Add ntlm authentication support for mail
use "github.com/Azure/go-ntlmssp"
---------
Co-authored-by: yangtan_win <YangTan@Fitsco.com.cn>
Co-authored-by: silverwind <me@silverwind.io>
Change the mailer interface to prevent leaking of possible hidden email
addresses when sending to multiple recipients.
Co-authored-by: Gusted <williamzijl7@hotmail.com>
closes #13585
fixes #9067
fixes #2386
ref #6226
ref #6219
fixes #745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Change all license headers to comply with REUSE specification.
Fix #16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Unfortunately the fallback configuration code for [mailer] that were
added in #18982 are incorrect. When you read a value from an ini section
that key is added. This leads to a failure of the fallback mechanism.
Further there is also a spelling mistake in the startTLS configuration.
This PR restructures the mailer code to first map the deprecated
settings on to the new ones - and then use ini.MapTo to map those on to
the struct with additional validation as necessary.
Ref #21744
Signed-off-by: Andrew Thornton <art27@cantab.net>
The recovery, API, Web and package frameworks all create their own HTML
Renderers. This increases the memory requirements of Gitea
unnecessarily with duplicate templates being kept in memory.
Further the reloading framework in dev mode for these involves locking
and recompiling all of the templates on each load. This will potentially
hide concurrency issues and it is inefficient.
This PR stores the templates renderer in the context and stores this
context in the NormalRoutes, it then creates a fsnotify.Watcher
framework to watch files.
The watching framework is then extended to the mailer templates which
were previously not being reloaded in dev.
Then the locales are simplified to a similar structure.
Fix #20210
Fix #20211
Fix #20217
Signed-off-by: Andrew Thornton <art27@cantab.net>
This bug affects tests which are sending emails (#20307). Some tests reinitialise the web routes (like `TestNodeinfo`) which messed up the mail templates. There is no reason why the templates should be loaded in the routes method.
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
When Gitea is running as PID 1 git will occassionally orphan child processes leading
to (defunct) processes. This PR simply sets Setpgid to true on these child processes
meaning that these defunct processes will also be correctly reaped.
Fix #19077
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Start adding mechanism to return unhandled data
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create pushback interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Pausable interface to WorkerPool and Manager
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and PushBack for the bytefifos
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and Pushback for ChannelQueues and ChannelUniqueQueues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Wire in UI for pausing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add testcases and fix a few issues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix build
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prevent "race" in the test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix jsoniter mismerge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix conflicts
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix format
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add warnings for no worker configurations and prevent data-loss with redis/levelqueue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use StopTimer
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
It appears that several versions of sendmail require that the mail is sent to them with
LF line endings instead of CRLF endings - which of course they will then convert back
to CRLF line endings to comply with the SMTP standard.
This PR adds another setting SENDMAIL_CONVERT_CRLF which will pass the message writer
through a filter. This will filter out and convert CRLFs to LFs before writing them
out to sendmail.
Fix #18024
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allways set a message-id on mails
* Add unit tests for mailer & Message-ID
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This PR registers requests with the process manager and manages hierarchy within the processes.
Git repos are then associated with a context, (usually the request's context) - with sub commands using this context as their base context.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add settings to allow different SMTP envelope from address
Sometimes it may be advisable to hide or alias the from address on an SMTP mail
envelope. This PR adds two new options to the mailer to allow setting of an overriding
from address.
Fix #17477
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Unexport SendUserMail
* Instead of "[]*models.User" or "[]string" lists infent "[]*MailRecipient" for mailer
* adopt
* code format
* TODOs for "i18n"
* clean
* no fallback for lang -> just use english
* lint
* exec testComposeIssueCommentMessage per lang and use only emails
* rm MailRecipient
* Dont reload from users from db if you alredy have in ram
* nits
* minimize diff
Signed-off-by: 6543 <6543@obermui.de>
* localize subjects
* linter ...
* Tr extend
* start tmpl edit ...
* Apply suggestions from code review
* use translation.Locale
* improve mailIssueCommentBatch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add i18n to datas
Signed-off-by: Andrew Thornton <art27@cantab.net>
* a comment
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Make sure that sendmail processes register with the process manager
* Provide a timeout for these (initially of 5 minutes)
* Add configurable value and tie in to documentation
* Tie in to the admin config page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Mail issue subscribers, rework the function
* Simplify a little more
* Fix unused variable
* Refactor mail delivery to avoid heavy load on server
* Avoid splitting into too many goroutines
* Fix comments and optimize GetMaileableUsersByIDs()
* Fix return on errors
* move all mail related codes from models to modules/mailer
* fix lint
* use DBContext instead Engine
* use WithContext not WithEngine
* Use DBContext instead of Engine
* don't use defer when sess.Close()
* move DBContext to context.go and add some methods
* move mailer from modules/ to services
* fix lint
* fix tests
* fix fmt
* add gitea copyright
* fix tests
* don't expose db functions
* make code clear
* add DefaultDBContext
* fix build
* fix bug
