Running git update-index for every individual file is slow, so add and
remove everything with a single git command.
When such a big commit lands in the default branch, it could cause PR
creation and patch checking for all open PRs to be slow, or time out
entirely. For example, a commit that removes 1383 files was measured to
take more than 60 seconds and timed out. With this change checking took
about a second.
This is related to #27967, though this will not help with commits that
change many lines in few files.
(cherry picked from commit b88e5fc72d99e9d4a0aa9c13f70e0a9e967fe057)
If a repository has
git config --add push.pushOption submit=".sourcehut/*.yml"
it failed when pushed because of the unknown submit push
option. It will be ignored instead.
Filtering out the push options is done in an earlier stage, when the
hook command runs, before it submits the options map to the private
endpoint.
* move all the push options logic to modules/git/pushoptions
* add 100% test coverage for modules/git/pushoptions
Test coverage for the code paths from which code was moved to the
modules/git/pushoptions package:
* cmd/hook.go:runHookPreReceive
* routers/private/hook_pre_receive.go:validatePushOptions
tests/integration/git_push_test.go:TestOptionsGitPush runs through
both. The test verifying the option is rejected was removed and, if
added again, will fail because the option is now ignored instead of
being rejected.
* cmd/hook.go:runHookProcReceive
* services/agit/agit.go:ProcReceive
tests/integration/git_test.go: doCreateAgitFlowPull runs through
both. It uses variations of AGit related push options.
* cmd/hook.go:runHookPostReceive
* routers/private/hook_post_receive.go:HookPostReceive
tests/integration/git_test.go:doPushCreate called by TestGit/HTTP/sha1/PushCreate
runs through both.
Note that although it provides coverage for this code path it does not use push options.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3651
Enable [unparam](https://github.com/mvdan/unparam) linter.
Often I could not tell the intention why param is unused, so I put
`//nolint` for those cases like webhook request creation functions never
using `ctx`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit fc2d75f86d77b022ece848acf2581c14ef21d43b)
Conflicts:
modules/setting/config_env.go
modules/storage/azureblob.go
services/webhook/dingtalk.go
services/webhook/discord.go
services/webhook/feishu.go
services/webhook/matrix.go
services/webhook/msteams.go
services/webhook/packagist.go
services/webhook/slack.go
services/webhook/telegram.go
services/webhook/wechatwork.go
run make lint-go and fix Forgejo specific warnings
Remove "EncodeSha1", it shouldn't be used as a general purpose hasher
(just like we have removed "EncodeMD5" in #28622)
Rewrite the "time-limited code" related code and write better tests, the
old code doesn't seem quite right.
(cherry picked from commit fb1ad920b769799aa1287441289d15477d9878c5)
Conflicts:
modules/git/utils_test.go
trivial context conflict because sha256 testing in Forgejo has diverged
More about codespell: https://github.com/codespell-project/codespell .
I personally introduced it to dozens if not hundreds of projects already and so far only positive feedback.
```
❯ grep lint-spell Makefile
@echo " - lint-spell lint spelling"
@echo " - lint-spell-fix lint spelling and fix issues"
lint: lint-frontend lint-backend lint-spell
lint-fix: lint-frontend-fix lint-backend-fix lint-spell-fix
.PHONY: lint-spell
lint-spell: lint-codespell
.PHONY: lint-spell-fix
lint-spell-fix: lint-codespell-fix
❯ git grep lint- -- .forgejo/
.forgejo/workflows/testing.yml: - run: make --always-make -j$(nproc) lint-backend checks-backend # ensure the "go-licenses" make target runs
.forgejo/workflows/testing.yml: - run: make lint-frontend
```
so how would you like me to invoke `lint-codespell` on CI? (without that would be IMHO very suboptimal and let typos sneak in)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3270
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
Resolve all cases for `unused parameter` and `unnecessary type
arguments`
Related: #30729
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit e80466f7349164ce4cf3c07bdac30d736d20f035)
Conflicts:
modules/markup/markdown/transform_codespan.go
modules/setting/incoming_email.go
routers/api/v1/admin/user_badge.go
routers/private/hook_pre_receive.go
tests/integration/repo_search_test.go
resolved by discarding the change, this is linting only and
for the sake of avoiding future conflicts
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
(cherry picked from commit 74f0c84fa4245a20ce6fb87dac1faf2aeeded2a2)
Conflicts:
.golangci.yml
apply the linter recommendations to Forgejo code as well
- The parser of `git grep`'s output uses `bufio.Scanner`, which is a good
choice overall, however it does have a limit that's usually not noticed,
it will not read more than `64 * 1024` bytes at once which can be hit in
practical scenarios.
