* Add register manual confirm settings option
The new settings option is used when manually approving new
registrations.
* Enable manual confirmation of new registered user
When manual registration confirmation is desired (by default `false`)
create new user in the database that is *not active*. The user must then
be activated manually.
This change speeds up the process of adding new confirmed users for
Gitea instances without external auth mechanism. (Currently the option
is to manually create new user by admin.)
* Update docs/content/doc/advanced/config-cheat-sheet.zh-cn.md
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Store repository data in data path if not previously set
* update docs
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: silverwind <me@silverwind.io>
* update docs
Co-authored-by: silverwind <me@silverwind.io>
I think it's a bad default to have "dev" as the default run mode which
enables debugging and now also disables HTTP caching. It's better to
just default to a value suitable for general deployments.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This enabled HTTP time-based cache for storage assets, primarily
avatars. I have not observed If-Modified-Since from browsers during
tests but I guess it's good to support regardless.
It introduces a new generic httpcache module that can handle both
time-based and etag-based caching.
Additionally, manifest.json and robots.txt are now also cachable.
* Clarify app.example.ini documentation
Hard to understand if cron i needed to activate all other cron.
* Added missing "Extended cron tasks" to config-cheat-sheet.en-us.md
cron default is false - setting it true activates all cron. Changed the documentation accordingly
* Fixed spelling
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add ssh certificate support
* Add ssh certificate support to builtin ssh
* Write trusted-user-ca-keys.pem based on configuration
* Update app.example.ini
* Update templates/user/settings/keys_principal.tmpl
Co-authored-by: silverwind <me@silverwind.io>
* Remove unused locale string
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update options/locale/locale_en-US.ini
Co-authored-by: silverwind <me@silverwind.io>
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* Add missing creation of SSH.Rootpath
* Update cheatsheet, example and locale strings
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
Co-authored-by: zeripath <art27@cantab.net>
* Update models/ssh_key.go
* Optimizations based on feedback
* Validate CA keys for external sshd
* Add filename option and change default filename
Add a SSH_TRUSTED_USER_CA_KEYS_FILENAME option which default is
RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem
Do not write a file when SSH_TRUSTED_USER_CA_KEYS is empty.
Add some more documentation.
* Remove unneeded principalkey functions
* Add blank line
* Apply suggestions from code review
Co-authored-by: zeripath <art27@cantab.net>
* Add SSH_AUTHORIZED_PRINCIPALS_ALLOW option
This adds a SSH_AUTHORIZED_PRINCIPALS_ALLOW which is default
email,username this means that users only can add the principals
that match their email or username.
To allow anything the admin need to set the option anything.
This allows for a safe default in gitea which protects against malicious
users using other user's prinicipals. (before that user could set it).
This commit also has some small other fixes from the last code review.
* Rewrite principal keys file on user deletion
* Use correct rewrite method
* Set correct AuthorizedPrincipalsBackup default setting
* Rewrite principalsfile when adding principals
* Add update authorized_principals option to admin dashboard
* Handle non-primary emails
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add the command actually to the dashboard template
* Update models/ssh_key.go
Co-authored-by: silverwind <me@silverwind.io>
* By default do not show principal options unless there are CA keys set or they are explicitly set
Signed-off-by: Andrew Thornton <art27@cantab.net>
* allow settings when enabled
* Fix typos in TrustedUserCAKeys path
* Allow every CASignatureAlgorithms algorithm
As this depends on the content of TrustedUserCAKeys we should allow all
signature algorithms as admins can choose the specific algorithm on their
signing CA
* Update models/ssh_key.go
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fix linting issue
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <matti@mdranta.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Disable DSA ssh keys by default
OpenSSH has disabled DSA keys since version 7.0
As the docker runs openssh > v7.0 we should just disable
DSA keys by default.
Refers to #11417
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Just disable DSA keys by default
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Appears we need to set the minimum key sizes too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove DSA type
* Fix Tests
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Extend git hook warning in the UI.
Git hooks are a dangerous feature, administrators should be warned before giving
the git hook privilege to users.
* Disable Git hooks by default and add warning.
Git hooks are a dangerous features (see warning text) that should only
be enabled if the administrator was informed about the risk involved.
Co-authored-by: Niklas Goerke <goerke@fzi.de>
* Allow common redis and leveldb connections
Prevents multiple reopening of redis and leveldb connections to the same
place by sharing connections.
Further allows for more configurable redis connection type using the
redisURI and a leveldbURI scheme.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add unit-test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/cache/cache_redis.go
* Update modules/queue/queue_disk.go
* Update modules/cache/cache_redis.go
* Update modules/cache/cache_redis.go
* Update modules/queue/unique_queue_disk.go
* Update modules/queue/queue_disk.go
* Update modules/queue/unique_queue_disk.go
* Update modules/session/redis.go
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Don't automatically delete repository files if they are present
Prior to this PR Gitea would delete any repository files if they are
present during creation or migration. This can in certain circumstances
lead to data-loss and is slightly unpleasant.
This PR provides a mechanism for Gitea to adopt repositories on creation
and otherwise requires an explicit flag for deletion.
PushCreate is slightly different - the create will cause adoption if
that is allowed otherwise it will delete the data if that is allowed.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix tests and migrate overwrite
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @lunny
Only offer to adopt or overwrite if the user can do that.
