userid / sub attribute
- nickname - use the nickname attribute
- email - use the username part of the email attribute
-`UPDATE_AVATAR`: **false**: Update avatar if available from oauth2 provider. Update will be performed on each login.
-`ACCOUNT_LINKING`: **login**: How to handle if an account / email already exists:
- disabled - show an error
- login - show an account linking login
- auto - automatically link with the account (Please be aware that this will grant access to an existing account just because the same username or email is provided. You must make sure that this does not cause issues with your authentication providers.)
## Service (`service`)
-`ACTIVE_CODE_LIVE_MINUTES`: **180**: Time limit (min) to confirm account/email registration.
-`RESET_PASSWD_CODE_LIVE_MINUTES`: **180**: Time limit (min) to confirm forgot password reset
-`SHOW_MILESTONES_DASHBOARD_PAGE`: **true** Enable this to show the milestones dashboard page - a view of all the user's milestones
-`AUTO_WATCH_NEW_REPOS`: **true**: Enable this to let all organisation users watch new repos when they are created
-`AUTO_WATCH_ON_CHANGES`: **false**: Enable this to make users watch a repository after their first commit to it
-`DEFAULT_USER_VISIBILITY`: **public**: Set default visibility mode for users, either "public", "limited" or "private".
-`ALLOWED_USER_VISIBILITY_MODES`: **public,limited,private**: Set which visibility modes a user can have
-`DEFAULT_ORG_VISIBILITY`: **public**: Set default visibility mode for organisations, either "public", "limited" or "private".
-`DEFAULT_ORG_MEMBER_VISIBLE`: **false** True will make the membership of the users visible when added to the organisation.
-`ALLOW_ONLY_INTERNAL_REGISTRATION`: **false** Set to true to force registration only via Forgejo.
-`ALLOW_ONLY_EXTERNAL_REGISTRATION`: **false** Set to true to force registration only using third-party services.
-`NO_REPLY_ADDRESS`: **noreply.DOMAIN** Value for the domain part of the user's email address in the Git log if user has set KeepEmailPrivate to true. DOMAIN resolves to the value in server.DOMAIN.
The user's email will be replaced with a concatenation of the user name in lower case, "@" and NO_REPLY_ADDRESS.
-`USER_DELETE_WITH_COMMENTS_MAX_TIME`: **0** Minimum amount of time a user must exist before comments are kept when the user is deleted.
-`VALID_SITE_URL_SCHEMES`: **http, https**: Valid site url schemes for user profiles
### Service - Explore (`service.explore`)
-`REQUIRE_SIGNIN_VIEW`: **false**: Only allow signed in users to view the explore pages.
-`DISABLE_USERS_PAGE`: **false**: Disable the users explore page.
-`PAGING_NUM`: **10**: Number of webhook history events that are shown in one page.
-`PROXY_URL`: **\<empty\>**: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy. If not given, will use global proxy setting.
-`PROXY_HOSTS`: **\<empty\>`**: Comma separated list of host names requiring proxy. Glob patterns (\*) are accepted; use \*\* to match all hosts. If not given, will use global proxy setting.
-`ENABLED`: **false**: Enable to use a mail service.
-`PROTOCOL`: **\<empty\>**: Mail server protocol. One of "smtp", "smtps", "smtp+starttls", "smtp+unix", "sendmail", "dummy".
- SMTP family, if your provider does not explicitly say which protocol it uses but does provide a port, you can set SMTP_PORT instead and this will be inferred.
- **sendmail** Use the operating system's `sendmail` command instead of SMTP. This is common on Linux systems.
- **dummy** Send email messages to the log as a testing phase.
- Note that enabling sendmail will ignore all other `mailer` settings except `ENABLED`, `FROM`, `SUBJECT_PREFIX` and `SENDMAIL_PATH`.
- Enabling dummy will ignore all settings except `ENABLED`, `SUBJECT_PREFIX` and `FROM`.
-`SMTP_ADDR`: **\<empty\>**: Mail server address. e.g. smtp.gmail.com. For smtp+unix, this should be a path to a unix socket instead. _Before 1.18, this was combined with `SMTP_PORT` under the name `HOST`._
-`SMTP_PORT`: **\<empty\>**: Mail server port. If no protocol is specified, it will be inferred by this setting. Common ports are listed below. _Before 1.18, this was combined with `SMTP_ADDR` under the name `HOST`._
-`FORCE_TRUST_SERVER_CERT`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe. Consider adding the certificate to the system trust store instead.
-`USER`: **\<empty\>**: Username of mailing user (usually the sender's e-mail address).
- Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via `STARTTLS`) or SMTP host is localhost. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
-`ENABLE_HELO`: **true**: Enable HELO operation.