- Use `bufio.Reader` instead which doesn't have this limitation, but is
a bit harder to work with as it's a more lower level primitive.
- Adds unit test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/3149
- `%w` is to wrap errors, but can only be used by `fmt.Errorf`. Instead
use `%v` to display the error.
- Regression of #2763
Before:
[E] failed to run attr-check. Error: %!w(*exec.ExitError=&{0xc006568e28 []})
Stderr: fatal: this operation must be run in a work tree
After:
[E] failed to run attr-check. Error: exit status 128
Stderr: fatal: this operation must be run in a work tree
`CommitGPGSignature` was originally made to store information about a
commit's GPG signature. Nowadays, it is used to store information about
SSH signatures too, and not just commit signatures, but tag signatures
too.
As such, rename it to `ObjectSignature`, because that describes what it
does a whole lot better.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Just like commits, tags can be signed with either an OpenPGP, or with an
SSH key. While the latter is supported already, SSH-signed tags have not
been. This patch teaches the git module to recognize and handle
SSH-signed tags too.
This will stop the signatures appearing in release notes, but are
currently unused otherwise.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Most time, when invoking `git.OpenRepository`, `objectFormat` will not
be used, so it's a waste to invoke commandline to get the object format.
This PR make it a lazy operation, only invoke that when necessary.
(cherry picked from commit e84e5db6de0306d514b1f1a9657931fb7197a188)
(cherry picked from commit 25b842df261452a29570ba89ffc3a4842d73f68c)
Conflicts:
routers/web/repo/wiki.go
services/repository/branch.go
services/repository/migrate.go
services/wiki/wiki.go
also apply to Forgejo specific usage of the refactored functions
Close #29509
Windows, unlike Linux, does not have signal-specified exit codes.
Therefore, we should add a Windows-specific check for Windows. If we
don't do this, the logs will always show a failed status, even though
the command actually works correctly.
If you check the Go source code in exec_windows.go, you will see that it
always returns exit code 1.
The exit code 1 does not exclusively signify a SIGNAL KILL; it can
indicate any issue that occurs when a program fails.
(cherry picked from commit 423372d84ab3d885e47d4a00cd69d6040b61cc4c)
- When a user goes opens a symlink file in Forgejo, the file would be
rendered with the path of the symlink as content.
- Add a button that is shown when the user opens a *valid* symlink file,
which means that the symlink must have an valid path to an existent
file and after 999 follows isn't a symlink anymore.
- Return the relative path from the `FollowLink` functions, because Git
really doesn't want to tell where an file is located based on the blob ID.
- Adds integration tests.
Fixes #29101
Related #29298
Discard all read data to prevent misinterpreting existing data. Some
discard calls were missing in error cases.
---------
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit d6811baf88ca6d58b92d4dc12b1f2a292198751f)
Fixes the reason why #29101 is hard to replicate.
Related #29297
Create a repo with a file with minimum size 4097 bytes (I use 10000) and
execute the following code:
```go
gitRepo, err := gitrepo.OpenRepository(db.DefaultContext, <repo>)
assert.NoError(t, err)
commit, err := gitRepo.GetCommit(<sha>)
assert.NoError(t, err)
entry, err := commit.GetTreeEntryByPath(<file>)
assert.NoError(t, err)
b := entry.Blob()
// Create a reader
r, err := b.DataAsync()
assert.NoError(t, err)
defer r.Close()
// Create a second reader
r2, err := b.DataAsync()
assert.NoError(t, err) // Should be no error but is ErrNotExist
defer r2.Close()
```
The problem is the check in `CatFileBatch`:
79217ea63c/modules/git/repo_base_nogogit.go (L81-L87)
`Buffered() > 0` is used to check if there is a "operation" in progress
at the moment. This is a problem because we can't control the internal
buffer in the `bufio.Reader`. The code above demonstrates a sequence
which initiates an operation for which the code thinks there is no
active processing. The second call to `DataAsync()` therefore reuses the
existing instances instead of creating a new batch reader.
(cherry picked from commit f74c869221624092999097af38b6f7fae4701420)
If a documentation file is marked with a `linguist-documentation=false`
attribute, include it in language stats.
However, make sure that we do *not* include documentation languages as
fallback.
Added a new test case to exercise the formerly buggy behaviour.
Problem discovered while reviewing @KN4CK3R's tests from gitea#29267.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
