- Currently if you want to update the milestone of an issue or pull
request, your whole page will be reloaded to reflect the newly set
milestone. This is quite unecessary, as only the milestone text is
updated and a new timeline event is added.
- This patch converts the milestone section in the issue/pull request
sidebar to use HTMX, so it becomes a progressive element and avoids
reloading the whole page to update the milestone.
- The update of the milestone section itself is quite straightforward
and nothing special is happening. To support adding new timeline events,
a new element `#insert-timeline` is conviently placed after the last
timeline event, which can be used with
[`hx-swap-oob`](https://htmx.org/attributes/hx-swap-oob/) to position
new timeline events before that element.
- Adds E2E test.
- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
Add an empty hash `href="#"` attribute to anchors that did not yet have any `href` attribute, as a quick work-around to make those elements possible to interact with via keyboard. See discussion on linked issue (https://codeberg.org/forgejo/forgejo/issues/4273) for more information on how the button-like elements like this could eventually be improved even more.
Fixes https://codeberg.org/forgejo/forgejo/issues/4273.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4375
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: banaanihillo <banaanihillo@noreply.codeberg.org>
Co-committed-by: banaanihillo <banaanihillo@noreply.codeberg.org>
It is entirely possible that the difference between the specified
sleep time and the actual sleep time is greater than 15 seconds.
https://developer.mozilla.org/en-US/docs/Web/API/setTimeout#Notes
> Note that in either case, the actual delay may be longer than
> intended; see Reasons for delays longer than specified below.
It is however an error for the delay to be shorter.
⎯⎯⎯⎯⎯⎯⎯ Failed Tests 1 ⎯⎯⎯⎯⎯⎯⎯
FAIL web_src/js/utils.test.js > sleep
AssertionError: expected false to be truthy
❯ testSleep web_src/js/utils.test.js:192:48
190| const endTime = Date.now(); // Record the end time
191| const actualSleepTime = endTime - startTime;
192| expect(Math.abs(actualSleepTime - ms) <= 15).toBeTruthy();
| ^
193| }
194|
❯ web_src/js/utils.test.js:184:3
We haven't decided much (to my knowledge), and I've been using the main branch in production (as one does) and found out even I myself rely on Tab sometimes working to move focus and have been caught off guard by it indenting lines instead.
So this removes Tab handling and instead adds two new buttons to the toolbar. The indentation logic is unchanged (other than now focusing the textarea during button handling, to ensure execCommand works, and thus undo history is preserved).
I'm not sure which terminology to use in tooltips. Could also add keyboard shortcuts for the whole toolbar eventually, but as is this is hopefully an better solution to the problems I previously created than un-merging the whole thing :)
<img width="414" alt="Screenshot with two new buttons" src="/attachments/b7af3aa4-a195-48d1-be0a-1559f25dce8e">
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4263
Reviewed-by: Otto <otto@codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
#4059 was unfortunately incomplete: some custom_url fields are currently shown, even if they are not used by the provider. Moreover the `Use Custom URLs Instead of Default URLs` is always checked by default.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `GitLab`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially unchecked**
- enable the `Use Custom URLs Instead of Default URLs` checkbox
- verify that only the fields "Authorize", "Token" and "Profile" URLs are shown (no "Email URL", nor "Tenant").
- Switch the `OAuth2 provider` to `Azure AD v2`
- verify that the `Use Custom URLs Instead of Default URLs` option is **initially checked**
- verify that only the field "Tenant" is shown (with the default "organizations").
Note: this is loosely based on the upstream fix https://github.com/go-gitea/gitea/pull/31246 which I initially overlooked.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4194
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
While trying to understand #1236, I was quite confused not to see the `Use Custom URLs` checkbox.
This checkbox disappeared in b95a893b22 (because `getElementById` does not expect a `#` as first char), fixed in 4e816e1326.
After solving this, switching from `Nextcloud` to `OpenID Connect` triggered a JS error, which is addressed in 3efa4d836a.
