* Apache `ProxyPassReverse` only works for Location, Content-Location and URI headers on HTTP redirect responses, it causes more problems than it resolves. Now all URLs generated by Gitee have the correct prefix AppSubURL. We do not need to set `ProxyPassReverse`.
* fix url param
* use AppSubURL instead of AppURL in api/v1
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Allow LDAP Sources to provide Avatars
Add setting to LDAP source to allow it to provide an Avatar.
Currently this is required to point to the image bytes.
Fix #4144
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rename as Avatar Attribute (drop JPEG)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always synchronize avatar if there is change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Actually get the avatar from the ldap
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean-up
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use len()>0 rather than != ""
Signed-off-by: Andrew Thornton <art27@cantab.net>
* slight shortcut in IsUploadAvatarChanged
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Following the merging of #14959 - Gitea is a lot more strict regarding the interpretation of `X-Real-IP` and `X-Forwarded-For` headers.
This PR updates the fail2ban documentation to include hints to set: `REVERSE_PROXY_TRUSTED_PROXIES` and `REVERSE_PROXY_LIMIT` appropriately.
See discussion in #16443
Co-authored-by: zeripath <art27@cantab.net>
Following the merge of #16278 we need to update the fail2ban
documentation to take account of the availability of the new
sshConnectionFailed failed authentication attempt log message.
Also add a deprecation notice regarding the previous publicKeyHandler
messages, as these may be a source of false positives.
Signed-off-by: Andrew Thornton <art27@cantab.net>
One of the repeatedly reported issues has been that gitea produces too much console
logging during set up even if the console logger is turned off.
Fundamentally this is due to some otherwise very helpful logging that has to occur
before logging is set up. This has come to a head with the merging of #16243 where
otherwise potentially helpful Trace logging in the git module now appears on the
console.
This PR proposes three things:
1. Change the initial default logger to Info not Trace.
2. Change the logging for the AppPath things to Info in recompense.
3. Add two new command line options to gitea web: --quiet and --verbose
`gitea web -q` or `gitea web --quiet` will only log Fatal level initially.
`gitea web -verbose` will log at Trace.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Exclude the current dump file from the dump
Always prevent the current file from being added to the dump.
Fix #13618
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add skip custom directory option
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* fix label of --id in admin delete user
This pr fixes the label descriptor of `gitea admin delete user`
but also adds a `--username` option.
Fix #13995
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix-spacing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add delete email support
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Continuing on from #13953 continue to improve and standardise
logging from internal SSH.
Also updates the fail2ban setup
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Log IP on SSH authentication failure
fixes https://github.com/go-gitea/gitea/issues/13094
* include string 'Failed authentication attempt' in error
* update fail2ban docs
also match failed authentication over command line
* better logging of authentication errors with IP addresses
* format ...
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
* Fix --port setting
Unfortunately there was an error in #13195 which set the --port
option before the settings were read. This PR fixes this by
moving applying this option to after the the settings are read
However, on looking further into this code I believe that the setPort
code was slightly odd.
Firstly, it may make sense to run the install page on a different
temporary port to the full system and this should be possible with
a --install-port option.
Secondy, if the --port option is provided we should apply it to both
otherwise there will be unusual behaviour on graceful restart
Thirdly, the documentation for --port says that the setting is
temporary - it should therefore not save its result to the configuration
(This however, does mean that authorized_keys and internal links may
not be correct. - I think we need to discuss this option further.)
Fix #13277
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update cmd/web.go
* Apply suggestions from code review
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix images in wiki edit preview (#11546)
Make sure wiki editor sets wiki to true so gitea renders it as a wiki page.
Also change the context data attr for edit form. This looks wrong but everywhere else in our code assumes the urlPrefix to be just the repo url when rendering and manually adds /wiki to the rendered url regardless.
Fixes #11540
* Clarification on the use of certificate chains
* As per @bagasme
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Provides new command: `gitea doctor recreate-table` which will recreate
db tables and copy the old data in to the new table.
This function can be used to remove the old warning of struct defaults being
out of date.
Fix #8868
Fix #3265
Fix #8894
Signed-off-by: Andrew Thornton <art27@cantab.net>
#12391 offered to change the default PID file from /var/run/gitea.pid however in discussion it was decided that this could break users of older systems. An alternative was offered that we could make the PID file compile/link time settable.
This PR does this, and changes the name of the setting from CustomPID to simply PIDFile. It also updates the from-source docs to show how to change the compiler settings to do this.
