When pasting a URL over another URL, replace the URL instead of creating
a useless `[url](url)`.
(Partially picked from commit 55502265716f000a2c61c98fa093244e1310d97f)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When a long line with characters such as dots is returned by a step in
an action (e.g. by the output of the Ruby on Rails test runner), it
overflows the log container, causing the page to scroll sideways.
This PR adds the CSS `overflow-wrap: anywhere;` to the
`.job-step-section .job-step-logs .job-log-line .log-msg` selector,
which causes such lines to wrap as well
(cherry picked from commit 61aaf3440142d225802e3e9ce3db28bcf71f5a7e)
(cherry picked from commit 1dfa11551c)
- Regression of #4571
- We aren't showing the ticks generated by chartjs, because we want to
show the avatar of the person instead. You can't *realy* disable that
tick, so instead I opted to make them transparent in #4571, however they
still affected the generation of ticks so if enough authors were being
shown, for some the ticks were being skipped. Adjust the settings to
make sure they are always being shown.
- Resolves https://codeberg.org/forgejo/forgejo/issues/4982
(cherry picked from commit 72f41306c2)
**Backport:** https://codeberg.org/forgejo/forgejo/pulls/4452
## Regexp fixes
This fixes #4431 by adjusting the related regular expressions. Also it allows to have multiple spaces between `-` or `*` and the following brackets.
Related is the following gitea PR: https://github.com/go-gitea/gitea/pull/3296. I wonder a bit why the author stated
> Also fixed the requirement for one character after the blank of - [ ] .
I don't see a reason why
```
- [x]
some task
```
shall not be a valid checkbox without any character after the `]`. E.g., this would render to
- [x]
some task
The third commit fixes this issue.
### Comments
- I wonder a bit why the regexp is written in such complicated way and if
```diff
- (^\s*[-*]\s*\[[\sxX]\])|(
\s*[-*]\s*\[[\sxX]\])
+ (^|
)\s*[-*]\s*\[[\sxX]\]
```
would work the same way. Edit: I tried and indeed the second regex works as expected.
- ~~Why it is actually matching the `\s` and not just the space (` `)? (but OK, no big issue)~~ Edit: `[\t]` is also allowed. Keep it!
- Check boxes in code blocks are counted as well, but I think that this is an edge case which is not a big issue as well.
### Before
### After
## Javascript fixes
Additionally, while testing I figured out, that currently checkboxes with capital `X` like
```
- [X] another task
```
- [X] another task
cannot be unchecked. Thus, the second commit fixes that issue as well.
## Checklist
The [developer guide](https://forgejo.org/docs/next/developer/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Co-authored-by: Robert Wolff <mahlzahn@posteo.de>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4735
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
Co-committed-by: forgejo-backport-action <forgejo-backport-action@noreply.codeberg.org>
- Backport of #4571
- The usage of the `vue-bar-graph` is complicated, because of the `GSAP`
dependency they pull in, the dependency uses a non-free license.
- The code is rewritten to use the `chart.js` library, which is already
used to draw other charts in the activity tab. Due to the limitation of
`chart.js`, we have to create a plugin in order to have images as labels
and do click handling for those images.
- The chart isn't the same as the previous one, once again simply due to
how `chart.js` works, the amount of commits isn't drawn anymore in the
bar, you instead have to hover over it or look at the y-axis.
- Resolves #4569
(cherry picked from commit a83002679d)
Add an empty hash `href="#"` attribute to anchors that did not yet have any `href` attribute, as a quick work-around to make those elements possible to interact with via keyboard. See discussion on linked issue (https://codeberg.org/forgejo/forgejo/issues/4273) for more information on how the button-like elements like this could eventually be improved even more.