Manual testing:
- go to http://localhost:3000/admin/auths
- click on `Add authentication source`
- Choose `Authentication type`: `OAuth2`
- Choose `OAuth2 provider`: `Nextcloud`
- check that the `Use Custom URLs Instead of Default URLs` checkbox toggles the fields below
- let the checkbox be checked
- Switch the `OAuth2 provider` to `OpenID Connect`
- ensure that no JS error is shown
- Switch the `OAuth2 provider` to `Mastodon`
- check that the fields below `Use Custom URLs Instead of Default URLs` have the right defaults (mastodon.social)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4059
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: oliverpool <git@olivier.pfad.fr>
Co-committed-by: oliverpool <git@olivier.pfad.fr>
This removes the difference between high density images and other images regarding the pasting.
## Why
With this change, all images are clickable by default again. I don't think there is any problem regarding the img size because 1. it is the old behaviour, 2. the comment container already limits the size of the image.
## Alternatives
We can add an a-tag automatically when the user pastes an image. I do not prefer this because this adds a really long text (it's already bad with the img-tag) e.g.: `<a href="/attachments/28cf2254-13be-46c6-a433-efc77f556083" target="_blank"><img width="385" alt="grafik" src="/attachments/28cf2254-13be-46c6-a433-efc77f556083"></a>`
## Testing
1. Open an issue or pull request
2. Paste an image in the comment text box
3. The image should be pasted with valid Markdown syntax
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3965
Reviewed-by: twenty-panda <twenty-panda@noreply.codeberg.org>
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Beowulf <beowulf@beocode.eu>
Co-committed-by: Beowulf <beowulf@beocode.eu>
This overrides handling of Tab and Enter keys in the ComboMarkdownEditor, so that:
* Pressing Tab prepending 4 spaces to the line under cursor, or all the lines in the selection.
* Pressing Shift+Tab removes up to 4 spaces.
* Pressing Enter repeats any indentation and a "repeatable" prefix (list or blockquote) from the current line.
Since Tab "capture" can interfere with keyboard navigation, it's only done if there was any previous input in the textarea or if it was selected with a pointer. Additionally, presing Esc will make the textarea lose focus, resuming tab navigation. This seems adequate to me, but I might be wrong.
Had to use the "deprecated" execCommand method, since anything else I tried messes up the undo history. There's a fallback for when (if?) it's actually removed.
Only tested in desktop Firefox and Chrome so far.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/4072
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Beowulf <beowulf@noreply.codeberg.org>
Co-authored-by: Danko Aleksejevs <danko@very.lv>
Co-committed-by: Danko Aleksejevs <danko@very.lv>
When a comment was added and saved with the preview tab active, the
preview tab is still active, when the comment is edited again.
This adds a "hacky" solution, but it works and is simple.
Every time the edit is "started" and the editor already exists, the tab
with the edit text field gets clicked to activate it.
Fixes #1334
fixes #22907
Tested:
- [x] issue content edit
- [x] issue content change tasklist
- [x] pull request content edit
- [x] pull request change tasklist
(cherry picked from commit aa92b13164e84c26be91153b6022220ce0a27720)
Conflicts:
models/issues/comment.go
c7a389f2b2 [FEAT] allow setting the update date on issues and comments
options/locale/locale_en-US.ini
trivial context conflicts
routers/api/v1/repo/issue_comment.go
routers/api/v1/repo/issue_comment_attachment.go
services/issue/comments.go
services/issue/content.go
user blocking is implemented differently in Forgejo
routers/web/repo/issue.go
trivial difference from 6a0750177f Allow to save empty comment
user blocking is implemented differently in Forgejo
templates/repo/issue/view_content/conversation.tmpl
templates changed a lot in Forgejo but the change is
trivially ported
tests/integration/issue_test.go
other tests were added in the same region
web_src/js/features/repo-issue-edit.js
the code is still web_src/js/features/repo-legacy.js
trivially ported
This PR ports [gitea#30858](https://github.com/go-gitea/gitea/pull/30858) / [this commit](5c236bd4c0) to forgejo.
