Backport #27446 by @sryze
storageHandler() is written as a middleware but is used as an endpoint
handler, and thus `next` is actually `nil`, which causes a null pointer
dereference when a request URL does not match the pattern (where it
calls `next.ServerHTTP()`).
Example CURL command to trigger the panic:
```
curl -I "http://yourhost/gitea//avatars/a"
```
Fixes #27409
---
Note: the diff looks big but it's actually a small change - all I did
was to remove the outer closure (and one level of indentation) ~and
removed the HTTP method and pattern checks as they seem redundant
because go-chi already does those checks~. You might want to check "Hide
whitespace" when reviewing it.
Alternative solution (a bit simpler): append `, misc.DummyOK` to the
route declarations that utilize `storageHandler()` - this makes it
return an empty response when the URL is invalid. I've tested this one
and it works too. Or maybe it would be better to return a 400 error in
that case (?)
Co-authored-by: Sergey Zolotarev <sryze@outlook.com>
Backport #27127 by @earl-warren
- Use the correct total amount for pagination. Thereby correctly show
the pagination bare when there's more than one page of
followers/followings.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1477
(cherry picked from commit c1a136318b)
Co-authored-by: Earl Warren <109468362+earl-warren@users.noreply.github.com>
Co-authored-by: Gusted <postmaster@gusted.xyz>
Backport #26813 by @JakobDev
You can currently visit `{repo}/issues/new` and create a blank issue,
even if it's disabled. This PR fixes this,
Fixes https://codeberg.org/forgejo/forgejo/issues/1356
Co-authored-by: JakobDev <jakobdev@gmx.de>
manual backport of #25988 to v1.20
- Tell the renderer to use the `document` mode, so it's consistent with
other renderers.
- Use the same padding as `.file-view.markup`, so it's consistent with
other containers that contain markup rendering.
- Resolves https://codeberg.org/forgejo/forgejo/issues/833
Co-authored-by: Earl Warren <109468362+earl-warren@users.noreply.github.com>
Backport #26259
This PR will introduce a transaction on creating pull request so that if
some step failed, it will rollback totally. And there will be no dirty
pull request exist.
Co-authored-by: Giteabot <teabot@gitea.io>
Backport #26392 by @wxiaoguang
Fix #26389
And complete an old TODO: `ctx.Params does un-escaping,..., which is
incorrect.`
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #26179 by @CaiCandong
In the original implementation, we can only get the first 30 records of
the commit status (the default paging size), if the commit status is
more than 30, it will lead to the bug #25990. I made the following two
changes.
- On the page, use the ` db.ListOptions{ListAll: true}` parameter
instead of `db.ListOptions{}`
- The `GetLatestCommitStatus` function makes a determination as to
whether or not a pager is being used.
fixed #25990
Co-authored-by: caicandong <50507092+CaiCandong@users.noreply.github.com>
Backport #26182 by @Zettat123
Fix #25934
Add `ignoreGlobal` parameter to `reqUnitAccess` and only check global
disabled units when `ignoreGlobal` is true. So the org-level projects
and user-level projects won't be affected by global disabled
`repo.projects` unit.
Co-authored-by: Zettat123 <zettat123@gmail.com>
Backport #26016 by @wxiaoguang
Close #25906
Succeeded logs:
```
[I] router: completed GET /root/test/issues/posters?&q=%20&_=1689853025011 for [::1]:59271, 200 OK in 127.7ms @ repo/issue.go:3505(repo.IssuePosters)
[I] router: completed GET /root/test/pulls/posters?&q=%20&_=1689853968204 for [::1]:59269, 200 OK in 94.3ms @ repo/issue.go:3509(repo.PullPosters)
```
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25417 by @wxiaoguang
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25806 by @yp05327
sort type `oldest` should be `Asc`.
Added a test for this.
I see we have `SearchOrderBy` in db model, but we are using many
different ways to define the sort type.
~Maybe we can improve this later.~
↑ Improved in this PR
Co-authored-by: yp05327 <576951401@qq.com>
Backport #25781 by @wxiaoguang
Fix #25627
1. `ctx.Data["Link"]` should use relative URL but not AppURL
2. The `data-params` is incorrect because it doesn't contain "page". JS
can simply use "window.location.search" to construct the AJAX URL
3. The `data-xxx` and `id` in notification_subscriptions.tmpl were
copied&pasted, they don't have affect.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Replace #25446, fix #25438
All "cancel" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
This is a complete fix for all modal dialogs.
The major change is "modules/aria/modal.js", "devtest" related code is
for demo/test purpose.
Related #25559
Current behaviour:
1. Deletion of a package version
2. Redirect to the owners package list
New behaviour:
1. Deletion of a package version
2.1. If there are more versions available, redirect to the package again
2.2. If there are no versions available, redirect to the owners package
list
Backport #25330
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
