mirror of
https://codeberg.org/forgejo/docs.git
synced 2024-11-27 18:32:37 -05:00
contributor: infrastructure: move to a dedicated repository
The https://code.forgejo.org/infrastructure organization was created recently to host infrastructure resources. The documentation should go there instead of the Forgejo documentation.
This commit is contained in:
Earl Warren
Earl Warren
parent
1a72849b87
commit
f58b896f32
2 changed files with 3 additions and 692 deletions
|
|
@ -36,7 +36,7 @@ We encourage you to [read our warm welcome first](./welcome/), then get involved
|
|||
- [Forgejo runner implementation notes](https://code.forgejo.org/forgejo/runner/#hacking)
|
||||
- [Dependency management](./dependencies/)
|
||||
- For maintainers
|
||||
- [Hardware infrastructure](./infrastructure/)
|
||||
- [Hardware infrastructure](https://code.forgejo.org/infrastructure/documentation#readme)
|
||||
- [Release management](./release/)
|
||||
- [Managing dependencies between repositories](./repositories-dependencies/)
|
||||
- [Secrets](./secrets/)
|
||||
|
|
|
|||
|
|
@ -3,694 +3,5 @@ title: Hardware infrastructure
|
|||
license: 'CC-BY-SA-4.0'
|
||||
---
|
||||
|
||||
The resources used by the infrastructure are in the https://code.forgejo.org/infrastructure/ organization.
|
||||
There is a [dedicated chatroom](https://matrix.to/#/#forgejo-ci:matrix.org).
|
||||
|
||||
## LXC Hosts
|
||||
|
||||
All LXC hosts are setup with [lxc-helpers](https://code.forgejo.org/forgejo/lxc-helpers/).
|
||||
|
||||
```sh
|
||||
name=forgejo-host
|
||||
lxc-helpers.sh lxc_container_run $name -- sudo --user debian bash
|
||||
```
|
||||
|
||||
See https://github.com/mikesart/inotify-info. Running multiple LXC
|
||||
containers will quickly use the default limit (128 on bookworm).
|
||||
|
||||
```sh
|
||||
echo fs.inotify.max_user_instances=8192 | sudo tee -a /etc/sysctl.conf
|
||||
sudo sysctl -p
|
||||
```
|
||||
|
||||
### Unprivileged
|
||||
|
||||
```sh
|
||||
name=forgejo-host
|
||||
lxc-helpers.sh lxc_container_create --config "unprivileged" $name
|
||||
echo "lxc.start.auto = 1" | sudo tee -a /var/lib/lxc/$name/config
|
||||
lxc-helpers.sh lxc_container_start $name
|
||||
lxc-helpers.sh lxc_container_user_install $name $(id -u) $USER
|
||||
```
|
||||
|
||||
### Docker enabled
|
||||
|
||||
```sh
|
||||
name=forgejo-host
|
||||
lxc-helpers.sh lxc_container_create --config "docker" $name
|
||||
echo "lxc.start.auto = 1" | sudo tee -a /var/lib/lxc/$name/config
|
||||
lxc-helpers.sh lxc_container_start $name
|
||||
lxc-helpers.sh lxc_install_docker $name
|
||||
lxc-helpers.sh lxc_container_user_install $name $(id -u) $USER
|
||||
```
|
||||
|
||||
### K8S enabled
|
||||
|
||||
```sh
|
||||
name=forgejo-host
|
||||
lxc-helpers.sh lxc_container_create --config "k8s" $name
|
||||
echo "lxc.start.auto = 1" | sudo tee -a /var/lib/lxc/$name/config
|
||||
lxc-helpers.sh lxc_container_start $name
|
||||
lxc-helpers.sh lxc_container_user_install $name $(id -u) $USER
|
||||
```
|
||||
|
||||
### Docker and LXC enabled
|
||||
|
||||
```sh
|
||||
name=forgejo-host
|
||||
ipv4=10.85.12
|
||||
ipv6=fc33
|
||||
lxc-helpers.sh lxc_container_create --config "docker lxc" $name
|
||||
echo "lxc.start.auto = 1" | sudo tee -a /var/lib/lxc/$name/config
|
||||
lxc-helpers.sh lxc_container_start $name
|
||||
lxc-helpers.sh lxc_install_docker $name
|
||||
lxc-helpers.sh lxc_install_lxc $name $ipv4 $ipv6
|
||||
lxc-helpers.sh lxc_container_user_install $name $(id -u) $USER
|
||||
```
|
||||
|
||||
## nftables
|
||||
|
||||
```sh
|
||||
sudo nft list ruleset
|
||||
```
|
||||
|
||||
## Host reverse proxy
|
||||
|
||||
The reverse proxy on a host forwards to the designated LXC container with
|
||||
something like the following examples in
|
||||
`/etc/nginx/sites-available/example.com`, where A.B.C.D is the
|
||||
IP allocated to the LXC container running the web service.