-`HELO_HOSTNAME`: **(retrieved from system)**: HELO hostname.
-`FROM`: **\<empty\>**: Mail from address, RFC 5322. This can be just an email address, or the "Name" \<email@example.com\> format.
-`ENVELOPE_FROM`: **\<empty\>**: Address set as the From address on the SMTP mail envelope. Set to `<>` to send an empty address.
-`SUBJECT_PREFIX`: **\<empty\>**: Prefix to be placed before e-mail subject lines.
-`SENDMAIL_PATH`: **sendmail**: The location of sendmail on the operating system (can be command or full path).
-`SENDMAIL_ARGS`: **\<empty\>**: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your `sendmail` command takes options you must set the option terminator `--`)
-`SENDMAIL_TIMEOUT`: **5m**: default timeout for sending email through sendmail
-`SENDMAIL_CONVERT_CRLF`: **true**: Most versions of sendmail prefer LF line endings rather than CRLF line endings. Set this to false if your version of sendmail requires CRLF line endings.
-`SEND_BUFFER_LEN`: **100**: Buffer length of mailing queue. **DEPRECATED** use `LENGTH` in `[queue.mailer]`
-`SEND_AS_PLAIN_TEXT`: **false**: Send mails only in plain text, without HTML alternative.
## Incoming Email (`email.incoming`)
-`ENABLED`: **false**: Enable handling of incoming emails.
-`REPLY_TO_ADDRESS`: **\<empty\>**: The email address including the `%{token}` placeholder that will be replaced per user/action. Example: `incoming+%{token}@example.com`. The placeholder must appear in the user part of the address (before the `@`).
-`HOST`: **\<empty\>**: IMAP server host.
-`PORT`: **\<empty\>**: IMAP server port.
-`USERNAME`: **\<empty\>**: Username of the receiving account.
-`PASSWORD`: **\<empty\>**: Password of the receiving account.
-`USE_TLS`: **false**: Whether the IMAP server uses TLS.
-`SKIP_TLS_VERIFY`: **false**: If set to `true`, completely ignores server certificate validation errors. This option is unsafe.
-`MAILBOX`: **INBOX**: The mailbox name where incoming mail will end up.
-`DELETE_HANDLED_MESSAGE`: **true**: Whether handled messages should be deleted from the mailbox.
-`MAXIMUM_MESSAGE_SIZE`: **10485760**: Maximum size of a message to handle. Bigger messages are ignored. Set to 0 to allow every size.
## Cache (`cache`)
-`ENABLED`: **true**: Enable the cache.
-`ADAPTER`: **memory**: Cache engine adapter, either `memory`, `redis`, `twoqueue` or `memcache`. (`twoqueue` represents a size limited LRU cache.)
-`INTERVAL`: **60**: Garbage Collection interval (sec), for memory and twoqueue cache only.
-`HOST`: **\<empty\>**: Connection string for `redis` and `memcache`. For `twoqueue` sets configuration for the queue.
- TwoQueue LRU cache: `{"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5}` or `50000` representing the maximum number of objects stored in the cache.
-`ITEM_TTL`: **16h**: Time to keep items in cache if not used, Setting it to -1 disables caching.
-`ITEM_TTL`: **8760h**: Time to keep items in cache if not used, Setting it to -1 disables caching.
-`COMMITS_COUNT`: **1000**: Only enable the cache when repository's commits count great than.
## Session (`session`)
-`PROVIDER`: **memory**: Session engine provider \[memory, file, redis, db, mysql, couchbase, memcache, postgres\]. Setting `db` will reuse the configuration in `[database]`
-`PROVIDER_CONFIG`: **data/sessions**: For file, the root path; for db, empty (database config will be used); for others, the connection string. Relative paths will be made absolute against _`AppWorkPath`_.
-`COOKIE_SECURE`: **false**: Enable this to force using HTTPS for all session access.
-`AVATAR_STORAGE_TYPE`: **default**: Storage type defined in `[storage.xxx]`. Default is `default` which will read `[storage]` if no section `[storage]` will be a type `local`.
-`AVATAR_UPLOAD_PATH`: **data/avatars**: Path to store user avatar image files.
-`AVATAR_MAX_WIDTH`: **4096**: Maximum avatar image width in pixels.
-`AVATAR_MAX_HEIGHT`: **3072**: Maximum avatar image height in pixels.
-`AVATAR_MAX_FILE_SIZE`: **1048576** (1Mb): Maximum avatar image file size in bytes.
-`AVATAR_RENDERED_SIZE_FACTOR`: **3**: The multiplication factor for rendered avatar images. Larger values result in finer rendering on HiDPI devices.
-`REPOSITORY_AVATAR_STORAGE_TYPE`: **default**: Storage type defined in `[storage.xxx]`. Default is `default` which will read `[storage]` if no section `[storage]` will be a type `local`.
