This commit has a fundamental flaw, in order to syncronize if external
users are still active the commit checks if the refresh token is
accepted by the OAuth provider, if that is not the case it sees that as
the user is disabled and sets the is active field to `false` to signal
that. Because it might be possible (this commit makes this a highly
likelyhood) that the OAuth provider still recognizes this user the
commit introduces code to allow users to re-active themselves via the
oauth flow if they were disabled because of this. However this code
makes no distinction in why the user was disabled and always re-actives
the user.
Thus the reactivation via the OAuth flow allows users to bypass the
manually activation setting (`[service].REGISTER_MANUAL_CONFIRM`) or if
the admin for other reasons disabled the user.
This reverts commit 21fdd28f08.
(cherry picked from commit b32f0cdfa05c3a0e34425e1b8a5dfa8b63914a01)
Conflicts:
tests/integration/wiki_test.go
"Long-Page" is missing as well as the tests package
- I made a mistake when specifying the `FOR` clause for the index hint,
I read it as being an required argument by XORM. The [MariaDB
documention](https://mariadb.com/kb/en/use-index/) tells that it
defaults to the `FOR JOIN` clause hence why I specified `JOIN` (As can
be seen in the previous PR's SQL analyze I didn't specify the `FOR`
clause). However apparently there seems to be some wizardy going on as
we need to tell MariaDB to use this index for the `ORDER BY` clause to
actually force MariaDB to use this index over the `updated_unix` index.
However because it's not actually required by XORM to specify this
value I leave this empty as mariadb is apparently smart enough to figure
out for which type we want to use this index.
- TL;DR make this index hint actually effective for MariaDB.
- Ref: #6146
- For the notifications page the unread and pinned notifications are
gathered for doer those that and are ordered by the updated unix.
MariaDB makes a bad decision (sometimes, for most users it does not make
this decision) with this query, it uses the index for the `updated_unix`
column to speed up this query, however this is not the correct index to
be taking, if the doer does not have more than 20 (the
page size) unread and pinned notifications combined MariaDB will
traverse the whole notifications table before it realizes that there are
no more notifications to be gathered. It instead should use the index
for the `user_id` column (this is what MariaDB already does for most
users), so the list that has to be traversed is limited to the doer's
notifications which is significantly less than the whole notifications
table.
- This is a different approach than what Gitea has taken to solve this
problem, which is to add a index to the (status, userid, updated_unix)
tuple (Ref: https://github.com/go-gitea/gitea/pull/32395). Adding more
and more indexes is not a good way if we can use existing indexes to get
a query to a acceptable performance.
- The code cannot use `db.Find` as it's hard to add a index hint option
specifically for this query and not for the other instances that uses
`activities_model.FindNotificationOptions`.
- Only add a index hint for MySQL as I have not been able to test if
SQLite or PostgreSQL are smart enough to use the better index (as you
need a large enough dataset to test this meaningfully).
- Integration test added to ensure the SQL is run by all databases.