Fixes https://codeberg.org/forgejo/forgejo/issues/4273.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4375
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: banaanihillo <banaanihillo@noreply.codeberg.org>
Co-committed-by: banaanihillo <banaanihillo@noreply.codeberg.org>
(cherry picked from commit 099682892b)
It is entirely possible that the difference between the specified
sleep time and the actual sleep time is greater than 15 seconds.
https://developer.mozilla.org/en-US/docs/Web/API/setTimeout#Notes
> Note that in either case, the actual delay may be longer than
> intended; see Reasons for delays longer than specified below.
It is however an error for the delay to be shorter.
⎯⎯⎯⎯⎯⎯⎯ Failed Tests 1 ⎯⎯⎯⎯⎯⎯⎯
FAIL web_src/js/utils.test.js > sleep
AssertionError: expected false to be truthy
❯ testSleep web_src/js/utils.test.js:192:48
190| const endTime = Date.now(); // Record the end time
191| const actualSleepTime = endTime - startTime;
192| expect(Math.abs(actualSleepTime - ms) <= 15).toBeTruthy();
| ^
193| }
194|
❯ web_src/js/utils.test.js:184:3
(cherry picked from commit a0d9d8d576)
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
#4059 was unfortunately incomplete: some custom_url fields are currently shown, even if they are not used by the provider. Moreover the `Use Custom URLs Instead of Default URLs` is always checked by default.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `GitLab`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially unchecked**
- enable the `Use Custom URLs Instead of Default URLs` checkbox
- verify that only the fields "Authorize", "Token" and "Profile" URLs are shown (no "Email URL", nor "Tenant").
- Switch the `OAuth2 provider` to `Azure AD v2`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially checked**
- verify that only the field "Tenant" is shown (with the default "organizations").
Note: this is loosely based on the upstream fix https://github.com/go-gitea/gitea/pull/31246 which I initially overlooked.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4194
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
While trying to understand #1236, I was quite confused not to see the `Use Custom URLs` checkbox.
This checkbox disappeared in b95a893b22 (because `getElementById` does not expect a `#` as first char), fixed in 4e816e1326.
After solving this, switching from `Nextcloud` to `OpenID Connect` triggered a JS error, which is addressed in 3efa4d836a.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `Nextcloud`
- check that the `Use Custom URLs Instead of Default URLs` checkbox toggles the fields below
- let the checkbox be checked
- Switch the `OAuth2 provider` to `OpenID Connect`
- ensure that no JS error is shown
- Switch the `OAuth2 provider` to `Mastodon`
- check that the fields below `Use Custom URLs Instead of Default URLs` have the right defaults (mastodon.social)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4059
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
This removes the difference between high density images and other images regarding the pasting.
## Why
With this change, all images are clickable by default again. I don't think there is any problem regarding the img size because 1. it is the old behaviour, 2. the comment container already limits the size of the image.
## Alternatives
We can add an a-tag automatically when the user pastes an image. I do not prefer this because this adds a really long text (it's already bad with the img-tag) e.g.: `<a href="/attachments/28cf2254-13be-46c6-a433-efc77f556083" target="_blank"><img width="385" alt="grafik" src="/attachments/28cf2254-13be-46c6-a433-efc77f556083"></a>`
## Testing
1. Open an issue or pull request
2. Paste an image in the comment text box
3. The image should be pasted with valid Markdown syntax
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3965
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Beowulf <beowulf@beocode.eu>
Co-committed-by: Beowulf <beowulf@beocode.eu>
This overrides handling of Tab and Enter keys in the ComboMarkdownEditor, so that:
* Pressing Tab prepending 4 spaces to the line under cursor, or all the lines in the selection.
* Pressing Shift+Tab removes up to 4 spaces.
* Pressing Enter repeats any indentation and a "repeatable" prefix (list or blockquote) from the current line.
Since Tab "capture" can interfere with keyboard navigation, it's only done if there was any previous input in the textarea or if it was selected with a pointer. Additionally, presing Esc will make the textarea lose focus, resuming tab navigation. This seems adequate to me, but I might be wrong.
Had to use the "deprecated" execCommand method, since anything else I tried messes up the undo history. There's a fallback for when (if?) it's actually removed.
