* Nicely handle missing user in collaborations
It is possible to have a collaboration in a repository which refers to a no-longer
existing user. This causes the repository transfer to fail with an unusual error.
This PR makes `repo.getCollaborators()` nicely handle the missing user by ghosting
the collaboration but also adds consistency check. It also adds an
Access consistency check.
Fix #17044
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
There was a serious issue with the `gitea dump` command in 1.14.3-1.14.6 which led to corruption of the `config` field of the `repo_unit` table.
This PR adds a doctor command to attempt to fix the broken repo_units. Users affected by #16961 should run:
```
gitea doctor --fix --run fix-broken-repo-units
```
Fix #16961
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow LDAP Sources to provide Avatars
Add setting to LDAP source to allow it to provide an Avatar.
Currently this is required to point to the image bytes.
Fix #4144
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rename as Avatar Attribute (drop JPEG)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always synchronize avatar if there is change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Actually get the avatar from the ldap
Signed-off-by: Andrew Thornton <art27@cantab.net>
* clean-up
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use len()>0 rather than != ""
Signed-off-by: Andrew Thornton <art27@cantab.net>
* slight shortcut in IsUploadAvatarChanged
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* DBContext is just a Context
This PR removes some of the specialness from the DBContext and makes it context
This allows us to simplify the GetEngine code to wrap around any context in future
and means that we can change our loadRepo(e Engine) functions to simply take contexts.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix unit tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* another place that needs to set the initial context
Signed-off-by: Andrew Thornton <art27@cantab.net>
* avoid race
Signed-off-by: Andrew Thornton <art27@cantab.net>
* change attachment error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix commit status index problem
* remove unused functions
* Add fixture and test for migration
* Fix lint
* Fix fixture
* Fix lint
* Fix test
* Fix bug
* Fix bug
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR adds a `ListOptions` type which is not paged but uses absolute values. It is implemented as discussed in Discord.
Extracted from #16510 to clean that PR.
When converting repositories from forks to normal the root NumFork needs to be
decremented too.
Fix #17026
Signed-off-by: Andrew Thornton <art27@cantab.net>
The rollback functionality in
services/repository/repository.go:ForkRepository is incorrect and could
lead to a deadlock as it uses DeleteRepository to delete the rolled-back
repository - a function which creates its own transaction.
This PR adjusts the rollback function to only use RemoveAll as any
database changes will be automatically rolled-back. It also handles
panics and adjusts the Close within WithTx to ensure that if there is a
panic the session will always be closed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Fixes #16381
Note that changes to unprotected files via the web editor still cannot be pushed directly to the protected branch. I could easily add such support for edits and deletes if needed. But for adding, uploading or renaming unprotected files, it is not trivial.
* Extract & Move GetAffectedFiles to modules/git
if AllowedUserVisibilityModes allow only public & limited, and orgs can be private, a user can create a repo to that organisation whitch will result in an update of the user. On this call the user is validaten and will be rejected since private is not allowed, but its not an user its an valid org ...
Co-authored-by: Alexey 〒erentyev <axifnx@gmail.com>
When create a new issue or comment and paste/upload an attachment/image, it will not assign an issue id before submit. So if user give up the creating, the attachments will lost key feature and become dirty content. We don't know if we need to delete the attachment even if the repository deleted.
This PR add a repo_id in attachment table so that even if a new upload attachment with no issue_id or release_id but should have repo_id. When deleting a repository, they could also be deleted.
Co-authored-by: 6543 <6543@obermui.de>
Calculate and return the number of Repositories on the dashboard
Organization list.
This PR restores some of the logic that was removed in #14032 to
calculate the number of repos on the dashboard orgs list.
Fix #16648
Replaces #16799
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix dump and restore
* return different error message for get commit
* Fix missing delete release attachment when deleting repository
* Fix ci and add some comments
Co-authored-by: zeripath <art27@cantab.net>
* Refactor the fork service slightly to take ForkRepoOptions
This reduces the number of places we need to change if we want to add other
options during fork time.