---
Performance numbers (from Codeberg's database - MariaDB
10.11.6-MariaDB-0+deb12u1):
Currently:
```sql
SELECT * FROM `notification` WHERE notification.user_id=26734 AND (notification.status=3 OR notification.status=1) ORDER BY notification.updated_unix DESC LIMIT 20;
(5.731 sec)
+------+-------------+--------------+-------+--------------------------------------------------+-------------------------------+---------+-------+---------+------------+----------+------------+-------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | r_rows | filtered | r_filtered | Extra |
+------+-------------+--------------+-------+--------------------------------------------------+-------------------------------+---------+-------+---------+------------+----------+------------+-------------+
| 1 | SIMPLE | notification | index | IDX_notification_status,IDX_notification_user_id | IDX_notification_updated_unix | 8 | const | 1376836 | 1474066.00 | 50.03 | 0.00 | Using where |
+------+-------------+--------------+-------+--------------------------------------------------+-------------------------------+---------+-------+---------+------------+----------+------------+-------------+
```
Using the better index:
```sql
SELECT * FROM `notification` USE INDEX (IDX_notification_user_id) WHERE notification.user_id=26734 AND (notification.status=3 OR notification.status=1) ORDER BY notification.updated_unix DESC LIMIT 20;
(0.834 sec)
+------+-------------+--------------+--------+----------------------------------------------------------+--------------------------+---------+----------------------------------+-------+----------+----------+------------+----------------------------------------------+
| id | select_type | table | type | possible_keys | key | key_len | ref | rows | r_rows | filtered | r_filtered | Extra |
+------+-------------+--------------+--------+----------------------------------------------------------+--------------------------+---------+----------------------------------+-------+----------+----------+------------+----------------------------------------------+
| 1 | PRIMARY | notification | ref | PRIMARY,IDX_notification_status,IDX_notification_user_id | IDX_notification_user_id | 8 | const | 22042 | 10756.00 | 50.03 | 0.02 | Using where; Using temporary; Using filesort |
| 1 | PRIMARY | notification | eq_ref | PRIMARY | PRIMARY | 8 | gitea_production.notification.id | 1 | 1.00 | 100.00 | 100.00 | |
+------+-------------+--------------+--------+----------------------------------------------------------+--------------------------+---------+----------------------------------+-------+----------+----------+------------+----------------------------------------------+
```
This fixes a TODO in the code to validate the RedirectURIs when adding
or editing an OAuth application in user settings.
This also includes a refactor of the user settings tests to only create
the DB once per top-level test to avoid reloading fixtures.
(cherry picked from commit 16a7d343d78807e39df124756e5d43a69a2203a3)
Conflicts:
services/forms/user_form.go
tests/integration/user_settings_test.go
simple conflicts
Fix #29654
Fix #32481
(cherry picked from commit 703be6bf307ed19ce8dc8cd311d24aeb6e5b9861)
Conflicts:
routers/api/v1/repo/file.go
routers/web/repo/repo.go
services/repository/archiver/archiver.go
services/repository/archiver/archiver_test.go
trivial context conflicts
add missing function PathParam skipped in a very large refactor
- Although sorting can be used to make the doer the first user of the
list, this isn't optimal and can be instead done with a linear search,
remove that entry and add the doer to the front of the slice.
- Extra unit test added.
Setting ENABLE_INTERNAL_SIGNIN to false will disable the built-in
signin form, should the administrator prefer to limit users to SSO.
Continuation of forgejo/forgejo#6076
## Overview
Hi all, I'm a first-time contributor to Forgejo. I was looking for something interesting to contribute and the first thing that caught my attention was https://codeberg.org/forgejo/forgejo/issues/6043, a request for an enhancement to include "issue previews" when publishing links to social media platforms. As a bit of background, the way these platforms work is that they search for meta tags in the posted link's content, and if they find a meta `og:image` (along with other meta tags) they'll pull the image to include in the social media post. Forgejo currently provides an `og:image` tag but it just renders the repository or repository-owner's avatar.
This PR will render `og:image` for an issue or PR into a link to `{...}/summary-card`, which is a dynamically generated image that contains a summary of the issue.
## Design Notes
### Rendering / Rasterization
The tricky part of solving this problem is rendering an image that combines some text, some images, and some layout elements. To address this, I've created a `card` module which allows for a handful of operations:
- Create a new rendered image (a "Card")
- Add a margin to a card
- Split the card, horizontally or vertically, into two pieces with a proportional layout (eg. 70%/30%, as desired), each of which are "Cards" that render into the same root image
- Render text into a card, with line-wrapping and text-alignment capabilities
- Render an image onto a card
- Fetches an external image as safely as possible (for server-side fetch of Gravatar, etc.)
The card module can be reused to create `og:image` summary cards for any object in the future, although obviously it's capabilities are limited. The current implementation is on issues/PRs.