|
||||
|
||||
And symlink:
|
||||
|
||||
```sh
|
||||
ln -s /etc/nginx/sites-available/example.com /etc/nginx/sites-enabled/example.com
|
||||
```
|
||||
|
||||
The certificate is obtained once and automatically renewed with:
|
||||
|
||||
```
|
||||
sudo apt-get install certbot python3-certbot-nginx
|
||||
sudo certbot -n --agree-tos --email contact@forgejo.org -d example.com --nginx
|
||||
```
|
||||
|
||||
When removing a configuration, the certificate can also be removed with:
|
||||
|
||||
```
|
||||
sudo certbot delete --cert-name example.com
|
||||
```
|
||||
|
||||
Forwarding TCP streams (useful for ssh) requires installing the module:
|
||||
|
||||
```sh
|
||||
sudo apt-get install libnginx-mod-stream
|
||||
```
|
||||
|
||||
## Host wakeup-on-logs
|
||||
|
||||
https://code.forgejo.org/infrastructure/wakeup-on-logs
|
||||
|
||||
### K8S wakeup-on-logs script
|
||||
|
||||
```
|
||||
$ cat /etc/wakeup-on-logs/forgejo-v8
|
||||
#!/bin/bash
|
||||
|
||||
set -x
|
||||
|
||||
self="${BASH_SOURCE[0]}"
|
||||
name=$(basename $self)
|
||||
# keep it lower than https://code.forgejo.org/infrastructure/wakeup-on-logs
|
||||
# otherwise it will get killed by it
|
||||
timeout=4m
|
||||
|
||||
function lxc_run() {
|
||||
lxc-attach $name -- sudo --user debian KUBECONFIG=/etc/rancher/k3s/k3s.yaml "$@" |& tee -a /var/log/$name.log
|
||||
}
|
||||
|
||||
image=codeberg.org/forgejo-experimental/forgejo
|
||||
major=${name##*v}
|
||||
digest=$(skopeo inspect --format "{{.Digest}}" docker://$image:$major-rootless)
|
||||
values=https://code.forgejo.org/infrastructure/k8s/raw/branch/main/forgejo-v$major/values.yml
|
||||
lxc_run helm upgrade forgejo -f $values -f /home/debian/secrets.yml oci://code.forgejo.org/forgejo-helm/forgejo --atomic --wait --timeout $timeout --install --set image.digest=$digest
|
||||
```
|
||||
|
||||
### Forgejo example
|
||||
|
||||
```
|
||||
server {
|
||||
listen 80;
|
||||
listen [::]:80;
|
||||
|
||||
server_name example.com;
|
||||
|
||||
location / {
|
||||
proxy_pass http://A.B.C.D:8080;
|
||||
proxy_set_header Host $host;
|
||||
proxy_set_header X-Real-IP $remote_addr;
|
||||
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
|
||||
proxy_set_header X-Forwarded-Proto https;
|
||||
client_max_body_size 2G;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
### GitLab example
|
||||
|
||||
```nginx
|
||||
server {
|
||||
listen 80;
|
||||
listen [::]:80;
|
||||
|
||||
server_name example.com;
|
||||
|
||||
location / {
|
||||
proxy_set_header Upgrade $http_upgrade;
|
||||
proxy_set_header Connection "upgrade";
|
||||
proxy_set_header Host $http_host;
|
||||
proxy_set_header X-Real-IP $remote_addr;
|
||||
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
|
||||
proxy_set_header X-Forwarded-Proto $scheme;
|
||||
proxy_set_header X-Frame-Options SAMEORIGIN;
|
||||
|
||||
client_body_timeout 60;
|
||||
client_max_body_size 200M;
|
||||
send_timeout 1200;
|
||||
lingering_timeout 5;
|
||||
|
||||
proxy_buffering off;
|
||||
proxy_connect_timeout 90;
|
||||
proxy_send_timeout 300;
|
||||
