This is an implementation of a quota engine, and the API routes to
manage its settings. This does *not* contain any enforcement code: this
is just the bedrock, the engine itself.
The goal of the engine is to be flexible and future proof: to be nimble
enough to build on it further, without having to rewrite large parts of
it.
It might feel a little more complicated than necessary, because the goal
was to be able to support scenarios only very few Forgejo instances
need, scenarios the vast majority of mostly smaller instances simply do
not care about. The goal is to support both big and small, and for that,
we need a solid, flexible foundation.
There are thee big parts to the engine: counting quota use, setting
limits, and evaluating whether the usage is within the limits. Sounds
simple on paper, less so in practice!
Quota counting
==============
Quota is counted based on repo ownership, whenever possible, because
repo owners are in ultimate control over the resources they use: they
can delete repos, attachments, everything, even if they don't *own*
those themselves. They can clean up, and will always have the permission
and access required to do so. Would we count quota based on the owning
user, that could lead to situations where a user is unable to free up
space, because they uploaded a big attachment to a repo that has been
taken private since. It's both more fair, and much safer to count quota
against repo owners.
This means that if user A uploads an attachment to an issue opened
against organization O, that will count towards the quota of
organization O, rather than user A.
One's quota usage stats can be queried using the `/user/quota` API
endpoint. To figure out what's eating into it, the
`/user/repos?order_by=size`, `/user/quota/attachments`,
`/user/quota/artifacts`, and `/user/quota/packages` endpoints should be
consulted. There's also `/user/quota/check?subject=<...>` to check
whether the signed-in user is within a particular quota limit.
Quotas are counted based on sizes stored in the database.
Setting quota limits
====================
There are different "subjects" one can limit usage for. At this time,
only size-based limits are implemented, which are:
- `size:all`: As the name would imply, the total size of everything
Forgejo tracks.
- `size:repos:all`: The total size of all repositories (not including
LFS).
- `size:repos:public`: The total size of all public repositories (not
including LFS).
- `size:repos:private`: The total size of all private repositories (not
including LFS).
- `sizeall`: The total size of all git data (including all
repositories, and LFS).
- `sizelfs`: The size of all git LFS data (either in private or
public repos).
- `size:assets:all`: The size of all assets tracked by Forgejo.
- `size:assets:attachments:all`: The size of all kinds of attachments
tracked by Forgejo.
- `size:assets:attachments:issues`: Size of all attachments attached to
issues, including issue comments.
- `size:assets:attachments:releases`: Size of all attachments attached
to releases. This does *not* include automatically generated archives.
- `size:assets:artifacts`: Size of all Action artifacts.
- `size:assets:packages:all`: Size of all Packages.
- `size:wiki`: Wiki size
Wiki size is currently not tracked, and the engine will always deem it
within quota.
These subjects are built into Rules, which set a limit on *all* subjects
within a rule. Thus, we can create a rule that says: "1Gb limit on all
release assets, all packages, and git LFS, combined". For a rule to
stand, the total sum of all subjects must be below the rule's limit.
Rules are in turn collected into groups. A group is just a name, and a
list of rules. For a group to stand, all of its rules must stand. Thus,
if we have a group with two rules, one that sets a combined 1Gb limit on
release assets, all packages, and git LFS, and another rule that sets a
256Mb limit on packages, if the user has 512Mb of packages, the group
will not stand, because the second rule deems it over quota. Similarly,
if the user has only 128Mb of packages, but 900Mb of release assets, the
group will not stand, because the combined size of packages and release
assets is over the 1Gb limit of the first rule.
Groups themselves are collected into Group Lists. A group list stands
when *any* of the groups within stand. This allows an administrator to
set conservative defaults, but then place select users into additional
groups that increase some aspect of their limits.
To top it off, it is possible to set the default quota groups a user
belongs to in `app.ini`. If there's no explicit assignment, the engine
will use the default groups. This makes it possible to avoid having to
assign each and every user a list of quota groups, and only those need
to be explicitly assigned who need a different set of groups than the
defaults.
If a user has any quota groups assigned to them, the default list will
not be considered for them.
The management APIs
===================
This commit contains the engine itself, its unit tests, and the quota
management APIs. It does not contain any enforcement.
The APIs are documented in-code, and in the swagger docs, and the
integration tests can serve as an example on how to use them.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
- It's possible to detect if refresh tokens are used more than once, if
it's used more than it's a indication of a replay attack and it should
invalidate the associated access token. This behavior is controlled by
the `INVALIDATE_REFRESH_TOKENS` setting.
- Altough in a normal scenario where TLS is being used, it should be
very hard to get to situation where replay attacks are being used, but
this is better safe than sorry.
- Enable `INVALIDATE_REFRESH_TOKENS` by default.
* Closes https://codeberg.org/forgejo/forgejo/issues/4563
* A followup to my 2024-February investigation in the Localization room
* Restore Malayalam and Serbian locales that were deleted in 067b0c2664 and f91092453e. Bulgarian was also deleted, but we already have better Bulgarian translation.
