This PR refactors and improves the password hashing code within gitea
and makes it possible for server administrators to set the password
hashing parameters
In addition it takes the opportunity to adjust the settings for `pbkdf2`
in order to make the hashing a little stronger.
The majority of this work was inspired by PR #14751 and I would like to
thank @boppy for their work on this.
Thanks to @gusted for the suggestion to adjust the `pbkdf2` hashing
parameters.
Close #14751
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Added a new captcha(cloudflare turnstile) and its corresponding
document. Cloudflare turnstile official instructions are here:
https://developers.cloudflare.com/turnstile
Signed-off-by: ByLCY <bylcy@bylcy.dev>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Every user can already disable the filter manually, so the explicit
setting is absolutely useless and only complicates the logic.
Previously, there was also unexpected behavior when multiple query
parameters were present.
---------
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Most of the time forks are used for contributing code only, so not
having
issues, projects, release and packages is a better default for such
cases.
They can still be enabled in the settings.
A new option `DEFAULT_FORK_REPO_UNITS` is added to configure the default
units on forks.
Also add missing `repo.packages` unit to documentation.
code by: @brechtvl
## ⚠️ BREAKING ⚠️
When forking a repository, the fork will now have issues, projects,
releases, packages and wiki disabled. These can be enabled in the
repository settings afterwards. To change back to the previous default
behavior, configure `DEFAULT_FORK_REPO_UNITS` to be the same value as
`DEFAULT_REPO_UNITS`.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
This PR adds a task to the cron service to allow garbage collection of
LFS meta objects. As repositories may have a large number of
LFSMetaObjects, an updated column is added to this table and it is used
to perform a generational GC to attempt to reduce the amount of work.
(There may need to be a bit more work here but this is probably enough
for the moment.)
Fix #7045
Signed-off-by: Andrew Thornton <art27@cantab.net>
closes #13585
fixes #9067
fixes #2386
ref #6226
ref #6219
fixes #745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The documentation is missing the rel attribute. Neither Firefox nor
Chrome did use the linked file as CSS if rel="stylesheet" is not set.
The problem is described in issue #22434.
Co-authored-by: silverwind <me@silverwind.io>
If user has reached the maximum limit of repositories:
- Before
- disallow create
- allow fork without limit
- This patch:
- disallow create
- disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit
fixed https://github.com/go-gitea/gitea/issues/21847
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
For a long time Gitea has tested PR patches using a git apply --check
method, and in fact prior to the introduction of a read-tree assisted
three-way merge in #18004, this was the only way of checking patches.
Since #18004, the git apply --check method has been a fallback method,
only used when the read-tree three-way merge method has detected a
conflict. The read-tree assisted three-way merge method is much faster
and less resource intensive method of detecting conflicts. #18004 kept
the git apply method around because it was thought possible that this
fallback might be able to rectify conflicts that the read-tree three-way
merge detected. I am not certain if this could ever be the case.
Given the uncertainty here and the now relative stability of the
read-tree method - this PR makes using this fallback optional and
disables it by default. The hope is that users will not notice any
significant difference in conflict detection and we will be able to
remove the git apply fallback in future, and/or improve the read-tree
three-way merge method to catch any conflicts that git apply method
might have been able to fix.
An additional benefit is that patch checking should be significantly
less resource intensive and much quicker.
(See
https://github.com/go-gitea/gitea/issues/22083\#issuecomment-1347961737)
Ref #22083
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Gitea will migrate the database model version automatically, but it
should be able to be disabled and keep Gitea shutdown if the version is
not matched.
Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.
This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.
Ref #21744
Signed-off-by: Andrew Thornton <art27@cantab.net>
Enable this to require captcha validation for user login. You also must
enable `ENABLE_CAPTCHA`.
Summary:
- Consolidate CAPTCHA template
- add CAPTCHA handle and context
- add `REQUIRE_CAPTCHA_FOR_LOGIN` config and docs
- Consolidate CAPTCHA set-up and verification code
Partially resolved #6049
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
My pull request changes the logging documentation that is visible here:
https://docs.gitea.io/en-us/logging-configuration/
The reason behind the changes is that for some time I've found the
logging documentation confusing, and wanted to give a try at making it
more clear.