Allow the site administrator to adopt or overwrite in all
circumstances
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use setting.Repository.DefaultBranch for the default branch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Always set setting.Repository.DefaultBranch
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* update templates
Signed-off-by: Andrew Thornton <art27@cantab.net>
* ensure repo closed
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Rewrite of adoption as per @6543 and @lunny
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
* update swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* missing not
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add modals and flash reporting
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make the unadopted page searchable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add API
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Handle empty and non-master branched repositories
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove commented out code
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add configurable Trust Models
Gitea's default signature verification model differs from GitHub. GitHub
uses signatures to verify that the committer is who they say they are -
meaning that when GitHub makes a signed commit it must be the committer.
The GitHub model prevents re-publishing of commits after revocation of a
key and prevents re-signing of other people's commits to create a
completely trusted repository signed by one key or a set of trusted
keys.
The default behaviour of Gitea in contrast is to always display the
avatar and information related to a signature. This allows signatures to
be decoupled from the committer. That being said, allowing arbitary
users to present other peoples commits as theirs is not necessarily
desired therefore we have a trust model whereby signatures from
collaborators are marked trusted, signatures matching the commit line
are marked untrusted and signatures that match a user in the db but not
the committer line are marked unmatched.
The problem with this model is that this conflicts with Github therefore
we need to provide an option to allow users to choose the Github model
should they wish to.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Adjust locale strings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @6543
Co-authored-by: 6543 <6543@obermui.de>
* Update models/gpg_key.go
* Add migration for repository
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Restrict TLS connections to 1.2 minimum
* Set Argon2 as the default KDF
* Fix user.yml
* Remove TLS minversion changes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add migration as per @techknowlogick
Signed-off-by: Andrew Thornton <art27@cantab.net>
* set the password algo in the fixtures
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove the v148 migration - it needs recreate table to change the defaults
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Nadim Kobeissi <nadim@symbolic.software>
* Support elastic search for code search
* Finished elastic search implementation and add some tests
* Enable test on drone and added docs
* Add new fields to elastic search
* Fix bug
* remove unused changes
* Use indexer alias to keep the gitea indexer version
* Improve codes
* Some code improvements
* The real indexer name changed to xxx.v1
Co-authored-by: zeripath <art27@cantab.net>
* Update JWT docs in example config
align with way we have `LFS_JWT_SECRET` in config
Fix #12590
* Update custom/conf/app.example.ini
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Disable password complexity check default
These features enourange bad passwords/are annoying for people using better password methods, and at minimum we shouldn't force that as a default for obvious reasons. Disable any default check to avoid regular complaints.
* fix copy paste format
* Add a storage layer for attachments
* Fix some bug
* fix test
* Fix copyright head and lint
* Fix bug
* Add setting for minio and flags for migrate-storage
* Add documents
* fix lint
* Add test for minio store type on attachments
* fix test
* fix test
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add warning when storage migrated successfully
* Fix drone
* fix test
* rebase
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* remove log on xorm
* Fi download bug
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* refactor the codes
* add trace
* Fix test
* Add URL function to serve attachments directly from S3/Minio
* Add ability to enable/disable redirection in attachment configuration
* Fix typo
* Add a storage layer for attachments
* Add setting for minio and flags for migrate-storage
* fix lint
* Add test for minio store type on attachments
* Apply suggestions from code review
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix drone
* fix test
* Fix test
* display the error on console
* Move minio test to amd64 since minio docker don't support arm64
* don't change unrelated files
* Fix lint
* Fix build
* update go.mod and go.sum
* Use github.com/minio/minio-go/v6
* Remove unused function
* Upgrade minio to v7 and some other improvements
* fix lint
* Fix go mod
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: Tyler <tystuyfzand@gmail.com>
* Clarify documentation of SKIP_VERIFY
The documentation clearly documents the empty value as the default,
however at least one user reported this as being unclear. Mark values
explicitly so it is clear what values it can take. This clarifies that
an empty value in fact leaves certificate verification enabled, whereas
it has to be explicitly set to true to disable certificate verification.
Resolves: #12117
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Update custom/conf/app.example.ini
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
* Update custom/conf/app.example.ini
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: mrsdizzie <info@mrsdizzie.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Move EventSource to use a SharedWorker. This prevents issues with HTTP/1.1
open browser connections from preventing gitea from opening multiple tabs.
Also allow setting EVENT_SOURCE_UPDATE_TIME to disable EventSource updating
Fix #11978
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Rename custom/conf/app.ini.sample to custom/conf/app.sample.ini for better syntax light on editor
* rename to app.example.ini
* per @6543 's comment, update all references on docs
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This removes the jQuery plugin as well as the associated config options.
Native input[type=date] does not require a language attribute as it is
localized by default, except for the placeholder attribute for which I
currently piggy-back the repo.issues.due_date_form localization option.
Implementation should pretty much match GH. Of note is that Safari does
not provide a UI for this input type, but I don't think providing one is
neccessary and GH did not bother either.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Allow site admin to disable mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* No need to run through Safe
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Clarify only disabling NEW mirrors
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Apply suggestions from @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Fix chardet test and add ordering option
Signed-off-by: Andrew Thornton <art27@cantab.net>
* minor fixes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove log
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove log2
Signed-off-by: Andrew Thornton <art27@cantab.net>
* only iterate through top results
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update docs/content/doc/advanced/config-cheat-sheet.en-us.md
* slight restructure of for loop
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add warning to mailer documentation about authentication
References #7966
Signed-off-by: Andrew Thornton <art27@cantab.net>
* As per @guillep2k and @mrsdizzie
* as per @mrsdizzie
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
GH has different HardBreaks behaviour for markdown comments and documents.
Comments have hard breaks and documents have soft breaks - therefore Gitea's rendering will always be different from GH's if we only provide one setting.
Here we split the setting in to two - one for documents and one for comments and other things.