* Remove ml-IN from the language selector. It was not usable for 1.5 years, has ~18% completion and was not maintained in those ~1.5 years. It could also have placeholder bugs due to refactors.
Restoring files gives the translators a base to work with and makes the project advertised on Weblate homepage for logged in users in the Suggestions tab. Unlike Gitea, we store our current translations directly in the repo and not on a separate platform, so it makes sense to add these files back.
Removing selector entry avoids bugs and user confusion. I will make a followup for the documentation.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4576
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Make it posible to let mails show e.g.:
`Max Musternam (via gitea.kithara.com) <gitea@kithara.com>`
Docs: https://gitea.com/gitea/docs/pulls/23
---
*Sponsored by Kithara Software GmbH*
(cherry picked from commit 0f533241829d0d48aa16a91e7dc0614fe50bc317)
Conflicts:
- services/mailer/mail_release.go
services/mailer/mail_test.go
In both cases, applied the changes manually.
Issue template dropdown can have many entries, and it could be better to
have them rendered as list later on if multi-select is enabled.
so this adds an option to the issue template engine to do so.
DOCS: https://gitea.com/gitea/docs/pulls/19
---
## demo:
```yaml
name: Name
title: Title
about: About
labels: ["label1", "label2"]
ref: Ref
body:
- type: dropdown
id: id6
attributes:
label: Label of dropdown (list)
description: Description of dropdown
multiple: true
list: true
options:
- Option 1 of dropdown
- Option 2 of dropdown
- Option 3 of dropdown
- Option 4 of dropdown
- Option 5 of dropdown
- Option 6 of dropdown
- Option 7 of dropdown
- Option 8 of dropdown
- Option 9 of dropdown
```
---
*Sponsored by Kithara Software GmbH*
(cherry picked from commit 1064e817c4a6fa6eb5170143150505503c4ef6ed)
- On a empty blockquote the callout feature would panic, as it expects
to always have at least one child.
- This panic cannot result in a DoS, because any panic that happens
while rendering any markdown input will be recovered gracefully.
- Adds a simple condition to avoid this panic.
- Update the `github.com/santhosh-tekuri/jsonschema` library from v5 to
v6.
- Update the migration loader function to a type, which is now required
in V6.
- `github.com/santhosh-tekuri/jsonschema/v6` was already used by gof3,
so removing the v5 library and using the v6 library reduces the binary
size of Forgejo.
- Before: 95912040 bytes
- After: 95706152 bytes
Running git update-index for every individual file is slow, so add and
remove everything with a single git command.
When such a big commit lands in the default branch, it could cause PR
creation and patch checking for all open PRs to be slow, or time out
entirely. For example, a commit that removes 1383 files was measured to
take more than 60 seconds and timed out. With this change checking took
about a second.
This is related to #27967, though this will not help with commits that
change many lines in few files.
(cherry picked from commit b88e5fc72d99e9d4a0aa9c13f70e0a9e967fe057)
- Remove a unused dependency. This dependency was added to handle YAML
'frontmatter' meta, parsing them and converting them to a table or
details in the resulting HTML. As can be read in the issue that reported
the behavior of YAML frontmatter being rendered literally,
https://github.com/go-gitea/gitea/issues/5377.
- It's an unused dependency as the codebase since then moved on to do this YAML
parsing and rendering on their own, this was implemented in
812cfd0ad9.
- Adds unit tests that was related to this functionality, to proof the
codebase already handles this and to prevent regressions.
- Update the `github.com/buildkite/terminal-to-html/v3` dependency from
version v3.10.1 to v3.13.0.
- Version v3.12.0 introduced an incompatible change, the return type of
`AsHTML` changed from `[]byte` to `string`. That same version also
introduced streaming mode
https://github.com/buildkite/terminal-to-html/pull/126, which allows us
to avoid reading the whole input into memory.
- Closes #4313
A test must not fail depending on the performance of the machine it
runs on. It creates false negative and serves no purpose. These are
not benchmark tests for the hardware running them.
If a repository has
git config --add push.pushOption submit=".sourcehut/*.yml"
it failed when pushed because of the unknown submit push
option. It will be ignored instead.
Filtering out the push options is done in an earlier stage, when the
hook command runs, before it submits the options map to the private
endpoint.
* move all the push options logic to modules/git/pushoptions
* add 100% test coverage for modules/git/pushoptions
Test coverage for the code paths from which code was moved to the
modules/git/pushoptions package:
* cmd/hook.go:runHookPreReceive
* routers/private/hook_pre_receive.go:validatePushOptions
tests/integration/git_push_test.go:TestOptionsGitPush runs through
both. The test verifying the option is rejected was removed and, if
added again, will fail because the option is now ignored instead of
being rejected.
* cmd/hook.go:runHookProcReceive
* services/agit/agit.go:ProcReceive
tests/integration/git_test.go: doCreateAgitFlowPull runs through
both. It uses variations of AGit related push options.
* cmd/hook.go:runHookPostReceive
* routers/private/hook_post_receive.go:HookPostReceive
tests/integration/git_test.go:doPushCreate called by TestGit/HTTP/sha1/PushCreate
runs through both.
