- If for some reason a action log file does not longer exist in the
database or on the file system, then mark it as being cleaned up.
- Unit test added.
On postgres the new check for orphaned authorization tokens fails with:
- [E] Error: pq: syntax error at or near "." whilst counting Authorization token without existing User
Adding marks to the user table reference allows the check to succeed
- `GetSubModules` already solely stores the URL of the submodule and not
a `*SubModule` entry, so don't try to type assert it to be a struct.
- I am not able to pinpoint when this was regressed but if I had to
guess it might be #4941.
- Added integration test.
When running e2e tests on flaky networks, gravatar can cause a timeout
and test failures. Turn off, and populate avatars on e2e test suite run
to make them reliable.
(cherry picked from commit 9ac74a1a408136455a9e0586fb8e65163048597b)
Conflicts:
models/fixtures/user.yml
services/repository/contributors_graph_test.go
trivial context conflicts
We have some actions that leverage the Gitea API that began receiving
401 errors, with a message that the user was not found. These actions
use the `ACTIONS_RUNTIME_TOKEN` env var in the actions job to
authenticate with the Gitea API. The format of this env var in actions
jobs changed with go-gitea/gitea/pull/28885 to be a JWT (with a
corresponding update to `act_runner`) Since it was a JWT, the OAuth
parsing logic attempted to parse it as an OAuth token, and would return
user not found, instead of falling back to look up the running task and
assigning it to the actions user.
Make ACTIONS_RUNTIME_TOKEN in action runners could be used,
attempting to parse Oauth JWTs. The code to parse potential old
`ACTION_RUNTIME_TOKEN` was kept in case someone is running an older
version of act_runner that doesn't support the Actions JWT.
(cherry picked from commit 407b6e6dfc7ee9ebb8a16c7f1a786e4c24d0516e)
Conflicts:
services/auth/oauth2.go
trivial context conflicts because OAuth2 scopes are in Forgejo and
not yet in Gitea
PushMirrors only be used in the repository setting page. So it should
not be loaded on every repository page.
(cherry picked from commit 0d5abd9b3e04a09f5d7de720c99e3451723e028e)
Git has a cool feature called git notes. It allows adding a text to a commit without changing the commit itself. Forgejo already displays git notes. With this PR you can also now change git notes.
<details>
<summary>Screenshots</summary>
</details>
## Checklist
The [developer guide](https://forgejo.org/docs/next/developer/) contains information that will be helpful to first time contributors. There also are a few [conditions for merging Pull Requests in Forgejo repositories](https://codeberg.org/forgejo/governance/src/branch/main/PullRequestsAgreement.md). You are also welcome to join the [Forgejo development chatroom](https://matrix.to/#/#forgejo-development:matrix.org).
### Tests
- I added test coverage for Go changes...
- [ ] in their respective `*_test.go` for unit tests.
- [x] in the `tests/integration` directory if it involves interactions with a live Forgejo server.
- I added test coverage for JavaScript changes...
- [ ] in `web_src/js/*.test.js` if it can be unit tested.
- [ ] in `tests/e2e/*.test.e2e.js` if it requires interactions with a live Forgejo server (see also the [developer guide for JavaScript testing](https://codeberg.org/forgejo/forgejo/src/branch/forgejo/tests/e2e/README.md#end-to-end-tests)).
### Documentation
- [ ] I created a pull request [to the documentation](https://codeberg.org/forgejo/docs) to explain to Forgejo users how to use this change.
- [x] I did not document these changes and I do not expect someone else to do it.
### Release notes
- [ ] I do not want this change to show in the release notes.
- [x] I want the title to show in the release notes with a link to this pull request.
- [ ] I want the content of the `release-notes/<pull request number>.md` to be be used for the release notes instead of the title.
<!--start release-notes-assistant-->
## Release notes
<!--URL:https://codeberg.org/forgejo/forgejo-->
- Features
- [PR](https://codeberg.org/forgejo/forgejo/pulls/4753): <!--number 4753 --><!--line 0 --><!--description QWxsb3cgY2hhbmdpbmcgZ2l0IG5vdGVz-->Allow changing git notes<!--description-->
<!--end release-notes-assistant-->
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4753
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: JakobDev <jakobdev@gmx.de>
Co-committed-by: JakobDev <jakobdev@gmx.de>
Refactoring of #32211
this move the PublicOnly() filter calcuation next to the DB querys and
let it be decided by the Doer
---
*Sponsored by Kithara Software GmbH*
(cherry picked from commit 43c252dfeaf9ab03c4db3e7ac5169bc0d69901ac)
Conflicts:
models/organization/org_test.go
models/organization/org_user_test.go
routers/web/org/home.go
rather simple conflict resolution but not trivial
tests/integration/user_count_test.go had to be adapted (simple)
because it does not exist in Gitea and uses the modified model
- Only send a review request based on the code owner file if the code
owner user has read permissions to the pull requests of that repository.
- This avoids leaking title of PRs from private repository when a
CODEOWNER file is present which contains users that do not have access
to the private repository.
- Found by @oliverpool.
- Integration test added.
Since there is a status column in the database, the transaction is
unnecessary when downloading an archive. The transaction is blocking
database operations, especially with SQLite.
Replace #27563
(cherry picked from commit e1b269e956e955dd1dfb012f40270d73f8329092)
Resolve #32232
Users can disable the "Actions" unit for all mirror repos by running
```
gitea doctor check --run disable-mirror-actions-unit --fix
```
(cherry picked from commit a910abbb451ea89b8279b43bd818a140fe0f3b51)
Fix #32427
(cherry picked from commit 35bcd667b23de29a7b0d0bf1090fb10961d3aca3)
Conflicts:
- tests/integration/repo_tag_test.go
Resolved by manually copying the added test, and also manually
adjusting the imported Go modules.