Signed-off-by: Andrew Thornton art27@cantab.net
Changes to index.js as per @silverwind
Co-authored-by: silverwind <me@silverwind.io>
Changes to docs as per @guillep2k
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Switch code editor to Monaco
This switches out CodeMirror for Monaco which is based on the same code
base as VS code and should work pretty similar to it.
It does add a few async chunks, totalling around 10MB to our build. It
currently supports around 65 languages and in the default configuration,
each language would emit one ugly [number].js chunk, so I opted to
combine them all into a single file for now.
CodeMirror is still being used under the hood by SimpleMDE so it can not
be removed yet.
* inline editorconfig, fix diff, use for markdown, remove more dead code
* refactors, remove jquery usage
* use tab_width
* fix intellisense
* rename function for clarity
* misc tweaks, enable webpack progress display
* only use --progress on dev build
* remove useless borders in arc-green
* fix typo
* remove obsolete comment
* small refactor
* fix file creation and various refactors
* unset useTabStops too when no editorconfig
* small refactor
* disable webpack's [big] warnings
* remove useless await
* fix dark theme check
* rename chunk to 'monaco'
* add to .gitignore and delete webpack dest before build
* increase editor height
* support more editorconfig properties
* remove empty element filter
* rename
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
* Make sure that sendmail processes register with the process manager
* Provide a timeout for these (initially of 5 minutes)
* Add configurable value and tie in to documentation
* Tie in to the admin config page.
Signed-off-by: Andrew Thornton <art27@cantab.net>
In #9888, it was reported that my earlier pull request #9075 didn't quite function as expected. I was quite hopeful the `ValuesWithShadow()` worked as expected (and, I thought my testing showed it did) but I guess not. @zeripath proposed an alternative syntax which I like:
```ini
[markup.sanitizer.1]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
[markup.sanitizer.2]
ELEMENT=a
ALLOW_ATTR=target
REGEXP=something
```
This was quite easy to adopt into the existing code. I've done so in a semi-backwards-compatible manner:
- The value from `.Value()` is used for each element.
- We parse `[markup.sanitizer]` and all `[markup.sanitizer.*]` sections and add them as rules.
This means that existing configs will load one rule (not all rules). It also means people can use string identifiers (`[markup.sanitiser.KaTeX]`) if they prefer, instead of numbered ones.
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Support unicode emojis and remove emojify.js
This PR replaces all use of emojify.js and adds unicode emoji support to various areas of gitea.
This works in a few ways:
First it adds emoji parsing support into gitea itself. This allows us to
* Render emojis from valid alias (😄)
* Detect unicode emojis and let us put them in their own class with proper aria-labels and styling
* Easily allow for custom "emoji"
* Support all emoji rendering and features without javascript
* Uses plain unicode and lets the system render in appropriate emoji font
* Doesn't leave us relying on external sources for updates/fixes/features
That same list of emoji is also used to create a json file which replaces the part of emojify.js that populates the emoji search tribute. This file is about 35KB with GZIP turned on and I've set it to load after the page renders to not hinder page load time (and this removes loading emojify.js also)
For custom "emoji" it uses a pretty simple scheme of just looking for /emojis/img/name.png where name is something a user has put in the "allowed reactions" setting we already have. The gitea reaction that was previously hard coded into a forked copy of emojify.js is included and works as a custom reaction under this method.
The emoji data sourced here is from https://github.com/github/gemoji which is the gem library Github uses for their emoji rendering (and a data source for other sites). So we should be able to easily render any emoji and :alias: that Github can, removing any errors from migrated content. They also update it as well, so we can sync when there are new unicode emoji lists released.
I've included a slimmed down and slightly modified forked copy of https://github.com/knq/emoji to make up our own emoji module. The code is pretty straight forward and again allows us to have a lot of flexibility in what happens.
I had seen a few comments about performance in some of the other threads if we render this ourselves, but there doesn't seem to be any issue here. In a test it can parse, convert, and render 1,000 emojis inside of a large markdown table in about 100ms on my laptop (which is many more emojis than will ever be in any normal issue). This also prevents any flickering and other weirdness from using javascript to render some things while using go for others.
Not included here are image fall back URLS. I don't really think they are necessary for anything new being written in 2020. However, managing the emoji ourselves would allow us to add these as a feature later on if it seems necessary.
Fixes: https://github.com/go-gitea/gitea/issues/9182
Fixes: https://github.com/go-gitea/gitea/issues/8974
Fixes: https://github.com/go-gitea/gitea/issues/8953
Fixes: https://github.com/go-gitea/gitea/issues/6628
Fixes: https://github.com/go-gitea/gitea/issues/5130
* add new shared function emojiHTML
* don't increase emoji size in issue title
* Update templates/repo/issue/view_content/add_reaction.tmpl
Co-Authored-By: 6543 <6543@obermui.de>
* Support for emoji rendering in various templates
* Render code and review comments as they should be
* Better way to handle mail subjects
* insert unicode from tribute selection
* Add template helper for plain text when needed
* Use existing replace function I forgot about
* Don't include emoji greater than Unicode Version 12
Only include emoji and aliases in JSON
* Update build/generate-emoji.go
* Tweak regex slightly to really match everything including random invisible characters. Run tests for every emoji we have
* final updates
* code review
* code review
* hard code gitea custom emoji to match previous behavior
* Update .eslintrc
Co-Authored-By: silverwind <me@silverwind.io>
* disable preempt
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Use AJAX for notifications table
Signed-off-by: Andrew Thornton <art27@cantab.net>
* move to separate js
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate golangci-lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add autoupdating notification count
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix wipeall
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Try hide and hidden
Signed-off-by: Andrew Thornton <art27@cantab.net>
* More auto-update improvements
Only run checker on pages that have a count
Change starting checker to 10s with a back-off to 60s if there is no change
Signed-off-by: Andrew Thornton <art27@cantab.net>
* string comparison!