Note that although it provides coverage for this code path it does not use push options.
Fixes: https://codeberg.org/forgejo/forgejo/issues/3651
Support legacy _links LFS batch response.
Fixes #31512.
This is backwards-compatible change to the LFS client so that, upon
mirroring from an upstream which has a batch api, it can download
objects whether the responses contain the `_links` field or its
successor the `actions` field. When Gitea must fallback to the legacy
`_links` field a logline is emitted at INFO level which looks like this:
```
...s/lfs/http_client.go:188:performOperation() [I] <LFSPointer ee95d0a27ccdfc7c12516d4f80dcf144a5eaf10d0461d282a7206390635cdbee:160> is using a deprecated batch schema response!
```
I've only run `test-backend` with this code, but added a new test to
cover this case. Additionally I have a fork with this change deployed
which I've confirmed syncs LFS from Gitea<-Artifactory (which has legacy
`_links`) as well as from Gitea<-Gitea (which has the modern `actions`).
Signed-off-by: Royce Remer <royceremer@gmail.com>
(cherry picked from commit df805d6ed0458dbec258d115238fde794ed4d0ce)
Closes #2797
I'm aware of https://github.com/go-gitea/gitea/pull/28163 exists, but since I had it laying around on my drive and collecting dust, I might as well open a PR for it if anyone wants the feature a bit sooner than waiting for upstream to release it or to be a forgejo "native" implementation.
This PR Contains:
- Support for the `workflow_dispatch` trigger
- Inputs: boolean, string, number, choice
Things still to be done:
- [x] API Endpoint `/api/v1/<org>/<repo>/actions/workflows/<workflow id>/dispatches`
- ~~Fixing some UI bugs I had no time figuring out, like why dropdown/choice inputs's menu's behave weirdly~~ Unrelated visual bug with dropdowns inside dropdowns
- [x] Fix bug where opening the branch selection submits the form
- [x] Limit on inputs to render/process
Things not in this PR:
- Inputs: environment (First need support for environments in forgejo)
Things needed to test this:
- A patch for https://code.forgejo.org/forgejo/runner to actually consider the inputs inside the workflow.
~~One possible patch can be seen here: https://code.forgejo.org/Mai-Lapyst/runner/src/branch/support-workflow-inputs~~
[PR](https://code.forgejo.org/forgejo/runner/pulls/199)
## Testing
- Checkout PR
- Setup new development runner with [this PR](https://code.forgejo.org/forgejo/runner/pulls/199)
- Create a repo with a workflow (see below)
- Go to the actions tab, select the workflow and see the notice as in the screenshot above
- Use the button + dropdown to run the workflow
- Try also running it via the api using the `` endpoint
- ...
- Profit!
<details>
<summary>Example workflow</summary>
```yaml
on:
workflow_dispatch:
inputs:
logLevel:
description: 'Log Level'
required: true
default: 'warning'
type: choice
options:
- info
- warning
- debug
tags:
description: 'Test scenario tags'
required: false
type: boolean
boolean_default_true:
description: 'Test scenario tags'
required: true
type: boolean
default: true
boolean_default_false:
description: 'Test scenario tags'
required: false
type: boolean
default: false
number1_default:
description: 'Number w. default'
default: '100'
type: number
number2:
description: 'Number w/o. default'
type: number
string1_default:
description: 'String w. default'
default: 'Hello world'
type: string
string2:
description: 'String w/o. default'
required: true
type: string
jobs:
test:
runs-on: docker
steps:
- uses: actions/checkout@v3
- run: whoami
- run: cat /etc/issue
- run: uname -a
- run: date
- run: echo ${{ inputs.logLevel }}
- run: echo ${{ inputs.tags }}
- env:
GITHUB_CONTEXT: ${{ toJson(github) }}
run: echo "$GITHUB_CONTEXT"
- run: echo "abc"
```
</details>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3334
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
This PR modifies the structs for editing and creating org teams to allow
team names to be up to 255 characters. The previous maximum length was
30 characters.
(cherry picked from commit 1c26127b520858671ce257c7c9ab978ed1e95252)
Fix adopt repository has empty object name in database (#31333)
Fix #31330
Fix #31311
A workaround to fix the old database is to update object_format_name to
`sha1` if it's empty or null.
(cherry picked from commit 1968c2222dcf47ebd1697afb4e79a81e74702d31)
With tests services/repository/adopt_test.go
Add tag protection manage via rest API.
---------
Co-authored-by: Alexander Kogay <kogay.a@citilink.ru>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit d4e4226c3cbfa62a6adf15f4466747468eb208c7)
Conflicts:
modules/structs/repo_tag.go
trivial context conflict
templates/swagger/v1_json.tmpl
fixed with make generate-swagger
Fix #31327
This is a quick patch to fix the bug.
Some parameters are using 0, some are using -1. I think it needs a
refactor to keep consistent. But that will be another PR.