proxy_read_timeout 600s;
|
||||
|
||||
proxy_pass http://example.com;
|
||||
proxy_http_version 1.1;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
### Vanila example
|
||||
|
||||
```nginx
|
||||
server {
|
||||
listen 80;
|
||||
listen [::]:80;
|
||||
|
||||
server_name example.com;
|
||||
|
||||
location / {
|
||||
proxy_pass http://A.B.C.D;
|
||||
proxy_set_header Host $host;
|
||||
proxy_set_header X-Real-IP $remote_addr;
|
||||
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
|
||||
proxy_set_header X-Forwarded-Proto https;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
### 302 redirection
|
||||
|
||||
```nginx
|
||||
server {
|
||||
listen 80;
|
||||
listen [::]:80;
|
||||
|
||||
server_name example.com;
|
||||
return 302 https://other.example.com$request_uri;
|
||||
}
|
||||
```
|
||||
|
||||
## Forgejo runners
|
||||
|
||||
The LXC container in which the runner is installed must have capabilities that support the backend.
|
||||
|
||||
- docker:// needs a Docker enabled container
|
||||
- lxc:// needs a Docker and LXC enabled container
|
||||
|
||||
The runners it contains are not started at boot, it must be done manually. The bash history has the command line to do so.
|
||||
|
||||
### Installation
|
||||
|
||||
```shell
|
||||
version=3.5.0
|
||||
sudo wget -O /usr/local/bin/forgejo-runner-$version https://code.forgejo.org/forgejo/runner/releases/download/v$version/forgejo-runner-$version-linux-amd64
|
||||
sudo chmod +x /usr/local/bin/forgejo-runner-$version
|
||||
echo 'export TERM=xterm-256color' >> .bashrc
|
||||
```
|
||||
|
||||
### Creating a runner
|
||||
|
||||
Multiple runners can co-exist on the same machine. To keep things
|
||||
organized they are located in a directory that is the same as the URL
|
||||
from which the token is obtained. For instance
|
||||
DIR=codeberg.org/forgejo-integration means that the token was obtained from the
|
||||
https://codeberg.org/forgejo-integration organization.
|
||||
|
||||
If a runner only provides unprivileged docker containers, the labels
|
||||
in `config.yml` should be:
|
||||
`labels: ['docker:docker://node:20-bookworm']`.
|
||||
|
||||
If a runner provides LXC containers and unprivileged docker
|
||||
containers, the labels in `config.yml` should be
|
||||
`labels: ['self-hosted:lxc://debian:bookworm', 'docker:docker://node:20-bookworm']`.
|
||||
|
||||
```shell
|
||||
name=myrunner
|
||||
mkdir -p $DIR ; cd $DIR
|
||||
forgejo-runner generate-config > config-$name.yml
|
||||
## edit config-$name.yml and adjust the `labels:`
|
||||
## Obtain a $TOKEN from https://$DIR
|
||||
forgejo-runner-$version register --no-interactive --token $TOKEN --name runner --instance https://codeberg.org
|
||||
forgejo-runner-$version --config config-$name.yml daemon |& cat -v > runner.log &
|
||||
```
|
||||
|
||||
## Octopuce
|
||||
|
||||
[Octopuce provides hardware](https://codeberg.org/forgejo/sustainability) managed by [the devops team](https://codeberg.org/forgejo/governance/src/branch/main/TEAMS.md#devops). It can only be accessed via SSH.