Signed-off-by: Andrew Thornton <art27@cantab.net>
* as per @silverwind
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add configurability as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add documentation as per @6543
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use CSRF header not query
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Further JS improvements
Fix @etzelia update notification table request
Fix @silverwind comments
Co-Authored-By: silverwind <me@silverwind.io>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Simplify the notification count fns
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
Some OAuth2 providers return quite large structured tokens >32767 bytes.
Gitea currently has a fixed maximum of 32767 bytes for these and
unfortunately due to the convoluted nature of the dependent libraries the
error returned is rather opaque.
Here we manage the error a little better - detecting the rather opaque
github.com/gorilla/securecookie.errEncodedValueTooLong and converting
it to a more readable error.
Further we provide a configurable option to increase the maximum size of
the provided OAuth2 tokens.
Fix #9907
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Across several files, references to cron.update_migration_post_id are made, although the actual setting is called cron.update_migration_poster_id according to modules/setting/cron.go (10e2f29144/modules/setting/cron.go (L54)).
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
* Add more logging in the LFS server
Adds more logging in the LFS server and stops sending internal server
error information to the client
* Add LFS Lock cursor implementation
* Simplify Claims in LFS and remove the float64 casts
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Prevent Firefox from using apple-touch-icon
The opaque background does not work well in Firefox which uses the icon
as a "rich icon". Prevent this by not specifying it in HTML. Real Apple
devices will still request the icon on the static path.
Fixes: https://github.com/go-gitea/gitea/issues/10394
Also adjust gitignore so app.ini.sample becomes searchable and fixed a
variable name in app.ini.sample.
* fix gitignore
* Cache last commit to accelerate the repository directory page visit
* Default use default cache configuration
* add tests for last commit cache
* Simplify last commit cache
* Revert Enabled back
* Change the last commit cache default ttl to 8760h
* Fix test
* Add support for database schema
* Require setting search_path for the db user
* Add schema setting to admin/config.tmpl
* Use a schema different from default for psql tests
* Update postgres scripts to use custom schema
* Update to xorm/core 0.7.3 and xorm/xorm c37aff9b3a
* Fix migration test
Co-authored-by: Antoine GIRARD <sapk@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Make CertFile and KeyFile relative to CustomPath
The current code will absolute CertFile and KeyFile against the current working directory. This is quite unexpected for users. This code makes relative paths absolute against the CustomPath.
Fix #4196
* Improve error reporting when reading certificates
* Apply suggestions from code review
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Add possibility to global disable repo units.
* Add Default Repo Unit app.ini setting.
* Hide units
* Hide disabled repo units
* Minor fixes
* Indicate disabled units in team settings.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
* Refactor
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Add push-create to SSH serv
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Cannot push for another user unless admin
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Get owner in case admin pushes for another user
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Set new repo ID in result
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Update to service and use new org perms
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Move pushCreateRepo to services
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Fix import order
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Changes for @guillep2k
* Check owner (not user) in SSH
* Add basic tests for created repos (private, not empty)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
* Default NO_REPLY_ADDRESS to DOMAIN
The default NO_REPLY_ADDRESS was previously noreply.example.org
This PR changes this to default to the default DOMAIN for gitea.
* Change default to noreply.%(DOMAIN)s
* Change default to "noreply" + Domain
* Support custom sanitization policy
Allowing the gitea administrator to configure sanitization policy allows
them to couple external renders and custom templates to support more
markup. In particular, the `pandoc` renderer allows generating KaTeX
annotations, wrapping them in `<span>` elements with class `math` and
either `inline` or `display` (depending on whether or not inline or
block mode was requested).
This iteration gives the administrator whitelisting powers; carefully
crafted regexes will thus let through only the desired attributes
necessary to support their custom markup.
Resolves: #9054
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Document new sanitization configuration
- Adds basic documentation to app.ini.sample,
- Adds an example to the Configuration Cheat Sheet, and
- Adds extended information to External Renderers section.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Drop extraneous length check in newMarkupSanitizer(...)
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* Fix plural ELEMENT and ALLOW_ATTR in docs
These were left over from their initial names. Make them singular to
conform with the current expectations.
Signed-off-by: Alexander Scheel <alexander.m.scheel@gmail.com>
* add [ui] Reactions
* move contend check from form to go functions
* use else if
* check if reaction is allowed only on react
(so previous custom reaction can be still removed)
* use $.AllowedReactions in templates
* use ctx.Flash.Error
* use it there too
* add redirection
* back to server error
because a wrong reaction is a template issue ...
* add emoji list link
* add docs entry
* small wording nit
suggestions from @jolheiser - thx
* same reactions as github
* fix PR reactions
* handle error so template JS could check
* Add Integrations Test
* add REACTIONS setting to cheat-sheet doc page
* Add USE_SERVICE_WORKER setting
This will be very useful setting for anyone doing frontend work.
Fixes: https://github.com/go-gitea/gitea/issues/9044
* prevent potential syntax error on old browsers
* Graceful Shutdown for windows and others
Restructures modules/graceful, adding shutdown for windows, removing and
replacing the old minwinsvc code.
Creates a new waitGroup - terminate which allows for goroutines to
finish up after the shutdown of the servers.
Shutdown and terminate hooks are added for goroutines.
