- It's possible that the description of an `Regularlink` is `Text` and not
another `Regularlink`. Therefor if it's `Text`, convert it to an
`Regularlink` trough the 'old' behavior (pass it trough `org.String` and
trim `file:` prefix).
- Adds unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1430
(cherry picked from commit 385fc6ee6b)
Previously, the repo wiki was hardcoded to use `master` as its branch,
this change makes it possible to use `main` (or something else, governed
by `[repository].DEFAULT_BRANCH`, a setting that already exists and
defaults to `main`).
The way it is done is that a new column is added to the `repository`
table: `wiki_branch`. The migration will make existing repositories
default to `master`, for compatibility's sake, even if they don't have a
Wiki (because it's easier to do that). Newly created repositories will
default to `[repository].DEFAULT_BRANCH` instead.
The Wiki service was updated to use the branch name stored in the
database, and fall back to the default if it is empty.
Old repositories with Wikis using the older `master` branch will have
the option to do a one-time transition to `main`, available via the
repository settings in the "Danger Zone". This option will only be
available for repositories that have the internal wiki enabled, it is
not empty, and the wiki branch is not `[repository].DEFAULT_BRANCH`.
When migrating a repository with a Wiki, Forgejo will use the same
branch name for the wiki as the source repository did. If that's not the
same as the default, the option to normalize it will be available after
the migration's done.
Additionally, the `/api/v1/{owner}/{repo}` endpoint was updated: it will
now include the wiki branch name in `GET` requests, and allow changing
the wiki branch via `PATCH`.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit d87c526d2a)
So the caller can check log events at the desired level instead of
being limited to the default level log.INFO
(cherry picked from commit 2fbf5f9555)
(cherry picked from commit e2137a3147)
- Remove non base64-ed version of JWT secret generation. Because all
occurences need the Base64 version.
(cherry picked from commit 6a6b5a31a8)
(cherry picked from commit 066b8ca6b4)
handleSchedules() is called every time an event is received and will
check the content of the main branch to (re)create scheduled events.
There is no reason why intput.Event will be relevant when the schedule
workflow runs.
(cherry picked from commit 9a712bb276)
(cherry picked from commit 41af36da81)
(cherry picked from commit bb83604fa2)
(cherry picked from commit 65e4503a7a)
(cherry picked from commit e562b6f7a0)
(cherry picked from commit aca2ae2390)
(cherry picked from commit bf2b5ea507)
Recognise the `linguist-documentation` and `linguist-detectable`
attributes in `.gitattributes` files, and use them in
`GetLanguageStats()` to make a decision whether to include a particular
file in the stats or not.
This allows one more control over which files in their repositories
contribute toward the language statistics, so that for a project that is
mostly documentation, the language stats can reflect that.
Fixes #1672.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 6d4e02fe5f)
(cherry picked from commit ee1ead8189)
(cherry picked from commit 2dbec730e8)
Instead of repeating the tests that verify the ID of a comment
is related to the repository of the API endpoint, add the middleware
function commentAssignment() to assign ctx.Comment if the ID of the
comment is verified to be related to the repository.
There already are integration tests for cases of potential unrelated
comment IDs that cover some of the modified endpoints which covers the
commentAssignment() function logic.
* TestAPICommentReactions - GetIssueCommentReactions
* TestAPICommentReactions - PostIssueCommentReaction
* TestAPICommentReactions - DeleteIssueCommentReaction
* TestAPIEditComment - EditIssueComment
* TestAPIDeleteComment - DeleteIssueComment
* TestAPIGetCommentAttachment - GetIssueCommentAttachment
The other modified endpoints do not have tests to verify cases of
potential unrelated comment IDs. They no longer need to because they
no longer implement the logic to enforce this. They however all have
integration tests that verify the commentAssignment() they now rely on
does not introduce a regression.
* TestAPIGetComment - GetIssueComment
* TestAPIListCommentAttachments - ListIssueCommentAttachments
* TestAPICreateCommentAttachment - CreateIssueCommentAttachment
* TestAPIEditCommentAttachment - EditIssueCommentAttachment
* TestAPIDeleteCommentAttachment - DeleteIssueCommentAttachment
(cherry picked from commit d414376d74)
(cherry picked from commit 09db07aeae)
(cherry picked from commit f44830c3cb)
Conflicts:
modules/context/api.go
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 9d1bf7be15)
Refs: https://codeberg.org/forgejo/forgejo/issues/2109
(cherry picked from commit 8b4ba3dce7)
(cherry picked from commit 196edea0f9)
[GITEA] POST /repos/{owner}/{repo}/pulls/{index}/reviews/{id}/comments (squash) do not implicitly create a review
If a comment already exists in a review, the comment is added. If it
is the first comment added to a review, it will implicitly create a
new review instead of adding to the existing one.
The pull_service.CreateCodeComment function is responsibe for this
behavior and it will defer to createCodeComment once the review is
determined, either because it was found or because it was created.
Rename createCodeComment into CreateCodeCommentKnownReviewID to expose
it and change the API endpoint to use it instead. Since the review is
provided by the user and verified to exist already, there is no need
for the logic implemented by CreateCodeComment.
The tests are modified to remove the initial comment from the fixture
because it was creating the false positive. I was verified to fail
without this fix.
(cherry picked from commit 6a555996dc)
(cherry picked from commit b173a0ccee)
(cherry picked from commit 838ab9740a)
Expose the repository flags feature over the API, so the flags can be
managed by a site administrator without using the web API.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit bac9f0225d)
(cherry picked from commit e7f5c1ba14)
(cherry picked from commit 95d9fe19cf)
(cherry picked from commit 7fc51991e4)
This implements "repository flags", a way for instance administrators to
assign custom flags to repositories. The idea is that custom templates
can look at these flags, and display banners based on them, Forgejo does
not provide anything built on top of it, just the foundation. The
feature is optional, and disabled by default. To enable it, set
`[repository].ENABLE_FLAGS = true`.
On the UI side, instance administrators will see a new "Manage flags"
tab on repositories, and a list of enabled tags (if any) on the
repository home page. The "Manage flags" page allows them to remove
existing flags, or add any new ones that are listed in
`[repository].SETTABLE_FLAGS`.
The model does not enforce that only the `SETTABLE_FLAGS` are present.
If the setting is changed, old flags may remain present in the database,
and anything that uses them, will still work. The repository flag
management page will allow an instance administrator to remove them, but
not set them, once removed.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit ba735ce222)
(cherry picked from commit f09f6e029b)
(cherry picked from commit 2f8b041489)
(cherry picked from commit d3186ee5f4)
When trying to find a `README.md` in a `.profile` repo, do so case
insensitively. This change does not make it possible to render readmes
in formats other than Markdown, it just removes the hard-coded
"README.md".
Also adds a few tests to make sure the change works.
Fixes #1494.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit edd219d8e9)
(cherry picked from commit 2c0105ef17)
(cherry picked from commit 3975a9f3aa)
(cherry picked from commit dee4a18423)
(cherry picked from commit 60aee6370f)
Adds a new `/{username}/{repo}/badges` family of routes, which redirect
to various shields.io badges. The goal is to not reimplement badge
generation, and delegate it to shields.io (or a similar service), which
are already used by many. This way, we get all the goodies that come
with it: different styles, colors, logos, you name it.
So these routes are just thin wrappers around shields.io that make it
easier to display the information we want. The URL is configurable via
`app.ini`, and is templatable, allowing to use alternative badge
generator services with slightly different URL patterns.
Additionally, for compatibility with GitHub, there's an
`/{username}/{repo}/actions/workflows/{workflow_file}/badge.svg` route
that works much the same way as on GitHub. Change the hostname in the
URL, and done.
Fixes gitea#5633, gitea#23688, and also fixes #126.
Work sponsored by Codeberg e.V.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit fcd0f61212)
(cherry picked from commit 20d14f7844)
(cherry picked from commit 4359741431)
(cherry picked from commit 35cff45eb8)
(cherry picked from commit 2fc0d0b8a3)
Adds `[repository].DOWNLOAD_OR_CLONE_METHODS` (defaulting to
"download-zip,download-targz,download-bundle,vscode-clone"), which lets
an instance administrator override the additional clone methods
displayed on the repository home view.
This is purely display-only, the clone methods not listed here are still
available, unless disabled elsewhere. They're just not displayed.
Fixes #710.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit 2aadcf4946)
(cherry picked from commit 42ac34fbf9)
(cherry picked from commit bd231b0245)
(cherry picked from commit 3d3366dbbe)
(cherry picked from commit 0157fb9b88)
(cherry picked from commit bee88f6a83)
do not reuse the payload of the event that triggered the creation of
the scheduled event. Create a new one instead that contains no other
information than the event name in the action field ("schedule").
(cherry picked from commit 0b40ca1ea5)
(cherry picked from commit f86487432b)
(cherry picked from commit 4bd5d2e9d0)
(cherry picked from commit d10830e238)
(cherry picked from commit 53f5a3aa91)
(cherry picked from commit 9ed1487b73)
(cherry picked from commit 6a39978851)
- This adds coverage to the most common and the edge cases of what the
footnote implementation should be capable of. This was partly done to
ensure no hidden surprises when changing the implementation, as markdown
rendering is one of the more important features of Forgejo.
(cherry picked from commit 16ecdb4170)
(cherry picked from commit 19dc5ef5e5)
(cherry picked from commit d5955efc0a)
(cherry picked from commit 2cdaf10836)
(cherry picked from commit 251b567794)
Conflicts:
modules/markup/markdown/markdown_test.go
https://codeberg.org/forgejo/forgejo/pulls/2153
(cherry picked from commit f863f4b005)
(cherry picked from commit f39f108934)
(cherry picked from commit 6d46f9ee40)
It will determine how anchors are created and will break existing
links otherwise.
Adapted from Revert "Make `user-content-* ` consistent with github (#26388)
(cherry picked from commit 1666fba8f5)
(cherry picked from commit 48f38280e8)
(cherry picked from commit 03adb3a2b4)
(cherry picked from commit a0ad36f0ad)
(cherry picked from commit 3aac990064)
(cherry picked from commit 137daabc9b)
(cherry picked from commit b438aed4c1)
(cherry picked from commit 90b36f2e67)
- Currently the parser will look for `\[` and `$$` to detect when Latex
code starts, it will look for `\]` and `$$` respectively in order to
determine the end of the code. However if no end is found the parser
assumes the rest of the input is part of the Latex code.
- Adjust the parser's behavior to not allow the case to assume the rest
of the input is part of the Latex code and requires in order to
determine if some input is Latex code that the end sequence is also
specified.
- Example: `\[hello]` would no longer be detected as Latex code with
this patch.
- Added unit tests.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1817
(cherry picked from commit 452aef1bb1)
(cherry picked from commit 8a857c24b0)
(cherry picked from commit acd1456db9)
(cherry picked from commit 6523b45073)
(cherry picked from commit e2e1a8afe7)
(cherry picked from commit a46ef652eb)
(cherry picked from commit 54d5a8c073)
(cherry picked from commit 4a88dc6416)
(cherry picked from commit f88b58be3f)
(cherry picked from commit 316ff9767f)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
(cherry picked from commit 7f12610ff6)
[GITEA] notifies admins on new user registration (squash) DeleteByID
trivial conflict because of
778ad795fd Refactor deletion (#28610)
(cherry picked from commit 05682614e5)
(cherry picked from commit 64bd374803)
(cherry picked from commit 63d086f666)
(cherry picked from commit 3cd48ef4d5)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/2249
(cherry picked from commit 6578ec4ed6)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2300
- Databases are one of the most important parts of Forgejo, every
interaction with Forgejo uses the database in one way or another.
Therefore, it is important to maintain the database and recognize when
Forgejo is not doing well with the database. Forgejo already has the
option to log *every* SQL query along with its execution time, but
monitoring becomes impractical for larger instances and takes up
unnecessary storage in the logs.
- Add a QoL enhancement that allows instance administrators to specify a
threshold value beyond which query execution time is logged as a warning
in the xorm logger. The default value is a conservative five seconds to
avoid this becoming a source of spam in the logs.
- The use case for this patch is that with an instance the size of Codeberg, monitoring SQL logs is not very fruitful and most of them are uninteresting. Recently, in the context of persistent deadlock issues (https://codeberg.org/forgejo/forgejo/issues/220), I have noticed that certain queries hold locks on tables like comment and issue for several seconds. This patch helps to identify which queries these are and when they happen.
- Added unit test.
(cherry picked from commit 24bbe7886f)
(cherry picked from commit 6e29145b3c)
(cherry picked from commit 63731e3071)
(cherry picked from commit 3ce1a09736)
(cherry picked from commit a64426907d)
(cherry picked from commit 4b19215691)
(cherry picked from commit e635674435)
(cherry picked from commit 9cf501f1af)
(cherry picked from commit 0d6b934eba)
(cherry picked from commit 4b6c273879)
(cherry picked from commit 89b1315338)
(cherry picked from commit edd8e66ce9)
[GITEA] Add slow SQL query warning (squash) document the setting
(cherry picked from commit ce38599c51)
(cherry picked from commit 794aa67c68)
(cherry picked from commit a4c2c6b004)
(cherry picked from commit 97912752bc)
(cherry picked from commit 00b5327c97)
(cherry picked from commit 1069c860e7)
(cherry picked from commit 84241f42c8)
(cherry picked from commit e4bda0e845)
(cherry picked from commit 7357fb91bf)
(cherry picked from commit a8dd7f6da2)
(cherry picked from commit e636e9f4be)
(cherry picked from commit bf04ae8603)
(cherry picked from commit 93b19e3568)
(cherry picked from commit 83f91363ad)
(cherry picked from commit e34a05bc73)
(cherry picked from commit 68569aeee9)
This PR adds colorblind theme variants of the forgejo themes. I duplicated the forjego light and dark themes and only changed the lines related to diff colors for added and removed rows/words.
I am not a designer, and I am also colorblind, so better suggestions of colors are most welcome. However, this is a good start as I can at least personally see the colors now. I got the colors for the dark theme from the GitHub diff colors, the light ones I couldn't get from GitHub as they use white as a plain background, which Forgejo's theme doesn't, so they were decided on after a bit of random testing.
Resolves #986
(cherry picked from commit dcdb4a372d)
[FEAT] add Forgejo Git Service (squash) register a Forgejo factory
If the Forgejo factory for the Forgejo service is not registered,
newDownloader will fallback to a git service and not migrate issues
etc.
Refs: https://codeberg.org/forgejo/forgejo/issues/1678
(cherry picked from commit 51938cd161)
[FEAT] add Forgero Git Service
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
(cherry picked from commit a878adfe62)
Adding description and Forgejo SVG
(cherry picked from commit 13738c0380)
Undo reordering and tmpl redirection
(cherry picked from commit 9ae51c46f4)
(cherry picked from commit 70fffdc61d)
(cherry picked from commit c0ebfa9da3)
(cherry picked from commit 9922c92787)
(cherry picked from commit 00c0effbc7)
(cherry picked from commit e4c9525b13)
(cherry picked from commit 09d7b83211)
(cherry picked from commit bbcd5975c9)
(cherry picked from commit 55c70a0e18)
(cherry picked from commit 76596410c0)
(cherry picked from commit 1308043931)
(cherry picked from commit 919d6aedfe)
[FEAT] add Forgero Git Service (squash) more tests
Previously only Gitea service was being tested under self-hosted migrations. Since Forgejo is also self-hosted and in fact use the same downloader/migrator we can add to this suite another test that will do the same, migrating the same repository under the same local instance but for the Forgejo service (represented by 9)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1709
Co-authored-by: zareck <cassiomilczareck@gmail.com>
Co-committed-by: zareck <cassiomilczareck@gmail.com>
(cherry picked from commit 40a4b8f1a8)
(cherry picked from commit 3198b4a642)
(cherry picked from commit 4edda1f389)
(cherry picked from commit 4d91b77d29)
(cherry picked from commit afe85c52e3)
(cherry picked from commit 5ea7df79ad)
(cherry picked from commit a667182542)
(cherry picked from commit a9bebb1e71)
(cherry picked from commit 4831a89e46)
(cherry picked from commit e02a74651f)
(cherry picked from commit 05dcef59aa)
(cherry picked from commit c8bac187f9)
(cherry picked from commit c87903a0cc)
FORGEJO_* environment variables are set to the corresponding GITEA_*
variable when the cli starts. This approach is intended to minimize
the conflicts on rebase. All occurences of GITEA_* are left untouched
in the codebase and they are only changed to FORGEJO_* if exposed to
the user.
(cherry picked from commit e466f9d10e)
(cherry picked from commit e33e95931b)
(cherry picked from commit 2cfc6519b7)
(cherry picked from commit af8864373a)
(cherry picked from commit a0550ff339)
(cherry picked from commit 24dc0a5191)
(cherry picked from commit e255eea2b4)
(cherry picked from commit 0c4f5afa7a)
(cherry picked from commit 42fce708d0)
(cherry picked from commit e7278c3c22)
(cherry picked from commit 0fb9ed7e0e)
(cherry picked from commit a98308aa4d)
(cherry picked from commit b8695fcbe0)
(cherry picked from commit 4aee8719f5)
(cherry picked from commit 1c503c1ba7)
(cherry picked from commit cf1ed8551e)
(cherry picked from commit c52459b088)
(cherry picked from commit 92cac277b2)
(cherry picked from commit 2c744f1118)
(cherry picked from commit 989a98a8c5)
(cherry picked from commit 9cf7052bd4)
(cherry picked from commit a13c9667e0)
Conflicts:
main.go
https://codeberg.org/forgejo/forgejo/pulls/1216
(cherry picked from commit a9c3cf060d)
(cherry picked from commit eb6d904b23)
(cherry picked from commit fd4878e487)
(cherry picked from commit cc2cab9241)
(cherry picked from commit be523c63db)
(cherry picked from commit 254d1a2f9a)
(cherry picked from commit 1eecf4200e)
(cherry picked from commit a01f5c3475)
(cherry picked from commit b1ba7ce321)
(cherry picked from commit eddfd96beb)
(cherry picked from commit c9c9b7e49b)
(cherry picked from commit ad7e871779)
(cherry picked from commit 9073ed215b)
(cherry picked from commit a827fdadd3)
(cherry picked from commit 39e66246cd)
(cherry picked from commit 46d1c778a2)
(cherry picked from commit a65bc0b75d)
(cherry picked from commit 5f901e9671)
Conflicts:
cmd/main.go
https://codeberg.org/forgejo/forgejo/pulls/1976
(cherry picked from commit a0e017d206)
(cherry picked from commit e6e24b9631)
(cherry picked from commit 00667d869b)
(cherry picked from commit a9c5bc38e9)
(cherry picked from commit 671ef86e6d)
(cherry picked from commit 5063fd6b84)
(cherry picked from commit 5c043c2aef)
(cherry picked from commit faab0c670e)
(cherry picked from commit b6d59493c7)
(cherry picked from commit 837da0c1f4)
(cherry picked from commit 71ad245e1d)
(cherry picked from commit 85a7032f1b)
Conflicts:
web_src/css/themes/theme-forgejo-auto.less
web_src/css/themes/theme-forgejo-dark.less
web_src/css/themes/theme-forgejo-light.less
web_src/less/_home.less
see https://codeberg.org/forgejo/forgejo/pulls/552
(cherry picked from commit 0c2c131bb0)
[BRANDING] Add Forgejo light, dark, and auto themes: fix import
Closes: https://codeberg.org/forgejo/forgejo/issues/562
(cherry picked from commit 2b0dc1f80f)
(cherry picked from commit 494ad6a3b7)
(cherry picked from commit 6940fc22c4)
(cherry picked from commit bd6f00656c)
(cherry picked from commit ebb506a124)
(cherry picked from commit 43d72d3781)
(cherry picked from commit 1a87adca01)
(cherry picked from commit 0704c410b4)
(cherry picked from commit 9039b47c16)
(cherry picked from commit e32bb78924)
(cherry picked from commit 053ad84f91)
(cherry picked from commit a35f1b6da7)
(cherry picked from commit 8cb94c01d5)
[BRANDING] fix invisible label in branch protection settings
(cherry picked from commit 23e5d45721)
(cherry picked from commit f02e4582e5)
[BRANDING] Fix commit label for Forgejo Dark theme (#843)
- Define the `--color-label-text` variable with a light color, which is currently used for commit's SHA
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/843
(cherry picked from commit 74c186a380)
(cherry picked from commit 7e185c5ca5)
[BRANDING] Add Forgejo light, dark, and auto themes (squash) variables
Adapt to b6bcb79987 Improve notification
icon and navbar
Refs: https://codeberg.org/forgejo/forgejo/issues/893
[BRANDING] Add Forgejo light variables
Updates the Forgejo light theme with the changes in b6bcb7998
These are the same changes as made in 2574dbcff to the dark theme
Refs: forgejo/forgejo#893
(cherry picked from commit 9e99fe4f9e)
(cherry picked from commit acbb98bd91)
(cherry picked from commit c80245ed87)
[BRANDING] fix code highlight color in Forgejo themes
(cherry picked from commit ffc49a4e99)
(cherry picked from commit c5f45a941e)
(cherry picked from commit eee5427c9d)
(cherry picked from commit 89be50ca27)
(cherry picked from commit 74e4776ef5)
(cherry picked from commit 6c4e07a6a7)
[BRANDING] more accessible text selection color in Forgejo themes
(cherry picked from commit 7407605ffdedef8fa320477a3bd7efa06df263e2)
(cherry picked from commit 5aab3872cc)
(cherry picked from commit 1ec77d8bd0)
(cherry picked from commit 964c89fce7)
(cherry picked from commit 8a8023a441)
(cherry picked from commit 1c9ffeadf5)
[BRANDING] Fix navigation hover color (squash)
- For items in the navigation bar, use different background colours for hover.