(cherry picked from commit e4abaff7ffbbc5acd3aa668a9c458fbdf76f9573)
The PR replaces all `goldmark/util.BytesToReadOnlyString` with
`util.UnsafeBytesToString`, `goldmark/util.StringToReadOnlyBytes` with
`util.UnsafeStringToBytes`. This removes one `TODO`.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 1761459ebc7eb6d432eced093b4583425a5c5d4b)
Fix a hash render problem like `<hash>: xxxxx` which is usually used in
release notes.
(cherry picked from commit 7115dce773e3021b3538ae360c4e7344d5bbf45b)
Fix #31330
Fix #31311
A workaround to fix the old database is to update object_format_name to
`sha1` if it's empty or null.
(cherry picked from commit 1968c2222dcf47ebd1697afb4e79a81e74702d31)
Enable [unparam](https://github.com/mvdan/unparam) linter.
Often I could not tell the intention why param is unused, so I put
`//nolint` for those cases like webhook request creation functions never
using `ctx`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit fc2d75f86d77b022ece848acf2581c14ef21d43b)
Conflicts:
modules/setting/config_env.go
modules/storage/azureblob.go
services/webhook/dingtalk.go
services/webhook/discord.go
services/webhook/feishu.go
services/webhook/matrix.go
services/webhook/msteams.go
services/webhook/packagist.go
services/webhook/slack.go
services/webhook/telegram.go
services/webhook/wechatwork.go
run make lint-go and fix Forgejo specific warnings
use proper http time format than replacing with GMT in time.RFC1123 =)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4132
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
Co-committed-by: Shiny Nematoda <snematoda.751k2@aleeas.com>
This solution implements a new config variable MAX_ROWS, which
corresponds to the “Maximum allowed rows to render CSV files. (0 for no
limit)” and rewrites the Render function for CSV files in markup module.
Now the render function only reads the file once, having MAX_FILE_SIZE+1
as a reader limit and MAX_ROWS as a row limit. When the file is larger
than MAX_FILE_SIZE or has more rows than MAX_ROWS, it only renders until
the limit, and displays a user-friendly warning informing that the
rendered data is not complete, in the user's language.
---
Previously, when a CSV file was larger than the limit, the render
function lost its function to render the code. There were also multiple
reads to the file, in order to determine its size and render or
pre-render.
The warning: 
(cherry picked from commit f7125ab61aaa02fd4c7ab0062a2dc9a57726e2ec)
Add option to override headers of mails, gitea send out
---
*Sponsored by Kithara Software GmbH*
(cherry picked from commit aace3bccc3290446637cac30b121b94b5d03075f)
Conflicts:
docs/content/administration/config-cheat-sheet.en-us.md
does not exist in Forgejo
services/mailer/mailer_test.go
trivial context conflict
Resolves #31131.
It uses the the go-swagger `enum` property to document the activity
action types.
(cherry picked from commit cb27c438a82fec9f2476f6058bc5dcda2617aab5)
This is a PR for #3616
Currently added a new optional config `SLOGAN` in ini file. When this config is set title page is modified in APP_NAME [ - SLOGAN]
Example in image below
Add the new config value in the admin settings page (readonly)
## TODO
* [x] Add the possibility to add the `SLOGAN` config from the installation form
* [ ] Update https://forgejo.org/docs/next/admin/config-cheat-sheet
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3752
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: mirko <mirko.perillo@gmail.com>
Co-committed-by: mirko <mirko.perillo@gmail.com>
This PR adds some fields to the gitea webhook payload that
[openproject](https://www.openproject.org/) expects to exists in order
to process the webhooks.
These fields do exists in Github's webhook payload so adding them makes
Gitea's native webhook more compatible towards Github's.
Renovate tried to update redis/go-redis, but failed because they changes
the interface, they added two new functions: `BitFieldRO` and
`ObjectFreq`.
Changes:
- Update redis/go-redis
- Run mockgen:
```
mockgen -package mock -destination ./modules/queue/mock/redisuniversalclient.go github.com/redis/go-redis/v9 UniversalClient
```
References:
- https://codeberg.org/forgejo/forgejo/pulls/4009
This updates the mapping definition of the elasticsearch issue indexer backend to use `long` instead of `integer`s wherever the go type is a `int64`. Without it larger instances could run into an issue.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3982
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
It is fine to use MockVariableValue to change a setting such as:
defer test.MockVariableValue(&setting.Mirror.Enabled, true)()
But when testing for errors and mocking a function, multiple variants
of the functions will be used, not just one. MockProtect a function
will make sure that when the test fails it always restores a sane
version of the function. For instance:
defer test.MockProtect(&mirror_service.AddPushMirrorRemote)()
mirror_service.AddPushMirrorRemote = mockOne
do some tests that may fail
mirror_service.AddPushMirrorRemote = mockTwo
do more tests that may fail
We wanted to be able to use the IAM role provided by the EC2 instance
metadata in order to access S3 via the Minio configuration. To do this,
a new credentials chain is added that will check the following locations
for credentials when an access key is not provided. In priority order,
they are:
1. MINIO_ prefixed environment variables
2. AWS_ prefixed environment variables
3. a minio credentials file
4. an aws credentials file
5. EC2 instance metadata
(cherry picked from commit c0880e7695346997c6a93f05cd01634cb3ad03ee)
Conflicts:
docs/content/administration/config-cheat-sheet.en-us.md
does not exist in Forgejo
This PR split the `Board` into two parts. One is the struct has been
renamed to `Column` and the second we have a `Template Type`.