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Fix integrations and tests after ForkRepository refactor
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* Update OldRepo -> BaseRepo
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
* gofmt pass
Signed-off-by: Kyle Evans <kevans@FreeBSD.org>
#16831 has occurred because of a missed regression. This PR adds a simple test to
try to prevent this occuring again.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Make the group_id a primary key in issue_index. This already has an unique index
and therefore is a good candidate for becoming a primary key.
This PR also changes all other uses of this table to add the group_id as the
primary key.
Fix #16802
Signed-off-by: Andrew Thornton <art27@cantab.net>
The MySQL indexes are not being renamed at the same time as RENAME table despite the
CASCADE. Therefore it is probably better to just recreate the indexes instead.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
One of the issues holding back performance of the API is the problem of hashing.
Whilst banning BASIC authentication with passwords will help, the API Token scheme
still requires a PBKDF2 hash - which means that heavy API use (using Tokens) can
still cause enormous numbers of hash computations.
A slight solution to this whilst we consider moving to using JWT based tokens and/or
a session orientated solution is to simply cache the successful tokens. This has some
security issues but this should be balanced by the security issues of load from
hashing.
Related #14668
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add info about list endpoints to CONTRIBUTING.md
* Let all list endpoints return X-Total-Count header
* Add TODOs for GetCombinedCommitStatusByRef
* Fix models/issue_stopwatch.go
* Rrefactor models.ListDeployKeys
* Introduce helper func and use them for SetLinkHeader related func
* Restore compatibility with SQLServer 2008 R2 in migrations
`ALTER TABLE DROP ... IF EXISTS ...` is only supported in SQL Server >16.
The `IF EXISTS` here is a belt-and-braces and does not need to be present. Therefore
can be dropped.
We need to figure out some way of restricting our SQL syntax against the minimum
version of SQL Server we will support.
My suspicion is that `ALTER DATABASE database_name SET COMPATIBILITY_LEVEL = 100` may
do that but there may be other side-effects so I am not whether to do that.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* try just dropping the index only
Signed-off-by: Andrew Thornton <art27@cantab.net>
* use lowercase for system tables
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Fix add authentication page
There is a regression in #16199 whereby the add authentication page
fails to react to the change in selected type.
This is due to the String() method on the LoginSourceType which is ameliorated
with an Int() function being added.
Following on from this there are a few other related bugs.
Fix #16541
Signed-off-by: Andrew Thornton <art27@cantab.net>
`models` does far too much. In particular it handles all `UserSignin`.
It shouldn't be responsible for calling LDAP, SMTP or PAM for signing in.
Therefore we should move this code out of `models`.
This code has to depend on `models` - therefore it belongs in `services`.
There is a package in `services` called `auth` and clearly this functionality belongs in there.
Plan:
- [x] Change `auth.Auth` to `auth.Method` - as they represent methods of authentication.
- [x] Move `models.UserSignIn` into `auth`
- [x] Move `models.ExternalUserLogin`
- [x] Move most of the `LoginVia*` methods to `auth` or subpackages
- [x] Move Resynchronize functionality to `auth`
- Involved some restructuring of `models/ssh_key.go` to reduce the size of this massive file and simplify its files.
- [x] Move the rest of the LDAP functionality in to the ldap subpackage
- [x] Re-factor the login sources to express an interfaces `auth.Source`?
- I've done this through some smaller interfaces Authenticator and Synchronizable - which would allow us to extend things in future
- [x] Now LDAP is out of models - need to think about modules/auth/ldap and I think all of that functionality might just be moveable
- [x] Similarly a lot Oauth2 functionality need not be in models too and should be moved to services/auth/source/oauth2
- [x] modules/auth/oauth2/oauth2.go uses xorm... This is naughty - probably need to move this into models.
- [x] models/oauth2.go - mostly should be in modules/auth/oauth2 or services/auth/source/oauth2
- [x] More simplifications of login_source.go may need to be done
- Allow wiring in of notify registration - *this can now easily be done - but I think we should do it in another PR* - see #16178
- More refactors...?
- OpenID should probably become an auth Method but I think that can be left for another PR
- Methods should also probably be cleaned up - again another PR I think.