|
||||
|
||||
To access the services hosted on the LXC containers, ssh port forwarding to the private IPs can be used. For instance:
|
||||
|
||||
```sh
|
||||
echo 127.0.0.1 private.forgejo.org >> /etc/hosts
|
||||
sudo ssh -i ~/.ssh/id_rsa -L 80:10.77.0.128:80 debian@forgejo01.octopuce.fr
|
||||
firefox http://private.forgejo.org
|
||||
```
|
||||
|
||||
### Containers
|
||||
|
||||
- `forgejo-host`
|
||||
|
||||
Dedicated to http://private.forgejo.org
|
||||
|
||||
- Docker enabled
|
||||
- upgrades checklist:
|
||||
```sh
|
||||
emacs /home/debian/run-forgejo.sh # change the `image=`
|
||||
docker stop forgejo
|
||||
sudo rsync -av --numeric-ids --delete --progress /srv/forgejo/ /root/forgejo-backup/
|
||||
docker rm forgejo
|
||||
bash -x /home/debian/run-forgejo.sh
|
||||
docker logs -n 200 -f forgejo
|
||||
```
|
||||
|
||||
- `forgejo-runner-host`
|
||||
|
||||
Has runners installed to run against private.forgejo.org
|
||||
|
||||
- Docker and LXC enabled 10.85.12 fc33
|
||||
|
||||
## Hetzner
|
||||
|
||||
All hardware machines are running Debian GNU/linux bookworm. They are LXC hosts
|
||||
setup with [lxc-helpers](https://code.forgejo.org/forgejo/lxc-helpers/).
|
||||
|
||||
> **NOTE:** only use [EX101 with a ASRockRack W680D4U-1L motherboard](https://forum.hetzner.com/index.php?thread/31135-all-ex101-with-asustek-w680-crash-on-sequential-read/).
|
||||
|
||||
### vSwitch
|
||||
|
||||
A vSwitch is assigned via the Robot console on all servers for backend communications
|
||||
and [configured](https://docs.hetzner.com/robot/dedicated-server/network/vswitch#example-debian-configuration)
|
||||
in /etc/network/interfaces for each of them with something like:
|
||||
|
||||
```
|
||||
auto enp5s0.4000
|
||||
iface enp5s0.4000 inet static
|
||||
address 10.53.100.2
|
||||
netmask 255.255.255.0
|
||||
vlan-raw-device enp5s0
|
||||
mtu 1400
|
||||
```
|
||||
|
||||
The IP address ends with the same number as the hardware (hetzner02 => .2).
|
||||
|
||||
### DRBD
|
||||
|
||||
DRBD is [configured](https://linbit.com/drbd-user-guide/drbd-guide-9_0-en/#p-work) like in the following example with hetzner02 as the primary and hetzner03 as the secondary:
|
||||
|
||||
```sh
|
||||
$ apt-get install drbd-utils
|
||||
$ cat /etc/drbd.d/r0.res
|
||||
resource r0 {
|
||||
net {
|
||||
# A : write completion is determined when data is written to the local disk and the local TCP transmission buffer
|
||||
# B : write completion is determined when data is written to the local disk and remote buffer cache
|
||||
# C : write completion is determined when data is written to both the local disk and the remote disk
|
||||
protocol C;
|
||||
cram-hmac-alg sha1;
|
||||
# any secret key for authentication among nodes
|
||||
shared-secret "***";
|
||||
}
|
||||
disk {
|
||||
resync-rate 1000M;
|
||||
}
|
||||
on hetzner02 {
|
||||
address 10.53.100.2:7788;
|
||||
volume 0 {
|
||||
# device name
|
||||
device /dev/drbd0;
|
||||
# specify disk to be used for device above
|
||||
disk /dev/nvme0n1p5;
|
||||
# where to create metadata
|
||||
# specify the block device name when using a different disk
|
||||
meta-disk internal;
|
||||
}
|
||||
}
|
||||
on hetzner03 {
|
||||
address 10.53.100.3:7788;
|
||||
volume 0 {
|
||||
device /dev/drbd0;
|
||||
disk /dev/nvme1n1p5;
|
||||
meta-disk internal;
|
||||
}
|
||||
}
|
||||
}
|
||||
$ sudo drbdadm create-md r0
|
||||
$ sudo drbdadm up r0
|
||||
```
|
||||
|
||||
On hetzner02 (the primary), [pretend all is in sync](https://linbit.com/drbd-user-guide/drbd-guide-9_0-en/#s-skip-initial-resync) to save the initial bitmap sync since
|
||||
there is actually no data at all.