Only tested in desktop Firefox and Chrome so far.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4072
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
When a comment was added and saved with the preview tab active, the
preview tab is still active, when the comment is edited again.
This adds a "hacky" solution, but it works and is simple.
Every time the edit is "started" and the editor already exists, the tab
with the edit text field gets clicked to activate it.
Fixes #1334
fixes #22907
Tested:
- [x] issue content edit
- [x] issue content change tasklist
- [x] pull request content edit
- [x] pull request change tasklist
(cherry picked from commit aa92b13164e84c26be91153b6022220ce0a27720)
Conflicts:
models/issues/comment.go
c7a389f2b2 [FEAT] allow setting the update date on issues and comments
options/locale/locale_en-US.ini
trivial context conflicts
routers/api/v1/repo/issue_comment.go
routers/api/v1/repo/issue_comment_attachment.go
services/issue/comments.go
services/issue/content.go
user blocking is implemented differently in Forgejo
routers/web/repo/issue.go
trivial difference from 6a0750177f Allow to save empty comment
user blocking is implemented differently in Forgejo
templates/repo/issue/view_content/conversation.tmpl
templates changed a lot in Forgejo but the change is
trivially ported
tests/integration/issue_test.go
other tests were added in the same region
web_src/js/features/repo-issue-edit.js
the code is still web_src/js/features/repo-legacy.js
trivially ported
This PR ports [gitea#30858](https://github.com/go-gitea/gitea/pull/30858) / [this commit](5c236bd4c0) to forgejo.
[week 2024-20 cherry pick](https://codeberg.org/forgejo/forgejo/pulls/3729)
## Tests
- [ ] Click "edit" to get into edit mode, change the title and then use Alt+Enter to save the title
## Screenshots
Before:
After:
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3797
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Fix #3638
This is a manual Forgejo-specific version of the Gitea PR https://github.com/go-gitea/gitea/pull/30862. The weekly Forgejo PR #3772 could not cherry-pick this commit due to conflicts (eg subsequent CodeSpell changes).
Only occurs with Webkit in Safari over eg `http://192..`. (not localhost).
See https://webkit.org/blog/10855/async-clipboard-api/
---
**Before**
**After**
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3805
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: David Davies-Payne <d2p@me.com>
Co-committed-by: David Davies-Payne <d2p@me.com>
The previous implementation will start multiple POST requests from the
frontend when moving a column and another bug is moving the default
column will never be remembered in fact.
- [x] This PR will allow the default column to move to a non-first
position
- [x] And it also uses one request instead of multiple requests when
moving the columns
- [x] Use a star instead of a pin as the icon for setting the default
column action
- [x] Inserted new column will be append to the end
- [x] Fix #30701 the newly added issue will be append to the end of the
default column
- [x] Fix when deleting a column, all issues in it will be displayed
from UI but database records exist.
- [x] Add a limitation for columns in a project to 20. So the sorting
will not be overflow because it's int8.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit a303c973e0264dab45a787c4afa200e183e0d953)
Conflicts:
routers/web/web.go
e91733468ef726fc9365aa4820cdd5f2ddfdaa23 Add missing database transaction for new issue (#29490) was not cherry-picked
services/issue/issue.go
fe6792dff3 Enable/disable owner and repo projects independently (#28805) was not cherry-picked
Before this patch, we were using `Date` getter/setter methods that
worked with local time to get a list of Sundays that are in the range of
some start date and end date. The problem with this was that the Sundays
are in Unix epoch time and when we changed the "startDate" argument that
was passed to make sure it is on a Sunday, this change would be
reflected when we convert it to Unix epoch time. More specifically, I
observed that we may get different Unix epochs depending on your
timezone when the returned list should rather be timezone-agnostic.
This led to issues in US timezones that caused the contributor, code
frequency, and recent commit charts to not show any chart data. This fix
resolves this by using getter/setter methods that work with UTC since it
isn't dependent on timezones.
Fixes #30851.
