Backport #31417 by @silverwind
Make `air` log less. Uses the option added in
https://github.com/air-verse/air/pull/367.
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 3813b2786295087b3a5ecb3562fc35d90c439bf0)
#4059 was unfortunately incomplete: some custom_url fields are currently shown, even if they are not used by the provider. Moreover the `Use Custom URLs Instead of Default URLs` is always checked by default.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `GitLab`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially unchecked**
- enable the `Use Custom URLs Instead of Default URLs` checkbox
- verify that only the fields "Authorize", "Token" and "Profile" URLs are shown (no "Email URL", nor "Tenant").
- Switch the `OAuth2 provider` to `Azure AD v2`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially checked**
- verify that only the field "Tenant" is shown (with the default "organizations").
Note: this is loosely based on the upstream fix https://github.com/go-gitea/gitea/pull/31246 which I initially overlooked.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4194
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
(cherry picked from commit 65f8c22cc7)
- Make the `UserSettings` definition an non-array, this is consistent
with the existing endpoints that uses this definition.
- Resolves #4179
(cherry picked from commit 5926ed1f73)
cmd/dump.go uses os.Readdir to list the directory.
This is fine on its own, but TestAddRecursiveExclude in cmd/dump_test.go
depends on the order of the directory listing, which is where the issue
lays.
Directory listings using os.Readdir (lstat) don't actually guarantee an
order. They can differ due to a number of factors. Most notably the OS,
file system and settings.
As such, the test should not check the /order of the files/ added to the
archive, but instead simply check whether the archive /contains/ them.
So this is precisely what this commit does.
Note that only TestAddRecursiveExclude/File_inside_directory/No_exclude
has been observed to fail due to this, but all TestAddRecursiveExclude
subtests have been updated for consistency.
(cherry picked from commit 230a677c74)
While trying to understand #1236, I was quite confused not to see the `Use Custom URLs` checkbox.
This checkbox disappeared in b95a893b22 (because `getElementById` does not expect a `#` as first char), fixed in 4e816e1326.
After solving this, switching from `Nextcloud` to `OpenID Connect` triggered a JS error, which is addressed in 3efa4d836a.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `Nextcloud`
- check that the `Use Custom URLs Instead of Default URLs` checkbox toggles the fields below
- let the checkbox be checked
- Switch the `OAuth2 provider` to `OpenID Connect`
- ensure that no JS error is shown
- Switch the `OAuth2 provider` to `Mastodon`
- check that the fields below `Use Custom URLs Instead of Default URLs` have the right defaults (mastodon.social)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4059
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
(cherry picked from commit 82ae7460bf)
Fix adopt repository has empty object name in database (#31333)
Fix #31330
Fix #31311
A workaround to fix the old database is to update object_format_name to
`sha1` if it's empty or null.
(cherry picked from commit 1968c2222dcf47ebd1697afb4e79a81e74702d31)
With tests services/repository/adopt_test.go
(cherry picked from commit 8efef06fb1)
Backport #31319 by @lunny
Fix a hash render problem like `<hash>: xxxxx` which is usually used in
release notes.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit 6ca70c5bf20fc6b3a7d98d784f48b5a503962339)
Currently this string has different amount of placeholders in v8 and v7 because https://codeberg.org/forgejo/forgejo/pulls/3837 was not backported to v7.
### The problem
This string is currently [not translated](https://translate.codeberg.org/translate/forgejo/forgejo/en/?checksum=405b09ee2c2371d4) in every language. For example, when UI is in Slovenian, it would be in English.
But if someone translates it into Slovenian, it will be something like `Posodobljen %s`. Then we merge the Weblate PR, @forgejo-backport-action creates a backport and we forget to check this backport for presence of `repo_updated`. We ship this as a point release of our LTS v7, and then Slovenian users will literally see `Posodobljen %s` in the UI instead of `Posodobljen včeraj`.
By renaming this key in v7 we protect it from these kinds of regressions.
### Test
Go to Explore, look at repo entries, they should contain relative time.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4117
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
This Fixes #3962 by adding `!important` to the margin of the heading in the rendered markdown.
In the current behaviour, the margin-top was always overridden by a global css-rule. This is prevented by this change.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4076
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Beowulf <beowulf@beocode.eu>
Co-committed-by: Beowulf <beowulf@beocode.eu>
(cherry picked from commit 187860bded)
Also convert a comment into a warning in the logs when the deletion of
an artifact cannot find the file in the destination storage.
The case were an error happens while deleting the file is not covered
as it would require to mock the storage.Copy function.
(cherry picked from commit e759794408)
Change the copy to use `ActionsArtifact.StoragePath` instead of the
`ArtifactPath`. Skip artifacts that are expired, and don't error if the
file to copy does not exist.
---
When trying to migrate actions artifact storage from local to MinIO, we
encountered errors that prevented the process from completing
successfully:
* The migration tries to copy the files using the per-run
`ArtifactPath`, instead of the unique `StoragePath`.
* Artifacts that have been marked expired and had their files deleted
would throw an error
* Artifacts that are pending, but don't have a file uploaded yet will
throw an error.
This PR addresses these cases, and allow the process to complete
successfully.
(cherry picked from commit 8de8972baf5d82ff7b58ed77d78e8e1869e64eb5)
(cherry picked from commit 4afbfd3946)
Backport #31188
Fixes issue when running `choco info pkgname` where `pkgname` is also a
substring of another package Id.
Relates to #31168
---
This might fix the issue linked, but I'd like to test it with more choco
commands before closing the issue in case I find other problems if
that's ok.
I'm pretty inexperienced with Go, so feel free to nitpick things.
Not sure I handled
[this](70f87e11b5/routers/api/packages/nuget/nuget.go (L135-L137))
in the best way, so looking for feedback on if I should fix the
underlying issue (`nil` might be a better default for `Value`?).
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
(cherry picked from commit ca414a7ccf5e26272662e360c44ac50221a0f2d4)
Backport #31204 by @silverwind
Using `.segment` on the project columns is a major abuse of that class,
so remove it and instead set the border-radius directly on it.
Fixes: https://github.com/go-gitea/gitea/issues/31129
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 298d05df3b79634a0364926f34fb02b73d442c31)
Do not try to create a new authorization grant when one exists already,
thus preventing a DB-related authorization issue.
Fix https://github.com/go-gitea/gitea/pull/30790#issuecomment-2118812426
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit 9c8c9ff6d10b35de8d2d7eae0fc2646ad9bbe94a)
(cherry picked from commit 07fe5a8b13)
This commit forces the resource owner (user) to always approve OAuth 2.0
authorization requests if the client is public (e.g. native
applications).
As detailed in [RFC 6749 Section 10.2](https://www.rfc-editor.org/rfc/rfc6749.html#section-10.2),
> The authorization server SHOULD NOT process repeated authorization
requests automatically (without active resource owner interaction)
without authenticating the client or relying on other measures to ensure
that the repeated request comes from the original client and not an
impersonator.
With the implementation prior to this patch, attackers with access to
the redirect URI (e.g., the loopback interface for
`git-credential-oauth`) can get access to the user account without any
user interaction if they can redirect the user to the
`/login/oauth/authorize` endpoint somehow (e.g., with `xdg-open` on
Linux).
Fixes #25061.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 5c542ca94caa3587329167cfe9e949357ca15cf1)
(cherry picked from commit 1b088fade6)
See:
1b088fade6 Prevent automatic OAuth grants for public clients
07fe5a8b13 use existing oauth grant for public client
(cherry picked from commit 592469464b)