But to make it easier to review, this PR will not change the database
schemas, they are just renames. The database schema changes could be in
future PRs.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: yp05327 <576951401@qq.com>
(cherry picked from commit 98751108b11dc748cc99230ca0fc1acfdf2c8929)
Conflicts:
docs/content/administration/config-cheat-sheet.en-us.md
docs/content/index.en-us.md
docs/content/installation/comparison.en-us.md
docs/content/usage/permissions.en-us.md
non existent files
options/locale/locale_en-US.ini
routers/web/web.go
templates/repo/header.tmpl
templates/repo/settings/options.tmpl
trivial context conflicts
Remove "EncodeSha1", it shouldn't be used as a general purpose hasher
(just like we have removed "EncodeMD5" in #28622)
Rewrite the "time-limited code" related code and write better tests, the
old code doesn't seem quite right.
(cherry picked from commit fb1ad920b769799aa1287441289d15477d9878c5)
Conflicts:
modules/git/utils_test.go
trivial context conflict because sha256 testing in Forgejo has diverged
regression from 767e9634d3. It changed
the parsing of the [admin] section from being derived from the content
of each key with mustMapSetting(rootCfg, "admin", &Admin) to
explicitly listing all keys in the code.
SEND_NOTIFICATION_EMAIL_ON_NEW_USER was not added and therefore
ignored. As a consequence notifications of newly registered users were
never sent.
Summary:
- Move existing test under a `testify` Suite as `baseRedisWithServerTestSuite`
- Those tests require real redis server.
- Add `go.uber.org/mock/mockgen@latest` as dependency
- as a tool (Makefile).
- in the `go.mod` file.
- Mock redis client lives under a `mock` directory under the queue module.
- That mock module has an extra hand-written mock in-memory redis-like struct.
- Add tests using the mock redis client.
- Changed the logic around queue provider creation.
- Now the `getNewQueue` returns a Queue provider directly, not an init
function to create it.
The whole Queue module is close to impossible to test properly because
everything is private, everything goes through a struct route. Because
of that, we can't test for example what keys are used for given queue.
To overcome this, as a first step I removed one step from that hard
route by allowing custom calls to create new queue provider. To achieve
this, I moved the creation logic into the `getNewQueue` (previously it
was `getNewQueueFn`). That changes nothing on that side, everything goes
as before, except the `newXXX` call happens directly in that function
and not outside that.
That made it possible to add extra provider specific parameters to those
function (`newXXX`). For example a client on redis. Calling it through
the `getNewQueue` function, it gets `nil`.
- If the provided client is not `nil`, it will use that instead of the
connection string.
- If it's `nil` (default behaviour), it creates a new redis client as it
did before, no changes to that.
The rest of the provider code is unchanged. All these changes were
required to make it possible to generate mock clients for providers and
use them.
For the tests, the existing two test cases are good with redis server,
and they need some extra helpers, for example to start a new redis
server if required, or waiting on a redis server to be ready to use.
These helpers are only required for test cases using real redis server.
For better isolation, moved existing test under a testify Suite, and
moved them into a new test file called `base_redis_with_server_test.go`
because, well they test the code with server. These tests do exactly the
same as before, calling the same sub-tests the same way as before, the
only change is the structure of the test (remove repetition, scope
server related helper functions).
Finally, we can create unit tests without redis server. The main focus of
this group of tests are higher level overview of operations. With the
mock redis client we can set up expectations about used queue names,
received values, return value to simulate faulty state.
These new unit test functions don't test all functionality, at least
it's not aimed for it now. It's more about the possibility of doing that
and add extra tests around parts we couldn't test before, for example
key.
What extra features can test the new unit test group:
- What is the received key for given queue? For example using `prefix`,
or if all the `SXxx` calls are expected to use `queue_unique` if
it's a unique queue.
- If it's not a unique queue, no `SXxx` functions are called, because
those sets are used only to check if a value is unique or not.
- `HasItem` return `false` always if it's a non-unique queue.
- All functions are called exactly `N` times, and we don't have any
unexpected calls to redis from the code.
Signed-off-by: Victoria Nadasdi <victoria@efertone.me>
For security reasons, scoping access to a redis server via ACL rules is
a good practice. Some parts of the codebase handles prefix like cache[^1]
and session[^2], but the queue module doesn't.
This patch adds this missing functionality to the queue module.
Note about relevant test:
I tried to keep the PR as small as possible (and reasonable), and not
change how the test runs. Updated the existing test to use the same
redis address and basically duplicated the test with the extra flag. It
does NOT test if the keys are correct, it ensures only it works as
expected. To make assertions about the keys, the whole test has to be
updated as the general wrapper doesn't allow the main test to check
anything provider (redis) specific property. That's not something I
wanted to take on now.
