Backport #27555 by @wolfogre
It should be OK to increase the default queue length since the default
type is "level".
IMO, the old default length (100) is a little too small. See
https://github.com/go-gitea/gitea/issues/27540#issuecomment-1754269491
IIRC, a larger length could lead to more memory usage only when the type
is "channel," but it's an obscure case. Otherwise, it's just a limit
(for "level" or "redis").
Co-authored-by: Jason Song <i@wolfogre.com>
Backport #27543 by @wxiaoguang
Fix #27541
The INI package has a quirk: by default, the keys are inherited.
When maintaining the keys, the newly added sub key should not be
affected by the parent key.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #27000 by @wxiaoguang
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #27400 by @fantognazza
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
This feature was removed by #22219 to avoid possible CSRF attack.
This PR takes reverseproxy auth for API back but with default disabled.
To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.
For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
This PR rewrites the function `getStorage` and make it more clear.
Include tests from #26435, thanks @earl-warren
---------
Co-authored-by: Earl Warren <contact@earl-warren.org>
When users put the secrets into a file (GITEA__sec__KEY__FILE), the
newline sometimes is different to avoid (eg: echo/vim/...)
So the last newline could be removed when reading, it makes the users
easier to maintain the secret files.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.
Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.
The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.
Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---------
Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR will fix #26264, caused by #23911.
The package configuration derive is totally wrong when storage type is
local in that PR.
This PR fixed the inherit logic when storage type is local with some
unit tests.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config
Co-authored-by: Giteabot <teabot@gitea.io>
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.
<img width="1293" alt="图片"
src="https://github.com/go-gitea/gitea/assets/81045/c33355f0-1ea7-4fb3-ad43-cd23cd15391d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: Giteabot <teabot@gitea.io>
The "creating dir/file during load config" is a longstanding and complex
problem.
This PR only does a quick patch, it still needs more refactorings in the
future.
Fix #25938
Got the same problem as #25915 when updating an instance. The
`log.Fatal` should have been marked as breaking in #23911.
This PR adds a notice that the system is shutting down because of the
deprecated setting.
Replace #25580
Fix #19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
This prevents the disk from overflowing with auth keys file
Fixes #17117
## ⚠️ BREAKING
This changes the default option for creating a backup of the authorized
key file when an update is made to default to false.
Resolve #24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
More fix for #24981
* #24981
Close #22361
* #22361
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Co-authored-by: Giteabot <teabot@gitea.io>
Fix #25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
In modern days, there is no reason to make users set "charset" anymore.
Close #25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix #25377, the "install" page needs more fine tunes.
Follow up #22405
Fix #20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The INI package has many bugs and quirks, and in fact it is
unmaintained.
This PR is the first step for the INI package refactoring:
* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.
## ⚠️ BREAKING ⚠️
1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.
2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves #2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