Closes #12391
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Florian Klink <flokli@flokli.de>
* Make LogDescriptions race safe
* Add manager commands for pausing, resuming, adding and removing loggers
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Placate lint
* Ensure that file logger is run!
* Add support for smtp and conn
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add release-and-reopen
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add warning to mailer documentation about authentication
References #7966
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @guillep2k and @mrsdizzie
* as per @mrsdizzie
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add IIS Reverse Proxy documentation
@mahdiit in #10748 described how to set up IIS as a reverse proxy. This
PR adds these to our documentation.
Close #10748
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update docs/content/doc/usage/reverse-proxies.en-us.md
Co-Authored-By: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Updated email setup documentation to include sendmail option
* Update docs/content/doc/usage/email-setup.en-us.md
full path to sendmail
Co-Authored-By: mrsdizzie <info@mrsdizzie.com>
* Update docs/content/doc/usage/email-setup.en-us.md
docker image does not have sendmail
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
* Update docs/content/doc/usage/email-setup.en-us.md
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
* Update docs/content/doc/usage/email-setup.en-us.md
Co-Authored-By: James Lakin <jamesorlakin@users.noreply.github.com>
* Update docs/content/doc/usage/email-setup.en-us.md
Co-Authored-By: James Lakin <jamesorlakin@users.noreply.github.com>
Co-authored-by: 8ctopus <hello@octopuslabs.io>
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: James Lakin <jamesorlakin@users.noreply.github.com>
* add doctor
* Add a new command doctor to check if some wrong configurations on gitea instance
* fix import
* use regex match authorized_keys on doctor
* Add documentation
* Add support for local vs. remote xrefs
* Add doc for references
* Docs: fix cases not currently supported
* One more doc fix
* Doc: mentions for teams and orgs
* Change !num ref concept, no change in functionality
* Fix test
* Improve table of issue reference types
* Fix paragraph mark
* static url
* add cors support for static resources
* [assets] work on the migration to configurable url for assets
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [misc] fix whitespace
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] fix the loading of the manifest.json
It is generated dynamically, and as such can not be served by the cdn.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Revert "add cors support for static resources"
This reverts commit 42f964fd18
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] add the STATIC_URL_PREFIX option
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] reverse-proxy: nginx: add two setups for STATIC_URL_PREFIX
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] migrate the url of a new asset to the static url prefix
REF: f2a3abc683
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Doc recommend to use reverse proxy if Apache/nginx is also running on server
* Update docs/content/doc/usage/https-support.md
Co-Authored-By: John Olheiser <42128690+jolheiser@users.noreply.github.com>
* Added admin cmd ref to backup-restore guide
* Clarified reason for command execution
* Include directive for where command should be executed from
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Be direct in consequences
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
When using wiki page names that include a slash
behind a Apache HTTPD reverse proxy,
AllowEncodedSlashes NoDecode
and appending nocanon to the ProxyPass
directive is required. This commit adds that
information to the documentation.
Signed-off-by: Gary Kim <gary@garykim.dev>
* add CLI commands to manage LDAP authentication source
* delete Gogs copyright
* remove unused return value of func parseLoginSource
* fix comment
Co-Authored-By: ngourdon <31291059+ngourdon@users.noreply.github.com>
* remove config flag already present in global flags
* remove config flag from ldap commands in docs
* remove config flag handling
- Fixed a code block inverting the code blocks of the rest of the page
- Fixed various markdown syntax errors
- Fixed some spelling I could notice
Signed-off-by: 0x5c <0x5c.dev@gmail.com>
* Add username flag in create-user command
* Fix the error message
* Change name to username on flag of create-user command
* Include create-user flags of both versions
* delete deprecated example of create-user command
When running the dump command, include the specific configuration file
provided as part of the backup. Currently we only zip up custom/ and this
misses the config file if it is somewhere else, like /etc/gitea/app.ini
Fixes #6034
[https-setup]
- Made it clearer that HTTP redirection is possible
[config-cheat-sheet]
- Clarified the behavihour of the redirection-related config keys
* prevent pull request to be merged when PR is a WIP
* add tests
* add helper to prepend WIP: in PR title
* move default wip prefixes into settings
* use configurable WIP prefixes in javascript and default to first one in templates
* add documentation
* add unit test on pull model
Signed-off-by: Julien Tant <julien@craftyx.fr>