* Remove unused functions - these can be added in a different PR
* Add startup timeout functionality
* Document STARTUP_TIMEOUT
* Add retry for migration http/https requests
* give the more suitable name for retry configuraion items
* fix docs and lint
* Only use retryDownloader when setting > 1
* Add support for AUTO_WATCH_ON_CHANGES and AUTO_WATCH_ON_CLONE
* Update models/repo_watch.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Round up changes suggested by lafriks
* Added changes suggested from automated tests
* Updated deleteUser to take RepoWatchModeDont into account, corrected inverted DefaultWatchOnClone and DefaultWatchOnChanges behaviour, updated and added tests.
* Reinsert import "github.com/Unknwon/com" on http.go
* Add migration for new column `watch`.`mode`
* Remove serv code
* Remove WATCH_ON_CLONE; use hooks, add integrations
* Renamed watch_test.go to repo_watch_test.go
* Correct fmt
* Add missing EOL
* Correct name of test function
* Reword cheat and ini descriptions
* Add update to migration to ensure column value
* Clarify comment
Co-Authored-By: zeripath <art27@cantab.net>
* Simplify if condition
* in progress changes for #7405, added ability to add cross-repo dependencies
* removed unused repolink var
* fixed query that was breaking ci tests; fixed check in issue dependency add so that the id of the issue and dependency is checked rather than the indexes
* reverted removal of string in local files becasue these are done via crowdin, not updated manually
* removed 'Select("issue.*")' from getBlockedByDependencies and getBlockingDependencies based on comments in PR review
* changed getBlockedByDependencies and getBlockingDependencies to use a more xorm-like query, also updated the sidebar as a result
* simplified the getBlockingDependencies and getBlockedByDependencies methods; changed the sidebar to show the dependencies in a different format where you can see the name of the repository
* made some changes to the issue view in the dependencies (issue name on top, repo full name on separate line). Change view of issue in the dependency search results (also showing the full repo name on separate line)
* replace call to FindUserAccessibleRepoIDs with SearchRepositoryByName. The former was hardcoded to use isPrivate = false on the repo search, but this code needed it to be true. The SearchRepositoryByName method is used more in the code including on the user's dashboard
* some more tweaks to the layout of the issues when showing dependencies and in the search box when you add new dependencies
* added Name to the RepositoryMeta struct
* updated swagger doc
* fixed total count for link header on SearchIssues
* fixed indentation
* fixed aligment of remove icon on dependencies in issue sidebar
* removed unnecessary nil check (unnecessary because issue.loadRepo is called prior to this block)
* reverting .css change, somehow missed or forgot that less is used
* updated less file and generated css; updated sidebar template with styles to line up delete and issue index
* added ordering to the blocked by/depends on queries
* fixed sorting in issue dependency search and the depends on/blocks views to show issues from the current repo first, then by created date descending; added a "all cross repository dependencies" setting to allow this feature to be turned off, if turned off, the issue dependency search will work the way it did before (restricted to the current repository)
* re-applied my swagger changes after merge
* fixed split string condition in issue search
* changed ALLOW_CROSS_REPOSITORY_DEPENDENCIES description to sound more global than just the issue dependency search; returning 400 in the cross repo issue search api method if not enabled; fixed bug where the issue count did not respect the state parameter
* when adding a dependency to an issue, added a check to make sure the issue and dependency are in the same repo if cross repo dependencies is not enabled
* updated sortIssuesSession call in PullRequests, another commit moved this method from pull.go to pull_list.go so I had to re-apply my change here
* fixed incorrect setting of user id parameter in search repos call
* static url
* add cors support for static resources
* [assets] work on the migration to configurable url for assets
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [misc] fix whitespace
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] fix the loading of the manifest.json
It is generated dynamically, and as such can not be served by the cdn.
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Revert "add cors support for static resources"
This reverts commit 42f964fd18
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] add the STATIC_URL_PREFIX option
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [docs] reverse-proxy: nginx: add two setups for STATIC_URL_PREFIX
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* [assets] migrate the url of a new asset to the static url prefix
REF: f2a3abc683
Signed-off-by: Jakob Ackermann <das7pad@outlook.com>
* Expose db.SetMaxOpenConns and allow other dbs to set their connection params
* Add note about port exhaustion
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
This PR fixes #7598 by providing a configurable way of signing commits across the Gitea instance. Per repository configurability and import/generation of trusted secure keys is not provided by this PR - from a security PoV that's probably impossible to do properly. Similarly web-signing, that is asking the user to sign something, is not implemented - this could be done at a later stage however.
## Features
- [x] If commit.gpgsign is set in .gitconfig sign commits and files created through repofiles. (merges should already have been signed.)
- [x] Verify commits signed with the default gpg as valid
- [x] Signer, Committer and Author can all be different
- [x] Allow signer to be arbitrarily different - We still require the key to have an activated email on Gitea. A more complete implementation would be to use a keyserver and mark external-or-unactivated with an "unknown" trust level icon.
- [x] Add a signing-key.gpg endpoint to get the default gpg pub key if available
- Rather than add a fake web-flow user I've added this as an endpoint on /api/v1/signing-key.gpg
- [x] Try to match the default key with a user on gitea - this is done at verification time
- [x] Make things configurable?
- app.ini configuration done
- [x] when checking commits are signed need to check if they're actually verifiable too
- [x] Add documentation
I have decided that adjusting the docker to create a default gpg key is not the correct thing to do and therefore have not implemented this.