[^1]: e4c3c039be/modules/cache/cache_redis.go (L139-L150)
[^2]: e4c3c039be/modules/session/redis.go (L122-L129)
Signed-off-by: Victoria Nadasdi <victoria@efertone.me>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3836
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Victoria Nadasdi <victoria@efertone.me>
Co-committed-by: Victoria Nadasdi <victoria@efertone.me>
Fix #30923
(cherry picked from commit effb405cae88474c27f5c8322a2627019af1cf64)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Conflicts:
- modules/setting/oauth2.go
Conflicted due to different ways of logging. Since the log
message is removed anyway, resolved by removing it.
- modules/setting/oauth2_test.go
Manually copied the test added by Gitea.
- routers/install/install.go
Not a conflict per se, but adjusted to use NewJwtSecret().
Resolve #30917
Make the APIs for adding labels and replacing labels support both label
IDs and label names so the
[`actions/labeler`](https://github.com/actions/labeler) action can work
in Gitea.
<img width="600px"
src="https://github.com/go-gitea/gitea/assets/15528715/7835c771-f637-4c57-9ce5-e4fbf56fa0d3"
/>
(cherry picked from commit b3beaed147466739de0c24fd80206b5af8b71617)
Conflicts:
- modules/structs/issue_label.go
Resolved by applying the Gitea change by hand.
- tests/integration/api_issue_label_test.go
Resolved by copying the new tests.
Merging PR may fail because of various problems. The pull request may
have a dirty state because there is no transaction when merging a pull
request. ref
https://github.com/go-gitea/gitea/pull/25741#issuecomment-2074126393
This PR moves all database update operations to post-receive handler for
merging a pull request and having a database transaction. That means if
database operations fail, then the git merging will fail, the git client
will get a fail result.
There are already many tests for pull request merging, so we don't need
to add a new one.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit ebf0c969403d91ed80745ff5bd7dfbdb08174fc7)
Conflicts:
modules/private/hook.go
routers/private/hook_post_receive.go
trivial conflicts because
263a716cb5 * Performance optimization for git push (#30104)
was not cherry-picked and because of
998a431747 Do not update PRs based on events that happened before they existed
More about codespell: https://github.com/codespell-project/codespell .
I personally introduced it to dozens if not hundreds of projects already and so far only positive feedback.
```
❯ grep lint-spell Makefile
@echo " - lint-spell lint spelling"
@echo " - lint-spell-fix lint spelling and fix issues"
lint: lint-frontend lint-backend lint-spell
lint-fix: lint-frontend-fix lint-backend-fix lint-spell-fix
.PHONY: lint-spell
lint-spell: lint-codespell
.PHONY: lint-spell-fix
lint-spell-fix: lint-codespell-fix
❯ git grep lint- -- .forgejo/
.forgejo/workflows/testing.yml: - run: make --always-make -j$(nproc) lint-backend checks-backend # ensure the "go-licenses" make target runs
.forgejo/workflows/testing.yml: - run: make lint-frontend
```
so how would you like me to invoke `lint-codespell` on CI? (without that would be IMHO very suboptimal and let typos sneak in)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3270
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
Fix #30807
reuse functions in services
(cherry picked from commit a50026e2f30897904704895362da0fb12c7e5b26)
Conflicts:
models/issues/issue_update.go
routers/api/v1/repo/issue.go
trivial context conflict because of 'allow setting the update date on issues and comments'
The test had a dependency on `https://api.pwnedpasswords.com` which
caused many failures on CI recently:
```
--- FAIL: TestPassword (2.37s)
pwn_test.go:41: Get "https://api.pwnedpasswords.com/range/e6b6a": context deadline exceeded (Client.Timeout exceeded while awaiting headers)
FAIL
coverage: 82.9% of statements
```
(cherry picked from commit 9235442ba58524c8d12ae54865d583acfa1f439d)
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit be112c1fc30f87a248b30f48e891d1c8c18e8280)
Conflicts:
routers/web/web.go
trivial conflict because of https://codeberg.org/forgejo/forgejo/pulls/1533
Resolve all cases for `unused parameter` and `unnecessary type
arguments`
Related: #30729
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit e80466f7349164ce4cf3c07bdac30d736d20f035)
Conflicts:
modules/markup/markdown/transform_codespan.go
modules/setting/incoming_email.go
routers/api/v1/admin/user_badge.go
routers/private/hook_pre_receive.go
tests/integration/repo_search_test.go
resolved by discarding the change, this is linting only and
for the sake of avoiding future conflicts
Adjust the `anyHashPattern` to match URL query parameters too, and
adjust `fullHashPatternProcessor` accordingly.
Includes a test case, and an update to an existing one to account for
the new capture group.
Fixes #3548.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When mentioning a user, the markup post-processor did not handle the
case where the mentioned user did not exist well: it tried to skip to
the next node, which in turn, ended up skipping the rest of the line.
