During registration, one may be required to give their email address, to
be verified and activated later. However, if one makes a mistake, a
typo, they may end up with an account that cannot be activated due to
having a wrong email address.
They can still log in, but not change the email address, thus, no way to
activate it without help from an administrator.
To remedy this issue, lets allow changing the email address for logged
in, but not activated users.
This fixes gitea#17785.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit aaaece28e4)
(cherry picked from commit 639dafabec)
(cherry picked from commit d699c12ceb)
[GITEA] Allow changing the email address before activation (squash) cache is always active
This needs to be revisited because the MailResendLimit is not enforced
and turns out to not be tested.
See e7cb8da2a8 * Always enable caches (#28527)
(cherry picked from commit 43ded8ee30)
Rate limit pre-activation email change separately
Changing the email address before any email address is activated should
be subject to a different rate limit than the normal activation email
resending. If there's only one rate limit for both, then if a newly
signed up quickly discovers they gave a wrong email address, they'd have
to wait three minutes to change it.
With the two separate limits, they don't - but they'll have to wait
three minutes before they can change the email address again.
The downside of this setup is that a malicious actor can alternate
between resending and changing the email address (to something like
`user+$idx@domain`, delivered to the same inbox) to effectively halving
the rate limit. I do not think there's a better solution, and this feels
like such a small attack surface that I'd deem it acceptable.
The way the code works after this change is that `ActivatePost` will now
check the `MailChangeLimit_user` key rather than `MailResendLimit_user`,
and if we're within the limit, it will set `MailChangedJustNow_user`. The
`Activate` method - which sends the activation email, whether it is a
normal resend, or one following an email change - will check
`MailChangedJustNow_user`, and if it is set, it will check the rate
limit against `MailChangedLimit_user`, otherwise against
`MailResendLimit_user`, and then will delete the
`MailChangedJustNow_user` key from the cache.
Fixes #2040.
Signed-off-by: Gergely Nagy <forgejo@gergo.csillger.hu>
(cherry picked from commit e35d2af2e5)
(cherry picked from commit 03989418a7)
(cherry picked from commit f50e0dfe5e)
- Add a dropdown to the web interface for changing files to select which
Email should be used for the commit. It only shows (and verifies) that a
activated mail can be used, while this isn't necessary, it's better to
have this already in place.
- Added integration testing.
- Resolves https://codeberg.org/forgejo/forgejo/issues/281
(cherry picked from commit 564e701f40)
(cherry picked from commit de8f2e03cc)
(cherry picked from commit 0182cff12e)
(cherry picked from commit 9c74254d46)
(cherry picked from commit 2f0b68f821)
(cherry picked from commit 079b995d49)
(cherry picked from commit 6952ea6ee3)
Sends email with information on the new user (time of creation and time of last sign-in) and a link to manage the new user from the admin panel
closes: https://codeberg.org/forgejo/forgejo/issues/480
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1371
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit c721aa828b)
(cherry picked from commit 6487efcb9d)
Conflicts:
modules/notification/base/notifier.go
modules/notification/base/null.go
modules/notification/notification.go
https://codeberg.org/forgejo/forgejo/pulls/1422
(cherry picked from commit 7ea66ee1c5)
Conflicts:
services/notify/notifier.go
services/notify/notify.go
services/notify/null.go
https://codeberg.org/forgejo/forgejo/pulls/1469
(cherry picked from commit 7d2d997011)
(cherry picked from commit 435a54f140)
(cherry picked from commit 8ec7b3e448)
[GITEA] notifies admins on new user registration (squash) performance bottleneck
Refs: https://codeberg.org/forgejo/forgejo/issues/1479
(cherry picked from commit 97ac9147ff)
(cherry picked from commit 19f295c16b)
(cherry picked from commit 3367dcb2cf)
[GITEA] notifies admins on new user registration (squash) cosmetic changes
Co-authored-by: delvh <dev.lh@web.de>
(cherry picked from commit 9f1670e040)
(cherry picked from commit de5bb2a224)
(cherry picked from commit 8f8e52f31a)
(cherry picked from commit e0d5130312)
(cherry picked from commit f1288d6d9b)
(cherry picked from commit 1db4736fd7)
(cherry picked from commit e8dcbb6cd6)
(cherry picked from commit 09625d6476)
[GITEA] notifies admins on new user registration (squash) ctx.Locale
(cherry picked from commit dab7212fad)
(cherry picked from commit 9b7bbae8c4)
(cherry picked from commit f750b71d3d)
(cherry picked from commit f79af36679)
(cherry picked from commit e76eee334e)
[GITEA] notifies admins on new user registration (squash) fix locale
(cherry picked from commit 54cd100d8d)
(cherry picked from commit 053dbd3d50)