|
||||
|
||||
```sh
|
||||
sudo drbdadm new-current-uuid --clear-bitmap r0/0
|
||||
```
|
||||
|
||||
The DRBD device is mounted on `/var/lib/lxc` in `/etc/fstab` there is a noauto line:
|
||||
|
||||
```
|
||||
/dev/drbd0 /var/lib/lxc ext4 noauto,defaults 0 0
|
||||
```
|
||||
|
||||
To prevent split brain situations a manual step is required at boot
|
||||
time, on the machine that is going to be the primary.
|
||||
|
||||
```sh
|
||||
sudo drbdadm up r0
|
||||
sudo drbdsetup status
|
||||
sudo drbdadm primary r0
|
||||
sudo mount /var/lib/lxc
|
||||
sudo lxc-autostart start
|
||||
sudo lxc-ls -f
|
||||
sudo drbdsetup status
|
||||
```
|
||||
|
||||
### hetzner{01,04}
|
||||
|
||||
https://hetzner{01,04}.forgejo.org run on [EX101](https://www.hetzner.com/dedicated-rootserver/ex101) Hetzner hardware.
|
||||
|
||||
#### LXC
|
||||
|
||||
```sh
|
||||
lxc-helpers.sh lxc_install_lxc_inside 10.41.13 fc29
|
||||
```
|
||||
|
||||
#### Disk partitioning
|
||||
|
||||
- First disk
|
||||
- OS
|
||||
- a partition mounted on /srv where non precious data goes such as the LXC containers with runners.
|
||||
- Second disk
|
||||
- configured with DRBD for precious data.
|
||||
|
||||
#### Root filesystem backups
|
||||
|
||||
- `hetzner01:/etc/cron.daily/backup-hetzner04`
|
||||
`rsync -aHS --delete-excluded --delete --numeric-ids --exclude /proc --exclude /dev --exclude /sys --exclude /precious --exclude /srv --exclude /var/lib/lxc 10.53.100.4:/ /srv/backups/hetzner04/ >& /var/log/$(basename $0).log`
|
||||
- `hetzner04:/etc/cron.daily/backup-hetzner01`
|
||||
`rsync -aHS --delete-excluded --delete --numeric-ids --exclude /proc --exclude /dev --exclude /sys --exclude /precious --exclude /srv --exclude /var/lib/lxc 10.53.100.1:/ /srv/backups/hetzner01/ >& /var/log/$(basename $0).log`
|
||||
|
||||
#### LXC containers
|
||||
|
||||
- `runner-lxc-helpers` (hetzner01)
|
||||
|
||||
Dedicated to Forgejo runners for the https://code.forgejo.org/forgejo/lxc-helpers project.
|
||||
|
||||
- K8S enabled
|
||||
- code.forgejo.org/forgejo/lxc-helpers/config\*.yml
|
||||
|
||||
- `forgejo-runners` (hetzner01)
|
||||
|
||||
Dedicated to Forgejo runners for the https://codeberg.org/forgejo organization.
|
||||
|
||||
- Docker enabled
|
||||
- codeberg.org/forgejo/config\*.yml
|
||||
|
||||
- `runner01-lxc` (hetzner01)
|
||||
|
||||
Dedicated to Forgejo runners for https://code.forgejo.org.