To fix this, lets skip just the mentioned, but non-existing user, and
continue processing the current node from there.
Fixes #3535.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Suggested by logs in #30729
- Remove `math/rand.Seed`
`rand.Seed is deprecated: As of Go 1.20 there is no reason to call Seed
with a random value.`
- Replace `math/rand.Read`
`rand.Read is deprecated: For almost all use cases, [crypto/rand.Read]
is more appropriate.`
- Replace `math/rand` with `math/rand/v2`, which is available since Go
1.22
(cherry picked from commit 7b8e418da1e082786b844562a05864ec1177ce97)
Should resolve #30642.
Before this commit, we were treating an empty `?sort=` query parameter
as the correct sorting type (which is to sort issues in descending order
by their created UNIX time). But when we perform `sort=latest`, we did
not include this as a type so we would sort by the most recently updated
when reaching the `default` switch statement block.
This commit fixes this by considering the empty string, "latest", and
just any other string that is not mentioned in the switch statement as
sorting by newest.
(cherry picked from commit 9b7af4340c36d3e1888788499d16f83feeb1601b)
Noteable additions:
- `redefines-builtin-id` forbid variable names that shadow go builtins
- `empty-lines` remove unnecessary empty lines that `gofumpt` does not
remove for some reason
- `superfluous-else` eliminate more superfluous `else` branches
Rules are also sorted alphabetically and I cleaned up various parts of
`.golangci.yml`.
(cherry picked from commit 74f0c84fa4245a20ce6fb87dac1faf2aeeded2a2)
Conflicts:
.golangci.yml
apply the linter recommendations to Forgejo code as well
This adds a new options to releases to hide the links to the automatically generated archives. This is useful, when the automatically generated Archives are broken e.g. because of Submodules.
Note:
This juts hides the Archives from the UI. Users can still download 5the Archive if they know t correct URL.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3139
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: JakobDev <jakobdev@gmx.de>
Co-committed-by: JakobDev <jakobdev@gmx.de>
If `[email.incoming].USE_TLS` is set, but the port isn't, infer the
default from `.USE_TLS`: set the port to 993 if using tls, and to 143
otherwise. Explicitly setting a port overrides this.
Fixes #3357.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The keys for setting the username and password for incoming and outgoing
mail are inconsisent: one uses `USERNAME` and `PASSWORD`, the other uses
`USER` and `PASSWD`.
To make things simpler, allow both to be configured by either, thus,
`[mailer].USERNAME` and `[mailer.PASSWORD]` will be aliases for `.USER`
and `.PASSWD`, and similarly, `[email.incoming].USER` and
`[email.incoming].PASSWD` will be aliases for `.USERNAME` and
`.PASSWORD`.
Fixes #3355.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Related to #30375.
It doesn't make sense to import `modules/web/middleware` and
`modules/setting` in `modules/web/session` since the last one is more
low-level.
And it looks like a workaround to call `DeleteLegacySiteCookie` in
`RegenerateSession`, so maybe we could reverse the importing by
registering hook functions.
(cherry picked from commit 61457cdf6b49225ae831fd9fb084deadd8bdb0fb)
Using the API, a user's _source_id_ can be set in the _CreateUserOption_
model, but the field is not returned in the _User_ model.
This PR updates the _User_ model to include the field _source_id_ (The
ID of the Authentication Source).
(cherry picked from commit 58b204b813cd3a97db904d889d552e64a7e398ff)
- Add new `Compare` struct to represent comparison between two commits
- Introduce new API endpoint `/compare/*` to get commit comparison
information
- Create new file `repo_compare.go` with the `Compare` struct definition
- Add new file `compare.go` in `routers/api/v1/repo` to handle
comparison logic
- Add new file `compare.go` in `routers/common` to define `CompareInfo`
struct
- Refactor `ParseCompareInfo` function to use `common.CompareInfo`
struct
- Update Swagger documentation to include the new API endpoint for
commit comparison
- Remove duplicate `CompareInfo` struct from
`routers/web/repo/compare.go`
- Adjust base path in Swagger template to be relative (`/api/v1`)
GitHub API
https://docs.github.com/en/rest/commits/commits?apiVersion=2022-11-28#compare-two-commits
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
(cherry picked from commit c70e442ce4b99e2a1f1bf216afcfa1ad78d1925a)
Conflicts:
- routers/api/v1/swagger/repo.go
Conflict resolved by manually adding the lines from the Gitea
PR.
- Fixes wrong usage of AppURL
- Fixes wrong rendering with extra path segments when AppSubURL is empty
- Now also renders all links when 2+ permalinks are present
Rather than using an scp-style URI, use the same URL style for SSH
clones as for HTTP(S) ones. This is not only more consistent, but the
URL style allows one to specify a port, and makes it clear that it is an
SSH clone URL.
git itself favours the URL style, and mentions the scp-style in passing
only. Said style is prominently used by GitHub, and might be more
familiar for a lot of people, but other than familiarity, it has no
advantage over the URL style.
