**NOTE:** this example applies to Docker images as well!
On our [downloads page](https://dl.gitea.io/gitea/) you will see a 1.7 directory, as well as directories for 1.7.0, 1.7.1, 1.7.2, 1.7.3, 1.7.4, 1.7.5, and 1.7.6.
The 1.7 and 1.7.0 directories are **not** the same. The 1.7 directory is built on each merged commit to the [`release/v1.7`](https://github.com/go-gitea/gitea/tree/release/v1.7) branch.
The 1.7.0 directory, however, is a build that was created when the [`v1.7.0`](https://github.com/go-gitea/gitea/releases/tag/v1.7.0) tag was created.
This means that 1.x downloads will change as commits are merged to their respective branch (think of it as a separate "master" branch for each release).
On the other hand, 1.x.x downloads should never change.
## Not seeing a clone URL or the clone URL being incorrect
There are a few places that could make this show incorrectly.
1. If using a reverse proxy, make sure you have followed the correction directions in the [reverse proxy guide]({{< relref "doc/usage/reverse-proxies.en-us.md" >}})
2. Make sure you have correctly set `ROOT_URL` in the `server` section of your `app.ini`
If certain clone options aren't showing up (HTTP/S or SSH), the following options can be checked in your `app.ini`
`DISABLE_HTTP_GIT`: if set to true, there will be no HTTP/HTTPS link
`DISABLE_SSH`: if set to true, there will be no SSH link
`SSH_EXPOSE_ANONYMOUS`: if set to false, SSH links will be hidden for anonymous users
## Custom Templates not loading or working incorrectly
Gitea's custom templates must be added to the correct location or Gitea will not find and use them.
The correct path for the template(s) will be relative to the `CustomPath`
1. To find `CustomPath`, look for Custom File Root Path in Site Administration -> Configuration
* If that doesn't exist, you can try `echo $GITEA_CUSTOM`
2. If you are still unable to find a path, the default can be [calculated above](#where-does-gitea-store-x-file)
3. Once you have figured out the correct custom path, you can refer to the [customizing Gitea]({{< relref "doc/advanced/customizing-gitea.en-us.md" >}}) page to add your template to the correct location.
## Active user vs login prohibited user
In Gitea, an "active" user refers to a user that has activated their account via email.
A "login prohibited" user is a user that is not allowed to log in to Gitea anymore
There are multiple things you can combine to prevent spammers.
1. By only whitelisting certain domains with OpenID (see below)
2. Setting `ENABLE_CAPTCHA` to `true` in your `app.ini` and properly configuring `RECAPTCHA_SECRET` and `RECAPTCHA_SITEKEY`
3. Settings `DISABLE_REGISTRATION` to `true` and creating new users via the [CLI]({{< relref "doc/usage/command-line.en-us.md" >}}), [API]({{< relref "doc/advanced/api-usage.en-us.md" >}}), or Gitea's Admin UI
Restricted users are limited to a subset of the content based on their organization/team memberships and collaborations, ignoring the public flag on organizations/repos etc.__
Example use case: A company runs a Gitea instance that requires login. Most repos are public (accessible/browseable by all co-workers).
At some point, a customer or third party needs access to a specific repo and only that repo. Making such a customer account restricted and granting any needed access using team membership(s) and/or collaboration(s) is a simple way to achieve that without the need to make everything private.
Use [Fail2Ban]({{< relref "doc/usage/fail2ban-setup.en-us.md" >}}) to monitor and stop automated login attempts or other malicious behavior based on log patterns
Gitea supports two official themes right now, `gitea` and `arc-green` (`light` and `dark` respectively)
To add your own theme, currently the only way is to provide a complete theme (not just color overrides)
As an example, let's say our theme is `arc-blue` (this is a real theme, and can be found [in this issue](https://github.com/go-gitea/gitea/issues/6011))
Name the `.css` file `theme-arc-blue.css` and add it to your custom folder in `custom/pulic/css`
Allow users to use it by adding `arc-blue` to the list of `THEMES` in your `app.ini`
## SSHD vs built-in SSH
SSHD is the built-in SSH server on most Unix systems.
Gitea also provides its own SSH server, for usage when SSHD is not available.
## Gitea is running slow
The most common culprit for this is loading federated avatars.
This can be turned off by setting `ENABLE_FEDERATED_AVATAR` to `false` in your `app.ini`
Another option that may need to be changed is setting `DISABLE_GRAVATAR` to `true` in your `app.ini`
## Can't create repositories/files
Make sure that Gitea has sufficient permissions to write to its home directory and data directory.
See [AppDataPath and RepoRootPath](#where-does-gitea-store-x-file)
**Note for Arch users:** At the time of writing this, there is an issue with the Arch package's systemd file including this line:
`ReadWritePaths=/etc/gitea/app.ini`
Which makes all other paths non-writeable to Gitea.
## Translation is incorrect/how to add more translations
Our translations are currently crowd-sourced on our [Crowdin project](https://crowdin.com/project/gitea)
Whether you want to change a translation or add a new one, it will need to be there as all translations are overwritten in our CI via the Crowdin integration.
## Hooks aren't running
If Gitea is not running hooks, a common cause is incorrect setup of SSH keys.
See [SSH Issues](#ssh-issues) for more information.
You can also try logging into the administration panel and running the `Resynchronize pre-receive, update and post-receive hooks of all repositories.` option.