[week 2024-20 cherry pick](https://codeberg.org/forgejo/forgejo/pulls/3729)
## Tests
- [ ] Click "edit" to get into edit mode, change the title and then use Alt+Enter to save the title
## Screenshots
Before:
After:
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3797
Reviewed-by: 0ko <0ko@noreply.codeberg.org>
Co-authored-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Co-committed-by: Mai-Lapyst <mai-lapyst@noreply.codeberg.org>
Fix #3638
This is a manual Forgejo-specific version of the Gitea PR https://github.com/go-gitea/gitea/pull/30862. The weekly Forgejo PR #3772 could not cherry-pick this commit due to conflicts (eg subsequent CodeSpell changes).
Only occurs with Webkit in Safari over eg `http://192..`. (not localhost).
See https://webkit.org/blog/10855/async-clipboard-api/
---
**Before**
**After**
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3805
Reviewed-by: Otto <otto@codeberg.org>
Co-authored-by: David Davies-Payne <d2p@me.com>
Co-committed-by: David Davies-Payne <d2p@me.com>
The previous implementation will start multiple POST requests from the
frontend when moving a column and another bug is moving the default
column will never be remembered in fact.
- [x] This PR will allow the default column to move to a non-first
position
- [x] And it also uses one request instead of multiple requests when
moving the columns
- [x] Use a star instead of a pin as the icon for setting the default
column action
- [x] Inserted new column will be append to the end
- [x] Fix #30701 the newly added issue will be append to the end of the
default column
- [x] Fix when deleting a column, all issues in it will be displayed
from UI but database records exist.
- [x] Add a limitation for columns in a project to 20. So the sorting
will not be overflow because it's int8.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit a303c973e0264dab45a787c4afa200e183e0d953)
Conflicts:
routers/web/web.go
e91733468ef726fc9365aa4820cdd5f2ddfdaa23 Add missing database transaction for new issue (#29490) was not cherry-picked
services/issue/issue.go
fe6792dff3 Enable/disable owner and repo projects independently (#28805) was not cherry-picked
Before this patch, we were using `Date` getter/setter methods that
worked with local time to get a list of Sundays that are in the range of
some start date and end date. The problem with this was that the Sundays
are in Unix epoch time and when we changed the "startDate" argument that
was passed to make sure it is on a Sunday, this change would be
reflected when we convert it to Unix epoch time. More specifically, I
observed that we may get different Unix epochs depending on your
timezone when the returned list should rather be timezone-agnostic.
This led to issues in US timezones that caused the contributor, code
frequency, and recent commit charts to not show any chart data. This fix
resolves this by using getter/setter methods that work with UTC since it
isn't dependent on timezones.
Fixes #30851.
---------
Co-authored-by: Sam Fisher <fisher@3echelon.local>
(cherry picked from commit 22c7b3a74459833b86783e84d4708c8934d34e58)
Regression of #29920
Fixes: #30569
Also this is a rewriting to eliminate the remaining jQuery usages from code.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit d0e07083559180b124a08359fcc72f9ef695e723)
Conflicts:
- web_src/js/features/repo-common.js
Conflict resolved in favour of Gitea.
More about codespell: https://github.com/codespell-project/codespell .
I personally introduced it to dozens if not hundreds of projects already and so far only positive feedback.
```
❯ grep lint-spell Makefile
@echo " - lint-spell lint spelling"
@echo " - lint-spell-fix lint spelling and fix issues"
lint: lint-frontend lint-backend lint-spell
lint-fix: lint-frontend-fix lint-backend-fix lint-spell-fix
.PHONY: lint-spell
lint-spell: lint-codespell
.PHONY: lint-spell-fix
lint-spell-fix: lint-codespell-fix
❯ git grep lint- -- .forgejo/
.forgejo/workflows/testing.yml: - run: make --always-make -j$(nproc) lint-backend checks-backend # ensure the "go-licenses" make target runs
.forgejo/workflows/testing.yml: - run: make lint-frontend
```
so how would you like me to invoke `lint-codespell` on CI? (without that would be IMHO very suboptimal and let typos sneak in)
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3270
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Yaroslav Halchenko <debian@onerussian.com>
Co-committed-by: Yaroslav Halchenko <debian@onerussian.com>
This fixes `initRepoPullRequestAllowMaintainerEdit()` to submit the form correctly (as a web form, rather than as JSON payload).