For the benefit of consistency, and flexibility, lets flip the default,
and make it the URL style. Instance admins who prefer to use the
scp-style, and are running SSH on its standard port, can change the
setting back to false.
This addresses #3193.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
When editing a user via the API, do not require setting `login_name` or
`source_id`: for local accounts, these do not matter. However, when
editing a non-local account, require *both*, as before.
Fixes #1861.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
The global wiki editability can be set via the web UI, this patch makes
it possible to set the same thing via the API too. This is accomplished
by adjusting the GET and PATCH handlers of the
`/api/v1/repos/{owner}/{repo}` route.
The first will include the property when checking the repo's settings,
the second allows a repo admin to change the setting too.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Many places have the following logic:
```go
func (jobs ActionJobList) GetRunIDs() []int64 {
ids := make(container.Set[int64], len(jobs))
for _, j := range jobs {
if j.RunID == 0 {
continue
}
ids.Add(j.RunID)
}
return ids.Values()
}
```
this introduces a `container.FilterMapUnique` function, which reduces
the code above to:
```go
func (jobs ActionJobList) GetRunIDs() []int64 {
return container.FilterMapUnique(jobs, func(j *ActionRunJob) (int64, bool) {
return j.RunID, j.RunID != 0
})
}
```
Conflicts:
models/issues/comment_list.go due to premature refactor in #3116
Only split the file into small ones (and rename AttentionTypes to
attentionTypes)
(cherry picked from commit 71706126b56616750a65290460fd211b9b8449da)
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Conflicts:
- modules/markup/markdown/goldmark.go
- modules/markup/markdown/transform_blockquote.go
Conflicts were resolved by favouring the Forgejo implementation:
I copied the Forgejo code to the same place Gitea copied them
to, and adjusted the imports accordingly.
Apart from conflict resolution, this also moves
`applyElementDir` from a local func in `goldmark.Transform` to a
method on `*ASTTransformer`, to make it callable from the
extracted functions.
Cookies may exist on "/subpath" and "/subpath/" for some legacy reasons (eg: changed CookiePath behavior in code). The legacy cookie should be removed correctly.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
(cherry picked from commit b18c04ebde94e23d97da4958173faea843d5344f)
Since https://github.com/go-gitea/gitea/pull/25686, a few `interface{}`
have sneaked into the codebase. Add this replacement to `make fmt` to
prevent this from happening again.
Ideally a linter would do this, but I haven't found any suitable.
(cherry picked from commit c77e8140bc2ac6521dbebfb77613dce2648bfcb8)
Conflicts:
- .gitattributes
Trivial conflict resolved by picking our choice of language
for `*.tmpl` files.
`log.Xxx("%v")` is not ideal, this PR adds necessary context messages.
Remove some unnecessary logs.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 83f83019ef3471b847a300f0821499b3896ec987)
Conflicts:
- modules/util/util.go
Conflict resolved by picking `util.Iif` from 654cfd1dfbd3f3f1d94addee50b6fe2b018a49c3
1. The previous color contrast calculation function was incorrect at
least for the `#84b6eb` where it output low-contrast white instead of
black. I've rewritten these functions now to accept hex colors and to
match GitHub's calculation and to output pure white/black for maximum
contrast. Before and after:
<img width="94" alt="Screenshot 2024-04-02 at 01 53 46"
src="https://github.com/go-gitea/gitea/assets/115237/00b39e15-a377-4458-95cf-ceec74b78228"><img
width="90" alt="Screenshot 2024-04-02 at 01 51 30"
src="https://github.com/go-gitea/gitea/assets/115237/1677067a-8d8f-47eb-82c0-76330deeb775">
2. Fix project-related issues:
- Expose the new `ContrastColor` function as template helper and use it
for project cards, replacing the previous JS solution which eliminates a
flash of wrong color on page load.
- Fix a bug where if editing a project title, the counter would get
lost.
- Move `rgbToHex` function to color utils.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
---
Conflict resolution: Trivial.
(cherry picked from commit 36887ed3921d03f1864360c95bd2ecf853bfbe72)
Related to #2773
Related to Refactor URL detection [gitea#29960](https://github.com/go-gitea/gitea/pull/29960)
Related to Refactor external URL detection [gitea#29973](https://github.com/go-gitea/gitea/pull/29973)
I added a bunch of tests to `httplib.TestIsRiskyRedirectURL` and some cases should be better handled (however it is not an easy task).
I also ported the removal of `utils.IsExternalURL`, since it prevents duplicated (subtle) code.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3167
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
This PR fixes the possible ambiguity of rendered inline permalinks across repos by adding it as a suffix to the title element if the permalink refers to a file not inside the current repository. Closes #2965
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3042
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
- The parser of `git grep`'s output uses `bufio.Scanner`, which is a good
choice overall, however it does have a limit that's usually not noticed,
it will not read more than `64 * 1024` bytes at once which can be hit in
practical scenarios.
- Use `bufio.Reader` instead which doesn't have this limitation, but is
a bit harder to work with as it's a more lower level primitive.
- Adds unit test.
- Resolves https://codeberg.org/forgejo/forgejo/issues/3149
