This PR addresses an issue where logged-in users get redirected to the
homepage when trying to access a URL with the redirect_to parameter. The
issue was traced back to a middleware function in
services/auth/middleware.go that redirects logged-in users to the
homepage. This function didn't account the redirect_to parameter.
The fix modifies the middleware function to check for this case and
redirect the user to the specified URL instead of the homepage.
Closes: #26005
---------
Signed-off-by: cassiozareck <cassiomilczareck@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The JSONRedirect/JSONOK/JSONError functions were put into "Base" context
incorrectly, it would cause abuse.
Actually, they are for "web context" only, so, move them to the correct
place.
And by the way, use them to simplify old code: +75 -196
This PR includes #26007 's changes but have a UI to prompt administrator
about the deprecated settings as well as the log or console warning.
Then users will have enough time to notice the problem and don't have
surprise like before.
<img width="1293" alt="图片"
src="https://github.com/go-gitea/gitea/assets/81045/c33355f0-1ea7-4fb3-ad43-cd23cd15391d">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- cancel running jobs if the event is push
- Add a new function `CancelRunningJobs` to cancel all running jobs of a
run
- Update `FindRunOptions` struct to include `Ref` field and update its
condition in `toConds` function
- Implement auto cancellation of running jobs in the same workflow in
`notify` function
related task: https://github.com/go-gitea/gitea/pull/22751/
---------
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Signed-off-by: appleboy <appleboy.tw@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Close #24544
Changes:
- Create `action_tasks_version` table to store the latest version of
each scope (global, org and repo).
- When a job with the status of `waiting` is created, the tasks version
of the scopes it belongs to will increase.
- When the status of a job already in the database is updated to
`waiting`, the tasks version of the scopes it belongs to will increase.
- On Gitea side, in `FeatchTask()`, will try to query the
`action_tasks_version` record of the scope of the runner that call
`FetchTask()`. If the record does not exist, will insert a row. Then,
Gitea will compare the version passed from runner to Gitea with the
version in database, if inconsistent, try pick task. Gitea always
returns the latest version from database to the runner.
Related:
- Protocol: https://gitea.com/gitea/actions-proto-def/pulls/10
- Runner: https://gitea.com/gitea/act_runner/pulls/219
To avoid deadlock problem, almost database related functions should be
have ctx as the first parameter.
This PR do a refactor for some of these functions.
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Close #25906
Succeeded logs:
```
[I] router: completed GET /root/test/issues/posters?&q=%20&_=1689853025011 for [::1]:59271, 200 OK in 127.7ms @ repo/issue.go:3505(repo.IssuePosters)
[I] router: completed GET /root/test/pulls/posters?&q=%20&_=1689853968204 for [::1]:59269, 200 OK in 94.3ms @ repo/issue.go:3509(repo.PullPosters)
```
This change adds an entry to the `links` field of the
`/.well-known/webfinger` response. The new entry points to the `appURL`
as an OpenID issuer. This is consistent with the output of
`/.well-known/openid-configuration`, which also uses the value of
`appURL`.
This change is required for Tailscale SSO to work, as it uses the OpenID
Issuer URL when querying the Tailscale user email during signup/login
([docs](https://tailscale.com/kb/1240/sso-custom-oidc/#webfinger-setup)).
- Tell the renderer to use the `document` mode, so it's consistent with
other renderers.
- Use the same padding as `.file-view.markup`, so it's consistent with
other containers that contain markup rendering.
- Resolves https://codeberg.org/forgejo/forgejo/issues/833
Co-authored-by: Gusted <postmaster@gusted.xyz>
Bumping `github.com/golang-jwt/jwt` from v4 to v5.
`github.com/golang-jwt/jwt` v5 is bringing some breaking changes:
- standard `Valid()` method on claims is removed. It's replaced by
`ClaimsValidator` interface implementing `Validator()` method instead,
which is called after standard validation. Gitea doesn't seem to be
using this logic.
- `jwt.Token` has a field `Valid`, so it's checked in `ParseToken`
function in `services/auth/source/oauth2/token.go`
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Update WorkPath/WORK_PATH related documents, remove out-dated
information.
Remove "StaticRootPath" on the admin config display page, because few
end user really need it, it only causes misconfiguration.
Co-authored-by: Giteabot <teabot@gitea.io>
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
Issue filters are being used on repo list page and on milestone issues
page, and the code is mostly duplicated.
This PR does the following changes:
- move issue filters into a shared template
- allow filtering milestone issues by project, so no need to hide this
filter on milestone issues page
- remove some dead code (e. g. issue actions in milestone issues
template)
- fix label filter dropdown width
---------
Co-authored-by: 6543 <6543@obermui.de>
Before:
After:
This issue comes from the change in #25468.
`LoadProject` will always return at least one record, so we use
`ProjectID` to check whether an issue is linked to a project in the old
code.
As other `issue.LoadXXX` functions, we need to check the return value
from `xorm.Session.Get`.
In recent unit tests, we only test `issueList.LoadAttributes()` but
don't test `issue.LoadAttributes()`. So I added a new test for
`issue.LoadAttributes()` in this PR.
---------
Co-authored-by: Denys Konovalov <privat@denyskon.de>
Replace #25580
Fix #19453
The problem was: when users set "GITEA__XXX__YYY" , the "install page"
doesn't respect it.
So, to make the result consistent and avoid surprising end users, now
the "install page" also writes the environment variables to the config
file.
And, to make things clear, there are enough messages on the UI to tell
users what will happen.
There are some necessary/related changes to `environment-to-ini.go`:
* The "--clear" flag is removed and it was incorrectly written there.
The "clear" operation should be done if INSTALL_LOCK=true
* The "--prefix" flag is removed because it's never used, never
documented and it only causes inconsistent behavior.
Fix #25627
1. `ctx.Data["Link"]` should use relative URL but not AppURL
2. The `data-params` is incorrect because it doesn't contain "page". JS
can simply use "window.location.search" to construct the AJAX URL
3. The `data-xxx` and `id` in notification_subscriptions.tmpl were
copied&pasted, they don't have affect.
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003
Resolves #311
Resolves #13196
Resolves #23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
A couple of notes:
* Future changes should refactor arguments into a struct
* This filtering only is supported by meilisearch right now
* Issue index number is bumped which will cause a re-index