Fixes #3618, cherry picked from gitea#30854.
Co-Authored-By: wxiaoguang <wxiaoguang@gmail.com>
---
Manual testing steps:
- Open a PR against any repository, with the "Allow edits from maintainers" option checked.
- Open the developer console (`Ctrl-Shift-I` on Firefox), and look at the Network tab.
- Visit the PR, find the "Allow edits from maintainers" checkbox, and click it.
- See the developer console, and check that the response says the setting is false.
- Refresh the page *completely* (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is off.
- Click the box again to enable it.
- See the developer console, and check that the response says the setting is true.
- Reload without cache again (`Ctrl-Shift-R` on Firefox)
- Observe that the setting is now on.
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/3675
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Co-authored-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Co-committed-by: Gergely Nagy <forgejo@gergo.csillger.hu>
This will move the settings button back to the right, like known from
older versions.
For this, the overflow-menu was changed when a setting button is
available. If no settings button is available, the behavior will not
change.
Fixes #3301
The WIP prefix toggling link on the sidebar only supported toggling
the *first* prefix specified in
`[repository.pullrequest].WORK_IN_PROGRESS_PREFIXES`. If the pull
request had a title with any other prefix, the first prefix listed in
the config was added (and then removed on toggling it off).
This little change makes all of the prefixes available for the
JavaScript function that does the toggling, and changes said function to
find the used prefix first, and toggle that.
When adding the prefix, it will still default to adding the first one
listed in the configuration, but it will happily remove any others if
those are present.
Fixes #3377.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
Fixes: https://github.com/go-gitea/gitea/issues/30384
On repo settings page, there id `repo_name` was used 5 times on the same
page, some in modal and such. I think we are better off just
auto-generating these IDs in the future so that labels link up with
their form element.
Ideally this id generation would be done in backend in a subtemplate,
but seeing that we already have similar JS patches for checkboxes, I
took the easy path for now.
I also checked that these `#repo_name` were not in use in JS and the
only case where this id appears in JS is on the migration page where
it's still there.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit d4ec6b3d16496ce3b479d5a08f79823122dc2b7b)
Conflicts:
- templates/repo/settings/options.tmpl
Conflict resolved by manually removing all `id` and `for`
attributes from elements that had `repo_name` as their id.
Fixes https://github.com/go-gitea/gitea/issues/28114 and behaviour
matches vscode on desktop as well.
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 49b80f8ac1cf9f0b56da0c73d0f34ef030f4c447)
- Add another selector to the list, which corresponds to the container
of the archive buttons on the release page of an repository.
- Seems like that 8d2b764607 missed
another case.
- Resolves #3180
- Switched to plain JavaScript
- Tested the commit graph and it works as before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 25427e0aee435cdedb9f8aae58767174d877767f)
Fix the action issue in https://github.com/go-gitea/gitea/issues/30303,
specifically:
- Use opaque step header hover background to avoid transparency issue
- Un-sticky the `action-view-left` on mobile, it would otherwise overlap
into right view
- Improve commit summary, let it wrap
- Fix and comment z-indexes
- Tweak width for run-list-item-right so it wastes less space on desktop
- Synced latest changes to console colors from dark to light theme
<img width="467" alt="Screenshot 2024-04-06 at 18 58 15"
src="https://github.com/go-gitea/gitea/assets/115237/8ad26b72-6cd9-4522-8ad1-6fd86b2d0d53">
(cherry picked from commit 0178eaec256a349371c75e582edd7fefca2085d0)
1. The previous color contrast calculation function was incorrect at
least for the `#84b6eb` where it output low-contrast white instead of
black. I've rewritten these functions now to accept hex colors and to
match GitHub's calculation and to output pure white/black for maximum
contrast. Before and after:
<img width="94" alt="Screenshot 2024-04-02 at 01 53 46"
src="https://github.com/go-gitea/gitea/assets/115237/00b39e15-a377-4458-95cf-ceec74b78228"><img
width="90" alt="Screenshot 2024-04-02 at 01 51 30"
src="https://github.com/go-gitea/gitea/assets/115237/1677067a-8d8f-47eb-82c0-76330deeb775">
2. Fix project-related issues:
- Expose the new `ContrastColor` function as template helper and use it
for project cards, replacing the previous JS solution which eliminates a
flash of wrong color on page load.