- Regression since https://github.com/go-gitea/gitea/pull/25343
(cherry picked from commit 8f3f4b219c)
(cherry picked from commit edfb0eef06)
(cherry picked from commit a6367fa48a)
(cherry picked from commit d5697abe42)
(cherry picked from commit eaf5370919)
(cherry picked from commit 58f11e7310)
(cherry picked from commit 732e1b35d5)
(cherry picked from commit 0d794ae1c9)
(cherry picked from commit ccc8aed308)
Conflicts:
modules/setting/ui.go
https://codeberg.org/forgejo/forgejo/pulls/1582
(cherry picked from commit 209059fbaf)
(cherry picked from commit 80ba2df4a7)
(cherry picked from commit 17b325da23)
(cherry picked from commit 3518b87c8d)
(cherry picked from commit 4042143f96)
(cherry picked from commit 07f976f9d7)
(cherry picked from commit 1bbc6b93e9)
(cherry picked from commit 8aa0bba307)
(cherry picked from commit 94c4a14ac3)
Update Forgejo theme (squash)
- Incorporate changes from 79a4c80f8d into the Forgejo themes.
- Fix that there's no focus or active coloring on primary and secondary
buttons for Forgejo themes caused by
023e937141 that moved variablse from
base.css (shared) to the themes.
- Extend hack to make red buttons darker on dark Forgejo theme to
include active styling and remove the unnecessary `!important`.
(cherry picked from commit 2e32da4419)
(cherry picked from commit a4eca09543)
(cherry picked from commit e6e452811d)
(cherry picked from commit e9a5addf3d)
(cherry picked from commit a1b8b5fa0d)
[BRANDING] Update forgejo theme
- Inlcude a103b79f60 and
1b2cd4c4e1 and
376c0e25f7 and 023e937141
into the Forgejo theme.
- Fix tooltips not being visual, due to missing background color.
- Fix labels not having a background color.
- Fix modals not having a dimmed background.
- Fix no syntax highlighting on Forgejo light due to missing imports.
- Incorporate feedback from
https://codeberg.org/forgejo/forgejo/issues/1117 to make the labels
stand out less.
(cherry picked from commit bc21dc21e1)
(cherry picked from commit 82323c09cc)
(cherry picked from commit 2da09af28d)
(cherry picked from commit 978aeb7cde)
(cherry picked from commit 984c264e19)
(cherry picked from commit 6aa7c8db38)
(cherry picked from commit 4379269a46)
Conflicts:
modules/setting/ui.go
https://codeberg.org/forgejo/forgejo/pulls/2116
(cherry picked from commit 9414391ec1)
(cherry picked from commit 02c9b776e8)
(cherry picked from commit 7324b417ce)
(cherry picked from commit b20aa3ed17)
Replaces `Gitea` with `Forgejo` in the default config settings for new installs.
This will not affect existing installs.
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/140
Co-authored-by: Caesar Schinas <caesar@noreply.codeberg.org>
Co-committed-by: Caesar Schinas <caesar@noreply.codeberg.org>
(cherry picked from commit ca1319aa16)
(cherry picked from commit 52a4d238a0)
(cherry picked from commit f63536538c)
Conflicts:
web_src/js/features/install.js
(cherry picked from commit 861cc434e1)
(cherry picked from commit 0e6ea60c80)
(cherry picked from commit 0cbc0ec15d)
(cherry picked from commit 3cc19b0ae2)
(cherry picked from commit 50fcb885fe)
(cherry picked from commit f6039d4df4)
(cherry picked from commit 5ae5c6ba2d)
(cherry picked from commit f0b565e0ed)
(cherry picked from commit adbd4d2015)
(cherry picked from commit d26c540ffd)
(cherry picked from commit 6df6781b42)
(cherry picked from commit b6fb56e1c4)
(cherry picked from commit bb4f98a0ca)
(cherry picked from commit 6779229f27)
(cherry picked from commit c216c85aee)
(cherry picked from commit dff780bced)
(cherry picked from commit 4e036aa3b6)
(cherry picked from commit 8b3bc3e8a6)
(cherry picked from commit 1e4d852332)
(cherry picked from commit 07a15d1844)
(cherry picked from commit fb44b3e10d)
(cherry picked from commit b212d83319)
(cherry picked from commit 5754971be5)
(cherry picked from commit 0c43b4e82c)
Conflicts:
routers/install/install.go
https://codeberg.org/forgejo/forgejo/pulls/1351
(cherry picked from commit 2e22a7208a)
(cherry picked from commit 676b0a8a48)
(cherry picked from commit bc4a8bf9bc)
(cherry picked from commit 5e09a4e174)
(cherry picked from commit 712c52a32a)
(cherry picked from commit ba3d93cc4a)
(cherry picked from commit a5a0396abc)
(cherry picked from commit 09b205f30b)
(cherry picked from commit 52b7729e86)
(cherry picked from commit bfe78735e8)
(cherry picked from commit 915c4f7a7b)
(cherry picked from commit 3b1af856bb)
(cherry picked from commit ffe2c0a353)
(cherry picked from commit fd5cc72128)
(cherry picked from commit 95d3555e47)
(cherry picked from commit b9b853f4b0)
(cherry picked from commit 967453eb6f)
(cherry picked from commit 3298f502dd)
(cherry picked from commit 3481d1f816)
(cherry picked from commit 7508c24a0c)
(cherry picked from commit 54e97f7c35)
(cherry picked from commit 492876992f)
- Add the ability to block a user via their profile page.
- This will unstar their repositories and visa versa.
- Blocked users cannot create issues or pull requests on your the doer's repositories (mind that this is not the case for organizations).
- Blocked users cannot comment on the doer's opened issues or pull requests.
- Blocked users cannot add reactions to doer's comments.
- Blocked users cannot cause a notification trough mentioning the doer.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/540
(cherry picked from commit 687d852480)
(cherry picked from commit 0c32a4fde5)
(cherry picked from commit 1791130e3c)
(cherry picked from commit 37858b7e8f)
(cherry picked from commit a3e2bfd7e9)
(cherry picked from commit 7009b9fe87)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
templates/user/profile.tmpl
(cherry picked from commit b2aec34791)
(cherry picked from commit e2f1b73752)
[MODERATION] organization blocking a user (#802)
- Resolves #476
- Follow up for: #540
- Ensure that the doer and blocked person cannot follow each other.
- Ensure that the block person cannot watch doer's repositories.
- Add unblock button to the blocked user list.
- Add blocked since information to the blocked user list.
- Add extra testing to moderation code.
- Blocked user will unwatch doer's owned repository upon blocking.
- Add flash messages to let the user know the block/unblock action was successful.
- Add "You haven't blocked any users" message.
- Add organization blocking a user.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/802
(cherry picked from commit 0505a10421)
(cherry picked from commit 37b4e6ef9b)
(cherry picked from commit c17c121f2c)
[MODERATION] organization blocking a user (#802) (squash)
Changes to adapt to:
6bbccdd177 Improve AJAX link and modal confirm dialog (#25210)
Refs: https://codeberg.org/forgejo/forgejo/pulls/882/files#issuecomment-945962
Refs: https://codeberg.org/forgejo/forgejo/pulls/882#issue-330561
(cherry picked from commit 523635f83c)
(cherry picked from commit 4743eaa6a0)
(cherry picked from commit eff5b43d2e)
Conflicts: https://codeberg.org/forgejo/forgejo/pulls/1014
routers/web/user/profile.go
(cherry picked from commit 9d359be5ed)
(cherry picked from commit b1f3069a22)
[MODERATION] add user blocking API
- Follow up for: #540, #802
- Add API routes for user blocking from user and organization
perspective.
- The new routes have integration testing.
- The new model functions have unit tests.
- Actually quite boring to write and to read this pull request.
(cherry picked from commit f3afaf15c7)
(cherry picked from commit 6d754db3e5)
(cherry picked from commit 2a89ddc0ac)
(cherry picked from commit 4a147bff7e)
Conflicts:
routers/api/v1/api.go
templates/swagger/v1_json.tmpl
(cherry picked from commit bb8c339185)
(cherry picked from commit 5a11569a01)
(cherry picked from commit 2373c801ee)
[MODERATION] restore redirect on unblock
ctx.RedirectToFirst(ctx.FormString("redirect_to"), ctx.ContextUser.HomeLink())
was replaced by
ctx.JSONOK()
in 128d77a3a Following up fixes for "Fix inconsistent user profile layout across tabs" (#25739)
thus changing the behavior (nicely spotted by the tests). This
restores it.
(cherry picked from commit 597c243707)
(cherry picked from commit cfa539e590)
[MODERATION] Add test case (squash)
- Add an test case, to test an property of the function.
(cherry picked from commit 70dadb1916)
[MODERATION] Block adding collaborators
- Ensure that the doer and blocked user cannot add each other as
collaborators to repositories.
- The Web UI gets an detailed message of the specific situation, the API
gets an generic Forbidden code.
- Unit tests has been added.
- Integration testing for Web and API has been added.
- This commit doesn't introduce removing each other as collaborators on
the block action, due to the complexity of database calls that needs to
be figured out. That deserves its own commit and test code.
(cherry picked from commit 747be949a1)
[MODERATION] move locale_en-US.ini strings to avoid conflicts
Conflicts:
web_src/css/org.css
web_src/css/user.css
https://codeberg.org/forgejo/forgejo/pulls/1180
(cherry picked from commit e53f955c88)
Conflicts:
services/issue/comments.go
https://codeberg.org/forgejo/forgejo/pulls/1212
(cherry picked from commit b4a454b576)
Conflicts:
models/forgejo_migrations/migrate.go
options/locale/locale_en-US.ini
services/pull/pull.go
https://codeberg.org/forgejo/forgejo/pulls/1264
[MODERATION] Remove blocked user collaborations with doer
- When the doer blocks an user, who is also an collaborator on an
repository that the doer owns, remove that collaboration.
- Added unit tests.
- Refactor the unit test to be more organized.
(cherry picked from commit ec87016178)
(cherry picked from commit 313e6174d8)
[MODERATION] QoL improvements (squash)
- Ensure that organisations cannot be blocked. It currently has no
effect, as all blocked operations cannot be executed from an
organisation standpoint.
- Refactored the API route to make use of the `UserAssignmentAPI`
middleware.
- Make more use of `t.Run` so that the test code is more clear about
which block of code belongs to which test case.
- Added more integration testing (to ensure the organisations cannot be
blocked and some authorization/permission checks).
(cherry picked from commit e9d638d075)
[MODERATION] s/{{avatar/{{ctx.AvatarUtils.Avatar/
(cherry picked from commit ce8b30be13)
(cherry picked from commit f911dc4025)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1354
(cherry picked from commit c1b37b7fda)
(cherry picked from commit 856a2e0903)
[MODERATION] Show graceful error on comment creation
- When someone is blocked by the repository owner or issue poster and
try to comment on that issue, they get shown a graceful error.
- Adds integration test.
(cherry picked from commit 490646302e)
(cherry picked from commit d3d88667cb)
(cherry picked from commit 6818de13a9)
[MODERATION] Show graceful error on comment creation (squash) typo
(cherry picked from commit 1588d4834a)
(cherry picked from commit d510ea52d0)
(cherry picked from commit 8249e93a14)
[MODERATION] Refactor integration testing (squash)
- Motivation for this PR is that I'd noticed that a lot of repeated
calls are happening between the test functions and that certain tests
weren't using helper functions like `GetCSRF`, therefor this refactor of
the integration tests to keep it: clean, small and hopefully more
maintainable and understandable.
- There are now three integration tests: `TestBlockUser`,
`TestBlockUserFromOrganization` and `TestBlockActions` (and has been
moved in that order in the source code).
- `TestBlockUser` is for doing blocking related actions as an user and
`TestBlockUserFromOrganization` as an organisation, even though they
execute the same kind of tests they do not share any database calls or
logic and therefor it currently doesn't make sense to merge them
together (hopefully such oppurtinutiy might be presented in the future).
- `TestBlockActions` now contain all tests for actions that should be
blocked after blocking has happened, most tests now share the same doer
and blocked users and a extra fixture has been added to make this
possible for the comment test.
- Less code, more comments and more re-use between tests.
(cherry picked from commit ffb393213d)
(cherry picked from commit 85505e0f81)
(cherry picked from commit 0f3cf17761)
[MODERATION] Fix network error (squash)
- Fix network error toast messages on user actions such as follow and
unfollow. This happened because the javascript code now expects an JSON
to be returned, but this wasn't the case due to
cfa539e590127b4953b010fba3dea21c82a1714.
- The integration testing has been adjusted to instead test for the
returned flash cookie.
(cherry picked from commit 112bc25e54)
(cherry picked from commit 1194fe4899)
(cherry picked from commit 9abb95a844)
[MODERATION] Modernize frontend (squash)
- Unify blocked users list.
- Use the new flex list classes for blocked users list to avoid using
the CSS helper classes and thereby be consistent in the design.
- Fix the modal by using the new modal class.
- Remove the icon in the modal as looks too big in the new design.
- Fix avatar not displaying as it was passing the context where the user
should've been passed.
- Don't use italics for 'Blocked since' text.
- Use namelink template to display the user's name and homelink.
(cherry picked from commit ec935a16a3)
(cherry picked from commit 67f37c8346)
Conflicts:
models/user/follow.go
models/user/user_test.go
routers/api/v1/user/follower.go
routers/web/shared/user/header.go
routers/web/user/profile.go
templates/swagger/v1_json.tmpl
https://codeberg.org/forgejo/forgejo/pulls/1468
(cherry picked from commit 6a9626839c)
Conflicts:
tests/integration/api_nodeinfo_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508#issuecomment-1242385
(cherry picked from commit 7378b251b4)
Conflicts:
models/fixtures/watch.yml
models/issues/reaction.go
models/issues/reaction_test.go
routers/api/v1/repo/issue_reaction.go
routers/web/repo/issue.go
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1547
(cherry picked from commit c2028930c1)
(cherry picked from commit d3f9134aee)
(cherry picked from commit 7afe154c5c)
(cherry picked from commit 99ac7353eb)
(cherry picked from commit a9cde00c5c)
Conflicts:
services/user/delete.go
https://codeberg.org/forgejo/forgejo/pulls/1736
(cherry picked from commit 008c0cc63d)
[DEADCODE] add exceptions
(cherry picked from commit 12ddd2b10e)
[MODERATION] Remove deadcode (squash)
- Remove deadcode that's no longer used by Forgejo.
(cherry picked from commit 0faeab4fa9)
[MODERATION] Add repo transfers to blocked functionality (squash)
- When someone gets blocked, remove all pending repository transfers
from the blocked user to the doer.
- Do not allow to start transferring repositories to the doer as blocked user.
- Added unit testing.
- Added integration testing.
(cherry picked from commit 8a3caac330)
(cherry picked from commit a92b4cfeb6)
(cherry picked from commit acaaaf07d9)
(cherry picked from commit 735818863c)
(cherry picked from commit f50fa43b32)
(cherry picked from commit e166836433)
(cherry picked from commit 82a0e4a381)
(cherry picked from commit ff233c19c4)
(cherry picked from commit 8ad87d215f)
[MODERATION] Fix unblock action (squash)
- Pass the whole context instead of only giving pieces.
- This fixes CSRF not correctly being inserted into the unblock buttons.
(cherry picked from commit 2aa51922ba)
(cherry picked from commit 7ee8db0f01)
(cherry picked from commit e4f8b999bc)
(cherry picked from commit 05aea60b13)
(cherry picked from commit dc0d61b012)
(cherry picked from commit f53fa583de)
(cherry picked from commit c65b89a58d)
(cherry picked from commit 69e50b9969)
(cherry picked from commit ec127440b8)
[MODERATION] cope with shared fixtures
* There is one more issue in the fixtures and this breaks some tests
* The users in the shared fixtures were renamed for clarity and that
breaks some tests
(cherry picked from commit 707a4edbdf)
Conflicts:
modules/indexer/issues/indexer_test.go
https://codeberg.org/forgejo/forgejo/pulls/1508
(cherry picked from commit 82cc044366)
(cherry picked from commit 2776aec7e8)
(cherry picked from commit 1fbde36dc7)
(cherry picked from commit 1293db3c4e)
(cherry picked from commit 6476802175)
(cherry picked from commit 5740f2fc83)
(cherry picked from commit afc12d7b6e)
[MODERATION] Fix transfer confirmation (squash)
- Fix problem caused by the clearer confirmation for dangerous actions commit.
(cherry picked from commit 3488f4a9cb)
(cherry picked from commit ed7de91f6a)
(cherry picked from commit 2d97929b9b)
(cherry picked from commit 50d035a7b0)
(cherry picked from commit 0a0c07d78a)
(cherry picked from commit 85e55c4dbc)
(cherry picked from commit d8282122ad)
(cherry picked from commit 3f0b3b6cc5)
[MODERATION] Purge issues on user deletion (squash)
(cherry picked from commit 4f529d9596)
(cherry picked from commit f0e3acadd3)
(cherry picked from commit 682c4effe6)
(cherry picked from commit e43c2d84fd)
(cherry picked from commit 9c8e53ccc7)
(cherry picked from commit a9eb7ac783)
[MODERATION] Purge issues on user deletion (squash) revert shared fixtures workarounds
(cherry picked from commit 7224653a40)
(cherry picked from commit aa6e8672f9)
(cherry picked from commit 58c7947e95)
(cherry picked from commit f1aacb1851)
(cherry picked from commit 0bf174af87)
(cherry picked from commit f9706f4335)
[MODERATION] Prepare moderation for context locale changes (squash)
- Resolves https://codeberg.org/forgejo/forgejo/issues/1711
(cherry picked from commit 2e289baea9)
(cherry picked from commit 97b16bc19a)
[MODERATION] User blocking (squash) do not use shared fixture
It conflicts with a fixtured added in the commit
Fix comment permissions (#28213) (#28216)
(cherry picked from commit ab40799dcab24e9f495d765268b791931da81684)
(cherry picked from commit 996c92cafd)
(cherry picked from commit 259912e3a6)
Conflicts:
options/locale/locale_en-US.ini
https://codeberg.org/forgejo/forgejo/pulls/1921
(cherry picked from commit 1e82abc032)
(cherry picked from commit a176fee160)
(cherry picked from commit 0480b76dfe)
(cherry picked from commit 4bc06b7b38)
(cherry picked from commit 073094cf72)
(cherry picked from commit ac6201c647)
(cherry picked from commit 7e0812674d)
(cherry picked from commit 068c741e56)
Conflicts:
models/repo_transfer.go
models/repo_transfer_test.go
routers/web/user/profile.go
https://codeberg.org/forgejo/forgejo/pulls/2298
- Use TXT records in order to determine the latest available version.
- This addresses a valid privacy issue, as with HTTP requests the server
can keep track(estimated) of how many instances are using Forgejo, with
DNS that's basically not possible as the server will never receive any
data, as the only ones receiving data are DNS resolvers.
(cherry picked from commit 0baefb546a)
(cherry picked from commit e8ee41880b)
(cherry picked from commit 7eca4f3bf1)
(cherry picked from commit 6dde3992dc)
(cherry picked from commit fb3a37fbfc)
(cherry picked from commit 8304af1e9d)
(cherry picked from commit 0543a7d12a)
(cherry picked from commit c3a22933b7)
(cherry picked from commit e243707694)
(cherry picked from commit 7eb6d1bcf7)
(cherry picked from commit 1d7b9535cd)
(cherry picked from commit 05920dce67)
(cherry picked from commit f173f27d7c)
(cherry picked from commit 90e1c9340e)
(cherry picked from commit de68610ea7)
(cherry picked from commit 8d5757ea04)
(cherry picked from commit c7a7fff316)
(cherry picked from commit 39ac8b8fc1)
(cherry picked from commit 9889203301)
[PRIVACY]: Adjust update checker description
- Resolves #323
- Adjust the description of the update check function on the
installation page to describe the privacy method instead of the HTTP
method by checking gitea.io
(cherry picked from commit 61eae5b105)
(cherry picked from commit 091def20a1)
(cherry picked from commit d5d11bf45a)
(cherry picked from commit 71863d4707)
(cherry picked from commit 11ece4aab1)
(cherry picked from commit afdd7e714f)
(cherry picked from commit 39170e2f1d)
(cherry picked from commit 4b3a52aab8)
(cherry picked from commit 9d763c5fc8)
(cherry picked from commit 638db15482)
(cherry picked from commit a52bfdd8e7)
(cherry picked from commit dc93d00e85)
(cherry picked from commit 0bc4b3508c)
(cherry picked from commit 3f760d85a4)
(cherry picked from commit ecc2716785)
(cherry picked from commit 6334d5677e)
Conflicts:
modules/updatechecker/update_checker.go
UpdateRemoteVersion now has a context argument. However, in
the updated code from Gitea the context comes from the HTTP
request and does not actually provide any useful context.
Replace that with context.Background()
(cherry picked from commit ca2200767e)
(cherry picked from commit f46feca224)
(cherry picked from commit a800a66ca8)
(cherry picked from commit 21f017454e)
(cherry picked from commit 762d18e09a)
(cherry picked from commit 6d28e120c1)
(cherry picked from commit 4fcd7e7cbf)
(cherry picked from commit 9516285112)
(cherry picked from commit 0dd752a262)
(cherry picked from commit b1f1af7fe0)
(cherry picked from commit 71937deaa5)
(cherry picked from commit 93e41a7823)
(cherry picked from commit f497ed30cf)
(cherry picked from commit bff3346f7d)
(cherry picked from commit 906ae19c0f)
Refs: https://codeberg.org/forgejo/forgejo/pulls/2222
(cherry picked from commit 5f837efc15)
fix: write xml header
(cherry picked from commit a715984a42)
fix: optional elements and xml schema
(cherry picked from commit 6ea6895a36)
fix: pass all other requests to file search
(cherry picked from commit 9bfc74833a)
test: add integration test
(cherry picked from commit b798f4ce86)
fix: use xmlResponse
(cherry picked from commit 7f76df0b24)
(cherry picked from commit e18d574ca4)
- The [rupture](https://github.com/ethantkoenig/rupture) dependency was
essentially outdated in the sense it was using old version of
dependencies.