|
||||
|
||||
- Docker and LXC enabled 10.194.201 fc35
|
||||
- code.forgejo.org/forgejo/config\*.yml
|
||||
- code.forgejo.org/actions/config\*.yml
|
||||
- code.forgejo.org/forgejo-integration/config\*.yml
|
||||
- code.forgejo.org/forgejo-contrib/config\*.yml
|
||||
- code.forgejo.org/f3/config\*.yml
|
||||
- code.forgejo.org/forgefriends/config\*.yml
|
||||
|
||||
- `forgejo-v9` (hetzner04) same as `forgejo-v8`
|
||||
- `forgejo-v8` (hetzner04)
|
||||
|
||||
Dedicated to https://v8.next.forgejo.org, see https://code.forgejo.org/infrastructure/k8s
|
||||
|
||||
- K8S enabled
|
||||
- K8S wakeup-on-logs script /etc/wakeup-on-logs/forgejo-v8
|
||||
- [Values file](https://code.forgejo.org/infrastructure/k8s/src/branch/main/forgejo-v8/values.yml)
|
||||
- nginx forwarding of SSH streams in `/etc/nginx/modules-enabled/next.forgejo.org.conf`
|
||||
|
||||
```
|
||||
stream {
|
||||
|
||||
# v8 ip's
|
||||
upstream v8 {
|
||||
least_conn;
|
||||
server 10.41.13.27:2222;
|
||||
}
|
||||
|
||||
# v8 definition
|
||||
server {
|
||||
listen 2080; # the port to listen on this server
|
||||
listen [::]:2080;
|
||||
proxy_pass v8; # forward traffic to this upstream group
|
||||
proxy_timeout 3s;
|
||||
proxy_connect_timeout 3s;
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
- `forgefriends-forum` (hetzner04)
|
||||
|
||||
Dedicated to https://forum.forgefriends.org
|
||||
|
||||
- Docker enabled
|
||||
|
||||
- `forgefriends-gitlab` (hetzner04)
|
||||
|
||||
Dedicated to https://lab.forgefriends.org
|
||||
|
||||
- Docker enabled
|
||||
|
||||
- `forgefriends-cloud` (hetzner04)
|
||||
|
||||
Dedicated to https://cloud.forgefriends.org
|
||||
|
||||
- Docker enabled
|
||||
|
||||
- `gna-forgejo` (hetzner04)
|
||||
|
||||
Dedicated to https://forgejo.gna.org
|
||||
|
||||
- Docker enabled
|
||||
|
||||
- `gna-forum` (hetzner04)
|
||||
|
||||
Dedicated to https://forum.gna.org
|
||||
|
||||
- Docker enabled
|
||||
|
||||
### hetzner{02,03}
|
||||
|
||||
https://hetzner02.forgejo.org & https://hetzner03.forgejo.org run on [EX44](https://www.hetzner.com/dedicated-rootserver/ex44) Hetzner hardware.
|
||||
|
||||
#### LXC
|
||||
|
||||
```sh
|
||||
lxc-helpers.sh lxc_install_lxc_inside 10.6.83 fc16
|
||||
```
|
||||
|
||||
#### Disk partitioning
|
||||
|
||||
- First disk
|
||||
- OS
|
||||
- a partition configured with DRBD for precious data mounted on /var/lib/lxc
|
||||
- Second disk
|
||||
- non precious data such as the LXC containers with runners.
|
||||
|
||||
#### Root filesystem backups
|
||||
|
||||
- `hetzner03:/etc/cron.daily/backup-hetzner02`
|
||||
`rsync -aHS --delete-excluded --delete --numeric-ids --exclude /proc --exclude /dev --exclude /sys --exclude /srv --exclude /var/lib/lxc 10.53.100.2:/ /srv/backups/hetzner02/`
|
||||
- `hetzner02:/etc/cron.daily/backup-hetzner03`
|
||||
`rsync -aHS --delete-excluded --delete --numeric-ids --exclude /proc --exclude /dev --exclude /sys --exclude /srv --exclude /var/lib/lxc 10.53.100.3:/ /srv/backups/hetzner03/`
|
||||
|
||||
#### Public IP addresses
|
||||
|
||||
The public IP addresses attached to the hosts are not failover IPs that can be moved from one host to the next.