---------
Co-authored-by: Sam Fisher <fisher@3echelon.local>
(cherry picked from commit 22c7b3a74459833b86783e84d4708c8934d34e58)
Regression of #29920
Fixes: #30569
Also this is a rewriting to eliminate the remaining jQuery usages from code.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit d0e07083559180b124a08359fcc72f9ef695e723)
Conflicts:
- web_src/js/features/repo-common.js
Conflict resolved in favour of Gitea.
More about codespell: https://github.com/codespell-project/codespell .
I personally introduced it to dozens if not hundreds of projects already and so far only positive feedback.
```
❯ grep lint-spell Makefile
@echo " - lint-spell lint spelling"
@echo " - lint-spell-fix lint spelling and fix issues"
lint: lint-frontend lint-backend lint-spell
lint-fix: lint-frontend-fix lint-backend-fix lint-spell-fix
.PHONY: lint-spell
lint-spell: lint-codespell
.PHONY: lint-spell-fix
lint-spell-fix: lint-codespell-fix
❯ git grep lint- -- .forgejo/
.forgejo/workflows/testing.yml: - run: make --always-make -j$(nproc) lint-backend checks-backend # ensure the "go-licenses" make target runs
.forgejo/workflows/testing.yml: - run: make lint-frontend
```
so how would you like me to invoke `lint-codespell` on CI? (without that would be IMHO very suboptimal and let typos sneak in)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3270
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
This fixes `initRepoPullRequestAllowMaintainerEdit()` to submit the form correctly (as a web form, rather than as JSON payload).
Fixes #3618, cherry picked from gitea#30854.
Co-Authored-By: wxiaoguang <wxiaoguang@gmail.com>
---
Manual testing steps:
- Open a PR against any repository, with the "Allow edits from maintainers" option checked.
- Open the developer console (`Ctrl-Shift-I` on Firefox), and look at the Network tab.
- Visit the PR, find the "Allow edits from maintainers" checkbox, and click it.
- See the developer console, and check that the response says the setting is false.
- Refresh the page *completely* (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is off.
- Click the box again to enable it.
- See the developer console, and check that the response says the setting is true.
- Reload without cache again (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is now on.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3675
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This will move the settings button back to the right, like known from
older versions.
For this, the overflow-menu was changed when a setting button is
available. If no settings button is available, the behavior will not
change.
Fixes #3301
The WIP prefix toggling link on the sidebar only supported toggling
the *first* prefix specified in
`[repository.pullrequest].WORK_IN_PROGRESS_PREFIXES`. If the pull
request had a title with any other prefix, the first prefix listed in
the config was added (and then removed on toggling it off).
This little change makes all of the prefixes available for the
JavaScript function that does the toggling, and changes said function to
find the used prefix first, and toggle that.
When adding the prefix, it will still default to adding the first one
listed in the configuration, but it will happily remove any others if
those are present.
Fixes #3377.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Fixes: https://github.com/go-gitea/gitea/issues/30384
On repo settings page, there id `repo_name` was used 5 times on the same
page, some in modal and such. I think we are better off just
auto-generating these IDs in the future so that labels link up with
their form element.
Ideally this id generation would be done in backend in a subtemplate,
but seeing that we already have similar JS patches for checkboxes, I
took the easy path for now.
I also checked that these `#repo_name` were not in use in JS and the
only case where this id appears in JS is on the migration page where
it's still there.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit d4ec6b3d16496ce3b479d5a08f79823122dc2b7b)
Conflicts:
- templates/repo/settings/options.tmpl
Conflict resolved by manually removing all `id` and `for`
attributes from elements that had `repo_name` as their id.
Fixes https://github.com/go-gitea/gitea/issues/28114 and behaviour
matches vscode on desktop as well.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 49b80f8ac1cf9f0b56da0c73d0f34ef030f4c447)
- Add another selector to the list, which corresponds to the container
of the archive buttons on the release page of an repository.
- Seems like that 8d2b764607 missed
another case.
- Resolves #3180