- Fix a bug where if editing a project title, the counter would get
lost.
- Move `rgbToHex` function to color utils.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
---
Conflict resolution: Trivial.
(cherry picked from commit 36887ed3921d03f1864360c95bd2ecf853bfbe72)
Another pure CSS module. Some styling is part of the `form` module which
will likely follow next.
(cherry picked from commit ff334749f58c71980ec19143bc21c0a799074b30)
Conflicts:
- web_src/js/components/DashboardRepoList.vue
Resolved the conflict by manually applying the Gitea change.
Fix https://github.com/go-gitea/gitea/issues/30185, regression from
https://github.com/go-gitea/gitea/pull/30162.
The checkboxes were unclickable because the label was positioned over
the checkbox with `padding`. Now it uses `margin` so the checkbox itself
will be clickable in all cases.
Secondly, I changed the for/id linking to also add missing `for`
attributes when `id` is present. The other way around (only `for`
present) is currently not handled and I think there are likey no
occurences in the code and introducing new non-generated `id`s might
cause problems elsewhere if we do, so I skipped on that.
(cherry picked from commit 640850e15f56bbe01f5d8ea407f99c79dc38457e)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the issue author dropdown functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 72a5d3faa8b65042a4fc7525d511d8942a47dafe)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the comment edit history functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 6aeff21b76fcbb10d5ce9009ed4243c14633d899)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the repository branch settings functionality and it works as
before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 2b3f7d3e966ab60cb147115303d1992e8b50d4df)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the edit column modal functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit b535c6ca7b9e8c4bcf5637091ee5ad6d9c807c31)
- Switched from jQuery class functions to plain JavaScript
- Tested the comment context menu functionality and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit 66f7d47d2c702bab4ca9bcedc1c0ba9ddfa49a17)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the commit button disabled toggling functionality and it works
as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 42870cf40278e84024ccea41368312451f79a4d6)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the diff view functionality and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit c487a32bcd093affe3284282ea279d97f52a867f)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the notification count and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 56ac5f18e8022242316d86c8f3091bce554faebb)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the code range selection functionality and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 911993429f3bec0ff4440c012b2a8f295673f961)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the image diff and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit 849eee8db70c8999d54350b85ea7a16fc44dc404)
Get rid of one more jQuery dependant and have a nicer color picker as
well.
Now there is only a single global color picker init because that is all
that's necessary because the elements are present on the page when the
init code runs. The init is slightly weird because the module only takes
a selector instead of DOM elements directly.
The label modals now also perform form validation because previously it
was possible to trigger a 500 error `Color cannot be empty.` by clearing
out the color value on labels.
<img width="867" alt="Screenshot 2024-03-25 at 00 21 05"
src="https://github.com/go-gitea/gitea/assets/115237/71215c39-abb1-4881-b5c1-9954b4a89adb">
<img width="860" alt="Screenshot 2024-03-25 at 00 20 48"
src="https://github.com/go-gitea/gitea/assets/115237/a12cb68f-c38b-4433-ba05-53bbb4b1023e">
(cherry picked from commit dd8dde2be89921b2b1497c6cc5eafdde213429cb)
Simplify code and use `.files` elements
(cherry picked from commit ca297a90fb1fec5b270fad1a3e575916510e7385)
Conflicts:
web_src/js/features/repo-legacy.js
- Currently emojis that are part of the label's name aren't rendered
when shown in the popup that you get when you hover over issue
references.