- SSPI still needs more refactors.* Rename auth.Auth auth.Method
* Restructure ssh_key.go
- move functions from models/user.go that relate to ssh_key to ssh_key
- split ssh_key.go to try create clearer function domains for allow for
future refactors here.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* Update locale_cs-CZ.ini
fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* Update templates/admin/hook_new.tmpl
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update services/webhook/wechatwork.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* 修善wechatwork
* 修善wechatwork
* fix
* fix build
* fix
* fix build
* make webhooks.zh-cn.md
* delet unnecessary blank line
* delet unnecessary blank line
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix wechat
* fix wechat
* fix wechat
* fix wechat
* Fix invalid params and typo of email templates (#16394)
Signed-off-by: Meano <meanocat@gmail.com>
* Add LRU mem cache implementation (#16226)
The current default memory cache implementation is unbounded in size and number of
objects cached. This is hardly ideal.
This PR proposes creating a TwoQueue LRU cache as the underlying cache for Gitea.
The cache is limited by the number of objects stored in the cache (rather than size)
for simplicity. The default number of objects is 50000 - which is perhaps too small
as most of our objects cached are going to be much less than 1kB.
It may be worth considering using a different LRU implementation that actively limits
sizes or avoids GC - however, this is just a beginning implementation.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Replace `plugins/docker` with `techknowlogick/drone-docker`in ci (#16407)
* plugins/docker -> techknowlogick/drone-docker
* It is multi-arch
* docs: rewrite email setup (#16404)
* Add intro for both the docs page and mailer methods
* Fix numbering level in SMTP section
* Recommends implicit TLS
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
* Validate Issue Index before querying DB (#16406)
* Fix external renderer (#16401)
* fix external renderer
* use GBackground context as fallback
* no fallback, return error
Co-authored-by: Lauris BH <lauris@nix.lv>
* Add checkbox to delete pull branch after successful merge (#16049)
* Add checkbox to delete pull branch after successful merge
* Omit DeleteBranchAfterMerge field in json
* Log a warning instead of error when PR head branch deleted
* Add DefaultDeleteBranchAfterMerge to PullRequestConfig
* Add support for delete_branch_after_merge via API
* Fix for API: the branch should be deleted from the HEAD repo
If head and base repo are the same, reuse the already opened ctx.Repo.GitRepo
* Don't delegate to CleanupBranch, only reuse branch deletion code
CleanupBranch contains too much logic that has already been performed by the Merge
* Reuse gitrepo in MergePullRequest
Co-authored-by: Andrew Thornton <art27@cantab.net>
* [skip ci] Updated translations via Crowdin
* Detect encoding changes while parsing diff (#16330)
* Detect encoding changes while parsing diff
* Let branch/tag name be a valid ref to get CI status (#16400)
* fix #16384#
* refactor: move shared helper func to utils package
* extend Tests
* use ctx.Repo.GitRepo if not nil
* fix
* fix
* 企业微信webhook
* 企业微信webhook
* 企业微信webhook
* fix build
* fix build
* Apply suggestions from code review
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: myheavily <myheavily>
Co-authored-by: zhaoxin <gitea@fake.local>
Co-authored-by: Meano <Meano@foxmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: GiteaBot <teabot@gitea.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Bagas Sanjaya <bagasdotme@gmail.com>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Jimmy Praet <jimmy.praet@telenet.be>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Somewhere along the line the creation of git-daemon-export-ok
files disappeared but the updating of these files when
repo visibility changes remained. The problem is that the
current state will create files even when the org or user
is private.
This PR restores creation correctly.
Fix #15521
Signed-off-by: Andrew Thornton <art27@cantab.net>
One of the reasons why #16447 was needed and why #16268 was needed in
the first place was because it appears that editing ldap configuration
doesn't get tested.
This PR therefore adds a basic test that will run the edit pipeline.
In doing so it's now clear that #16447 and #16268 aren't actually
solving #16252. It turns out that what actually happens is that is that
the bytes are actually double encoded.
This PR now changes the json unmarshal wrapper to handle this double
encode.
Fix #16252
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
