* Use mount but not register for chi routes
* Fix test
* Fix test
* Fix test
* Fix comment
* turn back unnecessary change
* Remove the timout middleware since some operations may spend much time.
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes #11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc5214023.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb56.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685e.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Store task errors following migrations and display them
When migrate tasks fail store the error in the task table
and ensure that they show on the status page.
Fix #13242
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update web_src/js/index.js
* Hide the failed first
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Unfortunately there was a mistake in #13164 which fails to handle
os.PathError wrapping an os.ErrNotExist
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* The `.Use` of storageHandler before setting up the template renderer
causes a panic if there is an error to log.
* The error passed to `ctx.Error` in that case may contain sensitive
information and should not be rendered to the end user. We should
instead log the error and render a simple error message.
* There is no handling of missing avatars and this needs a 404. Minio
errors need to be mapped to standard golang errors such as
os.ErrNotExist.
* There is no logging when storage is set up.
Related #13159
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Avatar support minio
* Support repo avatar minio storage
* Add missing migration
* Fix bug
* Fix test
* Add test for minio store type on avatars and repo avatars; Add documents
* Fix bug
* Fix bug
* Add back missed avatar link method
* refactor codes
* Simplify the codes
* Code improvements
* Fix lint
* Fix test mysql
* Fix test mysql
* Fix test mysql
* Fix settings
* Fix test
* fix test
* Fix bug
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add field with isIssueWriter to front end
* Make branch field editable
* Switch frontend to form and POST from javascript
* Add /issue/id/ref endpoint to routes
* Use UpdateIssueTitle model to change ref in backend
* Removed crossreference check and adding comments on branch change
* Use ref returned from POST to update the field
* Prevent calling loadRepo from models/
* Branch/tag refreshed without page reload
* Remove filter for empty branch name
* Add clear option to tag list as well
* Delete button translation and coloring
* Fix for not showing selected branch name in new issue
* Check that branch is not being changed on a PR
* Change logic
* Notification when changing issue ref
* Fix for renamed permission parameter
* Fix for failing build
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gitea <gitea@fake.local>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* hide: 'New Project board' button
* there is no reason to show the button for users that are not signed in
* update template: specifies the condition together with another one
as per lafriks' suggestion in the comment
* chore: add proper user authorization check
* chore: also hide button if repo is archived
* chore: show project board edit/delete menu to authorized users only
* chore: drop the redundant IsSigned check
* CanWriteIssues and CanWritePulls implies (and requires) signed in user
* Add CanWriteProjects and properly assert permissions
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move serviceworker to workbox and fix SSE interference
Instead of statically hardcoding every frontend asset, this uses a
type-based approach to cache all js,css and manifest.json requests.
This also fixes the issue that the service worker was interfering with
EventSource because it was unconditionally handling all requests which
this new implementation doesn't.
Fixes: https://github.com/go-gitea/gitea/issues/11092
Fixes: https://github.com/go-gitea/gitea/issues/7372
* rethrow error instead of logging
* await .register
* Revert "rethrow error instead of logging"
This reverts commit 043162ba1f.
* improve comment
* remove JSRenderer
* add version-based cache invalidation
* refactor
* more refactor
* remove comment
* rename item to fit cache name
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Currently you can see a list of commit history for wiki pages but aren't able to view the commit diff itself. This adds the feature to view an individual commit to a wiki repo.
Closes #8999
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* routers: make /compare route available to unauthenticated users
Remove some bits of the compare interface if the user isn't signed in.
Notably, they don't need to see the "New Pull Request" button box nor the
hidden form that would fail to submit due to the POST request continuing to
require proper privileges.
Follow-up commits will improve the UI a bit around this, removing some
"Pull Request" verbiage in favor of "Compare."
* ui: home: show "compare" button for unauthenticated users
This change requires pulling in the BaseRepo unconditionally and
recording if the pull request is in-fact not allowed
(.PullRequestCtx.Allowed). If the user isn't allowed to create a pull
request, either because this isn't a fork or same-fork branch PRs aren't
allowed, then we'll name the button "Compare" instead of "Pull Request."
* ui: branch list: use the new Compare language when available
When viewing the branch listing as an unauthenticated user, you'll get
"Pull Request" buttons. use the new "Compare" verbiage instead, which
matches GitHub behavior when you can't issue a pull request from the
branches.
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Previously, this required authentication, but there's not actually
any privileged information on this page. Move the endpoint out of
the group that requires sign-in. It still requires the ability to
read issues and pull requests, so private repositories (for instance)
will not be exposed.
Fixes #10312
Fixes #11233
* Add a way to mark Conversation (code comment) resolved
mark Conversation is a way to mark a Conversation is stale
or be solved. when it's marked as stale, will be hided like
stale. all Pull Request writer , Offical Reviewers and poster
can add or remove Conversation resolved mark.
