- Don't double escape the 'Delete branch "$BRANCH"' text. `Locale.Tr`
escapes the argument already and Vue does too by default.
- Let Vue escape the text and add a unit test ensuring that it escapes.
- Resolves #5582
(cherry picked from commit 8c8b31f304)
Fix #13489
In the original implementation, only `All` will display your owned and
collaborated repositories. For other filters like `Source`, `Mirrors`
and etc. will only display your owned repositories.
This PR removed the limitations. Now except `collbrations`, other
filters will always display your owned and collaborated repositories.
(cherry picked from commit 4947bec8360c152daca23e120eae1732d3848492)
When pasting a URL over another URL, replace the URL instead of creating
a useless `[url](url)`.
(Partially picked from commit 55502265716f000a2c61c98fa093244e1310d97f)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Just 4 validations and I specifically tested this by
selecting/unselecting issue labels.
Co-authored-by: Giteabot <teabot@gitea.io>
---
Clean port. Fixed two additional warnings
(cherry picked from commit 3a7454df7a518f810fbeb34b9d784e7c29d173ff)
- Tell webpack to chunk the swagger-ui dependency, so it can be re-used for the
forgejo-swagger.js and swagger.js files (these two files are two
seperate javascript files in the output).
- This saves off 400KB when Forgejo is built with the `bindata` build
tag.
UX/Translation changes:
- new teams: remove redundant tooltips that don't add meaningful information
- move general information to table fieldset
- new teams: rename "general" to "custom" access for clarity
- new teams: show labels beside options on mobile
Accessibility:
- semantic form elements allow easier navigation (fieldset, mostly)
- improve better labelling of new teams table
- fix accessibility scan issues
- TODO: the parts that "disable" form elements were not yet touched and
are not really accessible to screenreaders
Technical:
- replace two JavaScript solutions with one CSS standard
- implement a simpler grid (.simple-grid)
- simplify markup
- remove some webhook settings specific CSS
Testing:
- check more form content for accessibility issues
- but exclude tooltips from the scan :(
- reuse existing form tests from previous PR
Modifies forms:
- (new) org team
- (new) repo webhook
- (new) repo protected branch
The forms are not completely rewritten to semantic HTML yet. The focus
of this change was on standard elements, some custom solutions were left
untouched for now.
- swaps the order fo permission radio buttons as per https://codeberg.org/forgejo/forgejo/issues/4983
- uses fieldsets to group related inputs
- ensures consistent styling across forms
- can be improved later, e.g. using horizontal lines between sections
- fixes: previous font size of labels was smaller than the font size of the help text
- help text are now part of the label, clicking them now also activates the input
- drop unused CSS (no required checkboxes in grouped class remain)
- playwright testing:
- move login boilerplate to utils
- automated form accessibility checking
- allow defining the scope, because legacy parts of the forms are not yet accessible
- assert some CSS properties that should not be overriden
- the Makefile adjustment was necessary, because eslint scanned some internal files in the tests/e2e/reports directory
- Regression of #4571
- We aren't showing the ticks generated by chartjs, because we want to
show the avatar of the person instead. You can't *realy* disable that
tick, so instead I opted to make them transparent in #4571, however they
still affected the generation of ticks so if enough authors were being
shown, for some the ticks were being skipped. Adjust the settings to
make sure they are always being shown.
- Resolves https://codeberg.org/forgejo/forgejo/issues/4982
When a long line with characters such as dots is returned by a step in
an action (e.g. by the output of the Ruby on Rails test runner), it
overflows the log container, causing the page to scroll sideways.
This PR adds the CSS `overflow-wrap: anywhere;` to the
`.job-step-section .job-step-logs .job-log-line .log-msg` selector,
which causes such lines to wrap as well
(cherry picked from commit 61aaf3440142d225802e3e9ce3db28bcf71f5a7e)
- Existing gear icon keyup handler fixed:
moved the handler onto its descendant button,
to prevent it from incorrectly firing on the check-box elements
- Check-box elements: keyup elements for space and enter added,
as well as tabindex elements to make them able to gain focus
<!--
Before submitting a PR, please read the contributing guidelines:
https://codeberg.org/forgejo/forgejo/src/branch/forgejo/CONTRIBUTING.md
-->
To test the check boxes:
- Set up an action, and visit the action's job page
- Navigate onto the job container (via Tab et al.)
- Use the gear icon with Space or Enter
- Tick the check-box items with Space or Enter
To test the elements beside the chevron icons:
- Navigate onto the element via Tab et al.
- Open/close them via Space or Enter
I have not had a chance to test the latter fix (https://codeberg.org/forgejo/forgejo/issues/4476#issuecomment-2092312) myself yet; feel free to reject this one in case the latter fix does not work as it should, and I will break this up into two separate pull requests.