## SSH issues
If you cannot reach repositories over `ssh`, but `https` works fine, consider looking into the following.
First, make sure you can access Gitea via SSH.
`ssh git@myremote.example`
If the connection is successful, you should receive an error message like the following:
```
Hi there, You've successfully authenticated, but Gitea does not provide shell access.
If this is unexpected, please log in with password and setup Gitea under another user.
```
If you do not get the above message but still connect, it means your SSH key is **not** being managed by Gitea. This means hooks won't run, among other potential problems.
If you cannot connect at all, your SSH key may not be configured correctly locally.
This is specific to SSH and not Gitea, so will not be covered here.
### SSH Common Errors
```
Permission denied (publickey).
fatal: Could not read from remote repository.
```
This error signifies that the server rejected a log in attempt, check the
following things:
* On the client:
* Ensure the public and private ssh keys are added to the correct Gitea user.
* Make sure there are no issues in the remote url. In particular, ensure the name of the
git user (before the `@`) is spelled correctly.
* Ensure public and private ssh keys are correct on client machine.
* On the server:
* Make sure the repository exists and is correctly named.
* Check the permissions of the `.ssh` directory in the system user's home directory.
* Verify that the correct public keys are added to `.ssh/authorized_keys`.
Try to run `Rewrite '.ssh/authorized_keys' file (for Gitea SSH keys)` on the
Gitea admin panel.
* Read Gitea logs.
* Read /var/log/auth (or similar).
* Check permissions of repositories.
The following is an example of a missing public SSH key where authentication
succeeded, but some other setting is preventing SSH from reaching the correct
repository.
```
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
```
In this case, look into the following settings:
* On the server:
* Make sure that the `git` system user has a usable shell set
* Verify this with `getent passwd git | cut -d: -f7`
*`usermod` or `chsh` can be used to modify this.
* Ensure that the `gitea serv` command in `.ssh/authorized_keys` uses the
correct configuration file.
## Missing releases after migrating repository with tags
To migrate an repository *with* all tags, you need to do two things:
* Push tags to the repository:
```
git push --tags
```
* (Re-)sync tags of all repositories within Gitea:
Check that you have proper access to the repository
error: failed to push some refs to '<GIT_REPO_URL>'
```
Check the value of `LFS_HTTP_AUTH_EXPIRY` in your `app.ini` file.
By default, your LFS token will expire after 20 minutes. If you have a slow connection or a large file (or both), it may not finish uploading within the time limit.
You may want to set this value to `60m` or `120m`.
Gitea provides a sub-command `gitea migrate` to initialize the database, after which you can use the [admin CLI commands]({{< relref "doc/usage/command-line.en-us.md#admin" >}}) to add users like normal.
## How can I enable password reset
There is no setting for password resets. It is enabled when a [mail service]({{< relref "doc/usage/email-setup.en-us.md" >}}) is configured, and disabled otherwise.
## How can a user's password be changed
- As an **admin**, you can change any user's password (and optionally force them to change it on next login)...
- By navigating to your `Site Administration -> User Accounts` page and editing a user.
- By using the [admin CLI commands]({{< relref "doc/usage/command-line.en-us.md#admin" >}}).
Keep in mind most commands will also need a [global flag]({{< relref "doc/usage/command-line.en-us.md#global-options" >}}) to point the CLI at the correct configuration.
- As a **user** you can change it...
- In your account `Settings -> Account` page (this method **requires** you to know your current password).
- By using the `Forgot Password` link.
If the `Forgot Password/Account Recovery` page is disabled, please contact your administrator to configure a [mail service]({{< relref "doc/usage/email-setup.en-us.md" >}}).
In Gitea version `1.11` we moved to [goldmark](https://github.com/yuin/goldmark) for markdown rendering, which is [CommonMark](https://commonmark.org/) compliant.
If you have markdown that worked as you expected prior to version `1.11` and after upgrading it's not working anymore, please look through the CommonMark spec to see whether the problem is due to a bug or non-compliant syntax.
If it is the latter, _usually_ there is a compliant alternative listed in the spec.
If you are receiving errors on upgrade of Gitea using MySQL that read:
> `ORM engine initialization failed: migrate: do migrate: Error: 1118: Row size too large...`
Please run `gitea convert` or run `ALTER TABLE table_name ROW_FORMAT=dynamic;` for each table in the database.
The underlying problem is that the space allocated for indices by the default row format
is too small. Gitea requires that the `ROWFORMAT` for its tables is `DYNAMIC`.
If you are receiving an error line containing `Error 1071: Specified key was too long; max key length is 1000 bytes...`
then you are attempting to run Gitea on tables which use the ISAM engine. While this may have worked by chance in previous versions of Gitea, it has never been officially supported and
you must use InnoDB. You should run `ALTER TABLE table_name ENGINE=InnoDB;` for each table in the database.
## Why Are Emoji Broken On MySQL
Unfortunately MySQL's `utf8` charset does not completely allow all possible UTF-8 characters, in particular Emoji.
They created a new charset and collation called `utf8mb4` that allows for emoji to be stored but tables which use
the `utf8` charset, and connections which use the `utf8` charset will not use this.
Please run `gitea convert`, or run `ALTER DATABASE database_name CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;`
for the database_name and run `ALTER TABLE table_name CONVERT TO CHARACTER SET utf8mb4 COLLATE utf8mb4_general_ci;`
for each table in the database.
You will also need to change the app.ini database charset to `CHARSET=utf8mb4`.