- The usage by Forgejo was rather a small portion, so that portion is
now vendored (with its tests).
- Removes old dependencies from go.sum (less dependencies is better for
reviewing what the heck we're importing). Just to note that they were
likely not being used by Go's build process (according to
https://go.dev/ref/mod#minimal-version-selection), so it's really a
matter of formal cleaning up dependencies we don't use and therefor
don't want to download and be in our go.sum.
(cherry picked from commit aa72a5f009)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2148
(cherry picked from commit fbe8d65f0b)
(cherry picked from commit e18debcb6a)
Conflicts:
go.sum
https://codeberg.org/forgejo/forgejo/pulls/2245
(cherry picked from commit 8c43c2ada8)
- This is a 'front-port' of the already existing patch on v1.21 and
v1.20, but applied on top of what Gitea has done to rework the LTA
mechanism. Forgejo will stick with the reworked mechanism by the Forgejo
Security team for the time being. The removal of legacy code (AES-GCM) has been
left out.
- The current architecture is inherently insecure, because you can
construct the 'secret' cookie value with values that are available in
the database. Thus provides zero protection when a database is
dumped/leaked.
- This patch implements a new architecture that's inspired from: [Paragonie Initiative](https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies).
- Integration testing is added to ensure the new mechanism works.
- Removes a setting, because it's not used anymore.
(cherry picked from commit e3d6622a63)
(cherry picked from commit fef1a6dac5)
(cherry picked from commit b0c5165145)
(cherry picked from commit 7ad51b9f8d)
(cherry picked from commit 64f053f383)
(cherry picked from commit f5e78e4c20)
Conflicts:
services/auth/auth_token_test.go
https://codeberg.org/forgejo/forgejo/pulls/2069
(cherry picked from commit f69fc23d4b)
(cherry picked from commit d955ab3ab0)
(cherry picked from commit 9220088f90)
(cherry picked from commit c73ac63696)
(cherry picked from commit 747a176048)
Conflicts:
models/user/user.go
routers/web/user/setting/account.go
https://codeberg.org/forgejo/forgejo/pulls/2295
- Add the experimental
[deacode](https://pkg.go.dev/golang.org/x/tools/internal/cmd/deadcode)
linter to Forgejo.
- To deal with false positives that can happen due to build tags or with code
that's currently only referenced by test code, the output of the tool is
compared against a known-good output.
- This commit doesn't make any attempt to remove any deadcode.
(cherry picked from commit ac462279e9)
(cherry picked from commit b5ea6e85ac)
(cherry picked from commit 5915f3643c)
[CLEANUP] Remove deadcode
- This is deadcode since https://codeberg.org/forgejo/forgejo/pulls/1802
removed the usage of it.
(cherry picked from commit d840b9923e)
(cherry picked from commit 9442bab626)
(cherry picked from commit 0de9d18863)
(cherry picked from commit 26abf78374)
(cherry picked from commit 05d3a143c3)
(cherry picked from commit 4b3d38d5e1)
(cherry picked from commit a726e71986)
(cherry picked from commit cb62ae5b98)
(cherry picked from commit 8195ba06d5)
(cherry picked from commit 4570fb591a)
(cherry picked from commit 1f4d33de2b)
This field adds the possibility to set the update date when modifying
an issue through the API.
A 'NoAutoDate' in-memory field is added in the Issue struct.
If the update_at field is set, NoAutoDate is set to true and the
Issue's UpdatedUnix field is filled.
That information is passed down to the functions that actually updates
the database, which have been modified to not auto update dates if
requested.
A guard is added to the 'EditIssue' API call, to checks that the
udpate_at date is between the issue's creation date and the current
date (to avoid 'malicious' changes). It also limits the new feature
to project's owners and admins.
(cherry picked from commit c524d33402)
Add a SetIssueUpdateDate() function in services/issue.go
That function is used by some API calls to set the NoAutoDate and
UpdatedUnix fields of an Issue if an updated_at date is provided.
(cherry picked from commit f061caa655)
Add an updated_at field to the API calls related to Issue's Labels.
The update date is applied to the issue's comment created to inform
about the modification of the issue's labels.
(cherry picked from commit ea36cf80f5)
Add an updated_at field to the API call for issue's attachment creation
The update date is applied to the issue's comment created to inform
about the modification of the issue's content, and is set as the
asset creation date.
(cherry picked from commit 96150971ca)
Checking Issue changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPIEditIssueWithAutoDate
- TestAPIEditIssueWithNoAutoDate
- TestAPIAddIssueLabelsWithAutoDate
- TestAPIAddIssueLabelsWithNoAutoDate
- TestAPICreateIssueAttachmentWithAutoDate
- TestAPICreateIssueAttachmentWithNoAutoDate
(cherry picked from commit 4926a5d7a2)
Add an updated_at field to the API call for issue's comment creation
The update date is used as the comment creation date, and is applied to
the issue as the update creation date.
(cherry picked from commit 76c8faecdc)
Add an updated_at field to the API call for issue's comment edition
The update date is used as the comment update date, and is applied to
the issue as an update date.
(cherry picked from commit cf787ad7fd)
Add an updated_at field to the API call for comment's attachment creation
The update date is applied to the comment, and is set as the asset
creation date.
(cherry picked from commit 1e4ff424d3)
Checking Comment changes, with and without providing an updated_at date
Those unit tests are added:
- TestAPICreateCommentWithAutoDate
- TestAPICreateCommentWithNoAutoDate
- TestAPIEditCommentWithAutoDate
- TestAPIEditCommentWithNoAutoDate
- TestAPICreateCommentAttachmentWithAutoDate
- TestAPICreateCommentAttachmentWithNoAutoDate
(cherry picked from commit da932152f1)
Pettier code to set the update time of comments
Now uses sess.AllCols().NoAutoToime().SetExpr("updated_unix", ...)
XORM is smart enough to compose one single SQL UPDATE which all
columns + updated_unix.
(cherry picked from commit 1f6a42808d)
Issue edition: Keep the max of the milestone and issue update dates.
When editing an issue via the API, an updated_at date can be provided.
If the EditIssue call changes the issue's milestone, the milestone's
update date is to be changed accordingly, but only with a greater
value.
This ensures that a milestone's update date is the max of all issue's
update dates.
(cherry picked from commit 8f22ea182e)
Rewrite the 'AutoDate' tests using subtests
Also add a test to check the permissions to set a date, and a test
to check update dates on milestones.
The tests related to 'AutoDate' are:
- TestAPIEditIssueAutoDate
- TestAPIAddIssueLabelsAutoDate
- TestAPIEditIssueMilestoneAutoDate
- TestAPICreateIssueAttachmentAutoDate
- TestAPICreateCommentAutoDate
- TestAPIEditCommentWithDate
- TestAPICreateCommentAttachmentAutoDate
(cherry picked from commit 961fd13c55)
(cherry picked from commit d52f4eea44)
(cherry picked from commit 3540ea2a43)
Conflicts:
services/issue/issue.go
https://codeberg.org/forgejo/forgejo/pulls/1415
(cherry picked from commit 56720ade00)
Conflicts:
routers/api/v1/repo/issue_label.go
https://codeberg.org/forgejo/forgejo/pulls/1462
(cherry picked from commit 47c78927d6)
(cherry picked from commit 2030f3b965)
(cherry picked from commit f02aeb7698)
Conflicts:
routers/api/v1/repo/issue_attachment.go
routers/api/v1/repo/issue_comment_attachment.go
https://codeberg.org/forgejo/forgejo/pulls/1575
(cherry picked from commit d072525b35)
(cherry picked from commit 8424d0ab3d)
(cherry picked from commit 5cc62caec7)
(cherry picked from commit d6300d5dcd)
[FEAT] allow setting the update date on issues and comments (squash) apply the 'update_at' value to the cross-ref comments (#1676)
[this is a follow-up to PR #764]
When a comment of issue A referencing issue B is added with a forced 'updated_at' date, that date has to be applied to the comment created in issue B.
-----
Comment:
While trying my 'RoundUp migration script', I found that this case was forgotten in PR #764 - my apologies...
I'll try to write a functional test, base on models/issues/issue_xref_test.go
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1676
Co-authored-by: fluzz <fluzz@freedroid.org>
Co-committed-by: fluzz <fluzz@freedroid.org>
(cherry picked from commit ac4f727f63)
(cherry picked from commit 5110476ee9)
(cherry picked from commit 77ba6be1da)
(cherry picked from commit 9c8337b5c4)
(cherry picked from commit 1d689eb686)
(cherry picked from commit 511c519c87)
(cherry picked from commit 2f0b4a8f61)
(cherry picked from commit fdd4da111c)
[FEAT] allow setting the update date on issues and comments (squash) do not use token= query param
See https://codeberg.org/forgejo/forgejo/commit/33439b733a
(cherry picked from commit c5139a75b9)
(cherry picked from commit c7b572c35d)
(cherry picked from commit aec7503ff6)
(cherry picked from commit 87c65f2a49)
(cherry picked from commit bd47ee33c2)
(cherry picked from commit f3dbd90a74)
(cherry picked from commit 57e597bf7e)
(cherry picked from commit 643a2b0e81)
(cherry picked from commit f10faffb4f)
(cherry picked from commit b440c5767e)
[TESTS] verify facts for the admin storage documentation (squash)
(cherry picked from commit d83d8ce57b)
(cherry picked from commit d8855ef27c)
(cherry picked from commit 11230466ec)
(cherry picked from commit b2cdd9d971)
(cherry picked from commit a0a5e78524)
(cherry picked from commit 846413110f)
(cherry picked from commit 72b92d5a78)
(cherry picked from commit 7e039a9427)
(cherry picked from commit 227d42a1b6)
(cherry picked from commit 6488950a9b)
(cherry picked from commit 0285c99774)
(cherry picked from commit 0527bb20db)
(cherry picked from commit b4d3fd43e3)
(cherry picked from commit b45db64300)
(cherry picked from commit 722ab37611)
(cherry picked from commit ff45632b42)
(cherry picked from commit 5144ae2aa7)
(cherry picked from commit f51438cd68)
(cherry picked from commit 5ec304e5a1)
(cherry picked from commit 440b8c1af1)
(cherry picked from commit e5bbc626c1)
(cherry picked from commit a996fe0fe4)
Follow-up to d58c542579 for Forgejo.
By default, Gitea does not select any map service that can be used
to introduce a 'Show this place on a map' button in the location
field of a user profile. Before I tried upstreaming this change to
Gitea, this was the case in Forgejo. This patch essentially recovers
this functionality, which is nice for public-facing instances and
communities.
Links to original PRs:
- https://codeberg.org/forgejo/forgejo/pulls/1076
- https://github.com/go-gitea/gitea/pull/26214
(cherry picked from commit bb187d5f61)
(cherry picked from commit ce02ef9078)
(cherry picked from commit 6b75c40e25)
(cherry picked from commit 6bc8e9f573)
(cherry picked from commit 063f8afdf7)
(cherry picked from commit c5cc736b72)
(cherry picked from commit 7b1bb4bedc)
(cherry picked from commit 2a022dceb4)
(cherry picked from commit a946c142d2)
(cherry picked from commit 8a4ea0c7ab)
(cherry picked from commit 37bfb05b34)
(cherry picked from commit 12fbbb1754)
(cherry picked from commit abe9de2cd9)
(cherry picked from commit 84db578717)
(cherry picked from commit 1beab7af46)
(cherry picked from commit 8779d505f2)
(cherry picked from commit 21a788f2eb)
(cherry picked from commit a7cc6d1687)
(cherry picked from commit 25f840379f)
(cherry picked from commit 0db65f1122)
(cherry picked from commit 0e08cbc854)
(cherry picked from commit 57de51db8d)
(cherry picked from commit 5ab3dcabb1)
(cherry picked from commit 7b5ad0c13b)
(cherry picked from commit adf449a115)
(cherry picked from commit 77aa18227e)
(cherry picked from commit f9d75d4705)
(cherry picked from commit 64f76f4ab2)
(cherry picked from commit 5d02454155)
[CI] Forgejo Actions workflows
(cherry picked from commit 3ff59b5379)
(cherry picked from commit 8af826a6f7)
(cherry picked from commit d7c09d9cc8)
[CI] use the docker label instead of ubuntu-latest
(cherry picked from commit b6a6470db6)
[CI] all tests need compliance before proceeding
(cherry picked from commit b35c496f2c)
(cherry picked from commit 36a4148a8e)
(cherry picked from commit 7ffcffa653)
(cherry picked from commit 8a246d296e)
(cherry picked from commit dd0b6e1826)
[CI] Forgejo Actions based release process (squash) MySQL optimization
Refs: https://codeberg.org/forgejo/forgejo/issues/976
(cherry picked from commit b4b8c489e6)
(cherry picked from commit 1e861db4af)
(cherry picked from commit a6c0e00330)
(cherry picked from commit f97b336465)
(cherry picked from commit 6d65d5f0d6f798556a8f9e547896be03a5ee2f87)
(cherry picked from commit 79bfbadbed)
(cherry picked from commit e86c40a34a)
(cherry picked from commit da0c454adb)
(cherry picked from commit b49d892cda)
[CI] enable minio tests
(cherry picked from commit 4d8f438031)
(cherry picked from commit c4eeb0a61e)
[CI] Forgejo Actions based CI for PR & branches (squash) cleanup
(cherry picked from commit 80eb20e842)
(cherry picked from commit d2ff589858)
(cherry picked from commit f6eedecb67)
(cherry picked from commit cf458091e2)
(cherry picked from commit ddd322cb2d)
(cherry picked from commit f0f5729b64)
Conflicts:
.github/workflows/pull-db-tests.yml
https://codeberg.org/forgejo/forgejo/pulls/1573
(cherry picked from commit bb347aedd4)
(cherry picked from commit 0f5ebe8c3e)
(cherry picked from commit 9101cb4715)
(cherry picked from commit ab118fe4ef)
[CI] Forgejo Actions based CI for PR & branches (squash) use node:20-bookworm
No longer use the custom test-env image, it is unecessary technical
debt.
Also upgrade to bitnami/minio:2023.8.31 to align with what Gitea tests
(cherry picked from commit d9b77fd273)
(cherry picked from commit ef8f099f9e)
(cherry picked from commit 6d3c675d20)
(cherry picked from commit fc00ff45f2)
(cherry picked from commit b7f02b9846)
(cherry picked from commit d23d86e567)
(cherry picked from commit e68e65460c)
(cherry picked from commit 96f93a1fdb)
(cherry picked from commit 2ff3080018)
(cherry picked from commit 8ea00bcff4)
(cherry picked from commit 85be961970)
(cherry picked from commit 387b279fc3)
(cherry picked from commit 219be7aa85)
(cherry picked from commit 929b75ee39)
(cherry picked from commit dd42a30d6a)
(cherry picked from commit 8b11cab677)
(cherry picked from commit be59270696)
(cherry picked from commit e068f8b191)
(cherry picked from commit 7855bb0c60)
(cherry picked from commit 45c4c8f443)
(cherry picked from commit 89520d67ff)
(cherry picked from commit 15eeb417a4)
(cherry picked from commit 6db53a2643)
(cherry picked from commit 2f689b321f)
(cherry picked from commit 04dc478314c3b4927cca78c354ca46ee217f035a)
(cherry picked from commit a554624f40)
(cherry picked from commit abca05f0d1)
(cherry picked from commit dc13e7eb22)
(cherry picked from commit a161c5740e)
(cherry picked from commit 06d33e2773)
(cherry picked from commit f536275161)
(cherry picked from commit 84ac6f314a)
(cherry picked from commit 1e8126edfc)
(cherry picked from commit 0287ac3416)
(cherry picked from commit 3e5fca2aae)
(cherry picked from commit 03b220bfeb)
(cherry picked from commit 1d033f4aaf)
(cherry picked from commit 2ee9e3e9a3)
(cherry picked from commit d28c284993)
(cherry picked from commit 239df83859)
(cherry picked from commit 96ae0c2e5d)
(cherry picked from commit 49aef71b32)
(cherry picked from commit 38b56d108d)
(cherry picked from commit 30f8d9ec3a)
(cherry picked from commit d531861850)
(cherry picked from commit a75707deaa)
(cherry picked from commit b1c73918b2)
(cherry picked from commit 5391917091)
(cherry picked from commit a427f8dae5)
(cherry picked from commit 6ba6f62c7e)
(cherry picked from commit a1381d9146fba42cb97d72d38525fa3e721bfb03)
(cherry picked from commit 74714e0246)
(cherry picked from commit 7749dbfe66)
(cherry picked from commit 4379249711)
(cherry picked from commit a69f55bebf)
(cherry picked from commit 24dd5fbfdb)
(cherry picked from commit dda856d6b8)
(cherry picked from commit bc14f4fa97)
(cherry picked from commit 78fef4f137)
(cherry picked from commit 69e013cc51)
(cherry picked from commit f173c6a273)
(cherry picked from commit 92f9d02547)
(cherry picked from commit c99d51e665)
(cherry picked from commit aa0650fd2b)
(cherry picked from commit 0a8ef91302)
(cherry picked from commit 7b54fe01c2)
(cherry picked from commit 0e154f366f)
(cherry picked from commit 02d88ee16d)
(cherry picked from commit 411924e017)
(cherry picked from commit f4e9ca6db5)
(cherry picked from commit cd80126a23)
(cherry picked from commit da626702f9)
(cherry picked from commit 4b81d0bd04)
(cherry picked from commit 53ac260669)
(cherry picked from commit 984081f08d)
(cherry picked from commit 1c39bae3ec)
(cherry picked from commit e1bbfa3619)
(cherry picked from commit 91245ca917)
(cherry picked from commit 705d0558be)
(cherry picked from commit 9247594970)
(cherry picked from commit 9db1158a48)
(cherry picked from commit 3b36b77d87)
(cherry picked from commit 162fa1d8ae)
(cherry picked from commit d03d0afbb5)
(cherry picked from commit 7b8f92f787)
(cherry picked from commit 035abca969)
(cherry picked from commit a8fbf6bb56)
(cherry picked from commit 3be681d037b07880236cae1aa70245e5eb4d1497)
(cherry picked from commit 7e5d471c83)
(cherry picked from commit 323801d935)
(cherry picked from commit 3fdfe4bfea)
(cherry picked from commit 58a07421a4)
(cherry picked from commit dbb71a4c85)
(cherry picked from commit d442113520)
(cherry picked from commit d3329f01f8)
(cherry picked from commit 069a1d68b8)
(cherry picked from commit 14919e609a)
(cherry picked from commit 49b76be106)
(cherry picked from commit 0fe9f257d2)
(cherry picked from commit b583bebeab)
(cherry picked from commit 5c616e43a6)
(cherry picked from commit 854bcea905)
(cherry picked from commit c2acb181c5)
(cherry picked from commit 1cb07e71d1)
(cherry picked from commit 5d3f09e635)
(cherry picked from commit f8bf1c8d42)
(cherry picked from commit a471ed4576)
(cherry picked from commit 95c755f4e3)
(cherry picked from commit 1d8bc5215f)
(cherry picked from commit 45c1e7b8d0)
(cherry picked from commit 2eb4d93af7)
(cherry picked from commit 98dbce5e14)
(cherry picked from commit fbe2fb5861)
Resolves https://github.com/go-gitea/gitea/issues/28704
Example of an entry in the generated `APKINDEX` file:
```
C:Q1xCO3H9LTTEbhKt9G1alSC87I56c=
P:hello
V:2.12-r1
A:x86_64
T:The GNU Hello program produces a familiar, friendly greeting
U:https://www.gnu.org/software/hello/
L:GPL-3.0-or-later
S:15403
I:36864
o:hello
m:
t:1705934118
D:so:libc.musl-x86_64.so.1
p:cmd:hello=2.12-r1
i:foobar=1.0 !baz
k:42
```
the `i:` and `k:` entries are new.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Fixes #28660
Fixes an admin api bug related to `user.LoginSource`
Fixed `/user/emails` response not identical to GitHub api
This PR unifies the user update methods. The goal is to keep the logic
only at one place (having audit logs in mind). For example, do the
password checks only in one method not everywhere a password is updated.
After that PR is merged, the user creation should be next.
In #28691, schedule plans will be deleted when a repo's actions unit is
disabled. But when the unit is enabled, the schedule plans won't be
created again.
This PR fixes the bug. The schedule plans will be created again when the
actions unit is re-enabled
Renames it to `ENABLED` to be consistent with other settings and
deprecates it.
I believe this change is necessary because other setting groups such as
`attachment`, `cors`, `mailer`, etc. have an `ENABLED` setting, but
`oauth2` is the only one with an `ENABLE` setting, which could cause
confusion for users.
This is no longer a breaking change because `ENABLE` has been set as
deprecated and as an alias to `ENABLED`.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
The `ToUTF8*` functions were stripping BOM, while BOM is actually valid
in UTF8, so the stripping must be optional depending on use case. This
does:
- Add a options struct to all `ToUTF8*` functions, that by default will
strip BOM to preserve existing behaviour
- Remove `ToUTF8` function, it was dead code
- Rename `ToUTF8WithErr` to `ToUTF8`
- Preserve BOM in Monaco Editor
- Remove a unnecessary newline in the textarea value. Browsers did
ignore it, it seems but it's better not to rely on this behaviour.
Fixes: https://github.com/go-gitea/gitea/issues/28743
Related: https://github.com/go-gitea/gitea/issues/6716 which seems to
have once introduced a mechanism that strips and re-adds the BOM, but
from what I can tell, this mechanism was removed at some point after
that PR.