- This patch fixes that by rendering the emoji.
- Adds CSS to not make the emoji big in the label.
- Resolves #1531
- Switched to plain JavaScript
- Tested the form and it works as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
(cherry picked from commit a8748eedae3518550bd43fd592d206df2bea6bef)
Conflicts:
web_src/js/features/admin/users.js
prefer Gitea version and discard jQuery specific fixes from
Forbid jQuery `.prop` and fix related issues (#29832)
Enable us to use tailwind's
[`font-family`](https://tailwindcss.com/docs/font-family) classes as
well as remove `gt-mono` in favor of `tw-font-mono`. I also merged the
"compensation" to one selector, previously this was two different values
0.9em and 0.95em. I did not declare a `serif` font because I don't think
there will ever be a use case for those. Command ran:
```sh
perl -p -i -e 's#gt-mono#tw-font-mono#g' web_src/js/**/* templates/**/*
(cherry picked from commit 226a82a9396dc94f362ba27bd1c9318630df74b4)
On creation of an empty project (no template) a default board will be
created instead of falling back to the uneditable pseudo-board.
Every project now has to have exactly one default boards. As a
consequence, you cannot unset a board as default, instead you have to
set another board as default. Existing projects will be modified using a
cron job, additionally this check will run every midnight by default.
Deleting the default board is not allowed, you have to set another board
as default to do it.
Fixes #29873
Fixes #14679 along the way
Fixes #29853
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit e5160185ed65fd1c2bcb2fc7dc7e0b5514ddb299)
Conflicts:
options/locale/locale_en-US.ini
trivial conflict because Forgejo strings do not have
surrounding double quotes
Fixes https://github.com/go-gitea/gitea/issues/30143, regression from
https://github.com/go-gitea/gitea/pull/29920.
We have `.button` on the repo page, but on the branch page it's a
`.btn`. Eventually we should find a solution to have a single button
class but until then this solution should be acceptable.
(cherry picked from commit c85619b82d19a928cb219eba3f38473928b29b0c)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the new authentication source form and the deletion of system
notices. They work as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 1551d73d3f95284965675b828e1eeceafa378437)
- Switched from jQuery class functions to plain JavaScript `classList`
- Tested the reaction selector and it works as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 1a71dbfb7881f65d39b689a5be26cc94afefb10f)
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested the dropdowns and they work as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 0922ce8191ae83834b89b59c5c504209a8a0558e)
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested most of the functions and they work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit a190f68f1bf92554923a4adde50e5cbc637a2a2e)
- Switched to plain JavaScript
- Tested the create/rename branch modals' functionality and they work as
before
# Demo using JavaScript without jQuery
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 4efe7884a3c99235b39998472ea430bffe0799e5)
Fix mistake from https://github.com/go-gitea/gitea/pull/29977 where the
click handler wasn't updated for the change with the `isExpandable`
function.
(cherry picked from commit 57539bcdc024110c890320e3e785bf3d6ad6df55)
- Switched from jQuery `attr` to plain javascript `setAttribute`
- Tested the modals and they work as before
---------
Co-authored-by: silverwind <me@silverwind.io>
(cherry picked from commit f47e00d9d3c3bd58b5944a29c4ff5cec0357520a)
- Switched from jQuery `attr` to plain javascript `getAttribute`
- Tested the code comments and they work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
(cherry picked from commit 5687aca4fc9aef44e1fb5af655b2320d18583dbd)
There's no need to initialize a jQuery object with a CSS selector when
we can pass the CSS selector directly.
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit a1f11e2e33f20409eac65b2d0e9a7cd7c767eb72)
- Switched from jQuery `attr` to plain javascript `getAttribute` and
`setAttribute`
- Tested most of the functions and they work as before
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit e0b018706fa7703ef1759d9a75a1399383715808)