|
||||
The DNS entry needs to be updated if the primary hosts changes.
|
||||
|
||||
When additional IP addresses are attached to the server, they are added to `/etc/network/interfaces` like
|
||||
ipv4 65.21.67.71 and ipv6 2a01:4f9:3081:51ec::102 below.
|
||||
|
||||
```
|
||||
auto enp5s0
|
||||
iface enp5s0 inet static
|
||||
address 65.21.67.73
|
||||
netmask 255.255.255.192
|
||||
gateway 65.21.67.65
|
||||
# route 65.21.67.64/26 via 65.21.67.65
|
||||
up route add -net 65.21.67.64 netmask 255.255.255.192 gw 65.21.67.65 dev enp5s0
|
||||
# BEGIN code.forgejo.org
|
||||
up ip addr add 65.21.67.71/32 dev enp5s0
|
||||
up nft -f /home/debian/code.nftables
|
||||
down ip addr del 65.21.67.71/32 dev enp5s0
|
||||
# END code.forgejo.org
|
||||
|
||||
iface enp5s0 inet6 static
|
||||
address 2a01:4f9:3081:51ec::2
|
||||
netmask 64
|
||||
gateway fe80::1
|
||||
# BEGIN code.forgejo.org
|
||||
up ip -6 addr add 2a01:4f9:3081:51ec::102/64 dev enp5s0
|
||||
down ip -6 addr del 2a01:4f9:3081:51ec::102/64 dev enp5s0
|
||||
# END code.forgejo.org
|
||||
```
|
||||
|
||||
#### Port forwarding
|
||||
|
||||
Forwarding a port to an LXC container can be done with `/home/debian/code.nftables` for
|
||||
the public IP of code.forgejo.org (65.21.67.71) to the private IP of the `code` LXC container:
|
||||
|
||||
```
|
||||
add table ip code;
|
||||
flush table ip code;
|
||||
add chain ip code prerouting {
|
||||
type nat hook prerouting priority 0;
|
||||
policy accept;
|
||||
ip daddr 65.21.67.71 tcp dport { ssh } dnat to 10.6.83.195;
|
||||
};
|
||||
```
|
||||
|
||||
with `nft -f /root/code.nftables`.
|
||||
|
||||
#### 302 redirects
|
||||
|
||||
- On hetzner02
|
||||
- try.next.forgejo.org redirects to v(latest stable).next.forgejo.org
|
||||
- dev.next.forgejo.org redirects to v(latest dev).next.forgejo.org
|
||||
|
||||
#### Containers
|
||||
|
||||
- `forgejo-code` on hetzner02
|
||||
|
||||
Dedicated to https://code.forgejo.org
|
||||
|
||||
- Docker enabled
|
||||
- upgrades checklist:
|
||||
- `ssh -t debian@hetzner02.forgejo.org lxc-helpers.sh lxc_container_run forgejo-code -- sudo --user debian bash`
|
||||
```sh
|
||||
emacs /home/debian/run-forgejo.sh # change the `image=`
|
||||
docker stop forgejo
|
||||
```
|
||||
- `ssh -t debian@hetzner02.forgejo.org sudo /etc/cron.daily/backup-forgejo-code`
|
||||
- `ssh -t debian@hetzner02.forgejo.org lxc-helpers.sh lxc_container_run forgejo-code -- sudo --user debian bash`
|
||||
```sh
|
||||
docker rm forgejo
|
||||
bash -x /home/debian/run-forgejo.sh
|
||||
docker logs -n 200 -f forgejo
|
||||
```
|
||||
- Rotating 30 days backups happen daily `/etc/cron.daily/forgejo-code-backup.sh`
|
||||
- Add code.forgejo.org to the forgejo.org SPF record
|
||||
|
||||
- `forgejo-next` on hetzner02
|
||||
|
||||
Dedicated to https://next.forgejo.org
|
||||
|
||||