Fix #22066
# Purpose
This PR fix the releases will be deleted when mirror repository sync the
tags.
# The problem
In the previous implementation of #19125. All releases record in
databases of one mirror repository will be deleted before sync.
Ref:
https://github.com/go-gitea/gitea/pull/19125/files#diff-2aa04998a791c30e5a02b49a97c07fcd93d50e8b31640ce2ddb1afeebf605d02R481
# The Pros
This PR introduced a new method which will load all releases from
databases and all tags on git data into memory. And detect which tags
needs to be inserted, which tags need to be updated or deleted. Only
tags releases(IsTag=true) which are not included in git data will be
deleted, only tags which sha1 changed will be updated. So it will not
delete any real releases include drafts.
# The Cons
The drawback is the memory usage will be higher than before if there are
many tags on this repository. This PR defined a special release struct
to reduce columns loaded from database to memory.
This should fix https://github.com/go-gitea/gitea/issues/28927
Technically older versions of Git would support this flag as well, but
per https://github.com/go-gitea/gitea/pull/28466 that's the version
where using it (object-format=sha256) left "experimental" state.
`sha1` is (currently) the default, so older clients should be unaffected
in either case.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
When LFS hooks are present in gitea-repositories, operations like git
push for creating a pull request fail. These repositories are not meant
to include LFS files or git push them, that is handled separately. And
so they should not have LFS hooks.
Installing git-lfs on some systems (like Debian Linux) will
automatically set up /etc/gitconfig to create LFS hooks in repositories.
For most git commands in Gitea this is not a problem, either because
they run on a temporary clone or the git command does not create LFS
hooks.
But one case where this happens is git archive for creating repository
archives. To fix that, add a GIT_CONFIG_NOSYSTEM=1 to disable using the
system configuration for that command.
According to a comment, GIT_CONFIG_NOSYSTEM is not used for all git
commands because the system configuration can be intentionally set up
for Gitea to use.
Resolves #19810, #21148
Sometimes you need to work on a feature which depends on another (unmerged) feature.
In this case, you may create a PR based on that feature instead of the main branch.
Currently, such PRs will be closed without the possibility to reopen in case the parent feature is merged and its branch is deleted.
Automatic target branch change make life a lot easier in such cases.
Github and Bitbucket behave in such way.
Example:
$PR_1$: main <- feature1
$PR_2$: feature1 <- feature2
Currently, merging $PR_1$ and deleting its branch leads to $PR_2$ being closed without the possibility to reopen.
This is both annoying and loses the review history when you open a new PR.
With this change, $PR_2$ will change its target branch to main ($PR_2$: main <- feature2) after $PR_1$ has been merged and its branch has been deleted.
This behavior is enabled by default but can be disabled.
For security reasons, this target branch change will not be executed when merging PRs targeting another repo.
Fixes #27062
Fixes #18408
---------
Co-authored-by: Denys Konovalov <kontakt@denyskon.de>
Co-authored-by: delvh <dev.lh@web.de>
Fixes #26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes #27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fix #28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix #28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
In #26365 issue references were disabled entirely for documents,
intending to match GitHub behavior. However cross-references do appear
to work in documents on GitHub.
This is useful for example to write release notes in a markdown document
and reference issues. While the simpler syntax may create links when not
intended, hopefully the cross-reference syntax is unique enough to avoid
it.
The CORS code has been unmaintained for long time, and the behavior is
not correct.
This PR tries to improve it. The key point is written as comment in
code. And add more tests.
Fix #28515
Fix #27642
Fix #17098
Fix #28526, regression of
* #26365
(although the author of #26365 has recent activities, but there is no
response for the regression, so I proposed this quick fix and keep the
fix simple to make it easier to backport to 1.21)
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- Modify the `Password` field in `CreateUserOption` struct to remove the
`Required` tag
- Update the `v1_json.tmpl` template to include the `email` field and
remove the `password` field
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Update golang.org/x/crypto for CVE-2023-48795 and update other packages.
`go-git` is not updated because it needs time to figure out why some
tests fail.
- If a topic has zero repository count, it means that none of the
repositories are using that topic, that would make them 'useless' to
keep. One caveat is that if that topic is going to be used in the
future, it will be added again to the database, but simply with a new
ID.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1964
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
- When a repository is orphaned and has objects stored in any of the
storages such as repository avatar or attachments the delete function
would error, because the storage module wasn't initalized.
- Add code to initialize the storage module.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1954
Co-authored-by: Gusted <postmaster@gusted.xyz>
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
## Changes
- Add deprecation warning to `Token` and `AccessToken` authentication
methods in swagger.
- Add deprecation warning header to API response. Example:
```
HTTP/1.1 200 OK
...
Warning: token and access_token API authentication is deprecated
...
```
- Add setting `DISABLE_QUERY_AUTH_TOKEN` to reject query string auth
tokens entirely. Default is `false`
## Next steps
- `DISABLE_QUERY_AUTH_TOKEN` should be true in a subsequent release and
the methods should be removed in swagger
- `DISABLE_QUERY_AUTH_TOKEN` should be removed and the implementation of
the auth methods in question should be removed
## Open questions
- Should there be further changes to the swagger documentation?
Deprecation is not yet supported for security definitions (coming in
[OpenAPI Spec version
3.2.0](https://github.com/OAI/OpenAPI-Specification/issues/2506))
- Should the API router logger sanitize urls that use `token` or
`access_token`? (This is obviously an insufficient solution on its own)
---------
Co-authored-by: delvh <dev.lh@web.de>
1. Do not sort the "checks" slice again and again when "Register", it
just wastes CPU when the Gitea instance runs
2. If a check doesn't exist, tell the end user
3. Add some tests
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
It will fix #28268 .
<img width="1313" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/cb1e07d5-7a12-4691-a054-8278ba255bfc">
<img width="1318" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/4fd60820-97f1-4c2c-a233-d3671a5039e9">
## ⚠️ BREAKING ⚠️
But need to give up some features:
<img width="1312" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/281c0d51-0e7d-473f-bbed-216e2f645610">
However, such abandonment may fix #28055 .
## Backgroud
When the user switches the dashboard context to an org, it means they
want to search issues in the repos that belong to the org. However, when
they switch to themselves, it means all repos they can access because
they may have created an issue in a public repo that they don't own.
<img width="286" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/182dcd5b-1c20-4725-93af-96e8dfae5b97">
It's a confusing design. Think about this: What does "In your
repositories" mean when the user switches to an org? Repos belong to the
user or the org?
Whatever, it has been broken by #26012 and its following PRs. After the
PR, it searches for issues in repos that the dashboard context user owns
or has been explicitly granted access to, so it causes #28268.
## How to fix it
It's not really difficult to fix it. Just extend the repo scope to
search issues when the dashboard context user is the doer. Since the
user may create issues or be mentioned in any public repo, we can just
set `AllPublic` to true, which is already supported by indexers. The DB
condition will also support it in this PR.
But the real difficulty is how to count the search results grouped by
repos. It's something like "search issues with this keyword and those
filters, and return the total number and the top results. **Then, group
all of them by repo and return the counts of each group.**"
<img width="314" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/5206eb20-f8f5-49b9-b45a-1be2fcf679f4">
Before #26012, it was being done in the DB, but it caused the results to
be incomplete (see the description of #26012).
And to keep this, #26012 implement it in an inefficient way, just count
the issues by repo one by one, so it cannot work when `AllPublic` is
true because it's almost impossible to do this for all public repos.
1bfcdeef4c/modules/indexer/issues/indexer.go (L318-L338)
## Give up unnecessary features
We may can resovle `TODO: use "group by" of the indexer engines to
implement it`, I'm sure it can be done with Elasticsearch, but IIRC,
Bleve and Meilisearch don't support "group by".
And the real question is, does it worth it? Why should we need to know
the counts grouped by repos?
Let me show you my search dashboard on gitea.com.
<img width="1304" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2bca2d46-6c71-4de1-94cb-0c9af27c62ff">
I never think the long repo list helps anything.
And if we agree to abandon it, things will be much easier. That is this
PR.
## TODO
I know it's important to filter by repos when searching issues. However,
it shouldn't be the way we have it now. It could be implemented like
this.
<img width="1316" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/99ee5f21-cbb5-4dfe-914d-cb796cb79fbe">
The indexers support it well now, but it requires some frontend work,
which I'm not good at. So, I think someone could help do that in another
PR and merge this one to fix the bug first.
Or please block this PR and help to complete it.
Finally, "Switch dashboard context" is also a design that needs
improvement. In my opinion, it can be accomplished by adding filtering
conditions instead of "switching".
The summary string ends up in the database, and (at least) MySQL &
PostgreSQL require valid UTF8 strings.
Fixes #28178
Co-authored-by: Darrin Smart <darrin@filmlight.ltd.uk>
Previously only the first term had to be matched. That default
Meilisearch behavior makes sense for e.g. some kind of autocomplete to
find and select a single result. But for filtering issues it means you
can't narrow down results by adding more terms.
This is also more consistent with other indexers and GitHub.
---
Reference:
https://www.meilisearch.com/docs/reference/api/search#matching-strategy
The git command may operate the git directory (add/remove) files in any
time.
So when the code iterates the directory, some files may disappear during
the "walk". All "IsNotExist" errors should be ignored.
Fix #26765
gitea doctor failed at checking and fixing 'delete-orphaned-repos',
because table name 'user' needs quoting to be correctly recognized by at
least PostgreSQL.
fixes #28199
- Currently the repository description uses the same sanitizer as a
normal markdown document. This means that element such as heading and
images are allowed and can be abused.
- Create a minimal restricted sanitizer for the repository description,
which only allows what the postprocessor currently allows, which are
links and emojis.
- Added unit testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1202
- Resolves https://codeberg.org/Codeberg/Community/issues/1122
(cherry picked from commit 631c87cc23)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix #25473
Although there was `m.Post("/login/oauth/access_token", CorsHandler()...`,
it never really worked, because it still lacks the "OPTIONS" handler.
Fixes #27819
We have support for two factor logins with the normal web login and with
basic auth. For basic auth the two factor check was implemented at three
different places and you need to know that this check is necessary. This
PR moves the check into the basic auth itself.
- On user deletion, delete action runners that the user has created.
- Add a database consistency check to remove action runners that have
nonexistent belonging owner.
- Resolves https://codeberg.org/forgejo/forgejo/issues/1720
(cherry picked from commit 009ca7223d)
Co-authored-by: Gusted <postmaster@gusted.xyz>
This patchset changes the connection string builder to use net.URL and
the host/port parser to use the stdlib function for splitting host from
port. It also adds a footnote about a potentially required portnumber
for postgres UNIX sockets.
Fixes: #24552
This PR adds a prefix path for all minio storage and override base path
will override the path.
The previous behavior is undefined officially, so it will be marked as
breaking.
After many refactoring PRs for the "locale" and "template context
function", now the ".locale" is not needed for web templates any more.
This PR does a clean up for:
1. Remove `ctx.Data["locale"]` for web context.
2. Use `ctx.Locale` in `500.tmpl`, for consistency.
3. Add a test check for `500 page` locale usage.
4. Remove the `Str2html` and `DotEscape` from mail template context
data, they are copy&paste errors introduced by #19169 and #16200 . These
functions are template functions (provided by the common renderer), but
not template data variables.
5. Make email `SendAsync` function mockable (I was planning to add more
tests but it would make this PR much too complex, so the tests could be
done in another PR)
See https://github.com/go-gitea/gitea/pull/27718#issuecomment-1773743014
. Add a test to ensure its behavior.
Why this test uses `ProjectBoardID=0`? Because in `SearchOptions`,
`ProjectBoardID=0` means what it is. But in `IssueOptions`,
`ProjectBoardID=0` means there is no condition, and
`ProjectBoardID=db.NoConditionID` means the board ID = 0.
It's really confusing. Probably it's better to separate the db search
engine and the other issue search code. It's really two different
systems. As far as I can see, `IssueOptions` is not necessary for most
of the code, which has very simple issue search conditions.
1. remove unused function `MoveIssueAcrossProjectBoards`
2. extract the project board condition into a function
3. use db.NoCondition instead of -1. (BTW, the usage of db.NoCondition
is too confusing. Is there any way to avoid that?)
4. remove the unnecessary comment since the ctx refactor is completed.
5. Change `b.ID != 0` to `b.ID > 0`. It's more intuitive but I think
they're the same since board ID can't be negative.
When `webhook.PROXY_URL` has been set, the old code will check if the
proxy host is in `ALLOWED_HOST_LIST` or reject requests through the
proxy. It requires users to add the proxy host to `ALLOWED_HOST_LIST`.
However, it actually allows all requests to any port on the host, when
the proxy host is probably an internal address.
But things may be even worse. `ALLOWED_HOST_LIST` doesn't really work
when requests are sent to the allowed proxy, and the proxy could forward
them to any hosts.
This PR fixes it by:
- If the proxy has been set, always allow connectioins to the host and
port.
- Check `ALLOWED_HOST_LIST` before forwarding.
Closes #27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
Fix #27541
The INI package has a quirk: by default, the keys are inherited.
When maintaining the keys, the newly added sub key should not be
affected by the parent key.
Part of https://github.com/go-gitea/gitea/issues/27097:
- `gitea` theme is renamed to `gitea-light`
- `arc-green` theme is renamed to `gitea-dark`
- `auto` theme is renamed to `gitea-auto`
I put both themes in separate CSS files, removing all colors from the
base CSS. Existing users will be migrated to the new theme names. The
dark theme recolor will follow in a separate PR.
## ⚠️ BREAKING ⚠️
1. If there are existing custom themes with the names `gitea-light` or
`gitea-dark`, rename them before this upgrade and update the `theme`
column in the `user` table for each affected user.
2. The theme in `<html>` has moved from `class="theme-name"` to
`data-theme="name"`, existing customizations that depend on should be
updated.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
With this PR we added the possibility to configure the Actions timeouts
values for killing tasks/jobs.
Particularly this enhancement is closely related to the `act_runner`
configuration reported below:
```
# The timeout for a job to be finished.
# Please note that the Gitea instance also has a timeout (3h by default) for the job.
# So the job could be stopped by the Gitea instance if it's timeout is shorter than this.
timeout: 3h
```
---
Setting the corresponding key in the INI configuration file, it is
possible to let jobs run for more than 3 hours.
Signed-off-by: Francesco Antognazza <francesco.antognazza@gmail.com>
Part of #27065
This PR touches functions used in templates. As templates are not static
typed, errors are harder to find, but I hope I catch it all. I think
some tests from other persons do not hurt.
Follow #23465 and #25624
This PR introduces the following improvements:
- We do not need to call `GetTags` to get tags because tags have been
loaded by `RepoAssignment`
ef90fdbd1d/modules/context/repo.go (L663-L668)
- Similarly, the number of tags and releases also have been loaded by
`RepoAssignment`, so the related code has been removed from the
handlers. The query condition of `GetReleaseCountByRepoID` in
`RepoAssignment` has been changed to include draft releases.
ef90fdbd1d/modules/context/repo.go (L538-L551)
- `releasesOrTags` function has been removed. The code for rendering
releases list and tags list moved to `Releases` and `TagList`
respectively.
This PR removed `unittest.MainTest` the second parameter
`TestOptions.GiteaRoot`. Now it detects the root directory by current
working directory.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
I noticed, that the push mirrors endpoint, is the only endpoint which
returns the times in long format rather than as time.Time().
I think the behavior should be consistent across the project.
----
## ⚠️ BREAKING ⚠️
This PR changes the time format used in API responses for all
push_mirror endpoints which return a push mirror.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
- Refactor lfs request code
- The original code uses `performRequest` function to create the
request, uses a callback to modify the request, and then send the
request.
- Now it's replaced with `createRequest` that only creates request and
`performRequest` that only sends the request.
- Reuse `createRequest` and `performRequest` in `http_client.go` and
`transferadapter.go`
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Closes #26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds a new field `RemoteAddress` to both mirror types which
contains the sanitized remote address for easier (database) access to
that information. Will be used in the audit PR if merged.
As described in the title.
Some points:
1. Why need those tests?
Because `buildIssueOverview` is not well tested, there are several
continuous bugs in the issue overview webpage.
2. Why in indexer_test.go?
It's hard to put those tests in `./modules/indexer/issue/db/db_test.go`
because those tests need 'real' data in db mocked by fixtures instead of
random data in `./modules/indexer/issue/internal/tests`. When using
'real' data(`unittest.PrepareTestDatabase`), `InitIssueIndexer` and the
package `init()` function of `indexer` are required to init indexer.
3. Why only db?
The other three indexer engines are well tested by random data and it's
okay to also test them with 'real' data in db mocked by fixtures. Any
follow-up PR is welcome.
4. Those tests are really basic, any more complicated tests are welcome.
5. I think it's also necessary to add tests in `TestAPISearchIssues`
in`api_test_issue.go` and `TestIssues` in `home_test.go`
Part of #27065
This reduces the usage of `db.DefaultContext`. I think I've got enough
files for the first PR. When this is merged, I will continue working on
this.
Considering how many files this PR affect, I hope it won't take to long
to merge, so I don't end up in the merge conflict hell.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Since the issue indexer has been refactored, the issue overview webpage
is built by the `buildIssueOverview` function and underlying
`indexer.Search` function and `GetIssueStats` instead of
`GetUserIssueStats`. So the function is no longer used.
I moved the relevant tests to `indexer_test.go` and since the search
option changed from `IssueOptions` to `SearchOptions`, most of the tests
are useless now.
We need more tests about the db indexer because those tests are highly
connected with the issue overview webpage and now this page has several
bugs.
Any advice about those test cases is appreciated.
---------
Co-authored-by: CaiCandong <50507092+CaiCandong@users.noreply.github.com>
- In org mode you can specify an description for media via the following
syntax `[[description][media link]]`. The description is then used as
title or alt.
- This patch fixes the rendering of the description by seperating the
description and non-description cases and using `org.String()`.
- Added unit tests.
- Inspired by
6eb20dbda9/org/html_writer.go (L406-L427)
- Resolves https://codeberg.org/Codeberg/Community/issues/848
(cherry picked from commit 8b8aab8311)
Co-authored-by: Gusted <postmaster@gusted.xyz>
Fix #26723
Add `ChangeDefaultBranch` to the `notifier` interface and implement it
in `indexerNotifier`. So when changing the default branch,
`indexerNotifier` sends a message to the `indexer queue` to update the
index.
---------
Co-authored-by: techknowlogick <matti@mdranta.net>
Should BucketExists (HeadBucket) fail because of an error related to
the connection rather than the existence of the bucket, no information
is available and the admin is left guessing.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_HeadBucket.html
> This action is useful to determine if a bucket exists and you have
> permission to access it. The action returns a 200 OK if the bucket
> exists and you have permission to access it.
>
> If the bucket does not exist or you do not have permission to access
> it, the HEAD request returns a generic 400 Bad Request, 403
> Forbidden or 404 Not Found code. A message body is not included, so
> you cannot determine the exception beyond these error codes.
GetBucketVersioning is used instead and exclusively dedicated to
asserting if using the connection does not return a BadRequest.
If it does the NewMinioStorage logs an error and returns. Otherwise
it keeps going knowing that BucketExists is not going to fail for
reasons unrelated to the existence of the bucket and the permissions
to access it.
(cherry picked from commit d1df4b3bc62e5e61893a923f1c4b58f084eb03af)
Refs: https://codeberg.org/forgejo/forgejo/issues/1338
Unfortunately, when a system setting hasn't been stored in the database,
it cannot be cached.
Meanwhile, this PR also uses context cache for push email avatar display
which should avoid to read user table via email address again and again.
According to my local test, this should reduce dashboard elapsed time
from 150ms -> 80ms .
If the AppURL(ROOT_URL) is an HTTPS URL, then the COOKIE_SECURE's
default value should be true.
And, if a user visits an "http" site with "https" AppURL, they won't be
able to login, and they should have been warned. The only problem is
that the "language" can't be set either in such case, while I think it
is not a serious problem, and it could be fixed easily if needed.
A set of terminology, along with a broader description, can help more
people engage with the Gitea queue system, providing insights and
ensuring its correct use.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This feature was removed by #22219 to avoid possible CSRF attack.
This PR takes reverseproxy auth for API back but with default disabled.
To prevent possbile CSRF attack, the responsibility will be the
reverseproxy but not Gitea itself.
For those want to enable this `ENABLE_REVERSE_PROXY_AUTHENTICATION_API`,
they should know what they are doing.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
1. The `og:description` should be "a one to two sentence description of
your object"
* It shouldn't output all the user inputted content -- it would be
pretty huge.
* Maybe it only needs at most 300 bytes.
2. Do not render commit message as HTML
- While doing some sanity checks over OpenSSH's code for how they handle
certificates authentication. I stumbled on an condition that checks the
certificate type is really an user certificate on the server-side
authentication. This checks seems to be a formality and just for the
sake of good domain seperation, because an user and host certificate
don't differ in their generation, verification or flags that can be
included.
- Add this check to the builtin SSH server to stay close to the
unwritten SSH specification.
- This is an breaking change for setups where the builtin SSH server is
being used and for some reason host certificates were being used for
authentication.
-
(cherry picked from commit de35b141b7)
Refs: https://codeberg.org/forgejo/forgejo/pulls/1172
## ⚠️ BREAKING ⚠️
Like OpenSSH, the built-in SSH server will now only accept SSH user
certificates, not server certificates.
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
1. The old `prepareQueryArg` did double-unescaping of form value.
2. By the way, remove the unnecessary `ctx.Flash = ...` in
`MockContext`.
