Since drone plugin
https://github.com/meltwater/drone-convert-pathschanged/ enabled, we can
filter event with path in drone.
Building docs will now only be triggered when documentations changed.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
- Update all JS dependencies
- Add new eslint rules
- Rebuild SVGs
- Tested citation and build
SVG changes are because of https://github.com/primer/octicons/pull/883.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
closes #13585
fixes #9067
fixes #2386
ref #6226
ref #6219
fixes #745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Don't rely on obscure docker images like `plugins/hugo`
- Lock down `hugo` to same version the image had used
- Remove unnecessary verbosity in `trans-copy`
- Rename `trans-copy` to `trans-copy.sh`
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: John Olheiser <john+github@jolheiser.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
updating libcurl fixes the mismatch between curl and libcurl
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
- Update all JS dependencies to latest version
- Enable unicorn/prefer-node-protocol and autofix issues
- Regenerate SVGs
- Add some comments to eslint rules
- Tested build, Mermaid and Katex rendering
I don't know how to test this so I'll explain my thought process:
After a discussion with @techknowlogick in
cda2c38f4a
I saw the CI config has this block:
cda2c38f4a/.drone.yml (L618-L630)
I don't know much about Drone but after looking at
[appleboy/drone-git-push](https://github.com/appleboy/drone-git-push)'s
source code, I think each setting becomes an environment variable (e.g.
`remote` to `PLUGIN_REMOTE`, `commit_message` to `PLUGIN_COMMIT_MESSAGE`
etc...). Take a look at the code block loading the author info:
a69878c006/main.go (L32-L42)
Two environment variables are listed for each setting. This PR forces
both to have the same value.
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Running it as part of the build is really unnecessary because we have a
valid output file in the repo and assuming go dependencies do not change
unless go.mod also changes, tidy really is the best target to run the
license generation after.
Also, regenerate the file as I missed to do so during the chroma update,
and mark all json files in assets as generated.
- Update all JS dependencies and playwright image
- Add new eslint rules, enable a few more, fix issues
- Regenerate SVGs
- Tested Vue and Swagger
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
We can not have the `frontend` target depend on golang because of they
way drone is set up. Move the `go-licenses` generation back into `tidy`
where it will now also be checked for consistency during `tidy-check`.
(I assume all `main` branch builds should currently fail [like
this](https://drone.gitea.io/go-gitea/gitea/60244/1/11)).
The reasony why it shouldn't be treated the same as for example `go
generate` is because output files are checked in. tidy is imho the
optimal target to run this after.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This removes the JS dependency in the checks pipeline. JSON output is
different because the previous JS did indent the license data
differently and a JSON key was changed, but the end result is the same
as it gets re-indented by wepack.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
`make go-licenses` will generate `assets/go-licenses.json` which is then included in the webpack build.
This step depends on both go and node being present, so unfortunately, I could not automate the generation by hooking it up to `tidy` as that target is triggered on CI where we do not have a docker image with both go an node.
It should be ran from time to time, ideally after each go mod update.
Downgrade release pipeline to node 16 until xgo updates its base OS to a
version with a compatible glibc.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Use Golang 1.18 (as minimal requirement) for Gitea 1.17 release, make sure the Golang version is still actively supported during Gitea 1.17 lifecycle.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Our drone by necessity runs on git repositories not owned by the drone process. Unfortunately this means that git operations and thence CI builds will fail without the `safe.directory` option being set.
See: https://drone.gitea.io/go-gitea/gitea/54632/2/8
* use go1.18 to build gitea& update min go version to 1.17
* bump in a few more places
* add a few simple tests for isipprivate
* update go.mod
* update URL to https://go.dev/dl/
* golangci-lint
* attempt golangci-lint workaround
* change version
* bump fumpt version
* skip strings.title test
* go mod tidy
* update tests as some aren't private??
* update tests
This ensures the tools only run in the versions we've tested and it also
does not polute PATH with those tools so they are truly isolated. This
syntax of `go run` requires go 1.17, so the minimum version is set
accordingly.
Fixes: https://github.com/go-gitea/gitea/issues/18867
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The CI currently downloads all go modules in each pipeline step because
go modules reside outside the project directory. Fix this by introducing
a volume for the `/go` directory [1] so modules are only downloaded once per
pipeline using a new `deps-backend` make target.
For completeness, I also included new `deps` and `deps-frontend` targets
and the frontend one is also triggered explicitly on CI where needed.
[1] https://docs.drone.io/pipeline/kubernetes/examples/language/golang/#dependencies
* Fix pushing to 1-x-dev docker tag
It appears that #18551 and #18573 have a mistake in that raymond does not have
an {{else}} on {{#equal}}. This PR notes that Sprig has a hasPrefix function
and so we use this with another if.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix pushing to 1-x-dev docker tag (part 2)
Although we now have the manifest working, we need to create the images.
Here we adjust the .drone.yml to force building of the images
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix pushing to 1-x-dev docker tag
OK now we have the images building we should make sure that the main ones stays
dev and the release/v* ones become *-dev-*
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* Make docker gitea/gitea:v1.16-dev etc refer to the latest build on that branch
One of the problems with our current docker tagging is that although we
have strict version tags, latest and dev we do not have a way for docker
users to track the current release branch. This PR simply suggests that
we use the 1.x-dev tag for these and we build and push these. This will
give users who want or need unreleased bug fixes the option of tracking
the pre-release version instead of simply jumping to dev.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR should resolve the permission problems during CI, if the uid doesn't match, a more clear message is shown.
* CI fails with unknown permission problems #17710
The new drone step dependencies:
(root)prepare-test-env -> (gitea)build -> (gitea)test
- this fixes the CI release upload issues, as the docker image for this is freshly built (unlike the mostly unmaintained "official" drone plugins), thus containing current CA certs needed for letsencrypt since 2021-09-31.
- woodpecker is a drone-ci fork maintained partially by @6543. it's API compatible with current drone plugins afaik
