1
0
Fork 0
mirror of https://codeberg.org/forgejo/forgejo.git synced 2024-11-24 08:57:03 -05:00
forgejo/services/auth/source/oauth2/providers.go

174 lines
5 KiB
Go
Raw Normal View History

Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
// Copyright 2021 The Gitea Authors. All rights reserved.
// SPDX-License-Identifier: MIT
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
package oauth2
import (
"errors"
"net/url"
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
"sort"
2017-03-03 03:21:31 -05:00
2022-01-02 08:12:35 -05:00
"code.gitea.io/gitea/models/auth"
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
"code.gitea.io/gitea/modules/log"
2017-03-03 03:21:31 -05:00
"code.gitea.io/gitea/modules/setting"
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
"github.com/markbates/goth"
)
// Provider is an interface for describing a single OAuth2 provider
type Provider interface {
Name() string
DisplayName() string
IconURL() string
CustomURLSettings() *CustomURLSettings
}
// GothProviderCreator provides a function to create a goth.Provider
type GothProviderCreator interface {
CreateGothProvider(providerName, callbackURL string, source *Source) (goth.Provider, error)
}
// GothProvider is an interface for describing a single OAuth2 provider
type GothProvider interface {
Provider
GothProviderCreator
}
// AuthSourceProvider provides a provider for an AuthSource. Multiple auth sources could use the same registered GothProvider
// So each auth source should have its own DisplayName and IconURL for display.
// The Name is the GothProvider's name, to help to find the GothProvider to sign in.
// The DisplayName is the auth source config's name, site admin set it on the admin page, the IconURL can also be set there.
type AuthSourceProvider struct {
GothProvider
sourceName, iconURL string
}
func (p *AuthSourceProvider) Name() string {
return p.GothProvider.Name()
}
func (p *AuthSourceProvider) DisplayName() string {
return p.sourceName
}
func (p *AuthSourceProvider) IconURL() string {
if p.iconURL != "" {
return p.iconURL
}
return p.GothProvider.IconURL()
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
}
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
// Providers contains the map of registered OAuth2 providers in Gitea (based on goth)
2022-01-02 08:12:35 -05:00
// key is used to map the OAuth2Provider with the goth provider type (also in AuthSource.OAuth2Config.Provider)
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
// value is used to store display data
var gothProviders = map[string]GothProvider{}
// RegisterGothProvider registers a GothProvider
func RegisterGothProvider(provider GothProvider) {
if _, has := gothProviders[provider.Name()]; has {
log.Fatal("Duplicate oauth2provider type provided: %s", provider.Name())
}
gothProviders[provider.Name()] = provider
}
// GetOAuth2Providers returns the map of unconfigured OAuth2 providers
// key is used as technical name (like in the callbackURL)
// values to display
func GetOAuth2Providers() []Provider {
providers := make([]Provider, 0, len(gothProviders))
for _, provider := range gothProviders {
providers = append(providers, provider)
}
sort.Slice(providers, func(i, j int) bool {
return providers[i].Name() < providers[j].Name()
})
return providers
}
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
// GetActiveOAuth2Providers returns the map of configured active OAuth2 providers
// key is used as technical name (like in the callbackURL)
// values to display
func GetActiveOAuth2Providers() ([]string, map[string]Provider, error) {
// Maybe also separate used and unused providers so we can force the registration of only 1 active provider for each type
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
2022-01-02 08:12:35 -05:00
authSources, err := auth.GetActiveOAuth2ProviderSources()
if err != nil {
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
return nil, nil, err
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
}
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
var orderedKeys []string
providers := make(map[string]Provider)
2022-01-02 08:12:35 -05:00
for _, source := range authSources {
oauth2Cfg, ok := source.Cfg.(*Source)
if !ok {
log.Error("Invalid OAuth2 source config: %v", oauth2Cfg)
continue
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
}
gothProv := gothProviders[oauth2Cfg.Provider]
providers[source.Name] = &AuthSourceProvider{GothProvider: gothProv, sourceName: source.Name, iconURL: oauth2Cfg.IconURL}
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
orderedKeys = append(orderedKeys, source.Name)
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
}
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
sort.Strings(orderedKeys)
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