- This unifies the security behavior of enrolling security keys with
enrolling TOTP as a 2FA method. When TOTP is enrolled, you cannot use
basic authorization (user:password) to make API request on behalf of the
user, this is now also the case when you enroll security keys.
- The usage of access tokens are the only method to make API requests on
behalf of the user when a 2FA method is enrolled for the user.
- Integration test added.
- If the incoming mail feature is enabled, tokens are being sent with
outgoing mails. These tokens contains information about what type of
action is allow with such token (such as replying to a certain issue
ID), to verify these tokens the code uses the HMAC-SHA256 construction.
- The output of the HMAC is truncated to 80 bits, because this is
recommended by RFC2104, but RFC2104 actually doesn't recommend this. It
recommends, if truncation should need to take place, it should use
max(80, hash_len/2) of the leftmost bits. For HMAC-SHA256 this works out
to 128 bits instead of the currently used 80 bits.
- Update to token version 2 and disallow any usage of token version 1,
token version 2 are generated with 128 bits of HMAC output.
- Add test to verify the deprecation of token version 1 and a general
MAC check test.
- Add a `purpose` column, this allows the `forgejo_auth_token` table to
be used by other parts of Forgejo, while still enjoying the
no-compromise architecture.
- Remove the 'roll your own crypto' time limited code functions and
migrate them to the `forgejo_auth_token` table. This migration ensures
generated codes can only be used for their purpose and ensure they are
invalidated after their usage by deleting it from the database, this
also should help making auditing of the security code easier, as we're
no longer trying to stuff a lot of data into a HMAC construction.
-Helper functions are rewritten to ensure a safe-by-design approach to
these tokens.
- Add the `forgejo_auth_token` to dbconsistency doctor and add it to the
`deleteUser` function.
- TODO: Add cron job to delete expired authorization tokens.
- Unit and integration tests added.
- This uses the `TrimSpace` preprocessing of the binding library to
remove any accidental spaces from the input.
- Integration test added.
- Resolves #4309
- Use the forked [binding](https://code.forgejo.org/go-chi/binding)
library. This library has two benefits, it removes the usage of
`github.com/goccy/go-json` (has no benefit as the minimo library is also
using it). It adds the `TrimSpace` feature, which will during the
binding part trim the spaces around the value it got from the form, this
is done before validation.
This has two major changes that significantly reduce the amount of work
done for large diffs:
* Kill a running git process when reaching the maximum number of files
in a diff, preventing it from processing the entire diff.
* When loading a diff with the URL param `file-only=true`, skip loading
stats. This speeds up loading both hidden files of a diff and sections
of a diff when clicking the "Show More" button.
A couple of minor things from profiling are also included:
* Reuse existing repo in `PrepareViewPullInfo` if head and base are the
same.
The performance impact is going to depend heavily on the individual diff
and the hardware it runs on, but when testing locally on a diff changing
100k+ lines over hundreds of files, I'm seeing a roughly 75% reduction
in time to load the result of "Show More"
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 7dcccc3bb19655a6f83dd495ffc332708d0c8678)
Fix #28121
I did some tests and found that the `missing signature key` error is
caused by an incorrect `Content-Type` header. Gitea correctly sets the
`Content-Type` header when serving files.
348d1d0f32/routers/api/packages/container/container.go (L712-L717)
However, when `SERVE_DIRECT` is enabled, the `Content-Type` header may
be set to an incorrect value by the storage service. To fix this issue,
we can use query parameters to override response header values.
https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetObject.html
<img width="600px"
src="https://github.com/user-attachments/assets/f2ff90f0-f1df-46f9-9680-b8120222c555"
/>
In this PR, I introduced a new parameter to the `URL` method to support
additional parameters.
```
URL(path, name string, reqParams url.Values) (*url.URL, error)
```
---
Most S3-like services support specifying the content type when storing
objects. However, Gitea always use `application/octet-stream`.
Therefore, I believe we also need to improve the `Save` method to
support storing objects with the correct content type.
b7fb20e73e/modules/storage/minio.go (L214-L221)
(cherry picked from commit 0690cb076bf63f71988a709f62a9c04660b51a4f)
Conflicts:
- modules/storage/azureblob.go
Dropped the change, as we do not support Azure blob storage.
- modules/storage/helper.go
Resolved by adjusting their `discardStorage` to our
`DiscardStorage`
- routers/api/actions/artifacts.go
routers/api/actions/artifactsv4.go
routers/web/repo/actions/view.go
routers/web/repo/download.go
Resolved the conflicts by manually adding the new `nil`
parameter to the `storage.Attachments.URL()` calls.
Originally conflicted due to differences in the if expression
above these calls.
(cherry picked from commit f4d3aaeeb9e1b11c5495e4608a3f52f316c35758)
Conflicts:
- modules/charset/charset_test.go
Resolved by manually changing a `=` to `:=`, as per the
original patch. Conflict was due to `require.NoError`.
This contains two backwards-compatible changes:
* in the lfs http_client, the number of lfs oids requested per batch is
loaded from lfs_client#BATCH_SIZE and defaulted to the previous value of
20
* in the lfs server/service, the max number of lfs oids allowed in a
batch api request is loaded from server#LFS_MAX_BATCH_SIZE and defaults
to 'nil' which equates to the previous behavior of 'infinite'
This fixes #32306
---------
Signed-off-by: Royce Remer <royceremer@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit c60e4dc1095ef90a790582cacfad27c972637bb2)
Conflicts:
- services/lfs/server.go
Conflict due to our Quota implementation. Resolved by manually
adding the change after the quota check.
