More details are in PR message.
Changes applied:
* replace `Err_Services` with more specific `Err_DisabledRegistration`
* highlight the self-registration option instead of services section
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4063
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
This is a PR for #3616
Currently added a new optional config `SLOGAN` in ini file. When this config is set title page is modified in APP_NAME [ - SLOGAN]
Example in image below
Add the new config value in the admin settings page (readonly)
## TODO
* [x] Add the possibility to add the `SLOGAN` config from the installation form
* [ ] Update https://forgejo.org/docs/next/admin/config-cheat-sheet
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3752
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: mirko <mirko.perillo@gmail.com>
Co-committed-by: mirko <mirko.perillo@gmail.com>
When installing Forgejo via the on-line installer, force
DisableRegistration to true, to discourage creating instances with open
registration. Because open registration requires constant vigil to fight
off spammers of all kinds, it is not a great default. It should be a
conscious decision. This change is made in an effort to make the choice
of running an instance with open registration a conscious choice, rather
than simply the default.
Partially addresses #3925.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Fix #30923
(cherry picked from commit effb405cae88474c27f5c8322a2627019af1cf64)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Conflicts:
- modules/setting/oauth2.go
Conflicted due to different ways of logging. Since the log
message is removed anyway, resolved by removing it.
- modules/setting/oauth2_test.go
Manually copied the test added by Gitea.
- routers/install/install.go
Not a conflict per se, but adjusted to use NewJwtSecret().
Since `modules/context` has to depend on `models` and many other
packages, it should be moved from `modules/context` to
`services/context` according to design principles. There is no logic
code change on this PR, only move packages.
- Move `code.gitea.io/gitea/modules/context` to
`code.gitea.io/gitea/services/context`
- Move `code.gitea.io/gitea/modules/contexttest` to
`code.gitea.io/gitea/services/contexttest` because of depending on
context
- Move `code.gitea.io/gitea/modules/upload` to
`code.gitea.io/gitea/services/context/upload` because of depending on
context
(cherry picked from commit 29f149bd9f517225a3c9f1ca3fb0a7b5325af696)
Conflicts:
routers/api/packages/alpine/alpine.go
routers/api/v1/repo/issue_reaction.go
routers/install/install.go
routers/web/admin/config.go
routers/web/passkey.go
routers/web/repo/search.go
routers/web/repo/setting/default_branch.go
routers/web/user/home.go
routers/web/user/profile.go
tests/integration/editor_test.go
tests/integration/integration_test.go
tests/integration/mirror_push_test.go
trivial context conflicts
also modified all other occurrences in Forgejo specific files
Fixes #27188.
Introduces a check on the installation that tries to parse the FROM
address. If it fails, shows a new error message to the user.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
(cherry picked from commit 6f6120dfa8d549d0b866eeb9317054fea831c844)
Conflicts:
options/locale/locale_en-US.ini
context
- Remove non base64-ed version of JWT secret generation. Because all
occurences need the Base64 version.
(cherry picked from commit 6a6b5a31a8)
(cherry picked from commit 066b8ca6b4)
- Resolves #271
- Ensure that the adminstrator password is at least `MIN_PASSWORD_LENGTH`.
(cherry picked from commit 28cb04c3f5)
(cherry picked from commit 95371ebd92)
(cherry picked from commit a134288ab6)
(cherry picked from commit 4202f052cb)
(cherry picked from commit 510b7467d3)
(cherry picked from commit f3a6e1f121)
(cherry picked from commit f340508819)
(cherry picked from commit b891bb176d)
(cherry picked from commit 1a1bfc38cc)
(cherry picked from commit 083d5aefed)
(cherry picked from commit 4586096be9)
(cherry picked from commit 039fa20cc8)
(cherry picked from commit 3ec9cb5f59)
(cherry picked from commit 00be0eee37)
(cherry picked from commit a156603002)
(cherry picked from commit 4d305e7774)
(cherry picked from commit 51e8f21202)
(cherry picked from commit 58e354c98e)
(cherry picked from commit 20405564f5)
(cherry picked from commit 1d7f495683)
(cherry picked from commit d457b9c911)
(cherry picked from commit 72b54bc4cc)
(cherry picked from commit d7ce723e35)
(cherry picked from commit ce5f863d5d)
(cherry picked from commit 324b9318ac)
(cherry picked from commit fff11fc535)
(cherry picked from commit d3fa04aa69)
(cherry picked from commit d3b24691f3)
(cherry picked from commit 736dfab3ae)
(cherry picked from commit 8be95ef7f4)
(cherry picked from commit 0ce04d93a8)
Replaces `Gitea` with `Forgejo` in the default config settings for new installs.