[GITEA] notifies admins on new user registration (squash) fix URL
1. Use absolute URL in the admin panel link sent on new registrations
2. Include absolute URL of the newly signed-up user's profile.
New email looks like this:
<details><summary>Please click to expand</summary>
```
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset=UTF-8
User Information: @realaravinth ( http://localhost:3000/realaravinth )
----------------------------------------------------------------------
* Created: 2023-12-13 19:36:50 +05:30
Please click here ( http://localhost:3000/admin/users/9 ) to manage the use=
r from the admin panel.
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770
Content-Transfer-Encoding: quoted-printable
Content-Type: text/html; charset=UTF-8
<!DOCTYPE html>
<html>
<head>
<meta http-equiv=3D"Content-Type" content=3D"text/html; charset=3Dutf-8">
<title>New user realaravinth just signed up</title>
<style>
blockquote { padding-left: 1em; margin: 1em 0; border-left: 1px solid gre=
y; color: #777}
.footer { font-size:small; color:#666;}
</style>
</head>
<body>
<ul>
<h3>User Information: <a href=3D"http://localhost:3000/realaravinth">@rea=
laravinth</a></h3>
<li>Created: <relative-time format=3D"datetime" weekday=3D"" year=3D"nume=
ric" month=3D"short" day=3D"numeric" hour=3D"numeric" minute=3D"numeric" se=
cond=3D"numeric" datetime=3D"2023-12-13T19:36:50+05:30">2023-12-13 19:36:50=
+05:30</relative-time></li>
</ul>
<p> Please <a href=3D"http://localhost:3000/admin/users/9" rel=3D"nofollow=
">click here</a> to manage the user from the admin panel. </p>
</body>
</html>
--153937b1864f158f4fd145c4b5d4a513568681dd489021dd466a8ad7b770--
```
</details>
fixes: https://codeberg.org/forgejo/forgejo/issues/1927
Reviewed-on: https://codeberg.org/forgejo/forgejo/pulls/1940
Reviewed-by: Earl Warren <earl-warren@noreply.codeberg.org>
Reviewed-by: Gusted <gusted@noreply.codeberg.org>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
Co-committed-by: Aravinth Manivannan <realaravinth@batsense.net>
(cherry picked from commit b8d764e36a)
(cherry picked from commit d48b84f623)
Conflicts:
routers/web/auth/auth.go
https://codeberg.org/forgejo/forgejo/pulls/2034
(cherry picked from commit 02d3c125cc)
(cherry picked from commit 367374ecc3)
Conflicts:
models/user/user_test.go
https://codeberg.org/forgejo/forgejo/pulls/2119
(cherry picked from commit 4124fa5aa4)
Fixes #27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix #28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Resolves https://github.com/go-gitea/gitea/issues/28451.
This change follows the recommendation by wxiaoguang to remove the
"Disable Minimum Key Size Check" from the "Service Configuration"
section of the UI, because this option belongs to the "SSH
Configuration" section of the administration menu and already has a
functioning indicator in that section of the UI.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Some translations are duplicated for the same package fields; it should
be possible to use the same approach. Checked packages to use the same
forms in templates.