-`REPOSITORY_AVATAR_UPLOAD_PATH`: **data/repo-avatars**: Path to store repository avatar image files.
-`REPOSITORY_AVATAR_FALLBACK`: **none**: How Forgejo deals with missing repository avatars
- none = no avatar will be displayed
- random = random avatar will be generated
- image = default image will be used (which is set in `REPOSITORY_AVATAR_FALLBACK_IMAGE`)
-`REPOSITORY_AVATAR_FALLBACK_IMAGE`: **/img/repo_default.png**: Image used as default repository avatar (if `REPOSITORY_AVATAR_FALLBACK` is set to image and none was uploaded)
## Project (`project`)
Default templates for project boards:
-`PROJECT_BOARD_BASIC_KANBAN_TYPE`: **To Do, In Progress, Done**
-`PROJECT_BOARD_BUG_TRIAGE_TYPE`: **Needs Triage, High Priority, Low Priority, Closed**
## Issue and pull request attachments (`attachment`)
-`ENABLED`: **true**: Whether issue and pull request attachments are enabled.
-`ALLOWED_TYPES`: **.csv,.docx,.fodg,.fodp,.fods,.fodt,.gif,.gz,.jpeg,.jpg,.log,.md,.mov,.mp4,.odf,.odg,.odp,.ods,.odt,.pdf,.png,.pptx,.svg,.tgz,.txt,.webm,.xls,.xlsx,.zip**: Comma-separated list of allowed file extensions (`.zip`), mime types (`text/plain`) or wildcard type (`image/*`, `audio/*`, `video/*`). Empty value or `*/*` allows all types.
-`MAX_SIZE`: **4**: Maximum size (MB).
-`MAX_FILES`: **5**: Maximum number of attachments that can be uploaded at once.
-`STORAGE_TYPE`: **local**: Storage type for attachments, `local` for local disk or `minio` for s3 compatible object storage service, default is `local` or other name defined with `[storage.xxx]`
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`PATH`: **data/attachments**: Path to store attachments only available when STORAGE_TYPE is `local`
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when STORAGE_TYPE is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when STORAGE_TYPE is `minio`
-`MINIO_BASE_PATH`: **attachments/**: Minio base path on the bucket only available when STORAGE_TYPE is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when STORAGE_TYPE is `minio`
## Log (`log`)
-`ROOT_PATH`: **\<empty\>**: Root path for log files.
-`MODE`: **console**: Logging mode. For multiple modes, use a comma to separate values. You can configure each mode in per mode log subsections `\[log.modename\]`. By default the file mode will log to `$ROOT_PATH/gitea.log`.
-`STACKTRACE_LEVEL`: **None**: Default log level at which to log create stack traces. \[Trace, Debug, Info, Warn, Error, Critical, Fatal, None\]
-`ENABLE_SSH_LOG`: **false**: save ssh log to log file
-`ENABLE_XORM_LOG`: **true**: Set whether to perform XORM logging. Please note SQL statement logging can be disabled by setting `LOG_SQL` to false in the `[database]` section.
### Router Log (`log`)
-`DISABLE_ROUTER_LOG`: **false**: Mute printing of the router log.
-`ROUTER`: **console**: The mode or name of the log the router should log to. (If you set this to `,` it will log to default Forgejo logger.)
NB: You must have `DISABLE_ROUTER_LOG` set to `false` for this option to take effect. Configure each mode in per mode log subsections `\[log.modename.router\]`.
### Access Log (`log`)
-`ENABLE_ACCESS_LOG`: **false**: Creates an access.log in NCSA common log format, or as per the following template
-`ACCESS`: **file**: Logging mode for the access logger, use a comma to separate values. Configure each mode in per mode log subsections `\[log.modename.access\]`. By default the file mode will log to `$ROOT_PATH/access.log`. (If you set this to `,` it will log to the default Forgejo logger.)
-`ACCESS_LOG_TEMPLATE`: **`{{.Ctx.RemoteAddr}} - {{.Identity}} {{.Start.Format "[02/Jan/2006:15:04:05 -0700]" }} "{{.Ctx.Req.Method}} {{.Ctx.Req.URL.RequestURI}} {{.Ctx.Req.Proto}}" {{.ResponseWriter.Status}} {{.ResponseWriter.Size}} "{{.Ctx.Req.Referer}}\" \"{{.Ctx.Req.UserAgent}}"`**: Sets the template used to create the access log.
- The following variables are available:
-`Ctx`: the `context.Context` of the request.
-`Identity`: the SignedUserName or `"-"` if not logged in.
-`Start`: the start time of the request.
-`ResponseWriter`: the responseWriter from the request.