- Docker enabled
|
||||
- `/etc/cron.hourly/forgejo-upgrade` runs `/home/debian/run-forgejo.sh > /home/debian/run-forgejo-$(date +%d).log`
|
||||
- When a new major version is published (8.0 for instance) `run-forgejo.sh` must be updated with it
|
||||
- Reset everything
|
||||
```sh
|
||||
docker stop forgejo
|
||||
docker rm forgejo
|
||||
sudo rm -fr /srv/forgejo.old
|
||||
sudo mv /srv/forgejo /srv/forgejo.old
|
||||
bash -x /home/debian/run-forgejo.sh
|
||||
```
|
||||
- `/home/debian/next.nftables`
|
||||
```
|
||||
add table ip next;
|
||||
flush table ip next;
|
||||
add chain ip next prerouting {
|
||||
type nat hook prerouting priority 0;
|
||||
policy accept;
|
||||
ip daddr 65.21.67.65 tcp dport { 2020 } dnat to 10.6.83.213;
|
||||
};
|
||||
```
|
||||
- Add to `iface enp5s0 inet static` in `/etc/network/interfaces`
|
||||
```
|
||||
up nft -f /home/debian/next.nftables
|
||||
```
|
||||
|
||||
```
|
||||
- `/etc/nginx/sites-available/next.forgejo.org` same as `/etc/nginx/sites-available/code.forgejo.org`
|
||||
|
||||
```
|
||||
|
||||
- `forgejo-v7` on hetzner02
|
||||
|
||||
Dedicated to https://v7.next.forgejo.org
|
||||
|
||||
- Docker enabled
|
||||
- `/etc/cron.hourly/forgejo-upgrade` runs `/home/debian/run-forgejo.sh > /home/debian/run-forgejo-$(date +%d).log`
|
||||
- Reset everything
|
||||
```sh
|
||||
docker stop forgejo
|
||||
docker rm forgejo
|
||||
sudo rm -fr /srv/forgejo.old
|
||||
sudo mv /srv/forgejo /srv/forgejo.old
|
||||
bash -x /home/debian/run-forgejo.sh
|
||||
```
|
||||
- `/home/debian/v7.nftables`
|
||||
```
|
||||
add table ip v7;
|
||||
flush table ip v7;
|
||||
add chain ip v7 prerouting {
|
||||
type nat hook prerouting priority 0;
|
||||
policy accept;
|
||||
ip daddr 65.21.67.65 tcp dport { 2070 } dnat to 10.6.83.179;
|
||||
};
|
||||
```
|
||||
- Add to `iface enp5s0 inet static` in `/etc/network/interfaces`
|
||||
```
|
||||
up nft -f /home/debian/v7.nftables
|
||||
```
|
||||
|
||||
```
|
||||
- `/etc/nginx/sites-available/v7.forgejo.org` same as `/etc/nginx/sites-available/code.forgejo.org`
|
||||
|
||||
```
|
||||
|
||||
- `static-pages` on hetzner02
|
||||
|
||||
See [the static pages documenation](../static-pages/) for more information.
|
||||
|
||||
- Unprivileged
|
||||
|
||||
- `runner-forgejo-helm` on hetzner03
|
||||
|
||||
Dedicated to https://codeberg.org/forgejo-contrib/forgejo-helm and running from an ephemeral disk
|
||||
|
||||
## Uberspace
|
||||
|
||||
The website https://forgejo.org is hosted at
|
||||
https://uberspace.de/. The https://codeberg.org/forgejo/website/ CI
|
||||
has credentials to push HTML pages there.
|
||||
Moved permanently to https://code.forgejo.org/infrastructure/documentation#readme.
|
||||
A mirror is available at https://git.pub.solar/forgejo/infrastructure-documentation.
|
||||
|
|
|
|||
Loading…
Reference in a new issue