Signed-off-by: a1012112796 <1012112796@qq.com>
* fix lint
* Apply suggestions from code review
* Add ResolveDoer
* fix ui
Co-Authored-By: Lauris BH <lauris@nix.lv>
Co-Authored-By: 6543 <6543@obermui.de>
* change IsResolved to an function
Add permission check in UpdateResolveConversation
* Apply suggestions from code review
* change return error for permisson check
* add default message for deleted user
* get issue message from comment
* add migration for ``ResolveDoerID`` column
another change:
* block mark pending review as resolved because it's not necessary
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* change button color
* resolve button size
* fix code style
* remove unusefull code
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* [suggest] change merge strategy： do not check write access if user in merge white list #10935
(cherry picked from commit ba74fc6389dfcad03c273441a49b54e4d38c86ee)
* fix NPE
* Fix cross compile (#10952)
* Fix cross compile
* Add test for cross compile
* Fix drone
* Fix drone
* Also prevent CC environment not to generate
Co-authored-by: zeripath <art27@cantab.net>
* fix merge box icon color bug (#10974)
that because need some space beturn ``text`` and color defines
Signed-off-by: a1012112796 <1012112796@qq.com>
* [skip ci] Updated translations via Crowdin
* Allow X in addition to x in tasks (#10979)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove api: merge reqRepoWriter
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* add request review feature in pull request
add a way to notify specific reviewers to review like github , by add or delet a special type
review . The acton is is similar to Assign , so many code reuse the function and items of
Assignee, but the meaning and result is different.
The Permission style is is similar to github, that only writer can add a review request from Reviewers,
but the poster can recall and remove a review request after a reviwer has revied even if he don't have
Write Premission. only manager , the poster and reviewer of a request review can remove it.
The reviewers can be requested to review contain all readers for private repo , for public, contain
all writers and watchers.
The offical Review Request will block merge if Reject can block it.
an other change: add ui otify for Assignees.
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Signed-off-by: a1012112796 <1012112796@qq.com>
* new change
* add placeholder string
* do some changes follow #10238 to add review requests num on lists also
change icon for review requests to eye
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add organization wide labels
Implement organization wide labels similar to organization wide
webhooks. This lets you create individual labels for organizations that can be used
for all repos under that organization (so being able to reuse the same
label across multiple repos).
This makes it possible for small organizations with many repos to use
labels effectively.
Fixes #7406
* Add migration
* remove comments
* fix tests
* Update options/locale/locale_en-US.ini
Removed unused translation string
* show org labels in issue search label filter
* Use more clear var name
* rename migration after merge from master
* comment typo
* update migration again after rebase with master
* check for orgID <=0 per guillep2k review
* fmt
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* remove unused code
* Make sure RepoID is 0 when searching orgID per code review
* more changes/code review requests
* More descriptive translation var per code review
* func description/delete comment when issue label deleted instead of hiding it
* remove comment
* only use issues in that repo when calculating number of open issues for org label on repo label page
* Add integration test for IssuesSearch API with labels
* remove unused function
* Update models/issue_label.go
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use subquery in GetLabelIDsInReposByNames
* Fix tests to use correct orgID
* fix more tests
* IssuesSearch api now uses new BuildLabelNamesIssueIDsCondition. Add a few more tests as well
* update comment for clarity
* Revert previous code change now that we can use the new BuildLabelNamesIssueIDsCondition
* Don't sort repos by date in IssuesSearch API
After much debugging I've found a strange issue where in some cases MySQL will return a different result than other enigines if a query is sorted by a null collumn. For example with our integration test data where we don't set updated_unix in repository fixtures:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 45
Returns different results for MySQL than other engines. However, the similar query:
SELECT `id`, `owner_id`, `owner_name`, `lower_name`, `name`, `description`, `website`, `original_service_type`, `original_url`, `default_branch`, `num_watches`, `num_stars`, `num_forks`, `num_issues`, `num_closed_issues`, `num_pulls`, `num_closed_pulls`, `num_milestones`, `num_closed_milestones`, `is_private`, `is_empty`, `is_archived`, `is_mirror`, `status`, `is_fork`, `fork_id`, `is_template`, `template_id`, `size`, `is_fsck_enabled`, `close_issues_via_commit_in_any_branch`, `topics`, `avatar`, `created_unix`, `updated_unix` FROM `repository` ORDER BY updated_unix DESC LIMIT 15 OFFSET 30
Returns the same results.
This causes integration tests to fail on MySQL in certain cases but would never show up in a real installation. Since this API call always returns issues based on the optionally provided repo_priority_id or the issueID itself, there is no change to results by changing the repo sorting method used to get ids earlier in the function.
* linter is back!