-`REQUEST_ID_HEADERS`: **\<empty\>**: You can configure multiple values that are splited by comma here. It will match in the order of configuration, and the first match will be finally printed in the access log.
- e.g.
- In the Request Header: X-Request-ID: **test-id-123**
- Configuration in app.ini: REQUEST_ID_HEADERS = X-Request-ID
-`LEVEL`: **log.LEVEL**: Sets the log-level of this sublogger. Defaults to the `LEVEL` set in the global `[log]` section.
-`STACKTRACE_LEVEL`: **log.STACKTRACE_LEVEL**: Sets the log level at which to log stack traces.
-`MODE`: **name**: Sets the mode of this sublogger - Defaults to the provided subsection name. This allows you to have two different file loggers at different levels.
-`EXPRESSION`: **""**: A regular expression to match either the function name, file or message. Defaults to empty. Only log messages that match the expression will be saved in the logger.
-`FLAGS`: **stdflags**: A comma separated string representing the log flags. Defaults to `stdflags` which represents the prefix: `2009/01/23 01:23:23 ...a/b/c/d.go:23:runtime.Caller() [I]: message`. `none` means don't prefix log lines. See `modules/log/flags.go` for more information.
-`PREFIX`: **""**: An additional prefix for every log line in this logger. Defaults to empty.
-`COLORIZE`: **false**: Whether to colorize the log lines
### Console log mode (`log.console`, `log.console.*`, or `MODE=console`)
- For the console logger `COLORIZE` will default to `true` if not on windows or the terminal is determined to be able to color.
-`STDERR`: **false**: Use Stderr instead of Stdout.
### File log mode (`log.file`, `log.file.*` or `MODE=file`)
-`FILE_NAME`: Set the file name for this logger. Defaults as described above. If relative will be relative to the `ROOT_PATH`
-`LOG_ROTATE`: **true**: Rotate the log files.
-`MAX_SIZE_SHIFT`: **28**: Maximum size shift of a single file, 28 represents 256Mb.
-`DAILY_ROTATE`: **true**: Rotate logs daily.
-`MAX_DAYS`: **7**: Delete the log file after n days
-`COMPRESS`: **true**: Compress old log files by default with gzip
-`COMPRESSION_LEVEL`: **-1**: Compression level
### Conn log mode (`log.conn`, `log.conn.*` or `MODE=conn`)
-`RECONNECT_ON_MSG`: **false**: Reconnect host for every single message.
-`RECONNECT`: **false**: Try to reconnect when connection is lost.
-`PROTOCOL`: **tcp**: Set the protocol, either "tcp", "unix" or "udp".
-`ADDR`: **:7020**: Sets the address to connect to.
### SMTP log mode (`log.smtp`, `log.smtp.*` or `MODE=smtp`)
-`USER`: User email address to send from.
-`PASSWD`: Password for the smtp server.
-`HOST`: **127.0.0.1:25**: The SMTP host to connect to.
-`RECEIVERS`: Email addresses to send to.
-`SUBJECT`: **Diagnostic message from Gitea**
## Cron (`cron`)
-`ENABLED`: **false**: Enable to run all cron tasks periodically with default settings.
-`RUN_AT_START`: **false**: Run cron tasks at application start-up.
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`SCHEDULE` accept formats
- Full crontab specs, e.g. `* * * * * ?`
- Descriptors, e.g. `@midnight`, `@every 1h30m` ...
- See more: [cron documentation](https://pkg.go.dev/github.com/gogs/cron@v0.0.0-20171120032916-9f6c956d3e14)
### Basic cron tasks - enabled by default
#### Cron - Cleanup old repository archives (`cron.archive_cleanup`)
-`ENABLED`: **true**: Enable service.
-`RUN_AT_START`: **true**: Run tasks at start up time (if ENABLED).
-`SCHEDULE`: **@midnight**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
-`OLDER_THAN`: **24h**: Archives created more than `OLDER_THAN` ago are subject to deletion, e.g. `12h`.
-`SCHEDULE`: **@every 10m**: Cron syntax for scheduling update mirrors, e.g. `@every 3h`.
-`PULL_LIMIT`: **50**: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling pull mirror updating).
-`PUSH_LIMIT`: **50**: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling push mirror updating).
#### Cron - Repository Health Check (`cron.repo_health_check`)
-`SCHEDULE`: **@midnight**: Cron syntax for scheduling repository health check.
-`TIMEOUT`: **60s**: Time duration syntax for health check execution timeout.
-`ARGS`: **\<empty\>**: Arguments for command `git fsck`, e.g. `--unreachable --tags`. See more on http://git-scm.com/docs/git-fsck
-`RUN_AT_START`: **false**: Run cleanup hook_task at start time (if ENABLED).