* Prevent deadlock in indexer initialisation during graceful restart
* Move from gracehttp to our own service to add graceful ssh
* Add timeout for start of indexers and make hammer time configurable
* Fix issue with re-initialization in indexer during tests
* move the code to detect use of closed to graceful
* Handle logs gracefully - add a pid suffix just before restart
* Move to using a cond and a holder for indexers
* use time.Since
* Add some comments and attribution
* update modules.txt
* Use zero to disable timeout
* Move RestartProcess to its own file
* Add cleanup routine
* Update app.ini.sample
Give further information on hyperlink rendering in Markdown
* Update app.ini.sample
Follow feedback from @guillep2k for CUSTOM_URL in markdown to indicate http and https are always rendered as links.
* Update custom/conf/app.ini.sample
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
* Update custom/conf/app.ini.sample
Co-Authored-By: Antoine GIRARD <sapk@users.noreply.github.com>
Add password complexity checks. The default settings require a lowercase, uppercase, number and a special character within passwords.
Co-Authored-By: T-M-A <maxim.tkachenko@gmail.com>
Co-Authored-By: Lanre Adelowo <adelowomailbox@gmail.com>
Co-Authored-By: guillep2k <18600385+guillep2k@users.noreply.github.com>
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Restrict repository indexing by file extension
* Use REPO_EXTENSIONS_LIST_INCLUDE instead of REPO_EXTENSIONS_LIST_EXCLUDE and have a more flexible extension pattern
* Corrected to pass lint gosimple
* Add wildcard support to REPO_INDEXER_EXTENSIONS
* This reverts commit 72a650c8e4.
* Add wildcard support to REPO_INDEXER_EXTENSIONS (no make vendor)
* Simplify isIndexable() for better clarity
* Add gobwas/glob to vendors
* manually set appengine new release
* Implement better REPO_INDEXER_INCLUDE and REPO_INDEXER_EXCLUDE
* Add unit and integration tests
* Update app.ini.sample and reword config-cheat-sheet
* Add doc page and correct app.ini.sample
* Some polish on the doc
* Simplify code as suggested by @lafriks
* Add Backend Logic for Toggling Email Notification
This commit adds the backend logic for
allowing users to enable or disable email
notifications. The implementation ensures
that only issue notification emails get disabled
and important emails are still sent regardless
of the setting.
The UI to toggle this setting has not yet been
implemented.
* Add UI and complete user email notification enable
This commit completes the functionality to allow
users to disable their own email notifications.
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Third Option for Only Email on Mention
Signed-off-by: Gary Kim <gary@garykim.dev>
* Readd NOT NULL to new preference string
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add Tests and Rewrite Comment
Signed-off-by: Gary Kim <gary@garykim.dev>
* Allow admin to set default email frequency
Signed-off-by: Gary Kim <gary@garykim.dev>
* Add new config option to docs
Signed-off-by: Gary Kim <gary@garykim.dev>
* Fix a few mistakes
Signed-off-by: Gary Kim <gary@garykim.dev>
* Only update required columns
Signed-off-by: Gary Kim <gary@garykim.dev>
* Simplify an error check
Signed-off-by: Gary Kim <gary@garykim.dev>
* Make email_notification_preference column in DB be VARCHAR(20)
Signed-off-by: Gary Kim <gary@garykim.dev>
* Handle errors
Signed-off-by: Gary Kim <gary@garykim.dev>
* Update models/migrations/v93.go
Co-Authored-By: Lauris BH <lauris@nix.lv>
* Add description in repository search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Refactor SearchRepositoryByName with a general function SearchRepository
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Allow to specify if description shall be included in API repo search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add new app.ini setting for whether to search within repo description.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Search keyword in description (if setting enabled) on:
- Explore page
- Organization profile page
- User profile page
- Admin repo page
Do not search keyword in description on:
- Any non-keyword search (not relevant)
- Incremental search (uses API)
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Put parameters related to keyword directly after it
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test cases for including (and not including) repository description in search.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Rename test function from TestSearchRepositoryByName to TestSearchRepository.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Make setting SEARCH_REPO_DESCRIPTION default to true
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add support for DEFAULT_ORG_MEMBER_VISIBLE
* Correct formatting
* Improved description in cheat sheet.
* Add test for DefaultOrgMemberVisible
* Remove dead code
* display ui time with customize time location
* fix lint
* rename UILocation to DefaultUILocation
* move time related functions to modules/timeutil
* fix tests
* fix tests
* fix build
* fix swagger
* Only show repository avatar in list when one was selected
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds fallback configuration option for repository avatar
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Implements repository avatar fallback
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Adds admin task for deleting generated repository avatars
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Solve linting issues
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Save avatar before updating database
* Linting
* Update models/repo.go
Co-Authored-By: zeripath <art27@cantab.net>
* Repository avatars
- first variant of code from old work for gogs
- add migration 87
- add new option in app.ini
- add en-US locale string
- add new class in repository.less
* Add changed index.css, remove unused template name
* Update en-us doc about configuration options
* Add comments to new functions, add new option to docker app.ini
* Add comment for lint
* Remove variable, not needed
* Fix formatting
* Update swagger api template
* Check if avatar exists
* Fix avatar link/path checks
* Typo
* TEXT column can't have a default value
* Fixes:
- remove old avatar file on upload
- use ID in name of avatar file - users may upload same files
- add simple tests
* Fix fmt check
* Generate PNG instead of "static" GIF
* More informative comment
* Fix error message
* Update avatar upload checks:
- add file size check
- add new option
- update config docs
- add new string to en-us locale
* Fixes:
- use FileHEader field for check file size
- add new test - upload big image
* Fix formatting
* Update comments
* Update log message
* Removed wrong style - not needed
* Use Sync2 to migrate
* Update repos list view
- bigger avatar
- fix html blocks alignment
* A little adjust avatar size
* Use small icons for explore/repo list
* Use new cool avatar preparation func by @lafriks
* Missing changes for new function
* Remove unused import, move imports
* Missed new option definition in app.ini
Add file size check in user/profile avatar upload
* Use smaller field length for Avatar
* Use session to update repo DB data, update DeleteAvatar - use session too
* Fix err variable definition
* As suggested @lafriks - return as soon as possible, code readability
* Fix documentation on Oauth2.Enable flag
The docs list this as ENABLED, but in the source code it's
ENABLE, meaning following the docs leads to confusion.
