Backport #30175 by @jmlt2002
- Inline math blocks couldn't be preceeded or succeeded by
alphanumerical characters due to changes introduced in PR #21171.
Removed the condition that caused this (precedingCharacter condition)
and added a new exit condition of the for-loop that checks if a specific
'$' was escaped using '\' so that the math expression can be rendered as
intended.
- Additionally this PR fixes another bug where math blocks of the type
'$xyz$abc$' where the dollar sign was not escaped by the user, generated
an error (shown in the screenshots below)
- Altered the tests to accomodate for the changes
Former behaviour (from try.gitea.io):
Fixed behaviour (from my local build):
(Edit) Source code for the README.md file:
```
$x$ -$x$ $x$-
a$xa$ $xa$a 1$xb$ $xb$1
$a a$b b$
a$b $a a$b b$
$a a\$b b$
```
Signed-off-by: João Tiago <joao.leal.tintas@tecnico.ulisboa.pt>
Co-authored-by: João Tiago <114936010+jmlt2002@users.noreply.github.com>
(cherry picked from commit 5123ed31914f704348c0660468a3707011f5a160)
- Backport of #2403
- In markdown, links are proccessed to be made absolute against the
relevant base in that context. Such that `./src` will be transformed
into `http://example.com/owner/repo/src/branch/main/src`.
- Don't try to make the link absolute if the link has a schema that's
defined in `[markdown].CUSTOM_URL_SCHEMES`, because they can't be made
absolute and doing so could lead to problems (see test case, double
slash was transformed to single slash).
- Adds unit test.
- Resolves https://codeberg.org/Codeberg/Community/issues/1489
(cherry picked from commit 65b9a959b8)
- Backport of #2385
- For regular non-image nonvideo links, they should be made relative,
this was done against `r.Ctx.Links.Base`, but since 637451a45e, that
should instead be done by `SrcLink()` if there's branch information set
in the context, because branch and treepath information are no longer
set in `r.Ctx.Links.Base`.
- This is consistent with how #2166 _fixed_ relative links.
- Media is not affected, `TestRender_Media` test doesn't fail.
- Adds unit tests.
- Ref https://codeberg.org/Codeberg/Community/issues/1485
(cherry picked from commit a2442793d2)
- Backport of #2276
- It's possible that the description of an `Regularlink` is `Text` and not
another `Regularlink`. Therefor if it's `Text`, convert it to an
`Regularlink` trough the 'old' behavior (pass it trough `org.String` and
trim `file:` prefix).
- Adds unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1430
(cherry picked from commit 385fc6ee6b)
- Backport of #2166
- Relative links were not properly being rendered, because the links
were being made absolute against the repository URL instead of
repository URL + /src/branch, which leads to incorrect links.
- Restore the 'old' behaviour. When there's branch information, that
should be used as base for links.
- Adjusts the test cases.
- Regression of 637451a45e
- Resolves https://codeberg.org/Codeberg/Community/issues/1411
(cherry picked from commit 0e9d52e291)
Backport #26745
Fixes #26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
(cherry picked from commit 022552d5b6)
Backport #28454 (the only conflict is caused by some comments)
* Close #24483
* Close #28123
* Close #23682
* Close #23149
(cherry picked from commit a3f403f438)
Conflicts:
modules/setting/ui.go
trivial context conflict
It will determine how anchors are created and will break existing
links otherwise.
Adapted from Revert "Make `user-content-* ` consistent with github (#26388)
- Currently the repository description uses the same sanitizer as a
normal markdown document. This means that element such as heading and
images are allowed and can be abused.
- Create a minimal restricted sanitizer for the repository description,
which only allows what the postprocessor currently allows, which are
links and emojis.
- Added unit testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1202
- Resolves https://codeberg.org/Codeberg/Community/issues/1122
(cherry picked from commit a8afa4cd18)
(cherry picked from commit 0238587c51)
(cherry picked from commit a8c7bbf728)
(cherry picked from commit 80e05a8245)
(cherry picked from commit f5af5050b3)
(cherry picked from commit 608f981e55)
(cherry picked from commit 6591867502)
(cherry picked from commit b7e6dedafd)
(cherry picked from commit 1cd196da49)
(cherry picked from commit 4c74fd4a04)
- In org mode you can specify an description for media via the following
syntax `[[description][media link]]`. The description is then used as
title or alt.