-`SCHEDULE`: **@midnight**: Cron syntax for cleaning hook_task table.
-`CLEANUP_TYPE`**OlderThan** OlderThan or PerWebhook Method to cleanup hook_task, either by age (i.e. how long ago hook_task record was delivered) or by the number to keep per webhook (i.e. keep most recent x deliveries per webhook).
-`OLDER_THAN`: **168h**: If CLEANUP_TYPE is set to OlderThan, then any delivered hook_task records older than this expression will be deleted.
-`NUMBER_TO_KEEP`: **10**: If CLEANUP_TYPE is set to PerWebhook, this is number of hook_task records to keep for a webhook (i.e. keep the most recent x deliveries).
-`SCHEDULE`: **@midnight** : Interval as a duration between each synchronization, it will always attempt synchronization when the instance starts.
-`UPDATE_EXISTING`: **true**: Create new users, update existing user data and disable users that are not in external source anymore (default) or only create new users if UPDATE_EXISTING is set to false.
### Extended cron tasks (not enabled by default)
#### Cron - Garbage collect all repositories ('cron.git_gc_repos')
-`ENABLED`: **false**: Enable service.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
-`TIMEOUT`: **60s**: Time duration syntax for garbage collection execution timeout.
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`ARGS`: **\<empty\>**: Arguments for command `git gc`, e.g. `--aggressive --auto`. The default value is same with [git] -> GC_ARGS
#### Cron - Update the '.ssh/authorized_keys' file with Forgejo SSH keys ('cron.resync_all_sshkeys')
-`ENABLED`: **false**: Enable service.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Resynchronize pre-receive, update and post-receive hooks of all repositories ('cron.resync_all_hooks')
-`ENABLED`: **false**: Enable service.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Reinitialize all missing Git repositories for which records exist ('cron.reinit_missing_repos')
-`ENABLED`: **false**: Enable service.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
#### Cron - Delete all repositories missing their Git files ('cron.delete_missing_repos')
-`ENABLED`: **false**: Enable service.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`SCHEDULE`: **@every 72h**: Cron syntax for scheduling repository archive cleanup, e.g. `@every 1h`.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`NOTICE_ON_SUCCESS`: **false**: Set to true to switch on success notices.
-`SCHEDULE`: **@every 168h**: Cron syntax to set how often to check.
-`OLDER_THAN`: **@every 8760h**: any action older than this expression will be deleted from database, suggest using `8760h` (1 year) because that's the max length of heatmap.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`ENABLE_SUCCESS_NOTICE`: **true**: Set to false to switch off success notices.
-`SCHEDULE`: **@every 168h**: Cron syntax for scheduling a work, e.g. `@every 168h`.
-`HTTP_ENDPOINT`: **https://dl.gitea.io/gitea/version.json**: the endpoint that Gitea will check for newer versions
-`DOMAIN_ENDPOINT`: **release.forgejo.org**: the domain that, if specified, Gitea will check for newer versions. This is preferred over `HTTP_ENDPOINT`.
-`RUN_AT_START`: **false**: Run tasks at start up time (if ENABLED).
-`SCHEDULE`: **@every 24h**: Cron syntax to set how often to check.
-`OLDER_THAN`: **168h**: Only attempt to garbage collect LFSMetaObjects older than this (default 7 days)
-`LAST_UPDATED_MORE_THAN_AGO`: **72h**: Only attempt to garbage collect LFSMetaObjects that have not been attempted to be garbage collected for this long (default 3 days)
-`NUMBER_TO_CHECK_PER_REPO`: **100**: Minimum number of stale LFSMetaObjects to check per repo. Set to `0` to always check all.
-`PROPORTION_TO_CHECK_PER_REPO`: **0.6**: Check at least this proportion of LFSMetaObjects per repo. (This may cause all stale LFSMetaObjects to be checked.)
## Git (`git`)
-`PATH`: **""**: The path of Git executable. If empty, Forgejo searches through the PATH environment.
-`HOME_PATH`: **%(APP_DATA_PATH)s/home**: The HOME directory for Git.
This directory will be used to contain the `.gitconfig` and possible `.gnupg` directories that Forgejo's git calls will use. If you can confirm Forgejo is the only application running in this environment, you can set it to the normal home directory for Forgejo user.
-`DISABLE_DIFF_HIGHLIGHT`: **false**: Disables highlight of added and removed changes.
-`MAX_GIT_DIFF_LINES`: **1000**: Max number of lines allowed of a single file in diff view.
-`MAX_GIT_DIFF_LINE_CHARACTERS`: **5000**: Max character count per line highlighted in diff view.
-`MAX_GIT_DIFF_FILES`: **100**: Max number of files shown in diff view.