Co-authored-by: Giteabot <teabot@gitea.io>
Just like `models/unittest`, the testing helper functions should be in a
separate package: `contexttest`
And complete the TODO:
> // TODO: move this function to other packages, because it depends on
"models" package
Backtick syntax now works in repo description too. Also, I replaced the
CSS for this was a new single class, making it more flexible and not
dependent on a parent. Also, very slightly reduced font size from 16.8px
to 16px.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
From the Go specification:
> "1. For a nil slice, the number of iterations is 0."
https://go.dev/ref/spec#For_range
Therefore, an additional nil check for before the loop is unnecessary.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Related to: #8312#26491
In migration v109, we only added a new column `CanCreateOrgRepo` in Team
table, but not initial the value of it.
This may cause bug like #26491.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
According to the GitHub API Spec:
https://docs.github.com/en/rest/actions/secrets?apiVersion=2022-11-28#create-or-update-an-organization-secret
Merge the Create and Update secret into a single API.
- Remove the `CreateSecretOption` struct and replace it with
`CreateOrUpdateSecretOption` in `modules/structs/secret.go`
- Update the `CreateOrUpdateOrgSecret` function in
`routers/api/v1/org/action.go` to use `CreateOrUpdateSecretOption`
instead of `UpdateSecretOption`
- Remove the `CreateOrgSecret` function in
`routers/api/v1/org/action.go` and replace it with
`CreateOrUpdateOrgSecret`
- Update the Swagger documentation in
`routers/api/v1/swagger/options.go` and `templates/swagger/v1_json.tmpl`
to reflect the changes in the struct names and function names
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
The web context (modules/context.Context) is quite complex, it's
difficult for the callers to initialize correctly.
This PR introduces a `NewWebContext` function, to make sure the web
context have the same behavior for different cases.
- Resolves https://codeberg.org/forgejo/forgejo/issues/580
- Return a `upload_field` to any release API response, which points to
the API URL for uploading new assets.
- Adds unit test.
- Adds integration testing to verify URL is returned correctly and that
upload endpoint actually works
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Hi,
We'd like to add merge files files to GetCommitFileStatus fucntions so
API returns the list of all the files associated to a merged pull
request commit, like GitHub API does.
The list of affectedFiles for an API commit is fetched from toCommit()
function in routers/api/v1/repo/commits.go, and API was returning no
file in case of a pull request with no conflict, or just files
associated to the confict resolution, but NOT the full list of merged
files.
This would lead to situations where a CI polling a repo for changes
could miss some file changes due to API returning an empty / partial
list in case of such merged pull requests. (Hope this makes sense :) )
NOTE: I'd like to add a unittest in
integrations/api_repo_git_commits_test.go but failed to understand how
to add my own test bare repo so I can make a test on a merged pull
request commit to check for affectedFiles.
Is there a merged pull request in there that I could use maybe?
Could someone please direct me to the relevant ressources with
informations on how to do that please?
Thanks for your time,
Laurent.
---------
Co-authored-by: Thomas Desveaux <desveaux.thomas@gmail.com>
Replace #22751
1. only support the default branch in the repository setting.
2. autoload schedule data from the schedule table after starting the
service.
3. support specific syntax like `@yearly`, `@monthly`, `@weekly`,
`@daily`, `@hourly`
## How to use
See the [GitHub Actions
document](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#schedule)
for getting more detailed information.
```yaml
on:
schedule:
- cron: '30 5 * * 1,3'
- cron: '30 5 * * 2,4'
jobs:
test_schedule:
runs-on: ubuntu-latest
steps:
- name: Not on Monday or Wednesday
if: github.event.schedule != '30 5 * * 1,3'
run: echo "This step will be skipped on Monday and Wednesday"
- name: Every time
run: echo "This step will always run"
```
Signed-off-by: Bo-Yi.Wu <appleboy.tw@gmail.com>
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR has multiple parts, and I didn't split them because
it's not easy to test them separately since they are all about the
dashboard page for issues.
1. Support counting issues via indexer to fix #26361
2. Fix repo selection so it also fixes #26653
3. Keep keywords in filter links.
The first two are regressions of #26012.
After:
https://github.com/go-gitea/gitea/assets/9418365/71dfea7e-d9e2-42b6-851a-cc081435c946
Thanks to @CaiCandong for helping with some tests.
- Add a new `CreateSecretOption` struct for creating secrets
- Implement a `CreateOrgSecret` function to create a secret in an
organization
- Add a new route in `api.go` to handle the creation of organization
secrets
- Update the Swagger template to include the new `CreateOrgSecret` API
endpoint
---------
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Previously, `err` was defined above, checked for `err == nil` and used
nowhere else.
Hence, the result of `convertMinioErr` would always be `nil`.
This leads to a NPE further down the line.
That is not intentional, it should convert the error of the most recent
operation, not one of its predecessors.
Found through
https://discord.com/channels/322538954119184384/322538954119184384/1143185780206993550.
- Added new tests to cover corner cases
- Replace existing regex with new one
Closes #26551
---
As @silverwind suggested, I started from
[validate-npm-package-name](https://github.com/npm/validate-npm-package-name),
but found this solution too complicated.
Then I tried to fix existing regex myself, but thought, that exclude all
restricted symbols is harder, than set only allowed symbols.
Then I search a bit more and found
[package-name-regex](https://github.com/dword-design/package-name-regex)
and regex from it works for all new test cases.
Let me know, if more information or help with this PR is needed.
Fix #26536
Follow #26012
Whatever the comment type is, always update the issue indexer. So the
issue indexer will be updated when there is a change in Status,
Assignee, Label, and so on.
I added the logic for `NotifyUpdateComment`, but missed it for
`NotifyCreateIssueComment` and `NotifyDeleteComment`.
- Add a new function `CountOrgSecrets` in the file
`models/secret/secret.go`
- Add a new file `modules/structs/secret.go`
- Add a new function `ListActionsSecrets` in the file
`routers/api/v1/api.go`
- Add a new file `routers/api/v1/org/action.go`
- Add a new function `listActionsSecrets` in the file
`routers/api/v1/org/action.go`
go-sdk: https://gitea.com/gitea/go-sdk/pulls/629
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: Giteabot <teabot@gitea.io>
"ogg" is just a "container" format for audio and video.
Golang's `DetectContentType` only reports "application/ogg" for
potential ogg files.
Actually it could do more "guess" to see whether it is a audio file or a
video file.
## Archived labels
This adds the structure to allow for archived labels.
Archived labels are, just like closed milestones or projects, a medium to hide information without deleting it.
It is especially useful if there are outdated labels that should no longer be used without deleting the label entirely.
## Changes
1. UI and API have been equipped with the support to mark a label as archived
2. The time when a label has been archived will be stored in the DB
## Outsourced for the future
There's no special handling for archived labels at the moment.
This will be done in the future.
## Screenshots
Part of https://github.com/go-gitea/gitea/issues/25237
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR rewrites the function `getStorage` and make it more clear.
Include tests from #26435, thanks @earl-warren
---------
Co-authored-by: Earl Warren <contact@earl-warren.org>
Close stdout correctly for "git blame", otherwise the failed "git blame"
would case the request hanging forever.
And "os.Stderr" should never (seldom) be used as git command's stderr
When users put the secrets into a file (GITEA__sec__KEY__FILE), the
newline sometimes is different to avoid (eg: echo/vim/...)
So the last newline could be removed when reading, it makes the users
easier to maintain the secret files.
Co-authored-by: Giteabot <teabot@gitea.io>
For some reason, the permission of the client_id and secret may cannot
create bucket, so now we will check whether bucket does exist first and
then try to create a bucket if it doesn't exist.
Try to fix #25984
Co-authored-by: silverwind <me@silverwind.io>
In the `RepoRefForAPI()` context function `CommitID` is not set if `ref`
is used. It is set correctly for other if/else branches where `Commit`
is set. It doesn't appear that any routes that use `RepoRefForAPI()`
also use `CommitID` but that may be the case in the future.
## Changes
- Sets `ctx.Repo.CommitID` when `ref` is explicitly used for api routes
that use `RepoRefForAPI()`
The MinIO client isn't redirecting to the correct AWS endpoint if a
non-default data center is used.
In my use case I created an AWS bucket at `eu-central-1` region. Because
of the missing region initialization of the client the default
`us-east-1` API endpoint is used returning a `301 Moved Permanently`
response that's not handled properly by MinIO client. This in return
aborts using S3 storage on AWS as the `BucketExists()` call will fail
with the http moved error.
MinIO client trace shows the issue:
```text
---------START-HTTP---------
HEAD / HTTP/1.1
Host: xxxxxxxxxxx-prod-gitea-data.s3.dualstack.us-east-1.amazonaws.com
User-Agent: MinIO (windows; amd64) minio-go/v7.0.61
Authorization: AWS4-HMAC-SHA256 Credential=**REDACTED**/20230809/accesspoint.eu-central-1/s3/aws4_request, SignedHeaders=host;x-amz-content-sha256;x-amz-date, Signature=**REDACTED**
X-Amz-Content-Sha256: e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855
X-Amz-Date: 20230809T141143Z
HTTP/1.1 301 Moved Permanently
Connection: close
Content-Type: application/xml
Date: Wed, 09 Aug 2023 14:11:43 GMT
Server: AmazonS3
X-Amz-Bucket-Region: eu-central-1
X-Amz-Id-2: UK7wfeYi0HcTcytNvQ3wTAZ5ZP1mOSMnvRZ9Fz4xXzeNsS47NB/KfFx2unFxo3L7XckHpMNPPVo=
X-Amz-Request-Id: S1V2MJV8SZ11GEVN
---------END-HTTP---------
```
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
This PR is an extended implementation of #25189 and builds upon the
proposal by @hickford in #25653, utilizing some ideas proposed
internally by @wxiaoguang.
Mainly, this PR consists of a mechanism to pre-register OAuth2
applications on startup, which can be enabled or disabled by modifying
the `[oauth2].DEFAULT_APPLICATIONS` parameter in app.ini. The OAuth2
applications registered this way are being marked as "locked" and
neither be deleted nor edited over UI to prevent confusing/unexpected
behavior. Instead, they're being removed if no longer enabled in config.
The implemented mechanism can also be used to pre-register other OAuth2
applications in the future, if wanted.
Co-authored-by: hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
---------
Co-authored-by: M Hickford <mirth.hickford@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There are 2 kinds of ".Editorconfig" in code, one is `JSON string` for
the web edtior, another is `*editorconfig.Editorconfig` for the file
rendering (used by `TabSizeClass`)
This PR distinguish them with different names.
And by the way, change the default tab size from 8 to 4, I think few
people would like to use 8-size tabs nowadays.
Before:
* `{{.locale.Tr ...}}`
* `{{$.locale.Tr ...}}`
* `{{$.root.locale.Tr ...}}`
* `{{template "sub" .}}`
* `{{template "sub" (dict "locale" $.locale)}}`
* `{{template "sub" (dict "root" $)}}`
* .....
With context function: only need to `{{ctx.Locale.Tr ...}}`
The "ctx" could be considered as a super-global variable for all
templates including sub-templates.
To avoid potential risks (any bug in the template context function
package), this PR only starts using "ctx" in "head.tmpl" and
"footer.tmpl" and it has a "DataRaceCheck". If there is anything wrong,
the code can be fixed or reverted easily.
- Currently the post processing will transform all issue indexes (such as `#6`) into a clickable link.
- This makes sense in an situation like issues or PRs,
where referencing to other issues is quite common
and only referencing their issue index is an handy and efficient way to do it.
- Currently this is also run for documents
(which is the user profile and viewing rendered files),
but in those situations it's less common to reference issues by their index and instead could mean something else.
- This patch disables this post processing for issue index for documents. Matches Github's behavior.
- Added unit tests.
- Resolves https://codeberg.org/Codeberg/Community/issues/1120
Co-authored-by: Gusted <postmaster@gusted.xyz>
Follow #25229
Copy from
https://github.com/go-gitea/gitea/pull/26290#issuecomment-1663135186
The bug is that we cannot get changed files for the
`pull_request_target` event. This event runs in the context of the base
branch, so we won't get any changes if we call
`GetFilesChangedSinceCommit` with `PullRequest.Base.Ref`.
Fix #26064
Some git commands should use parent context, otherwise it would exit too
early (by the default timeout, 10m), and the "cmd.Wait" waits till the
pipes are closed.
This PR will fix #26264, caused by #23911.
The package configuration derive is totally wrong when storage type is
local in that PR.
This PR fixed the inherit logic when storage type is local with some
unit tests.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes #26270.
Co-Author: @wxiaoguang
Thanks @lunny for providing this solution
As
https://github.com/go-gitea/gitea/issues/26270#issuecomment-1661695151
said, at present we cannot get the names of changed files correctly when
the `OldCommitID` is `EmptySHA`. In this PR, the `GetCommitFilesChanged`
method is added and will be used to get the changed files by commit ID.
References:
- https://stackoverflow.com/a/424142
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
1. Fix the wrong document (add the missing `MODE=`)
2. Add a more friendly log message to tell users to add `MODE=` in their
config
Co-authored-by: Giteabot <teabot@gitea.io>
Not too important, but I think that it'd be a pretty neat touch.
Also fixes some layout bugs introduced by a previous PR.
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
Co-authored-by: Caesar Schinas <caesar@caesarschinas.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix #24662.
Replace #24822 and #25708 (although it has been merged)
## Background
In the past, Gitea supported issue searching with a keyword and
conditions in a less efficient way. It worked by searching for issues
with the keyword and obtaining limited IDs (as it is heavy to get all)
on the indexer (bleve/elasticsearch/meilisearch), and then querying with
conditions on the database to find a subset of the found IDs. This is
why the results could be incomplete.
To solve this issue, we need to store all fields that could be used as
conditions in the indexer and support both keyword and additional
conditions when searching with the indexer.
## Major changes
- Redefine `IndexerData` to include all fields that could be used as
filter conditions.
- Refactor `Search(ctx context.Context, kw string, repoIDs []int64,
limit, start int, state string)` to `Search(ctx context.Context, options
*SearchOptions)`, so it supports more conditions now.
- Change the data type stored in `issueIndexerQueue`. Use
`IndexerMetadata` instead of `IndexerData` in case the data has been
updated while it is in the queue. This also reduces the storage size of
the queue.
- Enhance searching with Bleve/Elasticsearch/Meilisearch, make them
fully support `SearchOptions`. Also, update the data versions.
- Keep most logic of database indexer, but remove
`issues.SearchIssueIDsByKeyword` in `models` to avoid confusion where is
the entry point to search issues.
- Start a Meilisearch instance to test it in unit tests.
- Add unit tests with almost full coverage to test
Bleve/Elasticsearch/Meilisearch indexer.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Configure `setting.CacheService.TTL` which will force the code to go
trough the caching mechanism.
- Remove the TODO and uncomment the test code.
(cherry picked from commit a201f2f189)
Refs: https://codeberg.org/forgejo/forgejo/pulls/974
---------
Co-authored-by: Gusted <postmaster@gusted.xyz>
- The `NoBetterThan` function can only handle comparisons between
"pending," "success," "error," and "failure." For any other comparison,
we directly return false. This prevents logic errors like the one in
#26121.
- The callers of the `NoBetterThan` function should also avoid making
incomparable calls.
---------
Co-authored-by: yp05327 <576951401@qq.com>
Co-authored-by: puni9869 <80308335+puni9869@users.noreply.github.com>
The JSONRedirect/JSONOK/JSONError functions were put into "Base" context
incorrectly, it would cause abuse.
Actually, they are for "web context" only, so, move them to the correct
place.
And by the way, use them to simplify old code: +75 -196
This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.
<img width="1293" alt="图片"
src="https://github.com/go-gitea/gitea/assets/81045/c33355f0-1ea7-4fb3-ad43-cd23cd15391d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This is a simple PR which moves the `GetListener` function to a
`DefaultGetListener` function, and changes `GetListener` to be a
variable which by default points to the `DefaultGetListener` function.
This allows people who may exist quasi-downstream of Gitea to create
alternate "GetListener" functions, with identical signatures, which
return different implementations of the `net.Listener` interface. This
approach is expressly intended to be non-invasive and have the least
possible impact on the gitea codebase. A previous version of this idea
was rejected before: https://github.com/go-gitea/gitea/issues/15544 but
because of issues like: https://github.com/go-gitea/gitea/issues/22335 I
**really** think that recommending people configure proxies by hand is
exactly the wrong way to do things(This is why there is a Tor Browser.).
This tiny change lets me put proper hidden service configuration into
single `i2p.go` file which lives in `modules/graceful/` and which never
has to be checked in to your codebase or affect your dependencies or
bloat your project in any way, it can live on a branch in my fork and
I'll fast-forward every release and never the twain shall meet.
The main use-case for this is to listen on Peer-to-Peer networks and
Hidden Services directly without error-prone and cumbersome
port-forwarding configuration. For instance, I might implement an
"I2PGetListener" as follows:
```Go
// adapted from i2p.go which is unchecked-in in my modules/graceful/ directory
import "github.com/eyedeekay/onramp"
var garlic = &onramp.Garlic{}
func I2PGetListener(network, address string) (net.Listener, error) {
// Add a deferral to say that we've tried to grab a listener
defer GetManager().InformCleanup()
switch network {
case "tcp", "tcp4", "tcp6", "i2p", "i2pt":
return garlic.Listen()
case "unix", "unixpacket":
// I2P isn't really a replacement for the stuff you use Unix sockets for and it's also not an anonymity risk, so treat them normally
unixAddr, err := net.ResolveUnixAddr(network, address)
if err != nil {
return nil, err
}
return GetListenerUnix(network, unixAddr)
default:
return nil, net.UnknownNetworkError(network)
}
}
```
I could then substitute that GetListener function and be 50% of the way
to having a fully-functioning gitea-over-hidden-services instance
without any additional configuration(The other 50% doesn't require any
code-changes on gitea's part).
There are 2 advantages here, one being convenience, first this turns
hidden services into a zero-configuration option for self-hosting gitea,
and second safety, these Go libraries are passing around
hidden-service-only versions of the net.Addr struct, they're using
hidden-service-only versions of the sockets, which are both expressly
designed to never require access to any information outside the hidden
service network, manipulating the application so it reveals information
about the host becomes much more difficult, and some attacks become
nearly impossible. It also opens up TLS-over-Hidden Services support
which is niche right now, of course, but in a future where gitea
instances federate if hidden services want to be part of the federation
they're probably going to need TLS certificates. They don't need to be
painful to set up.
This doesn't fix an open issue, but it might affect:
- https://github.com/go-gitea/gitea/issues/22335 - my `i2p.go` file
actually has a mod that fixes this but it requires adding a handful of
new dependencies to gitea and isn't compatible with the normal way you
guys recommend using a proxy so I don't think it's ready to send to you
as a PR, but if I can find a non-invasive way to fix it I will.
- https://github.com/go-gitea/gitea/issues/18240
I hereby agree to the Code of Conduct published here:
8b89563bf1/CODE_OF_CONDUCT.md
I have read and understood the recommendations published here:
8b89563bf1/CONTRIBUTING.md
Thank you for your consideration.
---------
Co-authored-by: eyedeekay <idk@mulder>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
If the log file can't be opened, what should it do? panic/exit? ignore
logs? fallback to stderr?
It seems that "fallback to stderr" is slightly better than others ....
To avoid deadlock problem, almost database related functions should be
have ctx as the first parameter.
This PR do a refactor for some of these functions.
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix #25776. Close #25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
The package `github.com/nfnt/resize` is deprecated and archived by the
author. `github.com/oliamb/cutter` is not maintained since 2018. We
could use `golang.org/x/image/draw` instead.
Bumping `github.com/golang-jwt/jwt` from v4 to v5.
`github.com/golang-jwt/jwt` v5 is bringing some breaking changes:
- standard `Valid()` method on claims is removed. It's replaced by
`ClaimsValidator` interface implementing `Validator()` method instead,
which is called after standard validation. Gitea doesn't seem to be
using this logic.
- `jwt.Token` has a field `Valid`, so it's checked in `ParseToken`
function in `services/auth/source/oauth2/token.go`
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: Giteabot <teabot@gitea.io>
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
Move `public/*` to `public/assets/*`
Some old PRs (like #15219) introduced inconsistent directory system.
For example: why the local directory "public" is accessed by
`http://site/assets`? How to serve the ".well-known" files properly in
the public directory?
For convention rules, the "public" directory is widely used for the
website's root directory. It shouldn't be an exception for Gitea.
So, this PR makes the things consistent:
* `http://site/assets/foo` means `{CustomPath}/public/assets/foo`.
* `{CustomPath}/public/.well-known` and `{CustomPath}/public/robots.txt`
can be used in the future.
This PR is also a prerequisite for a clear solution for:
* #21942
* #25892
* discourse.gitea.io: [.well-known path serving custom files behind
proxy?](https://discourse.gitea.io/t/well-known-path-serving-custom-files-behind-proxy/5445/1)
This PR is breaking for users who have custom "public" files (CSS/JS).
After getting approvals, I will update the documents.
----
## ⚠️ BREAKING ⚠️
If you have files in your "custom/public/" folder, please move them to
"custom/public/assets/".
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Giteabot <teabot@gitea.io>
Regression: https://github.com/go-gitea/gitea/pull/24805
Closes: #25945
- Disallow `javascript`, `vbscript` and `data` (data uri images still
work) url schemes even if all other schemes are allowed
- Fixed older `cbthunderlink` tests
---------
Co-authored-by: delvh <dev.lh@web.de>
The "creating dir/file during load config" is a longstanding and complex
problem.
This PR only does a quick patch, it still needs more refactorings in the
future.
Fix #25938
Before, in dev mode, there might be some error logs like:
```
2023/07/17 13:54:51 ...s/assetfs/layered.go:221:WatchLocalChanges() [E] Unable to watch directory .: lstat /data/work/gitea/custom/templates: no such file or directory
```
Because there is no "custom/templates" directory.