* Update sample config for oauth2.ENABLE
Adds a new key DEFAULT_SHOW_FULL_NAME (default false) to the [ui] section.
If enabled the full name will be shown (unless it's empty, then
the default username will be used)
* Add SUBJECT_PREFIX mailer config option
* Add space between subject prefix and subject (Change from Gogs)
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add option to disable refresh token invalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add integration tests and remove wrong todos
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix typo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix tests and add documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Panic don't fatal on create new logger
Fixes #5854
Signed-off-by: Andrew Thornton <art27@cantab.net>
* partial broken
* Update the logging infrastrcture
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Reset the skip levels for Fatal and Error
Signed-off-by: Andrew Thornton <art27@cantab.net>
* broken ncsa
* More log.Error fixes
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Remove nal
* set log-levels to lowercase
* Make console_test test all levels
* switch to lowercased levels
* OK now working
* Fix vetting issues
* Fix lint
* Fix tests
* change default logging to match current gitea
* Improve log testing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* reset error skip levels to 0
* Update documentation and access logger configuration
* Redirect the router log back to gitea if redirect macaron log but also allow setting the log level - i.e. TRACE
* Fix broken level caching
* Refactor the router log
* Add Router logger
* Add colorizing options
* Adjust router colors
* Only create logger if they will be used
* update app.ini.sample
* rename Attribute ColorAttribute
* Change from white to green for function
* Set fatal/error levels
* Restore initial trace logger
* Fix Trace arguments in modules/auth/auth.go
* Properly handle XORMLogger
* Improve admin/config page
* fix fmt
* Add auto-compression of old logs
* Update error log levels
* Remove the unnecessary skip argument from Error, Fatal and Critical
* Add stacktrace support
* Fix tests
* Remove x/sync from vendors?
* Add stderr option to console logger
* Use filepath.ToSlash to protect against Windows in tests
* Remove prefixed underscores from names in colors.go
* Remove not implemented database logger
This was removed from Gogs on 4 Mar 2016 but left in the configuration
since then.
* Ensure that log paths are relative to ROOT_PATH
* use path.Join
* rename jsonConfig to logConfig
* Rename "config" to "jsonConfig" to make it clearer
* Requested changes
* Requested changes: XormLogger
* Try to color the windows terminal
If successful default to colorizing the console logs
* fixup
* Colorize initially too
* update vendor
* Colorize logs on default and remove if this is not a colorizing logger
* Fix documentation
* fix test
* Use go-isatty to detect if on windows we are on msys or cygwin
* Fix spelling mistake
* Add missing vendors
* More changes
* Rationalise the ANSI writer protection
* Adjust colors on advice from @0x5c
* Make Flags a comma separated list
* Move to use the windows constant for ENABLE_VIRTUAL_TERMINAL_PROCESSING
* Ensure matching is done on the non-colored message - to simpify EXPRESSION
* fixes #5957
* add tests to make sure config option is respected
* use already defined struct
* - use migration to make the flag repo wide not for the entire gitea instance
Also note that the config value can still be set so as to be able to control the value for new repositories that are to be created
- fix copy/paste error in copyright header year and rearrange import
- use repo config instead of server config value to determine if a commit should close an issue
- update testsuite
* use global config only when creating a new repository
* allow repo admin toggle feature via UI
* fix typo and improve testcase
* fix fixtures
* add DEFAULT prefix to config value
* fix test
* Feature - Pagination for git tree API
* Handles case when page is negative
* Does a for loop over the start and end rather than all entries
* Removed redundent logic
* Adds per_page as a query parameter
* Adds DEFAULT_GIT_TREES_PER_PAGE for settings, ran make fmt
* Fix typo in cheat-sheet en
* Makes page start at 1, generated swagger
* Use updates to SDK
* Updates to use latest sdk
* Updates swagger for tree api
* Adds test for GetTreeBySHA
* Updates per PR reviews
* Updates per PR reviews
* Remove file
* Formatting
* Fix to swagger file
* Fix to swagger
* Update v1_json.tmpl
* Fix to swagger file
* Create log mailer for testing email settings
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Switch on the log mailer for the integration tests
This ensures that the sending mail process works
Signed-off-by: Andrew Thornton <art27@cantab.net>
* rename the from user for mysql/mssql
* rename log sender to dummy sender
* update the integration tests
Add a new config option to enable / disable the automatic watching of
repos for new repositories and if a user is added to a team.
Fixes #653
Signed-off-by: Sebastian Sauer <sauer.sebastian@gmail.com>
* add migration and basic UI for changing a user's theme
* update user themem
* use right text on button
* load theme based on users' selection
* load theme based on users' selection in pwa too
* update sample config
* delete older theme loading
* implement AfterLoad to set users' theme properly
* set up default theme when creating a user. This uses the installation wide theme
* use flash messages for error
* set default theme when creating a user from the cli
* fix @lunny review
* remove old git-version from git-scm url in app.ini
The url includes the version of git, which is not required to view the
page. If you open the page without the version you get the current
version and it's possible to switch the used version.