Refactor: Move login out of models (#16199) `models` does far too much. In particular it handles all `UserSignin`. It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in. Therefore we should move this code out of `models`. This code has to depend on `models` - therefore it belongs in `services`. There is a package in `services` called `auth` and clearly this functionality belongs in there. Plan: - [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication. - [x] Move `models.UserSignIn` into `auth` - [x] Move `models.ExternalUserLogin` - [x] Move most of the `LoginVia*` methods to `auth` or subpackages - [x] Move Resynchronize functionality to `auth` - Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files. - [x] Move the rest of the LDAP functionality in to the ldap subpackage - [x] Re-factor the login sources to express an interfaces `auth.Source`? - I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future - [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable - [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2 - [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models. - [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2 - [x] More simplifications of login_source.go may need to be done - Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178 - More refactors...? - OpenID should probably become an auth Method but I think that can be left for another PR - Methods should also probably be cleaned up - again another PR I think. - SSPI still needs more refactors.* Rename auth.Auth auth.Method * Restructure ssh_key.go - move functions from models/user.go that relate to ssh_key to ssh_key - split ssh_key.go to try create clearer function domains for allow for future refactors here. Signed-off-by: Andrew Thornton <art27@cantab.net>
2021-07-24 06:16:34 -04:00
return orderedKeys, providers, nil
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
}
// RegisterProviderWithGothic register a OAuth2 provider in goth lib
func RegisterProviderWithGothic(providerName string, source *Source) error {
provider, err := createProvider(providerName, source)
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
if err == nil && provider != nil {
gothRWMutex.Lock()
defer gothRWMutex.Unlock()
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
goth.UseProviders(provider)
}
return err
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
}
// RemoveProviderFromGothic removes the given OAuth2 provider from the goth lib
func RemoveProviderFromGothic(providerName string) {
gothRWMutex.Lock()
defer gothRWMutex.Unlock()
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
delete(goth.GetProviders(), providerName)
}
// ClearProviders clears all OAuth2 providers from the goth lib
func ClearProviders() {
gothRWMutex.Lock()
defer gothRWMutex.Unlock()
goth.ClearProviders()
}
var ErrAuthSourceNotActivated = errors.New("auth source is not activated")
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
// used to create different types of goth providers
func createProvider(providerName string, source *Source) (goth.Provider, error) {
callbackURL := setting.AppURL + "user/oauth2/" + url.PathEscape(providerName) + "/callback"
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
var provider goth.Provider
var err error
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
p, ok := gothProviders[source.Provider]
if !ok {
return nil, ErrAuthSourceNotActivated
}
provider, err = p.CreateGothProvider(providerName, callbackURL, source)
if err != nil {
return provider, err
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
}
// always set the name if provider is created so we can support multiple setups of 1 provider
if err == nil && provider != nil {
Oauth2 consumer (#679) * initial stuff for oauth2 login, fails on: * login button on the signIn page to start the OAuth2 flow and a callback for each provider Only GitHub is implemented for now * show login button only when the OAuth2 consumer is configured (and activated) * create macaron group for oauth2 urls * prevent net/http in modules (other then oauth2) * use a new data sessions oauth2 folder for storing the oauth2 session data * add missing 2FA when this is enabled on the user * add password option for OAuth2 user , for use with git over http and login to the GUI * add tip for registering a GitHub OAuth application * at startup of Gitea register all configured providers and also on adding/deleting of new providers * custom handling of errors in oauth2 request init + show better tip * add ExternalLoginUser model and migration script to add it to database * link a external account to an existing account (still need to handle wrong login and signup) and remove if user is removed * remove the linked external account from the user his settings * if user is unknown we allow him to register a new account or link it to some existing account * sign up with button on signin page (als change OAuth2Provider structure so we can store basic stuff about providers) * from gorilla/sessions docs: "Important Note: If you aren't using gorilla/mux, you need to wrap your handlers with context.ClearHandler as or else you will leak memory!" (we're using gorilla/sessions for storing oauth2 sessions) * use updated goth lib that now supports getting the OAuth2 user if the AccessToken is still valid instead of re-authenticating (prevent flooding the OAuth2 provider)
2017-02-22 02:14:37 -05:00
provider.SetName(providerName)
}
return provider, err
}