-`COMMITS_RANGE_SIZE`: **50**: Set the default commits range size
-`BRANCHES_RANGE_SIZE`: **20**: Set the default branches range size
-`GC_ARGS`: **\<empty\>**: Arguments for command `git gc`, e.g. `--aggressive --auto`. See more on http://git-scm.com/docs/git-gc/
-`ENABLE_AUTO_GIT_WIRE_PROTOCOL`: **true**: If use Git wire protocol version 2 when Git version >= 2.18, default is true, set to false when you always want Git wire protocol version 1.
To enable this for Git over SSH when using a OpenSSH server, add `AcceptEnv GIT_PROTOCOL` to your sshd_config file.
-`PULL_REQUEST_PUSH_MESSAGE`: **true**: Respond to pushes to a non-default branch with a URL for creating a Pull Request (if the repository has them enabled)
-`VERBOSE_PUSH`: **true**: Print status information about pushes as they are being processed.
-`VERBOSE_PUSH_DELAY`: **5s**: Only print verbose information if push takes longer than this delay.
-`LARGE_OBJECT_THRESHOLD`: **1048576**: (Go-Git only), don't cache objects greater than this in memory. (Set to 0 to disable.)
-`DISABLE_CORE_PROTECT_NTFS`: **false** Set to true to forcibly set `core.protectNTFS` to false.
-`DISABLE_PARTIAL_CLONE`: **false** Disable the usage of using partial clones for git.
-`CLONE`: **300**: Git clone from internal repositories timeout seconds.
-`PULL`: **300**: Git pull from internal repositories timeout seconds.
-`GC`: **60**: Git repository GC timeout seconds.
## Metrics (`metrics`)
-`ENABLED`: **false**: Enables /metrics endpoint for prometheus.
-`ENABLED_ISSUE_BY_LABEL`: **false**: Enable issue by label metrics with format `gitea_issues_by_label{label="bug"} 2`.
-`ENABLED_ISSUE_BY_REPOSITORY`: **false**: Enable issue by repository metrics with format `gitea_issues_by_repository{repository="org/repo"} 5`.
-`TOKEN`: **\<empty\>**: You need to specify the token, if you want to include in the authorization the metrics . The same token need to be used in prometheus parameters `bearer_token` or `bearer_token_file`.
## API (`api`)
-`ENABLE_SWAGGER`: **true**: Enables the API documentation endpoints (`/api/swagger`, `/api/v1/swagger`, …). True or false.
-`MAX_RESPONSE_ITEMS`: **50**: Max number of items in a page.
-`DEFAULT_PAGING_NUM`: **30**: Default paging number of API.
-`DEFAULT_GIT_TREES_PER_PAGE`: **1000**: Default and maximum number of items per page for Git trees API.
-`DEFAULT_MAX_BLOB_SIZE`: **10485760** (10MiB): Default max size of a blob that can be returned by the blobs API.
## OAuth2 (`oauth2`)
-`ENABLE`: **true**: Enables OAuth2 provider.
-`ACCESS_TOKEN_EXPIRATION_TIME`: **3600**: Lifetime of an OAuth2 access token in seconds
-`REFRESH_TOKEN_EXPIRATION_TIME`: **730**: Lifetime of an OAuth2 refresh token in hours
-`INVALIDATE_REFRESH_TOKENS`: **false**: Check if refresh token has already been used
-`JWT_SIGNING_ALGORITHM`: **RS256**: Algorithm used to sign OAuth2 tokens. Valid values: \[`HS256`, `HS384`, `HS512`, `RS256`, `RS384`, `RS512`, `ES256`, `ES384`, `ES512`\]
-`JWT_SECRET`: **\<empty\>**: OAuth2 authentication secret for access and refresh tokens, change this to a unique string. This setting is only needed if `JWT_SIGNING_ALGORITHM` is set to `HS256`, `HS384` or `HS512`.
-`JWT_SIGNING_PRIVATE_KEY_FILE`: **jwt/private.pem**: Private key file path used to sign OAuth2 tokens. The path is relative to `APP_DATA_PATH`. This setting is only needed if `JWT_SIGNING_ALGORITHM` is set to `RS256`, `RS384`, `RS512`, `ES256`, `ES384` or `ES512`. The file must contain a RSA or ECDSA private key in the PKCS8 format. If no key exists a 4096 bit key will be created for you.
-`MAX_TOKEN_LENGTH`: **32767**: Maximum length of token/cookie to accept from OAuth2 provider
List of locales shown in language selector. The first locale will be used as the default if user browser's language doesn't match any locale in the list.