I considered a few alternative approaches before taking this approach, and here's why I rejected those options:
- Provide the summary card as an SVG object which could be rendered much more easily with a template file -- however, support for SVG isn't defined as positive for OpenGraph, and a quick look through some existing implementations suggest that it is not widely supported, if at all
- Rendering as HTML/CSS, or SVG, and then using an external tool to convert into a PNG (or other static) image -- this would be much nicer and easier to implement, but would require tying in some very heavy-weight dependencies
- Rendering using a more sophisticated graphics library, eg. cairo -- also would be nicer and easier to implement, but again a heavy dependency for a small functionality
As a result of the limited capabilities of the new card module, summary cards don't have icons on them (which would require SVG rasterization) or pretty status badges with colors and rounded rects. In the future if better drawing capabilities were added, the graphics could be improved, but it doesn't seem too important.
### External Avatars
In order to rasterize a user's avatar onto the summary card, it might have to be retrieved by the server from the external source (eg. Gravatar). A `fetchExternalImage` routine attempts to do this in the safest way possible to protect the server from any possible security exposure from this; (a) verifying that the content-types are acceptable, (b) ensuring that the file-size and image-size are within the safe bounds that are used for custom avatars, (c) using a very-short timeout to avoid stalling the server if an external dependency is offline.
### Caching
Summary cards are cached after rendered. This has the downside of causing updates to statuses, avatars, titles, etc. being stale on the summary card for the cache TTL. However, during testing I found that some social media engines like Mastodon will cause the summary card to be accessed a significant number of times after being referenced by a post, causing a mini-tornado of requests. The cache compensates for this to avoid server load in this situation.
### Scope
I'm considering out-of-scope:
- Summary cards on other objects (eg. repos, users) can be left for future implementation
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [x] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- ~~I added test coverage for JavaScript changes...~~ n/a, no JS changes
- [x] ~~in `web_src/js/*.test.js` if it can be unit tested.~~
- [x] ~~in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).~~
- Manual testing
- [x] Access & attach screenshots of both an issue and a pull-request's summary card; see below
- [x] Ensure reasonable (non-crash) behavior of rendering text with glyphs outside the font -- correctly rendered as replacement unicode chars
- [x] Using a public test instance, verify that og:image behavior looks good on platforms like Mastodon and BlueSky
- [x] Bluesky: ✅
- [x] Mastodon: ✅ (Note that the summary card will be requested many times as the post is federated; either each server, or each client, will fetch it itself)
- [x] OpenGraph test site (https://www.opengraph.xyz/): ✅
- [x] Discord: Looks OK ✅; needs "twitter:card" to be set to "summary_large_image" to display the large-scale image, but (a) that's probably annoying to use, (b) probably wrong because it doesn't match Twitter Card's spec for a "photographic image", and (c) don't want to encourage/continue use of vendor-specific tag
- [x] Verify cases with user avatar missing (or autogen), and repo avatar missing (falls back to repo owner avatar)
Pull request summary card:
Issue summary card:
(images to the right are the custom repo avatar, w/ fallback to the repo owner avatar)
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
- OpenGraph capabilities are expected to work in the background without user awareness, and so there is no need for documentation to explain the capabilities for users.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/6053
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Mathieu Fenniak <mathieu@fenniak.net>
Co-committed-by: Mathieu Fenniak <mathieu@fenniak.net>
Cherry-pick of [gitea#32542](https://github.com/go-gitea/gitea/pull/32542).
This makes /login/oauth/authorize behave the same way as the /login/oauth/userinfo endpoint. Previously, `name` property of the returned OIDCToken used to depend on the UI.DefaultShowFullName setting (I don't think this is desired behavior). Even worse, the `userinfo` endpoint can return basically the same data, but the `name` value there always returned `FullName`, even if it's empty (no fallback to `Name`).
A few notes:
I'm not sure what branch to target with this PR, please correct me if I'm chose the wrong one.
The deleted lines in the tests are duplicates, there's a copy of the whole thing just below, the only difference being the `Name` field (used to test the dependency on the UI.DefaultShowFullName setting)
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [ ] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/6071
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Baltazár Radics <baltazar.radics@gmail.com>
Co-committed-by: Baltazár Radics <baltazar.radics@gmail.com>
- Currently the TOTP secrets are stored using the `secrets` module with
as key the MD5 hash of the Secretkey, the `secrets` module uses general
bad practices. This patch migrates the secrets to use the `keying`
module (#5041) which is easier to use and use better practices to store
secrets in databases.