<!--start release-notes-assistant-->
## Draft release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- User Interface bug fixes
- [PR](https://codeberg.org/forgejo/forgejo/pulls/4490)</a>: <!--number 4490 --><!--line 0 --><!--description W2FjY2Vzc2liaWxpdHldIEFkZCBrZXlib2FyZCBzdXBwb3J0IGZvciB0ZXN0IGFjdGlvbnM=-->[accessibility] Add keyboard support for test actions<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4490
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: banaanihillo <banaanihillo@noreply.codeberg.org>
Co-committed-by: banaanihillo <banaanihillo@noreply.codeberg.org>
- The usage of the `vue-bar-graph` is complicated, because of the `GSAP`
dependency they pull in, the dependency uses a non-free license.
- The code is rewritten to use the `chart.js` library, which is already
used to draw other charts in the activity tab. Due to the limitation of
`chart.js`, we have to create a plugin in order to have images as labels
and do click handling for those images.
- The chart isn't the same as the previous one, once again simply due to
how `chart.js` works, the amount of commits isn't drawn anymore in the
bar, you instead have to hover over it or look at the y-axis.
- Resolves #4569
- Currently if you want to update the milestone of an issue or pull
request, your whole page will be reloaded to reflect the newly set
milestone. This is quite unecessary, as only the milestone text is
updated and a new timeline event is added.
- This patch converts the milestone section in the issue/pull request
sidebar to use HTMX, so it becomes a progressive element and avoids
reloading the whole page to update the milestone.
- The update of the milestone section itself is quite straightforward
and nothing special is happening. To support adding new timeline events,
a new element `#insert-timeline` is conviently placed after the last
timeline event, which can be used with
[`hx-swap-oob`](https://htmx.org/attributes/hx-swap-oob/) to position
new timeline events before that element.
- Adds E2E test.
- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
Add an empty hash `href="#"` attribute to anchors that did not yet have any `href` attribute, as a quick work-around to make those elements possible to interact with via keyboard. See discussion on linked issue (https://codeberg.org/forgejo/forgejo/issues/4273) for more information on how the button-like elements like this could eventually be improved even more.
Fixes https://codeberg.org/forgejo/forgejo/issues/4273.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4375
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: banaanihillo <banaanihillo@noreply.codeberg.org>
Co-committed-by: banaanihillo <banaanihillo@noreply.codeberg.org>
It is entirely possible that the difference between the specified
sleep time and the actual sleep time is greater than 15 seconds.
https://developer.mozilla.org/en-US/docs/Web/API/setTimeout#Notes
> Note that in either case, the actual delay may be longer than
> intended; see Reasons for delays longer than specified below.
It is however an error for the delay to be shorter.
⎯⎯⎯⎯⎯⎯⎯ Failed Tests 1 ⎯⎯⎯⎯⎯⎯⎯
FAIL web_src/js/utils.test.js > sleep
AssertionError: expected false to be truthy
❯ testSleep web_src/js/utils.test.js:192:48
190| const endTime = Date.now(); // Record the end time
191| const actualSleepTime = endTime - startTime;
192| expect(Math.abs(actualSleepTime - ms) <= 15).toBeTruthy();
| ^
193| }
194|
❯ web_src/js/utils.test.js:184:3
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
#4059 was unfortunately incomplete: some custom_url fields are currently shown, even if they are not used by the provider. Moreover the `Use Custom URLs Instead of Default URLs` is always checked by default.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `GitLab`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially unchecked**
- enable the `Use Custom URLs Instead of Default URLs` checkbox
- verify that only the fields "Authorize", "Token" and "Profile" URLs are shown (no "Email URL", nor "Tenant").
- Switch the `OAuth2 provider` to `Azure AD v2`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially checked**
- verify that only the field "Tenant" is shown (with the default "organizations").
Note: this is loosely based on the upstream fix https://github.com/go-gitea/gitea/pull/31246 which I initially overlooked.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4194
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
While trying to understand #1236, I was quite confused not to see the `Use Custom URLs` checkbox.
This checkbox disappeared in b95a893b22 (because `getElementById` does not expect a `#` as first char), fixed in 4e816e1326.
After solving this, switching from `Nextcloud` to `OpenID Connect` triggered a JS error, which is addressed in 3efa4d836a.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `Nextcloud`
- check that the `Use Custom URLs Instead of Default URLs` checkbox toggles the fields below
- let the checkbox be checked
- Switch the `OAuth2 provider` to `OpenID Connect`
- ensure that no JS error is shown
- Switch the `OAuth2 provider` to `Mastodon`
- check that the fields below `Use Custom URLs Instead of Default URLs` have the right defaults (mastodon.social)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4059
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