---
If you find the existing changes to be ok, please don't merge yet, as I
have further ideas which I want to discuss with you before making the
changes.
### Swap the "Log Groups" and "Log outputs" sections.
I want to move the "Log outputs" section before the "Log Groups"
section. The reason is that the "Log Groups" section refers to ini
sections that are only later explained, and to concepts that are general
and should be documented in "Log outputs" or a different section.
This change is essentially a swap of the "Log Groups" and "Log outputs"
sections. That way the doumentation would follow the structure in which
the ini file is built: first explaining the outer sections, and then the
inner ones ([log], [log.name], [log.name.default], ...)
### Explain the workings of ambigous settings below the settings listing
Right now the basics of a setting is shown later than the explanation of
its special workings, for example with `FILE_NAME` at [the file output
mode](https://docs.gitea.io/en-us/logging-configuration/#file-mode)
(well, if the first changes are taken into account).
Currently I have `TODO` witten at 2 settings, which I have to figure out
how do they exactly work before I can document them.
### New section about [log]
New section after "Collecting Logs for Help" about how the top level
[log] itself works and what can go there.
Currently, variables that directly go into [log] are noted throughout
the whole document.
---
Please let me know what you think about the changes.
A counterargument that I myself see is that some of this is already
present in the cheatsheet, but I think it would be better to have [this
document](https://docs.gitea.io/en-us/logging-configuration/) as a
throrough explanation of how logging is configured, and the cheatsheet
would only have a short outline of the possible sections and variables.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This patch provide a mechanism to disable RSS/Atom feed.
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
## Changes proposed in [referenced issue 21845][1]
- Expand PAM configuration description with working examples.
- Clarify `STATIC_URL_PREFIX` use (include "assets" and only works after
database has been initialized)
- Add note for HTTPS proxy support VIA Apache.
[1]: https://github.com/go-gitea/gitea/issues/21845
This PR enhances the CORS middleware usage by allowing for the headers
to be configured in `app.ini`.
Fixes #21746
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Attempt clarify the AppWorkPath in the documentation by using different
notation and adding a section to the start of the cheat sheet.
Fix #21523
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Related #20471
This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This patch:
- Rename some files( `.md` to `.en-us.md`), fix missed translation copy
- Update link which shoud be refer to `../hacking-on-gitea/` instead of
`../make/` (outdated)
- Update `_redirects`:
- redirect `/{zh-cn|fr-fr}/make/` to `../hacking-on-gitea/`
- redirect `/zh-cn/third-party-tools/` to `/zh-cn/integrations/`
- Delete duplicated/outdated files.
- Update menu `weight` of developers.zh-cn.md
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
Fix file reference at the FLAGS line at the Log subsections heading,
improve COLORIZE line wording.
The FLAGS line referenced a file that doesn't exist in the repository as
of now. The COLORIZE line's wording implied that it would
unconditionally colorize the log by default.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Updates the Config Cheat Sheet for the `ALLWAYS` option in Camo proxy.
- Clarifies the behavior for true (both HTTP and HTTPS is proxied) vs
false (only HTTP is proxied)
- Minor grammar and typo improvements
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR adds mathematical rendering with KaTeX.
The first step is to add a Goldmark extension that detects the latex
(and tex) mathematics delimiters.
The second step to make this extension only run if math support is
enabled.
The second step is to then add KaTeX CSS and JS to the head which will
load after the dom is rendered.
Fix #3445
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.
Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
This PR adds functionality to allow Gitea to sit behind an
HAProxy and HAProxy protocolled connections directly.
Fix #7508
Signed-off-by: Andrew Thornton <art27@cantab.net>
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.
Tested locally with caddy serving as reverse proxy with Tailscale
authentication.
Signed-off-by: Will Norris <will@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* increase default page sizes to 20
* adjust docs to reflect that the setting is used all over the place
* fix tests
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