- Migration test added.
- Remove the Forgejo migration databases, and let the gitea migration
databases also run forgejo migration databases. This is required as the
Forgejo migration is now also touching tables that the forgejo migration
didn't create itself.
Confine the search menu to be at most the width of the page, or 80% of
the viewport width, whichever is smaller. To do this, introduce a new
`--container-width` variable for the descendant elements of
`.ui.container` to be able to access.
Also update the relevant e2e test: add a long 'lorem ipsum' page, add a
search for it, parameterize the width.
This PR adds support for the HTTP POST requests to `/userinfo` endpoint.
While the OpenID Core specification says both are supported and
recommends using HTTP GET.
ref: https://openid.net/specs/openid-connect-core-1_0.html#UserInfo
(cherry picked from commit 56bff7ae234ee21d0e4524e401a49385c383ccaf)
Conflicts:
routers/web/web.go
trivial context conflict
Extend API MarkupOptions to contain branch path.
The `api.MarkupOptions{}` to have `BranchPath` which contains the
current branch. The `RenderMarkup` function utilizes a struct since there
are too many variables passed as arguments and that is not a good sign
for readability.
And `repo-editor.js` will contain a new form data which is `branch-path`
which will then be utilized by `edit.tmpl` as `data-branch-path`.
Closes: #4510
## Checklist
The [contributor guide](https://forgejo.org/docs/next/contributor/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [ ] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [x] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [ ] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/5781
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Nirmal Kumar R <tildezero@gmail.com>
Co-committed-by: Nirmal Kumar R <tildezero@gmail.com>
It is possible to set a Email for a Organization. This Email is optional and only used to be displayed on the profile page. However, once you set an EMail, you can no longer remove it. This PR fixes that.
While working on the tests, I found out, that the API returns a 500 when trying to set an invalid EMail. I fixed that too. It returns a 422 now.
Fixes #4567
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/5517
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: JakobDev <jakobdev@gmx.de>
Co-committed-by: JakobDev <jakobdev@gmx.de>
Git has a cool feature called git notes. It allows adding a text to a commit without changing the commit itself. Forgejo already displays git notes. With this PR you can also now change git notes.
<details>
<summary>Screenshots</summary>
</details>
## Checklist
The [developer guide](https://forgejo.org/docs/next/developer/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Features
- [PR](https://codeberg.org/forgejo/forgejo/pulls/4753): <!--number 4753 --><!--line 0 --><!--description QWxsb3cgY2hhbmdpbmcgZ2l0IG5vdGVz-->Allow changing git notes<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4753
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: JakobDev <jakobdev@gmx.de>
Co-committed-by: JakobDev <jakobdev@gmx.de>
Refactoring of #32211
this move the PublicOnly() filter calcuation next to the DB querys and
let it be decided by the Doer
---
*Sponsored by Kithara Software GmbH*
(cherry picked from commit 43c252dfeaf9ab03c4db3e7ac5169bc0d69901ac)
Conflicts:
models/organization/org_test.go
models/organization/org_user_test.go
routers/web/org/home.go
rather simple conflict resolution but not trivial
tests/integration/user_count_test.go had to be adapted (simple)
because it does not exist in Gitea and uses the modified model
- Remember if fuzzy was set or not for the open/close/all states.
- Use `fuzzy=false` for test, as `fuzzy=true` is the default (this is
the opposite of all the other values).
- Remove `ctx.Link` prefix for open/close states, this makes them
suspectible to the existing tests (the other filter links are also in
the format of simply having `?xx=xx&yy=yy`).
- Fix typo in test name.
- Ensure that the specified push mirror ID belongs to the requested
repository, otherwise it is possible to modify the intervals of the push
mirrors that do not belong to the requested repository.
- Integration test added.
- If a repository is forked to a private or limited user/organization,
the fork should not be visible in the list of forks depending on the
doer requesting the list of forks.
- Added integration testing for web and API route.
- The RSS and atom feed for branches exposes details about the code, it
therefore should be guarded by the requirement that the doer has access
to the code of that repository.