After: ignore such error, no such error message anymore.
Got the same problem as #25915 when updating an instance. The
`log.Fatal` should have been marked as breaking in #23911.
This PR adds a notice that the system is shutting down because of the
deprecated setting.
The `FileBlame` function looks strange, it has `revision` as argument
but doesn't use it.
Since the function never be used, I think we could just remove it.
If anyone thinks it should be kept, please help fix `revision`.
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #25580
Fix #19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
To mock a handler:
```go
web.RouteMock(web.MockAfterMiddlewares, func(ctx *context.Context) {
// ...
})
defer web.RouteMockReset()
```
It helps:
* Test the middleware's behavior (assert the ctx.Data, etc)
* Mock the middleware's behavior (prepare some context data for handler)
* Mock the handler's response for some test cases, especially for some
integration tests and e2e tests.
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
A couple of notes:
* Future changes should refactor arguments into a struct
* This filtering only is supported by meilisearch right now
* Issue index number is bumped which will cause a re-index
Fix #25736
Caused by #24048
Right now we only check the activity type for `pull_request` event when
`types` is specified or there are no `types` and filter. If a workflow
only specifies filters but no `types` like this:
```
on:
pull_request:
branches: [main]
```
the workflow will be triggered even if the activity type is not one of
`[opened, reopened, sync]`. We need to check the activity type in this
case.
Co-authored-by: Giteabot <teabot@gitea.io>
Remove unnecessary `if opts.Logger != nil` checks.
* For "CLI doctor" mode, output to the console's "logger.Info".
* For "Web Task" mode, output to the default "logger.Debug", to avoid
flooding the server's log in a busy production instance.
Co-authored-by: Giteabot <teabot@gitea.io>
To record which command is slow, this PR adds a debug log for slow git
operations.
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: delvh <dev.lh@web.de>
Fix regression of #5363 (so long ago).
The old code definded a document mapping for `issueIndexerDocType`, and
assigned it to `BleveIndexerData` as its type. (`BleveIndexerData` has
been renamed to `IndexerData` in #25174, but nothing more.) But the old
code never used `BleveIndexerData`, it wrote the index with an anonymous
struct type. Nonetheless, bleve would use the default auto-mapping for
struct it didn't know, so the indexer still worked. This means the
custom document mapping was always dead code.
The custom document mapping is not useless, it can reduce index storage,
this PR brings it back and disable default mapping to prevent it from
happening again. Since `IndexerData`(`BleveIndexerData`) has JSON tags,
and bleve uses them first, so we should use `repo_id` as the field name
instead of `RepoID`.
I did a test to compare the storage size before and after this, with
about 3k real comments that were migrated from some public repos.
Before:
```text
[ 160] .
├── [ 42] index_meta.json
├── [ 13] rupture_meta.json
└── [ 128] store
├── [6.9M] 00000000005d.zap
└── [256K] root.bolt
```
After:
```text
[ 160] .
├── [ 42] index_meta.json
├── [ 13] rupture_meta.json
└── [ 128] store
├── [3.5M] 000000000065.zap
└── [256K] root.bolt
```
It saves about half the storage space.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes #24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
This prevents the disk from overflowing with auth keys file
Fixes #17117
## ⚠️ BREAKING
This changes the default option for creating a backup of the authorized
key file when an update is made to default to false.
When branch's commit CommitMessage is too long, the column maybe too
short.(TEXT 16K for mysql).
This PR will fix it to only store the summary because these message will
only show on branch list or possible future search?
Resolve #24789
## ⚠️ BREAKING ⚠️
Before this, `DEFAULT_ACTIONS_URL` cound be set to any custom URLs like
`https://gitea.com` or `http://your-git-server,https://gitea.com`, and
the default value was `https://gitea.com`.
But now, `DEFAULT_ACTIONS_URL` supports only
`github`(`https://github.com`) or `self`(the root url of current Gitea
instance), and the default value is `github`.
If it has configured with a URL, an error log will be displayed and it
will fallback to `github`.
Actually, what we really want to do is always make it
`https://github.com`, however, this may not be acceptable for some
instances of internal use, so there's extra support for `self`, but no
more, even `https://gitea.com`.
Please note that `uses: https://xxx/yyy/zzz` always works and it does
exactly what it is supposed to do.
Although it's breaking, I belive it should be backported to `v1.20` due
to some security issues.
Follow-up on the runner side:
- https://gitea.com/gitea/act_runner/pulls/262
- https://gitea.com/gitea/act/pulls/70
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves #25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639
Close #19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
releated to #21820
- Split `Size` in repository table as two new colunms, one is `GitSize`
for git size, the other is `LFSSize` for lfs data. still store full size
in `Size` colunm.
- Show full size on ui, but show each of them by a `title`; example:
- Return full size in api response.
---------
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: DmitryFrolovTri <23313323+DmitryFrolovTri@users.noreply.github.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix #25451.
Bugfixes:
- When stopping the zombie or endless tasks, set `LogInStorage` to true
after transferring the file to storage. It was missing, it could write
to a nonexistent file in DBFS because `LogInStorage` was false.
- Always update `ActionTask.Updated` when there's a new state reported
by the runner, even if there's no change. This is to avoid the task
being judged as a zombie task.
Enhancement:
- Support `Stat()` for DBFS file.
- `WriteLogs` refuses to write if it could result in content holes.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
More fix for #24981
* #24981
Close #22361
* #22361
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Co-authored-by: Giteabot <teabot@gitea.io>
Fix #25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
Fix #25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
Fix regression of #25174.
The `Init` of the db indexer should return true to indicate that the
index was opened/existed, or the indexer will try to populate the index
(not really populate, just fill the queue, `Index` method of the db
indexer is a dummy).
Refactor `modules/indexer` to make it more maintainable. And it can be
easier to support more features. I'm trying to solve some of issue
searching, this is a precursor to making functional changes.
Current supported engines and the index versions:
| engines | issues | code |
| - | - | - |
| db | Just a wrapper for database queries, doesn't need version | - |
| bleve | The version of index is **2** | The version of index is **6**
|
| elasticsearch | The old index has no version, will be treated as
version **0** in this PR | The version of index is **1** |
| meilisearch | The old index has no version, will be treated as version
**0** in this PR | - |
## Changes
### Split
Splited it into mutiple packages
```text
indexer
├── internal
│ ├── bleve
│ ├── db
│ ├── elasticsearch
│ └── meilisearch
├── code
│ ├── bleve
│ ├── elasticsearch
│ └── internal
└── issues
├── bleve
├── db
├── elasticsearch
├── internal
└── meilisearch
```
- `indexer/interanal`: Internal shared package for indexer.
- `indexer/interanal/[engine]`: Internal shared package for each engine
(bleve/db/elasticsearch/meilisearch).
- `indexer/code`: Implementations for code indexer.
- `indexer/code/internal`: Internal shared package for code indexer.
- `indexer/code/[engine]`: Implementation via each engine for code
indexer.
- `indexer/issues`: Implementations for issues indexer.
### Deduplication
- Combine `Init/Ping/Close` for code indexer and issues indexer.
- ~Combine `issues.indexerHolder` and `code.wrappedIndexer` to
`internal.IndexHolder`.~ Remove it, use dummy indexer instead when the
indexer is not ready.
- Duplicate two copies of creating ES clients.
- Duplicate two copies of `indexerID()`.
### Enhancement
- [x] Support index version for elasticsearch issues indexer, the old
index without version will be treated as version 0.
- [x] Fix spell of `elastic_search/ElasticSearch`, it should be
`Elasticsearch`.
- [x] Improve versioning of ES index. We don't need `Aliases`:
- Gitea does't need aliases for "Zero Downtime" because it never delete
old indexes.
- The old code of issues indexer uses the orignal name to create issue
index, so it's tricky to convert it to an alias.
- [x] Support index version for meilisearch issues indexer, the old
index without version will be treated as version 0.
- [x] Do "ping" only when `Ping` has been called, don't ping
periodically and cache the status.
- [x] Support the context parameter whenever possible.
- [x] Fix outdated example config.
- [x] Give up the requeue logic of issues indexer: When indexing fails,
call Ping to check if it was caused by the engine being unavailable, and
only requeue the task if the engine is unavailable.
- It is fragile and tricky, could cause data losing (It did happen when
I was doing some tests for this PR). And it works for ES only.
- Just always requeue the failed task, if it caused by bad data, it's a
bug of Gitea which should be fixed.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
this will allow us to fully localize it later
PS: we can not migrate back as the old value was a one-way conversion
prepare for #25213
---
*Sponsored by Kithara Software GmbH*
In modern days, there is no reason to make users set "charset" anymore.
Close #25378
## ⚠️ BREAKING
The key `[database].CHARSET` was removed completely as every newer
(>10years) MySQL database supports `utf8mb4` already.
There is a (deliberately) undocumented new fallback option if anyone
still needs to use it, but we don't recommend using it as it simply
causes problems.
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
----
Close #24818
Close #24222
Close #21606
Close #21498
Close #25107
Close #24981
Maybe close #24503
Replace #23301
Replace #22754
And maybe more
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix #25377, the "install" page needs more fine tunes.
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Follow up #22405
Fix #20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The plan is that all built-in auth providers use inline SVG for more
flexibility in styling and to get the GitHub icon to follow
`currentcolor`. This only removes the `public/img/auth` directory and
adds the missing svgs to our svg build.
It should map the built-in providers to these SVGs and render them. If
the user has set a Icon URL, it should render that as an `img` tag
instead.
```
gitea-azure-ad
gitea-bitbucket
gitea-discord
gitea-dropbox
gitea-facebook
gitea-gitea
gitea-gitlab
gitea-google
gitea-mastodon
gitea-microsoftonline
gitea-nextcloud
gitea-twitter
gitea-yandex
octicon-mark-github
```
GitHub logo is now white again on dark theme:
<img width="431" alt="Screenshot 2023-06-12 at 21 45 34"
src="https://github.com/go-gitea/gitea/assets/115237/27a43504-d60a-4132-a502-336b25883e4d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes #25160.
`data-source-position` of checkboxes in a task list was incorrect
whenever there was YAML front matter. This would result in issue content
or PR descriptions getting corrupted with random `x` or space characters
when a user checked or unchecked a task.
If redirect_to parameter has set value starting with `\\example.com`
redirect will be created with header `Location: /\\example.com` that
will redirect to example.com domain.
Fixes some issues with the swagger documentation for the new multiple
files API endpoint (#24887) which were overlooked when submitting the
original PR:
1. add some missing parameter descriptions
2. set correct `required` option for required parameters
3. change endpoint description to match it full functionality (every
kind of file modification is supported, not just creating and updating)
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes #24501
Closes #24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
Before, Gitea shows the database table stats on the `admin dashboard`
page.
It has some problems:
* `count(*)` is quite heavy. If tables have many records, this blocks
loading the admin page blocks for a long time
* Some users had even reported issues that they can't visit their admin
page because this page causes blocking or `50x error (reverse proxy
timeout)`
* The `actions` stat is not useful. The table is simply too large. Does
it really matter if it contains 1,000,000 rows or 9,999,999 rows?
* The translation `admin.dashboard.statistic_info` is difficult to
maintain.
So, this PR uses a separate page to show the stats and removes the
`actions` stat.
## ⚠️ BREAKING
The `actions` Prometheus metrics collector has been removed for the
reasons mentioned beforehand.
Please do not rely on its output anymore.
The INI package has many bugs and quirks, and in fact it is
unmaintained.
This PR is the first step for the INI package refactoring:
* Use Gitea's "config_provider" to provide INI access
* Deprecate the INI package by golangci.yml rule
It's been disabled by default since 1.17
(https://github.com/go-gitea/gitea/pull/18914), and it never really
delivered any benefit except being another cache layer that has its own
unsolved invalidation issues. HTTP cache works, we don't need two cache
layers at the browser for assets.
## ⚠️ BREAKING
You can remove the config `[ui].USE_SERVICE_WORKER` from your `app.ini`
now.
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves #14619
gitea.com experienced the corrupted LevelQueue bug again.
I think the problem is clear now: if the keys in LevelDB went
out-of-sync, the LevelQueue itself doesn't have the ability to recover,
eg:
* LevelQueue.Len() reports 100
* LevelQueue.LPop() reports ErrNotFound = errors.New("no key found")
So it needs to dive into the LevelDB to remove all keys to recover the
corrupted LevelQueue.
More comments are in TestCorruptedLevelQueue.
As discussed in
https://github.com/go-gitea/gitea/pull/24953#issuecomment-1565630156.
## ⚠️ BREAKING ⚠️
1. The `ui.THEME_COLOR_META_TAG` setting has been removed. If you still
need to set the `theme-color` meta tag, add it via
`$GITEA_CUSTOM/templates/custom/header.tmpl` instead.
2. The non-standard `default-theme` meta-tag added in
https://github.com/go-gitea/gitea/pull/13809 has been removed. Third
party code that needs to obtain the currently loaded theme should use
the `theme-<name>` class on the `<html>` node instead, which reflect the
currently active theme.
The old EventWriter's Run does:
```go
for {
handlePause()
select {
case event <- Queue:
write the log event ...
}
}
```
So, if an event writer is started before the logger is paused, there is
a chance that the logger isn't paused for the first message.
The new logic is:
```go
for {
select {
case event <- Queue:
handlePause()
write the log event ...
}
}
```
Then the event writer can be correctly paused
The old process manager's `Trace` function by default calls `log.Printf`
to output "trace" level logs. That's not ideal because by default the
trace level logs should not be outputted. In history it didn't cause
problems because there was no other call to the process manager before
the logger system's initialization.
But if there is any package using the process manager before the "Trace"
function gets assigned to the logger system's trace function, the
process manager will outputs unexpected verbose messages, this behavior
is not expected in most cases.
Now, the logger system also uses process manager to manage its goroutine
contexts, so it's the time to fix the old "trace" behavior: by default,
do not output the trace level messages. Fix #24951
Before there was a "graceful function": RunWithShutdownFns, it's mainly
for some modules which doesn't support context.
The old queue system doesn't work well with context, so the old queues
need it.
After the queue refactoring, the new queue works with context well, so,
use Golang context as much as possible, the `RunWithShutdownFns` could
be removed (replaced by RunWithCancel for context cancel mechanism), the
related code could be simplified.
This PR also fixes some legacy queue-init problems, eg:
* typo : archiver: "unable to create codes indexer queue" => "unable to
create repo-archive queue"
* no nil check for failed queues, which causes unfriendly panic
After this PR, many goroutines could have better display name:
This PR replaces all string refName as a type `git.RefName` to make the
code more maintainable.
Fix #15367
Replaces #23070
It also fixed a bug that tags are not sync because `git remote --prune
origin` will not remove local tags if remote removed.
We in fact should use `git fetch --prune --tags origin` but not `git
remote update origin` to do the sync.
Some answer from ChatGPT as ref.
> If the git fetch --prune --tags command is not working as expected,
there could be a few reasons why. Here are a few things to check:
>
>Make sure that you have the latest version of Git installed on your
system. You can check the version by running git --version in your
terminal. If you have an outdated version, try updating Git and see if
that resolves the issue.
>
>Check that your Git repository is properly configured to track the
remote repository's tags. You can check this by running git config
--get-all remote.origin.fetch and verifying that it includes
+refs/tags/*:refs/tags/*. If it does not, you can add it by running git
config --add remote.origin.fetch "+refs/tags/*:refs/tags/*".
>
>Verify that the tags you are trying to prune actually exist on the
remote repository. You can do this by running git ls-remote --tags
origin to list all the tags on the remote repository.
>
>Check if any local tags have been created that match the names of tags
on the remote repository. If so, these local tags may be preventing the
git fetch --prune --tags command from working properly. You can delete
local tags using the git tag -d command.
---------
Co-authored-by: delvh <dev.lh@web.de>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves #2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
1. non-dev mode is treated as prod mode, to protect users from
accidentally running in dev mode if there is a typo in this value.
2. in dev mode, do not need to really exit if there are template errors,
because the template errors could be fixed by developer soon and the
templates get reloaded, help:
* https://github.com/go-gitea/gitea/issues/24845#issuecomment-1557615382
3. Fine tune the mail template loading message.
close https://github.com/go-gitea/gitea/issues/16321
Provided a webhook trigger for requesting someone to review the Pull
Request.
Some modifications have been made to the returned `PullRequestPayload`
based on the GitHub webhook settings, including:
- add a description of the current reviewer object as
`RequestedReviewer` .
- setting the action to either **review_requested** or
**review_request_removed** based on the operation.
- adding the `RequestedReviewers` field to the issues_model.PullRequest.
This field will be loaded into the PullRequest through
`LoadRequestedReviewers()` when `ToAPIPullRequest` is called.
After the Pull Request is merged, I will supplement the relevant
documentation.
Fix #24896
If users set different languages by `linguist-language`, the `stats` map
could be: `java: 100, Java: 200`.
Language stats are stored as case-insensitive in database and there is a
unique key.
So, the different language names should be merged to one unique name:
`Java: 300`
Replace #19857
Close #19856
Close #10311
Close #10123
Major changes:
1. Move a lot of code from `environment-to-ini.go` to `config_env.go` to
make them testable.
2. Add `__FILE` support
3. Update documents
4. Add tests
Close #13454 , Close #23255, Close #14697 (and maybe more related
issues)
Many users have the requirement to customize the git config. This PR
introduces an easy way: put the options in Gitea's app.ini
`[git.config]`, then the config options will be applied to git config.
And it can support more flexible default config values, eg: now
`diff.algorithm=histogram` by default. According to:
https://stackoverflow.com/a/32367597/4754037 , `histogram diff` is
efficient and doesn't like to cause server-side problems.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Giteabot <teabot@gitea.io>
Fix #24882
The goroutines are all asynchronized. So it needs a little "sleep" to
make sure the writer's goroutine has been paused before sending messages
to it.
Co-authored-by: Giteabot <teabot@gitea.io>
Fix #24856
Rename "context.contextKey" to "context.WebContextKey", this context is
for web context only. But the Context itself is not renamed, otherwise
it would cause a lot of changes (if we really want to rename it, there
could be a separate PR).
The old test code doesn't really test, the "install page" gets broken
not only one time, so use new test code to make sure the "install page"
could work.
Replace #20257 (which is stale and incomplete)
Close #20255
Major changes:
* Deprecate the "WHITELIST", use "ALLOWLIST"
* Add wildcard support for EMAIL_DOMAIN_ALLOWLIST/EMAIL_DOMAIN_BLOCKLIST
* Update example config file and document
* Improve tests
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close #12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This change makes the CSS for `<video>` in markup match that of `<img>`,
and also allows additional attributes to be used. This way the width,
padding, alignment should work equally well for both.
Replace #16455
Close #21803
Mixing different Gitea contexts together causes some problems:
1. Unable to respond proper content when error occurs, eg: Web should
respond HTML while API should respond JSON
2. Unclear dependency, eg: it's unclear when Context is used in
APIContext, which fields should be initialized, which methods are
necessary.
To make things clear, this PR introduces a Base context, it only
provides basic Req/Resp/Data features.
This PR mainly moves code. There are still many legacy problems and
TODOs in code, leave unrelated changes to future PRs.
This PR
- [x] Move some functions from `issues.go` to `issue_stats.go` and
`issue_label.go`
- [x] Remove duplicated issue options `UserIssueStatsOption` to keep
only one `IssuesOptions`
Regression of #24536. If the user doesn't explicitly disable Actions, it
will be enabled.
1. Gitea will call `loadRepositoryFrom` before `loadActionsFrom`.
25d4f95df2/modules/setting/setting.go (L234-L237)
2. In `loadRepositoryFrom`,
`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` will set
`actions.ENABLED` with `true`.
25d4f95df2/modules/setting/repository.go (L313-L315)
3. In `loadActionsFrom`, `rootCfg.Section("actions")` will get a section
with Actions enabled.
25d4f95df2/modules/setting/actions.go (L23-L26)
Although the cause of the problem was using `true` by copy-paste
mistake, it also surprised me that
**`rootCfg.Section("actions").Key("ENABLED").MustBool(true)` doesn't
only read, but also write.**
Make mailer SMTP check have timed context
Otherwise Gitea may block for long time if the DNS request blocks.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This PR adds support for the systemd notify protocol. Several status
messagess are provided. We should likely add a common notify/status
message for graceful.
Replaces #21140
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: ltdk <usr@ltdk.xyz>
Co-authored-by: Giteabot <teabot@gitea.io>
minio storage iterator shows different behavior with local fs iterator.
in local fs storage:
``` go
s.IterateObjects("prefix", func(path,obj)
println(path) // show "prefix/xxx.file"
})
```
in minio storage:
```go
s.IterateObjects("prefix", func(path,obj)
println(path) // show "xxx.file"
})
```
I think local fs is correct, minio use wrong `basePath` to trim storage
path prefix.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
`http.ServeFile/ServeContent` handles `If-xxx`, `Content-Length`,
`Range` and `Etag` correctly
After this PR, storage files (eg: avatar) could be responded with
correct Content-Length.
Although some features are mixed together in this PR, this PR is not
that large, and these features are all related.
Actually there are more than 70 lines are for a toy "test queue", so
this PR is quite simple.
Major features:
1. Allow site admin to clear a queue (remove all items in a queue)
* Because there is no transaction, the "unique queue" could be corrupted
in rare cases, that's unfixable.
* eg: the item is in the "set" but not in the "list", so the item would
never be able to be pushed into the queue.
* Now site admin could simply clear the queue, then everything becomes
correct, the lost items could be re-pushed into queue by future
operations.