This will not affect existing installs.
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/140
Co-authored-by: Caesar Schinas <caesar@noreply.codeberg.org>
Co-committed-by: Caesar Schinas <caesar@noreply.codeberg.org>
(cherry picked from commit ca1319aa16)
(cherry picked from commit 52a4d238a0)
(cherry picked from commit f63536538c)
Conflicts:
web_src/js/features/install.js
(cherry picked from commit 861cc434e1)
(cherry picked from commit 0e6ea60c80)
(cherry picked from commit 0cbc0ec15d)
(cherry picked from commit 3cc19b0ae2)
(cherry picked from commit 50fcb885fe)
(cherry picked from commit f6039d4df4)
(cherry picked from commit 5ae5c6ba2d)
(cherry picked from commit f0b565e0ed)
(cherry picked from commit adbd4d2015)
(cherry picked from commit d26c540ffd)
(cherry picked from commit 6df6781b42)
(cherry picked from commit b6fb56e1c4)
(cherry picked from commit bb4f98a0ca)
(cherry picked from commit 6779229f27)
(cherry picked from commit c216c85aee)
(cherry picked from commit dff780bced)
(cherry picked from commit 4e036aa3b6)
(cherry picked from commit 8b3bc3e8a6)
(cherry picked from commit 1e4d852332)
(cherry picked from commit 07a15d1844)
(cherry picked from commit fb44b3e10d)
(cherry picked from commit b212d83319)
(cherry picked from commit 5754971be5)
(cherry picked from commit 0c43b4e82c)
Conflicts:
routers/install/install.go
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 2e22a7208a)
(cherry picked from commit 676b0a8a48)
(cherry picked from commit bc4a8bf9bc)
(cherry picked from commit 5e09a4e174)
(cherry picked from commit 712c52a32a)
(cherry picked from commit ba3d93cc4a)
(cherry picked from commit a5a0396abc)
(cherry picked from commit 09b205f30b)
(cherry picked from commit 52b7729e86)
(cherry picked from commit bfe78735e8)
(cherry picked from commit 915c4f7a7b)
(cherry picked from commit 3b1af856bb)
(cherry picked from commit ffe2c0a353)
(cherry picked from commit fd5cc72128)
(cherry picked from commit 95d3555e47)
(cherry picked from commit b9b853f4b0)
(cherry picked from commit 967453eb6f)
(cherry picked from commit 3298f502dd)
(cherry picked from commit 3481d1f816)
(cherry picked from commit 7508c24a0c)
(cherry picked from commit 54e97f7c35)
(cherry picked from commit 492876992f)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
(cherry picked from commit c73ac63696)
(cherry picked from commit 747a176048)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
Closes #27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The web context (modules/context.Context) is quite complex, it's
difficult for the callers to initialize correctly.
This PR introduces a `NewWebContext` function, to make sure the web
context have the same behavior for different cases.
Before:
* `{{.locale.Tr ...}}`
* `{{$.locale.Tr ...}}`
* `{{$.root.locale.Tr ...}}`
* `{{template "sub" .}}`
* `{{template "sub" (dict "locale" $.locale)}}`
* `{{template "sub" (dict "root" $)}}`
* .....