-`NAMES`: **English,简体中文,繁體中文（香港）,繁體中文（台灣）,Deutsch,Français,Nederlands,Latviešu,Русский,Українська,日本語,Español,Português do Brasil,Português de Portugal,Polski,Български,Italiano,Suomi,Türkçe,Čeština,Српски,Svenska,한국어,Ελληνικά,فارسی,Magyar nyelv,Bahasa Indonesia,മലയാളം**: Visible names corresponding to the locales
## Markup (`markup`)
-`MERMAID_MAX_SOURCE_CHARACTERS`: **5000**: Set the maximum size of a Mermaid source. (Set to -1 to disable)
Forgejo can support Markup using external tools. The example below will add a markup named `asciidoc`.
```ini
[markup.asciidoc]
ENABLED = true
NEED_POSTPROCESS = true
FILE_EXTENSIONS = .adoc,.asciidoc
RENDER_COMMAND = "asciidoc --out-file=- -"
IS_INPUT_FILE = false
```
- ENABLED: **false** Enable markup support; set to **true** to enable this renderer.
- RENDER_CONTENT_MODE: **sanitized** How the content will be rendered.
- sanitized: Sanitize the content and render it inside current page, default to only allow a few HTML tags and attributes. Customized sanitizer rules can be defined in `[markup.sanitizer.*]`.
- no-sanitizer: Disable the sanitizer and render the content inside current page. It's **insecure** and may lead to XSS attack if the content contains malicious code.
- iframe: Render the content in a separate standalone page and embed it into current page by iframe. The iframe is in sandbox mode with same-origin disabled, and the JS code are safely isolated from parent page.
Two special environment variables are passed to the render command:
-`GITEA_PREFIX_SRC`, which contains the current URL prefix in the `src` path tree. To be used as prefix for links.
-`GITEA_PREFIX_RAW`, which contains the current URL prefix in the `raw` path tree. To be used as prefix for image paths.
If `RENDER_CONTENT_MODE` is `sanitized`, Forgejo supports customizing the sanitization policy for rendered HTML. The example below will support KaTeX output from pandoc.
```ini
[markup.sanitizer.TeX]
; Pandoc renders TeX segments as <span>s with the "math" class, optionally
; with "inline" or "display" classes depending on context.
-`FORMAT`: Time format to display on UI. i.e. RFC1123 or 2006-01-02 15:04:05
-`DEFAULT_UI_LOCATION`: Default location of time on the UI, so that we can display correct user's time on UI. i.e. Asia/Shanghai
## Task (`task`)
Task queue configuration has been moved to `queue.task`. However, the below configuration values are kept for backwards compatibility:
-`QUEUE_TYPE`: **channel**: Task queue type, could be `channel` or `redis`.
-`QUEUE_LENGTH`: **1000**: Task queue length, available only when `QUEUE_TYPE` is `channel`.
-`QUEUE_CONN_STR`: **redis://127.0.0.1:6379/0**: Task queue connection string, available only when `QUEUE_TYPE` is `redis`. If redis needs a password, use `redis://123@127.0.0.1:6379/0`.
## Migrations (`migrations`)
-`MAX_ATTEMPTS`: **3**: Max attempts per http/https request on migrations.
-`RETRY_BACKOFF`: **3**: Backoff time per http/https request retry (seconds)
-`ALLOWED_DOMAINS`: **\<empty\>**: Domains allowlist for migrating repositories, default is blank. It means everything will be allowed. Multiple domains could be separated by commas. Wildcard is supported: `github.com, *.github.com`.
-`BLOCKED_DOMAINS`: **\<empty\>**: Domains blocklist for migrating repositories, default is blank. Multiple domains could be separated by commas. When `ALLOWED_DOMAINS` is not blank, this option has a higher priority to deny domains. Wildcard is supported.
-`ALLOW_LOCALNETWORKS`: **false**: Allow private addresses defined by RFC 1918, RFC 1122, RFC 4632 and RFC 4291. If a domain is allowed by `ALLOWED_DOMAINS`, this option will be ignored.
-`LIMIT_SIZE_VAGRANT`: **-1**: Maximum size of a Vagrant upload (`-1` means no limits, format `1000`, `1 MB`, `1 GiB`)
## Mirror (`mirror`)
-`ENABLED`: **true**: Enables the mirror functionality. Set to **false** to disable all mirrors. Pre-existing mirrors remain valid but won't be updated; may be converted to regular repo.
-`DISABLE_NEW_PULL`: **false**: Disable the creation of **new** pull mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
-`DISABLE_NEW_PUSH`: **false**: Disable the creation of **new** push mirrors. Pre-existing mirrors remain valid. Will be ignored if `mirror.ENABLED` is `false`.
-`DEFAULT_INTERVAL`: **8h**: Default interval between each check
-`MIN_INTERVAL`: **10m**: Minimum interval for checking. (Must be >1m).