3. Split the "admin/monitor" to separate pages
4. Allow to download diagnosis report
* In history, there were many users reporting that Gitea queue gets
stuck, or Gitea's CPU is 100%
* With diagnosis report, maintainers could know what happens clearly
The diagnosis report sample:
[gitea-diagnosis-20230510-192913.zip](https://github.com/go-gitea/gitea/files/11441346/gitea-diagnosis-20230510-192913.zip)
, use "go tool pprof profile.dat" to view the report.
Screenshots:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Replaces #24641
Currently, unit tests fail when run locally (unless users have minio
instance running). This PR only requires redis unit tests if in CI.
- Only run redis unit tests when `CI` env variable is set
- Add minio as a service in unit tests actions
According to the discussion with DanielGibson, the default "20m" seems
too short. It would make LFS fail if the file is large / network is
slow.
I think relaxing this timeout doesn't have side affect. So change the
default value to 24h, IMO that should be long enough.
## ⚠️ BREAKING
If admins want the previous timeout, they should set the setting
`[server].LFS_HTTP_AUTH_EXPIRY`.
#### Added
- API: Create a branch directly from commit on the create branch API
- Added `old_ref_name` parameter to allow creating a new branch from a
specific commit, tag, or branch.
- Deprecated `old_branch_name` parameter in favor of the new
`old_ref_name` parameter.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
1. Remove unused fields/methods in web context.
2. Make callers call target function directly instead of the light
wrapper like "IsUserRepoReaderSpecific"
3. The "issue template" code shouldn't be put in the "modules/context"
package, so move them to the service package.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
The "modules/context.go" is too large to maintain.
This PR splits it to separate files, eg: context_request.go,
context_response.go, context_serve.go
This PR will help:
1. The future refactoring for Gitea's web context (eg: simplify the context)
2. Introduce proper "range request" support
3. Introduce context function
This PR only moves code, doesn't change any logic.
Due to #24409 , we can now specify '--not' when getting all commits from
a repo to exclude commits from a different branch.
When I wrote that PR, I forgot to also update the code that counts the
number of commits in the repo. So now, if the --not option is used, it
may return too many commits, which can indicate that another page of
data is available when it is not.
This PR passes --not to the commands that count the number of commits in
a repo
Help some users like #16832#1851
There are many users reporting similar problem: if the SECRET_KEY
mismatches, some operations (like 2FA login) only reports unclear 500
error and unclear "base64 decode error" log （some maintainers ever spent
a lot of time on debugging such problem)
The SECRET_KEY was not well-designed and it is also a kind of technical
debt. Since it couldn't be fixed easily, it's good to add clearer error
messages, then at least users could know what the real problem is.
---------
Co-authored-by: delvh <dev.lh@web.de>
This gives more "freshness" to the explore page. So it's not just the
same X users on the explore page by default, now it matches the same
sort as the repos on the explore page.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Replace #22117. Implement it in a more maintainable way.
Some licenses have placeholders e.g. the BSD licenses start with this
line:
```
Copyright (c) <year> <owner>.
```
This PR replaces the placeholders with the correct value when initialize
a new repo.
### FAQ
- Why not use a regex?
It will be a pretty complicated regex which could be hard to maintain.
- There're still missing placeholders.
There are over 500 licenses, it's impossible for anyone to inspect all
of them alone. Please help to add them if you find any, and it is also
OK to leave them for the future.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
close #24449
The unit of `Actions` should be contorlled not only by
`repository.DISABLED_REPO_UNITS` but also by `actions.ENABLED`
in the `app.ini`.
Previously, the permission of the team's `Actions` unit was not
controlled by `actions.Enabled`. So, even if the user sets
`actions.Enabled` to false, he can still select the permission of the
`Actions` unit for the team.
This PR makes the permissions of the team's `Actions` unit also
controlled by `actions.Enabled`. Just append`TypeActions` into
`DisabledRepoUnits` slice when initializing if `actions.Enabled` is
false.
### Changes:
If `Actions` is set disbaled in `app.ini`, like below:
```yaml
[actions]
ENABLED = false
```
1. If user try to create/edit a team, will prompt user that `Actions` is disabled.
2. `actions` is not displayed in the sidebar on the team details page
Partially for #24457
Major changes:
1. The old `signedUserNameStringPointerKey` is quite hacky, use
`ctx.Data[SignedUser]` instead
2. Move duplicate code from `Contexter` to `CommonTemplateContextData`
3. Remove incorrect copying&pasting code `ctx.Data["Err_Password"] =
true` in API handlers
4. Use one unique `RenderPanicErrorPage` for panic error page rendering
5. Move `stripSlashesMiddleware` to be the first middleware
6. Install global panic recovery handler, it works for both `install`
and `web`
7. Make `500.tmpl` only depend minimal template functions/variables,
avoid triggering new panics
Screenshot:
<details>
</details>
The ordering of the final token causing a close of the queue in this
test may be out of sync due to concurrency. Instead just use ensure that
the queue is closed when everything expected is done.
Fixes: https://github.com/go-gitea/gitea/issues/23608
Fixes: https://github.com/go-gitea/gitea/issues/23977
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
The old `HTMLRender` is not ideal.
1. It shouldn't be initialized multiple times, it consumes a lot of
memory and is slow.
2. It shouldn't depend on short-lived requests, the `WatchLocalChanges`
needs a long-running context.
3. It doesn't make sense to use FuncsMap slice.
HTMLRender was designed to only work for GItea's specialized 400+
templates, so it's good to make it a global shared instance.
For my specific use case, I'd like to get all commits that are on one
branch but NOT on the other branch.
For instance, I'd like to get all the commits on `Branch1` that are not
also on `master` (I.e. all commits that were made after `Branch1` was
created).
This PR adds a `not` query param that gets passed down to the `git log`
command to allow the user to exclude items from `GetAllCommits`.
See [git
documentation](https://git-scm.com/docs/git-log#Documentation/git-log.txt---not)
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
There was only one `IsRepositoryExist` function, it did: `has && isDir`
However it's not right, and it would cause 500 error when creating a new
repository if the dir exists.
Then, it was changed to `has || isDir`, it is still incorrect, it
affects the "adopt repo" logic.
To make the logic clear:
* IsRepositoryModelOrDirExist
* IsRepositoryModelExist
> The scoped token PR just checked all API routes but in fact, some web
routes like `LFS`, git `HTTP`, container, and attachments supports basic
auth. This PR added scoped token check for them.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
## Needs and benefits
[Livebook](https://livebook.dev/) notebooks are used for code
documentation and for deep dives and note-taking in the elixir
ecosystem. Rendering these in these as Markdown on frogejo has many
benefits, since livemd is a subset of markdown. Some of the benefits
are:
- New users of elixir and livebook are scared by unformated .livemd
files, but are shown what they expect
- Sharing a notebook is as easy as sharing a link, no need to install
the software in order to see the results.
[goldmark-meraid ](https://github.com/abhinav/goldmark-mermaid) is a
mermaid-js parser already included in gitea. This makes the .livemd
rendering integration feature complete. With this PR class diagrams, ER
Diagrams, flow charts and much more will be rendered perfectly.
With the additional functionality gitea will be an ideal tool for
sharing resources with fellow software engineers working in the elixir
ecosystem. Allowing the git forge to be used without needing to install
any software.
## Feature Description
This issue requests the .livemd extension to be added as a Markdown
language extension.
- `.livemd` is the extension of Livebook which is an Elixir version of
Jupyter Notebook.
- `.livemd` is` a subset of Markdown.
This would require the .livemd to be recognized as a markdown file. The
Goldmark the markdown parser should handle the parsing and rendering
automatically.
Here is the corresponding commit for GitHub linguist:
https://github.com/github/linguist/pull/5672
Here is a sample page of a livemd file:
https://github.com/github/linguist/blob/master/samples/Markdown/livebook.livemd
## Screenshots
The first screenshot shows how github shows the sample .livemd in the
browser.
The second screenshot shows how mermaid js, renders my development
notebook and its corresponding ER Diagram. The source code can be found
here:
79615f7428/termiNotes.livemd
## Testing
I just changed the file extension from `.livemd`to `.md`and the document
already renders perfectly on codeberg. Check you can it out
[here](https://codeberg.org/lgh/Termi/src/branch/livemd2md/termiNotes.md)
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
After #24317 this function is only used in one place where it is not
needed. I confirmed the timestamp still renders correctly
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
This adds a API for getting License templates. This tries to be as close
to the [GitHub
API](https://docs.github.com/en/rest/licenses?apiVersion=2022-11-28) as
possible, but Gitea does not support all features that GitHub has. I
think they should been added, but this out f the scope of this PR. You
should merge #23006 before this PR for security reasons.
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:
- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense
I don't plan on investigating the individual issues any further.
<details>
<summary>Initial Lint Results</summary>
```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("TempDir %s\n", tmpDir)
^
contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)
^
contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Navigate to %s to open PR\n", url)
^
contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `xdg-open %s`\n", url)
^
contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)
^
contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)
^
contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("* Attempting git cherry-pick --continue")
^
contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Attempting git cherry-pick %s\n", sha)
^
contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s\n", currentBranch)
^
contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)
^
contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)
^
contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)
^
contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s main`\n", remote)
^
contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)
^
contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Unsupported RDBMS for integration tests")
^
models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("LoadFixtures failed after retries: %v\n", err)
^
models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to generate sequence update: %v\n", err)
^
models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)
^
models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Environment variable $GITEA_ROOT not set")
^
models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)
^
models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)
^
models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to create temporary data path %v\n", err)
^
models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to InitFull: %v\n", err)
^
models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error: %v", err)
^
contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("CreateTestEngine: %+v", err)
^
contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("PrepareTestDatabase: %+v\n", err)
^
contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", r, err)
^
contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", g.name, err)
^
contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s created.\n", path)
^
services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
print Printer
^
modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())
^
tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf(format+"\n", args...)
^
tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
^
cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("%s\n", respText)
^
cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s's password has been successfully updated!\n", user.Name)
^
cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generated random password is '%s'\n", password)
^
cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created... %s\n", t.Token)
^
cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("New user '%s' has been successfully created!\n", username)
^
cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s\n", t.Token)
^
cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created: %s\n", t.Token)
^
cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)
^
cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")
^
cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")
^
cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("This command can only be used with a MySQL or MSSQL database")
^
cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")
^
cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(a.path)
^
cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Using app.ini at", setting.CustomConf)
^
cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Extracting to %s:\n", destdir)
^
cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s already exists; skipped.\n", dest)
^
cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(dest)
^
cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", internalToken)
^
cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", JWTSecretBase64)
^
cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", secretKey)
^
cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(strings.TrimSpace(authorizedString))
^
cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("warning: Content is empty")
^
cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("Proceed with sending email? [Y/n] ")
^
cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("The mail was not sent")
^
cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)
^
cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Gitea: SSH has been disabled")
^
cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("error showing subcommand help: %v\n", err)
^
cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")
^
cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("If this is unexpected, please log in with password and setup Gitea under another user.")
^
cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print(`{"type":"gitea","version":1}`)
^
tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stderr.String())
^
tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", resp.Body)
^
```
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
This refactors the `shared/datetime/short|long|full` templates into a
template helper function, which allows us to render absolute date times
within translatable phrases.
- Follows #23988
- The first attempt was in #24055
- This should help #22664
Changes:
1. Added the `DateTime` template helper that replaces the
`shared/datetime/short|long|full` templates
2. Used find-and-replace with varying regexes to replace the templates
from step 1 (for example, `\{\{template "shared/datetime/(\S+) \(dict
"Datetime" ([^"]+) "Fallback" ([^\)]+\)?) ?\)?\}\}` -> `{{DateTime "$1
$2 $3}}`)
3. Used the new `DateTime` helper in the issue due date timestamp
rendering
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The `SHOW_FOOTER_BRANDING` came from year 2015, and it seems nobody ever
uses it. It only shows an GitHub icon which seems unrelated to Gitea, it
doesn't do what document says. So, remove it.
## ⚠️ Breaking
Users can now remove the key `[other].SHOW_FOOTER_BRANDING` from their
app.ini.
- Update all tool dependencies to latest tag
- Remove unused errcheck, it is part of golangci-lint
- Include main.go in air
- Enable wastedassign again now that it's
[generics-compatible](https://github.com/golangci/golangci-lint/pull/3689)
- Restructured lint targets to new `lint-*` namespace
Follow #23328
The improvements:
1. The `contains` functions are covered by tests
2. The inconsistent behavior of `containGeneric` is replaced by
`StringUtils.Contains` and `SliceUtils.Contains`
3. In the future we can move more help functions into XxxUtils to
simplify the `helper.go` and reduce unnecessary global functions.
FAQ:
1. Why it's called `StringUtils.Contains` but not `strings.Contains`
like Golang?
Because our `StringUtils` is not Golang's `strings` package. There will
be our own string functions.
---------
Co-authored-by: silverwind <me@silverwind.io>
Before, there was a `log/buffer.go`, but that design is not general, and
it introduces a lot of irrelevant `Content() (string, error) ` and
`return "", fmt.Errorf("not supported")` .
And the old `log/buffer.go` is difficult to use, developers have to
write a lot of `Contains` and `Sleep` code.
The new `LogChecker` is designed to be a general approach to help to
assert some messages appearing or not appearing in logs.
Users can now upload `webp` images.
Browsers supporting webp images then display this as the avatar of this
user (every major browser except IE).
---------
Co-authored-by: silverwind <me@silverwind.io>
The old code is unnecessarily complex, and has many misuses.
Old code "wraps" a lot, wrap wrap wrap, it's difficult to understand
which kind of handler is used.
The new code uses a general approach, we do not need to write all kinds
of handlers into the "wrapper", do not need to wrap them again and
again.
New code, there are only 2 concepts:
1. HandlerProvider: `func (h any) (handlerProvider func (next)
http.Handler)`, it can be used as middleware
2. Use HandlerProvider to get the final HandlerFunc, and use it for
`r.Get()`
And we can decouple the route package from context package (see the
TODO).
# FAQ
## Is `reflect` safe?
Yes, all handlers are checked during startup, see the `preCheckHandler`
comment. If any handler is wrong, developers could know it in the first
time.
## Does `reflect` affect performance?
No. https://github.com/go-gitea/gitea/pull/24080#discussion_r1164825901
1. This reflect code only runs for each web handler call, handler is far
more slower: 10ms-50ms
2. The reflect is pretty fast (comparing to other code): 0.000265ms
3. XORM has more reflect operations already
# Background
Golang template is not friendly for large projects, and Golang template
team is quite slow, related:
* `https://github.com/golang/go/issues/54450`
Without upstream support, we can also have our solution to make HTML
template functions support context.
It helps a lot, the above Golang template issue `#54450` explains a lot:
1. It makes `{{Locale.Tr}}` could be used in any template, without
passing unclear `(dict "root" . )` anymore.
2. More and more functions need `context`, like `avatar`, etc, we do not
need to do `(dict "Context" $.Context)` anymore.
3. Many request-related functions could be shared by parent&children
templates, like "user setting" / "system setting"
See the test `TestScopedTemplateSetFuncMap`, one template set, two
`Execute` calls with different `CtxFunc`.
# The Solution
Instead of waiting for upstream, this PR re-uses the escaped HTML
template trees, use `AddParseTree` to add related templates/trees to a
new template instance, then the new template instance can have its own
FuncMap , the function calls in the template trees will always use the
new template's FuncMap.
`template.New` / `template.AddParseTree` / `adding-FuncMap` are all
quite fast, so the performance is not affected.
The details:
1. Make a new `html/template/Template` for `all` templates
2. Add template code to the `all` template
3. Freeze the `all` template, reset its exec func map, it shouldn't
execute any template.
4. When a router wants to render a template by its `name`
1. Find the `name` in `all`
2. Find all its related sub templates
3. Escape all related templates (just like what the html template
package does)
4. Add the escaped parse-trees of related templates into a new (scoped)
`text/template/Template`
5. Add context-related func map into the new (scoped) text template
6. Execute the new (scoped) text template
7. To improve performance, the escaped templates are cached to `template
sets`
# FAQ
## There is a `unsafe` call, is this PR unsafe?
This PR is safe. Golang has strict language definition, it's safe to do
so: https://pkg.go.dev/unsafe#Pointer (1) Conversion of a *T1 to Pointer
to *T2
## What if Golang template supports such feature in the future?
The public structs/interfaces/functions introduced by this PR is quite
simple, the code of `HTMLRender` is not changed too much. It's very easy
to switch to the official mechanism if there would be one.
## Does this PR change the template execution behavior?
No, see the tests (welcome to design more tests if it's necessary)
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Close #7570
1. Clearly define the wiki path behaviors, see
`services/wiki/wiki_path.go` and tests
2. Keep compatibility with old contents
3. Allow to use dashes in titles, eg: "2000-01-02 Meeting record"
4. Add a "Pages" link in the dropdown, otherwise users can't go to the
Pages page easily.
5. Add a "View original git file" link in the Pages list, even if some
file names are broken, users still have a chance to edit or remove it,
without cloning the wiki repo to local.
6. Fix 500 error when the name contains prefix spaces.
This PR also introduces the ability to support sub-directories, but it
can't be done at the moment due to there are a lot of legacy wiki data,
which use "%2F" in file names.
Co-authored-by: Giteabot <teabot@gitea.io>
The old code has a lot of technical debts, eg: `repo/wiki/view.tmpl` /
`Iterate`
This PR improves the Wiki TOC display and improves the code.
---------
Co-authored-by: delvh <dev.lh@web.de>
Close #24062
At the beginning, I just wanted to fix the warning mentioned by #24062
But, the cookie code really doesn't look good to me, so clean up them.
Complete the TODO on `SetCookie`:
> TODO: Copied from gitea.com/macaron/macaron and should be improved
after macaron removed.
The default access log format has been unnecessarily escaped, leading to
spurious backslashes appearing in log lines.
Additionally, the `RemoteAddr` field includes the port, which breaks
most log parsers attempting to process it. I've added a call to
`net.SplitHostPort()` attempting to isolate the address alone, with a
fallback to the original address if it errs.
Signed-off-by: Gary Moon <gary@garymoon.net>
The idea is to use a Layered Asset File-system (modules/assetfs/layered.go)
For example: when there are 2 layers: "custom", "builtin", when access
to asset "my/page.tmpl", the Layered Asset File-system will first try to
use "custom" assets, if not found, then use "builtin" assets.
This approach will hugely simplify a lot of code, make them testable.
Other changes:
* Simplify the AssetsHandlerFunc code
* Simplify the `gitea embedded` sub-command code
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Without this patch, the setting SSH.StartBuiltinServer decides whether
the native (Go) implementation is used rather than calling 'ssh-keygen'.
It's possible for 'using ssh-keygen' and 'using the built-in server' to
be independent.
In fact, the gitea rootless container doesn't ship ssh-keygen and can be
configured to use the host's SSH server - which will cause the public
key parsing mechanism to break.
This commit changes the decision to be based on SSH.KeygenPath instead.
Any existing configurations with a custom KeygenPath set will continue
to function. The new default value of '' selects the native version. The
downside of this approach is that anyone who has relying on plain
'ssh-keygen' to have special properties will now be using the native
version instead.
I assume the exec-variant is only there because /x/crypto/ssh didn't
support ssh-ed25519 until 2016. I don't see any other reason for using
it so it might be an acceptable risk.
Fixes #23363
EDIT: this message was garbled when I tried to get the commit
description back in.. Trying to reconstruct it:
## ⚠️ BREAKING ⚠️ Users who don't have SSH.KeygenPath
explicitly set and rely on the ssh-keygen binary need to set
SSH.KeygenPath to 'ssh-keygen' in order to be able to continue using it
for public key parsing.
There was something else but I can't remember at the moment.
EDIT2: It was about `make test` and `make lint`. Can't get them to run.
To reproduce the issue, I installed `golang` in `docker.io/node:16` and
got:
```
...
go: mvdan.cc/xurls/v2@v2.4.0: unknown revision mvdan.cc/xurls/v2.4.0
go: gotest.tools/v3@v3.4.0: unknown revision gotest.tools/v3.4.0
...
go: gotest.tools/v3@v3.0.3: unknown revision gotest.tools/v3.0.3
...
go: error loading module requirements
```
Signed-off-by: Leon M. Busch-George <leon@georgemail.eu>
Close #24002
Two problems before:
1. The `log.Fatal` is missing after these `wrapFatal` calls, so the
error is not shown to users.
2. `GetTemplateAssetNames` has different behaviors for local files and
builtin assets, for builtin assets, it also returns directories, so we
need to check the extension again.
I have tested with `TAGS="bindata sqlite sqlite_unlock_notify" make
build && ./gitea` , it works well now. Before, the server responds
internal server error (because it doesn't complete the template parsing)
None of the features of `unrolled/render` package is used.
The Golang builtin "html/template" just works well. Then we can improve
our HTML render to resolve the "$.root.locale.Tr" problem as much as
possible.
Next step: we can have a template render pool (by Clone), then we can
inject global functions with dynamic context to every `Execute` calls.
Then we can use `{{Locale.Tr ....}}` directly in all templates , no need
to pass the `$.root.locale` again and again.
One of the steps in #23328
Before there were 3 different but similar functions: dict/Dict/mergeinto
The code was just copied & pasted, no test.
This PR defines a new stable `dict` function, it covers all the 3 old
functions behaviors, only +160 -171
Future developers do not need to think about or guess the different dict
functions, just use one: `dict`
Why use `dict` but not `Dict`? Because there are far more `dict` than
`Dict` in code already ......
One of the proposals in #23328
This PR introduces a simple expression calculator
(templates/eval/eval.go), it can do basic expression calculations.
Many untested template helper functions like `Mul` `Add` can be replaced
by this new approach.
Then these `Add` / `Mul` / `percentage` / `Subtract` / `DiffStatsWidth`
could all use this `Eval`.
And it provides enhancements for Golang templates, and improves
readability.