* code review
* remove now unused option
* Fix newline at end of files
* more unused code
* update to master
* check for matching ids before query
* Update models/issue_label.go
Co-Authored-By: 6543 <6543@obermui.de>
* Update models/issue_label.go
* update comments
* Update routers/org/setting.go
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* Add Matrix webhook
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add template and related translations for Matrix hook
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add actual webhook routes and form
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Add missing file
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Update modules/webhook/matrix_test.go
* Use stricter regex to replace URLs
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Escape url and text
Signed-off-by: Till Faelligen <tfaelligen@gmail.com>
* Remove unnecessary whitespace
* Fix copy and paste mistake
Co-Authored-By: Tulir Asokan <tulir@maunium.net>
* Fix indention inconsistency
* Use Authorization header instead of url parameter
* Add raw commit information to webhook
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
speed up page generation by making avatar lookup occur at the browser
not at page generation
* Protect against evil email address ".."
* hash the complete email address
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Create system webhook column (and migration)
* Create system webhook DB methods
Based on the default webhook ones
* Modify router to handle system webhooks and default ones
* Remove old unused admin nav template
* Adjust orgRepoCtx to differentiate system and default webhook URLs
* Assign IsSystemWebhook when creating webhooks
* Correctly use booleans for IsSystemWebhook
* Use system webhooks when preparing webhooks for payload
* Add UI and locale changes
* Use router params to differentiate admin hook pages
* Fix deleting admin webhooks and rename method
* Add clarity to webhook docs
* Revert "Remove old unused admin nav template"
This reverts commit 191a20a738.
* Rename WebHooksNewPost to GiteaHooksNewPost for clarity
* Reintroduce blank line lost during merge conflict
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Change action GETs to POST
* submite = submit + smite
* No more # href
* Fix test
* Match other tests
* Explicit csrf
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Prevent Firefox from using apple-touch-icon
The opaque background does not work well in Firefox which uses the icon
as a "rich icon". Prevent this by not specifying it in HTML. Real Apple
devices will still request the icon on the static path.
Fixes: https://github.com/go-gitea/gitea/issues/10394
Also adjust gitignore so app.ini.sample becomes searchable and fixed a
variable name in app.ini.sample.
* fix gitignore
* Make WorkerPools and Queues flushable
Adds Flush methods to Queues and the WorkerPool
Further abstracts the WorkerPool
Adds a final step to Flush the queues in the defer from PrintCurrentTest
Fixes an issue with Settings inheritance in queues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Change to for loop
* Add IsEmpty and begin just making the queues composed WorkerPools
* subsume workerpool into the queues and create a flushable interface
* Add manager command
* Move flushall to queue.Manager and add to testlogger
* As per @guillep2k
* as per @guillep2k
* Just make queues all implement flushable and clean up the wrapped queue flushes
* cope with no timeout
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix wrong permissions check when issues/prs shared operations
* move redirect to the last of the function
* fix swagger
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add possibility to global disable repo units.
* Add Default Repo Unit app.ini setting.
* Hide units
* Hide disabled repo units
* Minor fixes
* Indicate disabled units in team settings.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* test: add current attachement responses
* refactor: check if attachement is linked and accessible by user
* chore: clean TODO
* fix: typo attachement -> attachment
* revert un-needed go.sum change
* refactor: move models logic to models
* fix TestCreateIssueAttachment which was wrongly successful
* fix unit tests with unittype added
* fix unit tests with changes
* use a valid uuid format for pgsql int. test
* test: add unit test TestLinkedRepository
* refactor: allow uploader to access unlinked attachement
* add missing blank line
* refactor: move to a separate function repo.GetAttachment
* typo
* test: remove err test return
* refactor: use repo perm for access checking generally + 404 for all reject
* Adds functionality to change target branch of created pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use const instead of var in JavaScript additions
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Check if branches are equal and if PR already exists before changing target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Make sure to check all commits
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Print error messages for user as error flash message
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Disallow changing target branch of closed or merged pull requests
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Resolve conflicts after merge of upstream/master
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Change order of branch select fields
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes duplicate check
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use ctx.Tr for translations
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Recompile JS
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Use correct translation namespace
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove redundant if condition
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves most change branch logic into pull service
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Completes comment
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Add Ref to ChangesPayload for logging changed target branches
instead of creating a new struct
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Revert changes to go.mod
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Directly use createComment method
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return 404 if pull request is not found. Move written check up
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Remove variable declaration
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return client errors on change pull request target errors
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Return error in commit.HasPreviousCommit
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds blank line
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Test patch before persisting new target branch
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update patch before testing (not working)
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes patch calls when changeing pull request target
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Removes unneeded check for base name
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Moves ChangeTargetBranch completely to pull service. Update patch status.
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Set webhook mode after errors were validated
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Update PR in one transaction
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Move logic for check if head is equal with branch to pull model
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds missing comment and simplify return
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adjust CreateComment method call
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