## LFS (`lfs`)
Storage configuration for lfs data. It will be derived from default `[storage]` or
`[storage.xxx]` when set `STORAGE_TYPE` to `xxx`. When derived, the default of `PATH`
is `data/lfs` and the default of `MINIO_BASE_PATH` is `lfs/`.
-`STORAGE_TYPE`: **local**: Storage type for lfs, `local` for local disk or `minio` for s3 compatible object storage service or other name defined with `[storage.xxx]`
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`PATH`: **./data/lfs**: Where to store LFS files, only available when `STORAGE_TYPE` is `local`. If not set it fall back to deprecated LFS_CONTENT_PATH value in [server] section.
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is``minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the lfs only available when `STORAGE_TYPE` is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_BASE_PATH`: **lfs/**: Minio base path on the bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
## Storage (`storage`)
Default storage configuration for attachments, lfs, avatars and etc.
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is``minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the data only available when `STORAGE_TYPE` is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
And you can also define a customize storage like below:
```ini
[storage.my_minio]
STORAGE_TYPE = minio
; Minio endpoint to connect only available when STORAGE_TYPE is `minio`
MINIO_ENDPOINT = localhost:9000
; Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
MINIO_ACCESS_KEY_ID =
; Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
MINIO_SECRET_ACCESS_KEY =
; Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
MINIO_BUCKET = gitea
; Minio location to create bucket only available when STORAGE_TYPE is `minio`
MINIO_LOCATION = us-east-1
; Minio enabled ssl only available when STORAGE_TYPE is `minio`
MINIO_USE_SSL = false
```
And used by `[attachment]`, `[lfs]` and etc. as `STORAGE_TYPE`.
Configuration for repository archive storage. It will inherit from default `[storage]` or
`[storage.xxx]` when set `STORAGE_TYPE` to `xxx`. The default of `PATH`
is `data/repo-archive` and the default of `MINIO_BASE_PATH` is `repo-archive/`.
-`STORAGE_TYPE`: **local**: Storage type for repo archive, `local` for local disk or `minio` for s3 compatible object storage service or other name defined with `[storage.xxx]`
-`SERVE_DIRECT`: **false**: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
-`PATH`: **./data/repo-archive**: Where to store archive files, only available when `STORAGE_TYPE` is `local`.
-`MINIO_ENDPOINT`: **localhost:9000**: Minio endpoint to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_ACCESS_KEY_ID`: Minio accessKeyID to connect only available when `STORAGE_TYPE` is `minio`
-`MINIO_SECRET_ACCESS_KEY`: Minio secretAccessKey to connect only available when `STORAGE_TYPE is``minio`
-`MINIO_BUCKET`: **gitea**: Minio bucket to store the lfs only available when `STORAGE_TYPE` is `minio`
-`MINIO_LOCATION`: **us-east-1**: Minio location to create bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_BASE_PATH`: **repo-archive/**: Minio base path on the bucket only available when `STORAGE_TYPE` is `minio`
-`MINIO_USE_SSL`: **false**: Minio enabled ssl only available when `STORAGE_TYPE` is `minio`
## Proxy (`proxy`)
-`PROXY_ENABLED`: **false**: Enable the proxy if true, all requests to external via HTTP will be affected, if false, no proxy will be used even environment http_proxy/https_proxy
-`PROXY_URL`: **\<empty\>**: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy
-`DEFAULT_ACTIONS_URL`: **https://codeberg.org**: Default address to get action plugins, e.g. the default value means downloading from "https://codeberg.org/actions/checkout" for "uses: actions/checkout@v3"
`DEFAULT_ACTIONS_URL` indicates where should we find the relative path action plugin. i.e. when use an action in a workflow file like
```yaml
name: versions
on:
push:
branches:
- main
- releases/*
jobs:
build:
runs-on: ubuntu-latest
steps:
- uses: actions/checkout@v3
```
Now we need to know how to get actions/checkout, this configuration is the default git server to get it. That means we will get the repository via git clone ${DEFAULT_ACTIONS_URL}/actions/checkout and fetch tag v3.
To help people who don't want to mirror these actions in their git instances, the default value is https://codeberg.org
To help people run actions totally in their network, they can change the value and copy all necessary action repositories into their git server.
Of course we should support the form in future PRs like
```yaml
steps:
- uses: codeberg.org/actions/checkout@v3
```
although Github don't support this form.
## Other (`other`)
-`SHOW_FOOTER_BRANDING`: **false**: Show Forgejo branding in the footer.
-`SHOW_FOOTER_VERSION`: **true**: Show Forgejo and Go version information in the footer.
-`SHOW_FOOTER_TEMPLATE_LOAD_TIME`: **true**: Show time of template execution in the footer.