Some examples:
----
* Before: `{{Add (Mul $glyph.Row 12) 12}}`
* After: `{{Eval $glyph.Row "*" 12 "+" 12}}`
----
* Before: `{{if lt (Add $i 1) (len $.Topics)}}`
* After: `{{if Eval $i "+" 1 "<" (len $.Topics)}}`
## FAQ
### Why not use an existing expression package?
We need a highly customized expression engine:
* do the calculation on the fly, without pre-compiling
* deal with int/int64/float64 types, to make the result could be used in
Golang template.
* make the syntax could be used in the Golang template directly
* do not introduce too much complex or strange syntax, we just need a
simple calculator.
* it needs to strictly follow Golang template's behavior, for example,
Golang template treats all non-zero values as truth, but many 3rd
packages don't do so.
### What's the benefit?
* Developers don't need to add more `Add`/`Mul`/`Sub`-like functions,
they were getting more and more.
Now, only one `Eval` is enough for all cases.
* The new code reads better than old `{{Add (Mul $glyph.Row 12) 12}}`,
the old one isn't familiar to most procedural programming developers
(eg, the Golang expression syntax).
* The `Eval` is fully covered by tests, many old `Add`/`Mul`-like
functions were never tested.
### The performance?
It doesn't use `reflect`, it doesn't need to parse or compile when used
in Golang template, the performance is as fast as native Go template.
### Is it too complex? Could it be unstable?
The expression calculator program is a common homework for computer
science students, and it's widely used as a teaching and practicing
purpose for developers. The algorithm is pretty well-known.
The behavior can be clearly defined, it is stable.
The first step of #23328
This PR cleans:
1. Dead function like `SubStr`
2. Unnecessary function like `UseHTTPS`, it should be provided by
`window.origin`
3. Duplicate function like `IsShowFullName`, there was already a
`DeafultShowFullName`
I have searched these removed functions globally, no use in code.
Remove the misbehaving function and call
Repository.GetFilesChangedBetween instead.
Fixes #23919
---
~~_TODO_ test this~~ `Repository.getFilesChanged` seems to be only used
by Gitea Actions, but a similar function already exists
**Update** I tested this change and the issue is gone.
The _graceful_ should fail less when the `.editorconfig` file isn't
properly written, e.g. boolean values from YAML or unparseable numbers
(when a number is expected). As is... information is lost as the
_warning_ (a go-multierror.Error) is ignored. If anybody knows how to
send them to the UI as warning; any help is appreciated.
Closes #20694
Signed-off-by: Yoan Blanc <yoan@dosimple.ch>
At first, we have one unified team unit permission which is called
`Team.Authorize` in DB.
But since https://github.com/go-gitea/gitea/pull/17811, we allowed
different units to have different permission.
The old code is only designed for the old version. So after #17811, if
org users have write permission of other units, but have no permission
of packages, they can also get write permission of packages.
Co-authored-by: delvh <dev.lh@web.de>
Follow #23633 and #23240
Close #23814
Now we almost have a complete test set for Gitea's LocalStore.
This PR is still a quick fix for the legacy locale system (see the
TODOs), to resolve the problems fundamentally, it needs more work in the
future.
Follow #21962
After I eat my own dogfood, I would say that
ONLY_SHOW_RELEVANT_REPOS=false is necessary for many private/enterprise
instances, because many private repositories do not have
"description/topic", users just want to search by their names.
This PR also adds `PageIsExploreRepositories` check, to make code more
strict, because the `search` template is shared for different purpose.
And during the test, I found a bug that the "Search" button didn't
respect the "relevant" parameter, so this PR fixes the bug by the way
together.
I think this PR needs to be backported.
# Why this PR comes
At first, I'd like to help users like #23636 (there are a lot)
The unclear "Internal Server Error" is quite anonying, scare users,
frustrate contributors, nobody knows what happens.
So, it's always good to provide meaningful messages to end users (of
course, do not leak sensitive information).
When I started working on the "response message to end users", I found
that the related code has a lot of technical debt. A lot of copy&paste
code, unclear fields and usages.
So I think it's good to make everything clear.
# Tech Backgrounds
Gitea has many sub-commands, some are used by admins, some are used by
SSH servers or Git Hooks. Many sub-commands use "internal API" to
communicate with Gitea web server.
Before, Gitea server always use `StatusCode + Json "err" field` to
return messages.
* The CLI sub-commands: they expect to show all error related messages
to site admin
* The Serv/Hook sub-commands (for git clients): they could only show
safe messages to end users, the error log could only be recorded by
"SSHLog" to Gitea web server.
In the old design, it assumes that:
* If the StatusCode is 500 (in some functions), then the "err" field is
error log, shouldn't be exposed to git client.
* If the StatusCode is 40x, then the "err" field could be exposed. And
some functions always read the "err" no matter what the StatusCode is.
The old code is not strict, and it's difficult to distinguish the
messages clearly and then output them correctly.
# This PR
To help to remove duplicate code and make everything clear, this PR
introduces `ResponseExtra` and `requestJSONResp`.
* `ResponseExtra` is a struct which contains "extra" information of a
internal API response, including StatusCode, UserMsg, Error
* `requestJSONResp` is a generic function which can be used for all
cases to help to simplify the calls.
* Remove all `map["err"]`, always use `private.Response{Err}` to
construct error messages.
* User messages and error messages are separated clearly, the `fail` and
`handleCliResponseExtra` will output correct messages.
* Replace all `Internal Server Error` messages with meaningful (still
safe) messages.
This PR saves more than 300 lines, while makes the git client messages
more clear.
Many gitea-serv/git-hook related essential functions are covered by
tests.
---------
Co-authored-by: delvh <dev.lh@web.de>
Closes #20955
This PR adds the possibility to disable blank Issues, when the Repo has
templates. This can be done by creating the file
`.gitea/issue_config.yaml` with the content `blank_issues_enabled` in
the Repo.
Adds API endpoints to manage issue/PR dependencies
* `GET /repos/{owner}/{repo}/issues/{index}/blocks` List issues that are
blocked by this issue
* `POST /repos/{owner}/{repo}/issues/{index}/blocks` Block the issue
given in the body by the issue in path
* `DELETE /repos/{owner}/{repo}/issues/{index}/blocks` Unblock the issue
given in the body by the issue in path
* `GET /repos/{owner}/{repo}/issues/{index}/dependencies` List an
issue's dependencies
* `POST /repos/{owner}/{repo}/issues/{index}/dependencies` Create a new
issue dependencies
* `DELETE /repos/{owner}/{repo}/issues/{index}/dependencies` Remove an
issue dependency
Closes https://github.com/go-gitea/gitea/issues/15393
Closes #22115
Co-authored-by: Andrew Thornton <art27@cantab.net>
Reference:
https://github.com/go-gitea/gitea/issues/22578#issuecomment-1444180053
Credits to @tdesveaux , thank you very much for catching the problem. If
you'd like to open a PR, feel free to replace this one.
Git reports fatal errors for ambiguous arguments:
```
fatal: ambiguous argument 'refs/a...refs/b': unknown revision or path not in the working tree.
Use '--' to separate paths from revisions, like this:
'git <command> [<revision>...] -- [<file>...]'
```
So the `--` separator is necessary in some cases.
Follow:
* #23574
* Remove all ".tooltip[data-content=...]"
Major changes:
* Remove "tooltip" class, use "[data-tooltip-content=...]" instead of
".tooltip[data-content=...]"
* Remove legacy `data-position`, it's dead code since last Fomantic
Tooltip -> Tippy Tooltip refactoring
* Rename reaction attribute from `data-content` to
`data-reaction-content`
* Add comments for some `data-content`: `{{/* used by the form */}}`
* Remove empty "ui" class
* Use "text color" for SVG icons (a few)
Remove `[repository.editor] PREVIEWABLE_FILE_MODES` setting that seemed
like it was intended to support this but did not work. Instead, whenever
viewing a file shows a preview, also have a Preview tab in the file
editor.
Add new `/markup` web and API endpoints with `comment`, `gfm`,
`markdown` and new `file` mode that uses a file path to determine the
renderer.
Remove `/markdown` web endpoint but keep the API for backwards and
GitHub compatibility.
## ⚠️ BREAKING ⚠️
The `[repository.editor] PREVIEWABLE_FILE_MODES` setting was removed.
This setting served no practical purpose and was not working correctly.
Instead a preview tab is always shown in the file editor when supported.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Close #23622
As described in the issue, disabling the LFS/Package settings will cause
errors when running `gitea dump` or `gitea doctor`. We need to check the
settings and the related operations should be skipped if the settings
are disabled.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Follow #23037
Fix [#22598
comment](https://github.com/go-gitea/gitea/issues/22958#issuecomment-1475763042)
Workflows with `pull_request` trigger event can't be triggered by
`pull_request_sync` event. This PR adds the `canGithubEventMatch`
function to check if a Github event can match any Gitea event. If the
Github event matches a Gitea event, the related workflows should be
triggered.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Since #23493 has conflicts with latest commits, this PR is my proposal
for fixing #23371
Details are in the comments
And refactor the `modules/options` module, to make it always use
"filepath" to access local files.
Benefits:
* No need to do `util.CleanPath(strings.ReplaceAll(p, "\\", "/"))),
"/")` any more (not only one before)
* The function behaviors are clearly defined
There are multiple duplicate reports of errors during template rendering
due to broken custom templates.
Unfortunately the error returned here is somewhat difficult for users to
understand and it doesn't return the context of the error.
This PR attempts to parse the error returned by the template renderer to
add in some further context including the filename of the template AND
the preceding lines within that template file.
Ref #23274
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Close #23444
Add `Repository` to npm package `Metadata` struct so the `repository` in
`package.json` can be stored and be returned in the endpoint.
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
This PR fixes the tags sort issue mentioned in #23432
The tags on dropdown shoud be sorted in descending order of time but are
not. Because when getting tags, it execeutes `git tag sort
--sort=-taggerdate`. Git supports two types of tags: lightweight and
annotated, and `git tag sort --sort=-taggerdate` dosen't work with
lightweight tags, which will not give correct result. This PR add
`GetTagNamesByRepoID ` to get tags from the database so the tags are
sorted.
Also adapt this change to the droplist when comparing branches.
Dropdown places:
<img width="369" alt="截屏2023-03-15 14 25 39"
src="https://user-images.githubusercontent.com/17645053/225224506-65a72e50-4c11-41d7-8187-a7e9c7dab2cb.png">
<img width="675" alt="截屏2023-03-15 14 25 27"
src="https://user-images.githubusercontent.com/17645053/225224526-65ce8008-340c-43f6-aa65-b6bd9e1a1bf1.png">
Currently gitea shows no commit information for files starting with a
colon.
[I set up a minimal repro repository that reproduces this error once
it's migrated on gitea](https://github.com/kbolashev/colon-test)
<img width="1209" alt="image"
src="https://user-images.githubusercontent.com/111061261/219326625-0e6d3a86-8b58-4d67-bc24-8a78963f36b9.png">
This is happening because the filenames piped to the `git log` command
are written as is, and it doesn't work when you have a colon at the
start of the filename, and you need to escape it.
You can test it locally, if you do
```
mkdir repo
git init
touch :file
git add . && git commit -m "Add file with colon"
git log -- :file
```
git log returns nothing. However, if you do `git log -- "\:file"`, it
will show the commit with the file change.
This PR escapes the starting colons in paths in the `LogNameStatusRepo`
function, making gitea return commit info about the file with the bad
filename.
<img width="1209" alt="image"
src="https://user-images.githubusercontent.com/111061261/219328299-46451246-4006-45e3-89b1-c244635ded23.png">
This error shows up only with files starting with colon, anywhere else
in filename is ok. Dashes at the beginning also seem to be working.
I don't know gitea internals well enough to know where else this error
can pop up, so I'm keeping this PR small as suggested by your
contributor guide
Creating pid file should not belong to setting package and only web
command needs that. So this PR moves pidfile creation from setting
package to web command package to keep setting package more readable.
I marked this as `break` because the PIDFile path moved. For those who
have used the pid build argument, it has to be changed.
---------
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
hardcode the version of test_env we use in docker, so that we can use
different major versions of golang between versions of Gitea
---------
Co-authored-by: Lauris BH <lauris@nix.lv>
this is a simple endpoint that adds the ability to rename users to the
admin API.
Note: this is not in a mergeable state. It would be better if this was
handled by a PATCH/POST to the /api/v1/admin/users/{username} endpoint
and the username is modified.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close #23411
Always pass "page" query parameter to backend, and make backend respect
it.
The `ctx.FormInt("limit")` is never used, so removed.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Support to iterator subdirectory in ObjectStorage for
ObjectStorage.Iterator method.
It's required for https://github.com/go-gitea/gitea/pull/22738 to make
artifact files cleanable.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR adds support for reflogs on all repositories. It does this by
adding a global configuration entry.
Implements #14865
---------
Signed-off-by: Philip Peterson <philip.c.peterson@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix scoped label left and right part breaking across lines.
* Remove slanted divider in scoped label display, make it straight.
After using this for a while, this feels more visually noisy than
helpful.
* Reduce contrast between scope and item to reduce probability of
unreadable text on background.
* Change documentation to remove mention of non-exclusive scoped labels.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/22676
Context Data `IsOrganizationMember` and `IsOrganizationOwner` is used to
control the visibility of `people` and `team` tab.
2871ea0809/templates/org/menu.tmpl (L19-L40)
And because of the reuse of user projects page, User Context is changed
to Organization Context. But the value of `IsOrganizationMember` and
`IsOrganizationOwner` are not being given.
I reused func `HandleOrgAssignment` to add them to the ctx, but may have
some unnecessary variables, idk whether it is ok.
I found there is a missing `PageIsViewProjects` at create project page.
When the base repository contains multiple branches with the same
commits as the base branch, pull requests can show a long list of
commits already in the base branch as having been added.
What this is supposed to do is exclude commits already in the base
branch. But the mechansim to do so assumed a commit only exists in a
single branch. Now use `git rev-list A B --not branchName` instead of
filtering commits afterwards.
The logic to detect if there was a force push also was wrong for
multiple branches. If the old commit existed in any branch in the base
repository it would assume there was no force push. Instead check if the
old commit is an ancestor of the new commit.
Follow #22568
* Remove unnecessary ToTrustedCmdArgs calls
* the FAQ in #22678
* Quote: When using ToTrustedCmdArgs, the code will be very complex (see
the changes for examples). Then developers and reviewers can know that
something might be unreasonable.
* The `signArg` couldn't be empty, it's either `-S{keyID}` or
`--no-gpg-sign`.
* Use `signKeyID` instead, add comment "empty for no-sign, non-empty to
sign"
* 5-line code could be extracted to a common `NewGitCommandCommit()` to
handle the `signKeyID`, but I think it's not a must, current code is
clear enough.
Related to: #22294#23186#23054
Replace: #23218
Some discussion is in the comments of #23218.
Highlights:
- Add Expiration for cache context. If a cache context has been used for
more than 10s, the cache data will be ignored, and warning logs will be
printed.
- Add `discard` field to `cacheContext`, a `cacheContext` with `discard`
true will drop all cached data and won't store any new one.
- Introduce `WithNoCacheContext`, if one wants to run long-life tasks,
but the parent context is a cache context,
`WithNoCacheContext(perentCtx)` will discard the cache data, so it will
be safe to keep the context for a long time.
- It will be fine to treat an original context as a cache context, like
`GetContextData(context.Backgraud())`, no warning logs will be printed.
Some cases about nesting:
When:
- *A*, *B* or *C* means a cache context.
- ~*A*~, ~*B*~ or ~*C*~ means a discard cache context.
- `ctx` means `context.Backgrand()`
- *A(ctx)* means a cache context with `ctx` as the parent context.
- *B(A(ctx))* means a cache context with `A(ctx)` as the parent context.
- `With` means `WithCacheContext`
- `WithNo` means `WithNoCacheContext`
So:
- `With(ctx)` -> *A(ctx)*
- `With(With(ctx))` -> *A(ctx)*, not *B(A(ctx))*
- `With(With(With(ctx)))` -> *A(ctx)*, not *C(B(A(ctx)))*
- `WithNo(ctx)` -> *ctx*, not *~A~(ctx)*
- `WithNo(With(ctx))` -> *~A~(ctx)*
- `WithNo(WithNo(With(ctx)))` -> *~A~(ctx)*, not *~B~(~A~(ctx))*
- `With(WithNo(With(ctx)))` -> *B(~A~(ctx))*
- `WithNo(With(WithNo(With(ctx))))` -> *~B~(~A~(ctx))*
- `With(WithNo(With(WithNo(With(ctx)))))` -> *C(~B~(~A~(ctx)))*
Avoid maintaining two copies of code, some functions can be used with
both `bindata` and `no bindata`.
And removed `GetRepoInitFile`, it's useless now.
`Readme`/`Gitignore`/`License`/`Labels` will clean the name and use
custom files when available.
At the Moment it is possible to read files in another Directory as
supposed using the Options functions. e.g.
`options.Gitignore("../label/Default) `. This was discovered while
working on #22783, which exposes `options.Gitignore()` through the
public API. At the moment, this is not a security problem, as this
function is only used internal, but I thought it would be a good idea to
make a PR to fix this for all types of Options files, not only
Gitignore, to make it safe for the further. This PR should be merged
before the linked PR.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Close #17108
This PR uses a trick (removing the ID3 tag) to detect the content again
to to see whether the content is text type.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The merge and update branch code was previously a little tangled and had
some very long functions. The functions were not very clear in their
reasoning and there were deficiencies in their logging and at least one
bug in the handling of LFS for update by rebase.
This PR substantially refactors this code and splits things out to into
separate functions. It also attempts to tidy up the calls by wrapping
things in "context"s. There are also attempts to improve logging when
there are errors.
Signed-off-by: Andrew Thornton <art27@cantab.net>
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: delvh <dev.lh@web.de>
Replace #23350.
Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.
To avoid mismatching between `Type` and `UseXXX`.
This refactor can fix the bug mentioned in #23350, so it should be
backported.
This branch continues the work of #23092 and attempts to rid the
codebase of any `nil` contexts when using a `RenderContext`.
Anything that renders markdown or does post processing may call
`markup.sha1CurrentPatternProcessor()`, and this runs
`git.OpenRepository()`, which needs a context. It will panic if the
context is `nil`. This branch attempts to _always_ include a context
when creating a `RenderContext` to prevent future crashes.
Co-authored-by: Kyle D <kdumontnu@gmail.com>
## TLDR
* Fix the broken page / broken image problem when click "Install"
* Close #20089
* Fix the Password Hash Algorithm display problem for #22942
* Close #23183
* Close #23184
## Details
### The broken page / broken image problem when click "Install"
(Redirect failed after install gitea #23184)
Before: when click "install", all new requests will fail, because the
server has been restarted. Users just see a broken page with broken
images, sometimes the server is not ready but the user would have been
redirect to "/user/login" page, then the users see a new broken page
(connection refused or something wrong ...)
After: only check InstallLock=true for necessary handlers, and sleep for
a while before restarting the server, then the browser has enough time
to load the "post-install" page. And there is a script to check whether
"/user/login" is ready, the user will only be redirected to the login
page when the server is ready.
### During new instance setup make 'Gitea Base URL' filled from
window.location.origin #20089
If the "app_url" input contains `localhost` (the default value from
config), use current window's location href as the `app_url` (aka
ROOT_URL)
### Fix the Password Hash Algorithm display problem for "Provide the
ability to set password hash algorithm parameters #22942"
Before: the UI shows `pbkdf2$50000$50`
<details>
</details>
After: the UI shows `pbkdf2`
<details>
</details>
### GET data: net::ERR_INVALID_URL #23183
Cause by empty `data:` in `<link rel="manifest"
href="data:{{.ManifestData}}">`
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The code for GetFilesChangedBetween uses `git diff --name-only
base..head` to get the names of files changed between base and head
however this forgets that git will escape certain values.
This PR simply switches to use `-z` which has the `NUL` character as the
separator.
Ref https://github.com/go-gitea/gitea/pull/22568#discussion_r1123138096
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Extract from #11669 and enhancement to #22585 to support exclusive
scoped labels in label templates
* Move label template functionality to label module
* Fix handling of color codes
* Add Advanced label template
As you can imagine, for the Blender development process it is rather
nice to be able to include videos in issues, pull requests, etc.
This PR allows the `<video>` HTML tag to be used in MarkDown, with the
`src`, `autoplay`, and `controls` attributes.
## Help Needed
To have this fully functional, personally I feel the following things
are still missing, and would appreciate some help from the Gitea team.
### Styling
Some CSS is needed, but I couldn't figure out which of the LESS files
would work. I tried `web_src/less/markup/content.less` and
`web_src/less/_base.less`, but after running `make` the changes weren't
seen in the frontend.
This I would consider a minimal set of CSS rules to be applied:
```css
video {
max-width: 100%;
max-height: 100vh;
}
```
### Default Attributes
It would be fantastic if Gitea could add some default attributes to the
`<video>` tag. Basically `controls` should always be there, as there is
no point in disallowing scrolling through videos, looping them, etc.
### Integration with the attachments system
Another thing that could be added, but probably should be done in a
separate PR, is the integration with the attachments system. Dragging in
a video should attach it, then generate the appropriate MarkDown/HTML.
There have been a number of reports of PRs being blocked whilst being
checked which have been difficult to debug. In investigating #23050 I
have realised that whilst the Warn there is somewhat of a miscall there
was a real bug in the way that the LevelUniqueQueue was being restored
on start-up of the PersistableChannelUniqueQueue.
Next there is a conflict in the setting of the internal leveldb queue
name - This wasn't being set so it was being overridden by other unique
queues.
This PR fixes these bugs and adds a testcase.
Thanks to @brechtvl for noticing the second issue.
Fix #23050
and others
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