Signed-off-by: Roman <romaaan.git@gmail.com>
* docs: mention the git-scm url for git configs
Signed-off-by: Roman <romaaan.git@gmail.com>
* prevent pull request to be merged when PR is a WIP
* add tests
* add helper to prepend WIP: in PR title
* move default wip prefixes into settings
* use configurable WIP prefixes in javascript and default to first one in templates
* add documentation
* add unit test on pull model
Signed-off-by: Julien Tant <julien@craftyx.fr>
* Initial ui components for pull request review
* Add Review
Add IssueComment types
Signed-off-by: Jonas Franz <info@jonasfranz.software>
(cherry picked from commit 2b4daab)
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Replace ReviewComment with Content
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add load functions
Add ReviewID to findComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add create review comment implementation
Add migration for review
Other small changes
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Simplified create and find functions for review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved "Pending" to first position
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add GetCurrentReview to simplify fetching current review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Preview for listing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move new comment form to its own file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Implement Review form
Show Review comments on comment stream
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for single comments
Showing buttons in context
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add pending tag to pending review comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for Review
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fetch all review ids at once
Add unit tests
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improved comment rendering in "Files" view by adding Comments to DiffLine
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for invalidating comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Switched back to code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Moved review migration from v64 to v65
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Rebuild css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Improve translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix unit tests by updating fixtures and updating outdated test
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Comments will be shown at the right place now
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for deleting CodeComments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by files in subdirectories
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for showing code comments of reviews in conversation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for "Show/Hide outdated"
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update code.gitea.io/git
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add support for new webhooks
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Resolve conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor UI improvements
* update code.gitea.io/git
* Fix ui bug reported by @lunny causing wrong position of add button
Add functionality to "Cancel" button
Add scale effects to add button
Hide "Cancel" button for existing comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Prepare solving conflicts
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show add button only if no comments already exist for the line
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add missing vendor files
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Check if reviewer is nil
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Show forms only to users who are logged in
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Revert "Show forms only to users who are logged in"
This reverts commit c083682
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Save patch in comment
Render patch for code comments
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add link to comment in code
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add reply form to comment list
Show forms only to signed in users
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add 'Reply' as translatable
Add CODE_COMMENT_LINES setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* gofmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems introduced by checking for singed in user
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add v70
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update generated stylesheet
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix preview
Beginn with new review comment patch system
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add new algo to generate diff for line range
Remove old algo used for cutting big diffs (it was very buggy)
* Add documentation and example for CutDiffAroundLine
* Fix example of CutDiffAroundLine
* Fix some comment UI rendering bugs
* Add code comment edit mode
* Send notifications / actions to users until review gets published
Fix diff generation bug
Fix wrong hashtag
* Fix vet errors
* Send notifications also for single comments
* Fix some notification bugs, fix link
* Fix: add comment icon is only shown on code lines
* Add lint comment
* Add unit tests for git diff
* Add more error messages
* Regenerated css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* fmt
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Regenerated CSS with latest less version
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix test by updating comment type to new ID
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Introducing CodeComments as type for map[string]map[int64][]*Comment
Other minor code improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix data-tab issues
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove unnecessary change
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* refactored checkForInvalidation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Append comments instead of setting
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Use HeadRepo instead of BaseRepo
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update migration
Signed-off-by: Jonas Franz <info@jonasfranz.de>
* Regenerated CSS
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add copyright
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Update index.css
Signed-off-by: Jonas Franz <info@jonasfranz.software>
This makes it easier for user who want to theme but
don't have the ability to know how to customize templates
all that is required is a change in a config option
The reason why I chose the DEFAULT_THEME as variable,
as perhaps in the future we will allow users to chose their
theme whon logged in just like we do with languages
Update the sample configuration and config cheat sheet description for
the LOCAL_ROOT_URL configuration variable to mention the special case
required if PROTOCOL is set to 'unix'.
Fixes #3741.
Signed-off-by: Timothée Ravier <tim@siosm.fr>
* Add support for U2F
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add vendor library
Add missing translations
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Minor improvements
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F support for Firefox, Chrome (Android) by introducing a custom JS library
Add U2F error handling
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F login page to OAuth
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Move U2F user settings to a separate file
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add unit tests for u2f model
Renamed u2f table name
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix problems caused by refactoring
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add U2F documentation
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Remove not needed console.log-s
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Add default values to app.ini.sample
Add FIDO U2F to comparison
Signed-off-by: Jonas Franz <info@jonasfranz.software>
* Fix some comments in custom/conf/app.ini.sample
Some comments in app.ini.sample were very vague, didn't contain much information.
Some of them have been fixed, but mistakes that need to be fixed by an expert still remain, see #3928
Signed-off-by: Mikolaj Holysz <miki123211@gmail.com>
* Add an additional comment pointing to more documentation.
Add an additional comment to the top of the sample configuration file.
It contains a link pointing to gitea's docs and the configcheat sheet, which contains
some explanations about the parameters in the config.
Signed-off-by: Mikolaj Holysz <miki123211@gmail.com>
* Add an option to allow redirect of http port 80 to https.
This is an "opt in" option (default is to not redirect). It will only redirect
if protocol is https and the new REDIRECT_PORT_80 option is set to true.
The Port to redirect in previous commit was hardcoded to 80, now it can be
specified in the app.ini, defaulting to 80. The boolean option to turn
redirection on has been changed to REDIRECT_OTHER_PORT to be logically
consistent with the new port option.
Signed-off-by: Mike Fellows <mike.fellows@shaw.ca>