- Added integration testing.
- Add a `purpose` column, this allows the `forgejo_auth_token` table to
be used by other parts of Forgejo, while still enjoying the
no-compromise architecture.
- Remove the 'roll your own crypto' time limited code functions and
migrate them to the `forgejo_auth_token` table. This migration ensures
generated codes can only be used for their purpose and ensure they are
invalidated after their usage by deleting it from the database, this
also should help making auditing of the security code easier, as we're
no longer trying to stuff a lot of data into a HMAC construction.
-Helper functions are rewritten to ensure a safe-by-design approach to
these tokens.
- Add the `forgejo_auth_token` to dbconsistency doctor and add it to the
`deleteUser` function.
- TODO: Add cron job to delete expired authorization tokens.
- Unit and integration tests added.
- Use the forked [binding](https://code.forgejo.org/go-chi/binding)
library. This library has two benefits, it removes the usage of
`github.com/goccy/go-json` (has no benefit as the minimo library is also
using it). It adds the `TrimSpace` feature, which will during the
binding part trim the spaces around the value it got from the form, this
is done before validation.
This has two major changes that significantly reduce the amount of work
done for large diffs:
* Kill a running git process when reaching the maximum number of files
in a diff, preventing it from processing the entire diff.
* When loading a diff with the URL param `file-only=true`, skip loading
stats. This speeds up loading both hidden files of a diff and sections
of a diff when clicking the "Show More" button.
A couple of minor things from profiling are also included:
* Reuse existing repo in `PrepareViewPullInfo` if head and base are the
same.
The performance impact is going to depend heavily on the individual diff
and the hardware it runs on, but when testing locally on a diff changing
100k+ lines over hundreds of files, I'm seeing a roughly 75% reduction
in time to load the result of "Show More"
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 7dcccc3bb19655a6f83dd495ffc332708d0c8678)
Fix #28121
I did some tests and found that the `missing signature key` error is
caused by an incorrect `Content-Type` header. Gitea correctly sets the
`Content-Type` header when serving files.
348d1d0f32/routers/api/packages/container/container.go (L712-L717)
However, when `SERVE_DIRECT` is enabled, the `Content-Type` header may
be set to an incorrect value by the storage service. To fix this issue,
we can use query parameters to override response header values.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
<img width="600px"
src="https://github.com/user-attachments/assets/f2ff90f0-f1df-46f9-9680-b8120222c555"
/>
In this PR, I introduced a new parameter to the `URL` method to support
additional parameters.
```
URL(path, name string, reqParams url.Values) (*url.URL, error)
```
---
Most S3-like services support specifying the content type when storing
objects. However, Gitea always use `application/octet-stream`.
Therefore, I believe we also need to improve the `Save` method to
support storing objects with the correct content type.
b7fb20e73e/modules/storage/minio.go (L214-L221)
(cherry picked from commit 0690cb076bf63f71988a709f62a9c04660b51a4f)
Conflicts:
- modules/storage/azureblob.go
Dropped the change, as we do not support Azure blob storage.
- modules/storage/helper.go
Resolved by adjusting their `discardStorage` to our
`DiscardStorage`
- routers/api/actions/artifacts.go
routers/api/actions/artifactsv4.go
routers/web/repo/actions/view.go
routers/web/repo/download.go
Resolved the conflicts by manually adding the new `nil`
parameter to the `storage.Attachments.URL()` calls.
Originally conflicted due to differences in the if expression
above these calls.
(cherry picked from commit f4d3aaeeb9e1b11c5495e4608a3f52f316c35758)
Conflicts:
- modules/charset/charset_test.go
Resolved by manually changing a `=` to `:=`, as per the
original patch. Conflict was due to `require.NoError`.
---
Conflict resolution: Trivial, for `repo_attributes.go` move where the
`IsErrCanceledOrKilled` needs to happen because of other changes that
happened in this file.
To add some words to this change: It seems to be mostly simplifying the
error handling of git operations.
(cherry picked from commit e524f63d58900557d7d57fc3bcd19d9facc8b8ee)