1. Removed repeated translations for the same fields
2. Linked template files to the same translation fields
3. Added repository site link for nuget packages
* Show checkout instructions also when there is no permission to push,
for anyone who wants to locally test the changes.
* First checkout the branch exactly as is, without immediately having to
solve merge conflicts. Leave this to the merge step, since it's often
convenient to test a change without worrying about this.
* Use `git fetch -u`, so an existing local branch is updated when
re-testing the same pull request. But not the more risky `git fetch -f`
in to handle force pushes, as we don't want to accidentally overwrite
important local changes.
* Show different merge command depending on the chosen merge style,
interactively updated.
This PR will show the _noreply_ address in the privacy popup
_keep_email_private_popup_.
I had to look into the source code to figure out which E-Mail Adress I
had to use on gitea.com to hide it from public access.
According to the contribution guidelines I only updated the en-US
translation file.
Co-authored-by: Hakito <hakito@git.example.com>
Per the discussion on #22054, the flow for adding a new team member to
an org is not intuitive for new Gitea users.
The ideal solution would be to add a new button on the Org > Members
index view (see the screenshot mockup in the issue description).
However, this would require a refactor of the UX for the flow. The
current flow has an implicit context of which team within the org the
new member is being added to ('Owners' by default). From the Members
index, there is no implicit context; the flow would have to add a picker
for which team the new member should be added to.
So, as a stopgap, this change simply adds a button to the Teams index
page that performs the same action as clicking on the title of the team
(a behavior that is currently too obscure as indicated in the comments
on the issue). This should reduce support burden and serve as a decent
temporary measure until the Add Member flow is refactored.
---------
Co-authored-by: tomholford <tomholford@users.noreply.github.com>
Closes #27455
> The mechanism responsible for long-term authentication (the 'remember
me' cookie) uses a weak construction technique. It will hash the user's
hashed password and the rands value; it will then call the secure cookie
code, which will encrypt the user's name with the computed hash. If one
were able to dump the database, they could extract those two values to
rebuild that cookie and impersonate a user. That vulnerability exists
from the date the dump was obtained until a user changed their password.
>
> To fix this security issue, the cookie could be created and verified
using a different technique such as the one explained at
https://paragonie.com/blog/2015/04/secure-authentication-php-with-long-term-persistence#secure-remember-me-cookies.
The PR removes the now obsolete setting `COOKIE_USERNAME`.
This PR reduces the complexity of the system setting system.
It only needs one line to introduce a new option, and the option can be
used anywhere out-of-box.
It is still high-performant (and more performant) because the config
values are cached in the config system.
- switch from some weird status badge to label
- translate untranslated `Reset registration token` string
- change documentation link from act_runner README to Gitea Docs site
- fix "No runners available" message width
- use `ctx.Locale.Tr` where possible
Closes #26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Currently, Artifact does not have an expiration and automatic cleanup
mechanism, and this feature needs to be added. It contains the following
key points:
- [x] add global artifact retention days option in config file. Default
value is 90 days.
- [x] add cron task to clean up expired artifacts. It should run once a
day.
- [x] support custom retention period from `retention-days: 5` in
`upload-artifact@v3`.
- [x] artifacts link in actions view should be non-clickable text when
expired.
## Changes
- Forces flashed error to render immediately when forgot password code
is incorrect or has expired.
- Adds a link back to the `forgot_password` page so that the user can
restart the process (in the event that their link has expired)
This PR implements a proposal to clean up the admin users table by
moving some information out to a separate user details page (which also
displays some additional information).
Other changes:
- move edit user page from `/admin/users/{id}` to
`/admin/users/{id}/edit` -> `/admin/users/{id}` now shows the user
details page
- show if user is instance administrator as a label instead of a
separate column
- separate explore users template into a page- and a shared one, to make
it possible to use it on the user details page
- fix issue where there was no margin between alert message and
following content on admin pages
<details>
<summary>Screenshots</summary>
</details>
Partially resolves #25939
---------
Co-authored-by: Giteabot <teabot@gitea.io>