With context function: only need to `{{ctx.Locale.Tr ...}}`
The "ctx" could be considered as a super-global variable for all
templates including sub-templates.
To avoid potential risks (any bug in the template context function
package), this PR only starts using "ctx" in "head.tmpl" and
"footer.tmpl" and it has a "DataRaceCheck". If there is anything wrong,
the code can be fixed or reverted easily.
Replace #25580
Fix #19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
In modern days, there is no reason to make users set "charset" anymore.
Close #25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
If the APP_DATA_PATH isn't written into the config when installing, then
its value is uncertain because some Gitea command doesn't run with
correct WorkPath.
This is a quick fix for #25330 and can be backported.
Follow up #22405
Fix #20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The INI package has many bugs and quirks, and in fact it is
unmaintained.
This PR is the first step for the INI package refactoring:
* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
Fix #24856
Rename "context.contextKey" to "context.WebContextKey", this context is
for web context only. But the Context itself is not renamed, otherwise
it would cause a lot of changes (if we really want to rename it, there
could be a separate PR).
The old test code doesn't really test, the "install page" gets broken
not only one time, so use new test code to make sure the "install page"
could work.
Replace #16455
Close #21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
Partially for #24457
Major changes:
1. The old `signedUserNameStringPointerKey` is quite hacky, use
`ctx.Data[SignedUser]` instead
2. Move duplicate code from `Contexter` to `CommonTemplateContextData`
3. Remove incorrect copying&pasting code `ctx.Data["Err_Password"] =
true` in API handlers
4. Use one unique `RenderPanicErrorPage` for panic error page rendering
5. Move `stripSlashesMiddleware` to be the first middleware
6. Install global panic recovery handler, it works for both `install`
and `web`
7. Make `500.tmpl` only depend minimal template functions/variables,
avoid triggering new panics
Screenshot:
<details>
</details>
The old `HTMLRender` is not ideal.
1. It shouldn't be initialized multiple times, it consumes a lot of
memory and is slow.
2. It shouldn't depend on short-lived requests, the `WatchLocalChanges`
needs a long-running context.
3. It doesn't make sense to use FuncsMap slice.
HTMLRender was designed to only work for GItea's specialized 400+
templates, so it's good to make it a global shared instance.
Close #24062
At the beginning, I just wanted to fix the warning mentioned by #24062
But, the cookie code really doesn't look good to me, so clean up them.
Complete the TODO on `SetCookie`:
> TODO: Copied from gitea.com/macaron/macaron and should be improved
after macaron removed.
Replace #23350.
Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.
To avoid mismatching between `Type` and `UseXXX`.
This refactor can fix the bug mentioned in #23350, so it should be
backported.
## TLDR
* Fix the broken page / broken image problem when click "Install"
* Close #20089
* Fix the Password Hash Algorithm display problem for #22942
* Close #23183
* Close #23184
## Details
### The broken page / broken image problem when click "Install"
(Redirect failed after install gitea #23184)
Before: when click "install", all new requests will fail, because the
server has been restarted. Users just see a broken page with broken
images, sometimes the server is not ready but the user would have been
redirect to "/user/login" page, then the users see a new broken page
(connection refused or something wrong ...)
After: only check InstallLock=true for necessary handlers, and sleep for
a while before restarting the server, then the browser has enough time
to load the "post-install" page. And there is a script to check whether
"/user/login" is ready, the user will only be redirected to the login
page when the server is ready.
### During new instance setup make 'Gitea Base URL' filled from
window.location.origin #20089
If the "app_url" input contains `localhost` (the default value from
config), use current window's location href as the `app_url` (aka
ROOT_URL)
### Fix the Password Hash Algorithm display problem for "Provide the
ability to set password hash algorithm parameters #22942"
Before: the UI shows `pbkdf2$50000$50`
<details>
</details>
After: the UI shows `pbkdf2`
<details>
</details>
### GET data: net::ERR_INVALID_URL #23183
Cause by empty `data:` in `<link rel="manifest"
href="data:{{.ManifestData}}">`
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.
- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.
Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
This PR refactors and improves the password hashing code within gitea
and makes it possible for server administrators to set the password
hashing parameters
In addition it takes the opportunity to adjust the settings for `pbkdf2`
in order to make the hashing a little stronger.
The majority of this work was inspired by PR #14751 and I would like to
thank @boppy for their work on this.
Thanks to @gusted for the suggestion to adjust the `pbkdf2` hashing
parameters.
Close #14751
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
To avoid duplicated load of the same data in an HTTP request, we can set
a context cache to do that. i.e. Some pages may load a user from a
database with the same id in different areas on the same page. But the
code is hidden in two different deep logic. How should we share the
user? As a result of this PR, now if both entry functions accept
`context.Context` as the first parameter and we just need to refactor
`GetUserByID` to reuse the user from the context cache. Then it will not
be loaded twice on an HTTP request.
But of course, sometimes we would like to reload an object from the
database, that's why `RemoveContextData` is also exposed.
The core context cache is here. It defines a new context
```go
type cacheContext struct {
ctx context.Context
data map[any]map[any]any
lock sync.RWMutex
}
var cacheContextKey = struct{}{}
func WithCacheContext(ctx context.Context) context.Context {
return context.WithValue(ctx, cacheContextKey, &cacheContext{
ctx: ctx,
data: make(map[any]map[any]any),
})
}
```
Then you can use the below 4 methods to read/write/del the data within
the same context.
```go
func GetContextData(ctx context.Context, tp, key any) any
func SetContextData(ctx context.Context, tp, key, value any)
func RemoveContextData(ctx context.Context, tp, key any)
func GetWithContextCache[T any](ctx context.Context, cacheGroupKey string, cacheTargetID any, f func() (T, error)) (T, error)
```
Then let's take a look at how `system.GetString` implement it.
```go
func GetSetting(ctx context.Context, key string) (string, error) {
return cache.GetWithContextCache(ctx, contextCacheKey, key, func() (string, error) {
return cache.GetString(genSettingCacheKey(key), func() (string, error) {
res, err := GetSettingNoCache(ctx, key)
if err != nil {
return "", err
}
return res.SettingValue, nil
})
})
}
```
First, it will check if context data include the setting object with the
key. If not, it will query from the global cache which may be memory or
a Redis cache. If not, it will get the object from the database. In the
end, if the object gets from the global cache or database, it will be
set into the context cache.
An object stored in the context cache will only be destroyed after the
context disappeared.
Change all license headers to comply with REUSE specification.
Fix #16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Fix https://github.com/go-gitea/gitea/issues/21666
Caused by https://github.com/go-gitea/gitea/pull/19663
Before: when install, the INTERNAL_TOKEN was always generated and saved.
But the internal token may be already there by INTERNAL_TOKEN_URI
After: INTERNAL_TOKEN_URI file must be non-empty. When install, skip
internal token generation if the token exists.
The recovery, API, Web and package frameworks all create their own HTML
Renderers. This increases the memory requirements of Gitea
unnecessarily with duplicate templates being kept in memory.
Further the reloading framework in dev mode for these involves locking
and recompiling all of the templates on each load. This will potentially
hide concurrency issues and it is inefficient.
This PR stores the templates renderer in the context and stores this
context in the NormalRoutes, it then creates a fsnotify.Watcher
framework to watch files.
The watching framework is then extended to the mailer templates which
were previously not being reloaded in dev.
Then the locales are simplified to a similar structure.
Fix #20210
Fix #20211
Fix #20217
Signed-off-by: Andrew Thornton <art27@cantab.net>
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Refactor `i18n` to `locale`
- Currently we're using the `i18n` variable naming for the `locale`
struct. This contains locale's specific information and cannot be used
for general i18n purpose, therefore refactoring it to `locale` makes
more sense.
- Ref: https://github.com/go-gitea/gitea/pull/20096#discussion_r906699200
* Update routers/install/install.go