- This patch fixes the rendering of the description by seperating the
description and non-description cases and using `org.String()`.
- Added unit tests.
- Inspired by
6eb20dbda9/org/html_writer.go (L406-L427)
- Resolves https://codeberg.org/Codeberg/Community/issues/848
(cherry picked from commit 8b8aab8311)
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Currently the post processing will transform all issue indexes (such as `#6`) into a clickable link.
- This makes sense in an situation like issues or PRs,
where referencing to other issues is quite common
and only referencing their issue index is an handy and efficient way to do it.
- Currently this is also run for documents
(which is the user profile and viewing rendered files),
but in those situations it's less common to reference issues by their index and instead could mean something else.
- This patch disables this post processing for issue index for documents. Matches Github's behavior.
- Added unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1120
Co-authored-by: Gusted <postmaster@gusted.xyz>
Regression: https://github.com/go-gitea/gitea/pull/24805
Closes: #25945
- Disallow `javascript`, `vbscript` and `data` (data uri images still
work) url schemes even if all other schemes are allowed
- Fixed older `cbthunderlink` tests
---------
Co-authored-by: delvh <dev.lh@web.de>
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
Fixes #25160.
`data-source-position` of checkboxes in a task list was incorrect
whenever there was YAML front matter. This would result in issue content
or PR descriptions getting corrupted with random `x` or space characters
when a user checked or unchecked a task.
This change makes the CSS for `<video>` in markup match that of `<img>`,
and also allows additional attributes to be used. This way the width,
padding, alignment should work equally well for both.
The old code has a lot of technical debts, eg: `repo/wiki/view.tmpl` /
`Iterate`
This PR improves the Wiki TOC display and improves the code.
---------
Co-authored-by: delvh <dev.lh@web.de>
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.
Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.
Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.
## ⚠️ BREAKING ⚠️
The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This branch continues the work of #23092 and attempts to rid the
codebase of any `nil` contexts when using a `RenderContext`.
Anything that renders markdown or does post processing may call
`markup.sha1CurrentPatternProcessor()`, and this runs
`git.OpenRepository()`, which needs a context. It will panic if the
context is `nil`. This branch attempts to _always_ include a context
when creating a `RenderContext` to prevent future crashes.
Co-authored-by: Kyle D <kdumontnu@gmail.com>
As you can imagine, for the Blender development process it is rather
nice to be able to include videos in issues, pull requests, etc.
This PR allows the `<video>` HTML tag to be used in MarkDown, with the
`src`, `autoplay`, and `controls` attributes.
## Help Needed
To have this fully functional, personally I feel the following things
are still missing, and would appreciate some help from the Gitea team.
### Styling
Some CSS is needed, but I couldn't figure out which of the LESS files
would work. I tried `web_src/less/markup/content.less` and
`web_src/less/_base.less`, but after running `make` the changes weren't
seen in the frontend.
This I would consider a minimal set of CSS rules to be applied:
```css
video {
max-width: 100%;
max-height: 100vh;
}
```
### Default Attributes
It would be fantastic if Gitea could add some default attributes to the
`<video>` tag. Basically `controls` should always be there, as there is
no point in disallowing scrolling through videos, looping them, etc.
### Integration with the attachments system
Another thing that could be added, but probably should be done in a
separate PR, is the integration with the attachments system. Dragging in
a video should attach it, then generate the appropriate MarkDown/HTML.
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.
- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.
Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
These functions don't examine contents, just filenames, so they don't
fit in well in a markup module.
This was originally part of
https://github.com/go-gitea/gitea/pull/22177.
Signed-off-by: Nick Guenther <nick.guenther@polymtl.ca>
Fixes #22628
This PR adds cross references for commits by using the format
`owner/repo@commit` . References are rendered like
[go-gitea/lgtm@6fe88302](#dummy).
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When using an external renderer, STDOUT is expected to be HTML. But
anything written to STDERR is currently ignored. In cases where the
renderer fails, I would like to log any error messages that the external
program outputs to STDERR.
- Remove code that isn't being used.
Found this is my stash from a few weeks ago, not sure how I found this
in the first place.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Change all license headers to comply with REUSE specification.
Fix #16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Previously mentioning a user would link to its profile, regardless of
whether the user existed. This change tests if the user exists and only
if it does - a link to its profile is added.
* Fixes #3444
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
It distractingly shows up on unit tests
* Looks like a leftover from #20571
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
