- There were two issues with the profile card since the introduction of
HTMX in 3e8414179c. If an HTMX request
resulted in a flash message, it wasn't being shown and HTMX was
replacing all the HTML content instead of morphing it into the existing
DOM which caused event listeners to be lost for buttons.
- Flash messages are now properly being shown by using `hx-swap-oob`
and sending the alerts on a HTMX request, this does mean it requires
server-side changes in order to support HTMX requests like this, but
it's luckily not a big change either.
- Morphing is now enabled for the profile card by setting
`hx-swap="morph"`, and weirdly, the morphing library was already
installed and included as a dependency. This solves the issue of buttons
losing their event listeners.
- This patch also adds HTMX support to the modals feature, which means
that the blocking feature on the profile card now takes advantage of
HTMX.
- Added a E2E test.
Another pure CSS module. Some styling is part of the `form` module which
will likely follow next.
(cherry picked from commit ff334749f58c71980ec19143bc21c0a799074b30)
Conflicts:
- web_src/js/components/DashboardRepoList.vue
Resolved the conflict by manually applying the Gitea change.
Get rid of one more jQuery dependant and have a nicer color picker as
well.
Now there is only a single global color picker init because that is all
that's necessary because the elements are present on the page when the
init code runs. The init is slightly weird because the module only takes
a selector instead of DOM elements directly.
The label modals now also perform form validation because previously it
was possible to trigger a 500 error `Color cannot be empty.` by clearing
out the color value on labels.
<img width="867" alt="Screenshot 2024-03-25 at 00 21 05"
src="https://github.com/go-gitea/gitea/assets/115237/71215c39-abb1-4881-b5c1-9954b4a89adb">
<img width="860" alt="Screenshot 2024-03-25 at 00 20 48"
src="https://github.com/go-gitea/gitea/assets/115237/a12cb68f-c38b-4433-ba05-53bbb4b1023e">
(cherry picked from commit dd8dde2be89921b2b1497c6cc5eafdde213429cb)
This pattern comes of often during review, so let's fix it once and for
all. Did not test, but changes are trivial enough imho.
(cherry picked from commit 8fe26fb314f1710139728d9118b455fc6a16cce2)
- Switched from jQuery `.attr` to plain javascript `getAttribute`
- Tested the show/hide modal buttons, they work as before
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 900dd79d8adaf2569df0f1346b6e6e91ed4b5ad3)
To keep blame info accurate and to avoid [changes like
this](https://github.com/go-gitea/gitea/pull/29977/files#diff-c3422631a14edbe1e508c4b22f0c718db318be08a6e889427802f9b6165d88d6R359),
it's good to always have a trailing comma, so let's enforce it in JS.
This rule is completely automatically fixable with `make lint-js-fix`
and that's what I did here.
(cherry picked from commit 3d751b6ec18e57698ce86b79866031d2c80c2071)
Conflicts:
web_src/js/components/DashboardRepoList.vue
trivial context conflict because of '3b7b899afa fix commit_status'
When logging out of Gitea, a error toast can be seen for a split second.
I don't know why or how it happens but I found it it's an `AbortError`
(related to
[AbortController#abort](https://developer.mozilla.org/en-US/docs/Web/API/AbortController/abort)),
so let's hide it.
(cherry picked from commit 886e90aa82521d2c2ae17d3e177c056ae32e4aa6)
Replace 18 `gt-` prefixes with `tw-` with perl replacement. I manually
checked them all with `rg` afterwards.
(cherry picked from commit a2e90014ec20a1085449a66061389cfe0d12260f)
Conflicts:
templates/repo/header.tmpl
because some of the header moved to header_fork.tmpl
- Removed all jQuery AJAX calls and replaced with our fetch wrapper
- Tested the locale change functionality and it works as before
- Tested the delete button functionality and it works as before
# Demo using `fetch` instead of jQuery AJAX
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
(cherry picked from commit 8a0a83a1b53f55bcc710c3b229cba1c1bcf471c6)
- Closes https://github.com/go-gitea/gitea/issues/28880
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
- Add `htmx.js` that imports `htmx.org` and initializes error toasts
- Place `hx-headers='{"x-csrf-token": "{{.CsrfToken}}"}'` on the
`<body>` tag so every request that htmx sends is authenticated
- Place `hx-swap="outerHTML"` on the `<body>` tag so the response of
each htmx request replaces the tag it targets (as opposed to its inner
content)
- Place `hx-push-url="false"` on the `<body>` tag so no changes to the
URL happen in `<form>` tags
- Add the `is-loading` class during request
### Error toasts in action
## Don't do a full page load when clicking the subscribe button
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
### Before
### After
## Don't do a full page load when clicking the follow button
- Use htmx to perform the button request
- `hx-post="{{.ContextUser.HomeLink}}?action=follow"` to send a POST
request to follow the user
- `hx-target="#profile-avatar-card"` to target the card div for
replacement
- `hx-indicator="#profile-avatar-card"` to place the loading indicator
on the card
- Change the backend response to return a `<div>` tag (the card) instead
of a redirect to the user page
### Before
### After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
Co-authored-by: 6543 <m.huber@kithara.com>
Co-authored-by: Giteabot <teabot@gitea.io>
- Refactor the form around the subscribe button into its own template
- Use htmx to perform the form submission
- `hx-boost="true"` to prevent the default form submission behavior of a
full page load
- `hx-sync="this:replace"` to replace the current request (in case the
button is clicked again before the response is returned)
- `hx-target="this"` to replace the form tag with the new form tag
- `hx-push-url="false"` to disable a change to the URL
- `hx-swap="show:no-scroll"` to preserve the scroll position
- Change the backend response to return a `<form>` tag instead of a
redirect to the issue page
- Include `htmx.org` in javascript imports
This change introduces htmx with the hope we could use it to make Gitea
more reactive while keeping our "HTML rendered on the server" approach.
# Before
# After
---------
Signed-off-by: Yarden Shoham <git@yardenshoham.com>
1. Dropzone attachment removal, pretty simple replacement
2. Image diff: The previous code fetched every image twice, once via
`img[src]` and once via `$.ajax`. Now it's only fetched once and a
second time only when necessary. The image diff code was partially
rewritten.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
WIP because:
- [x] Some calls set a `content-type` but send no body, can likely
remove the header
- [x] Need to check whether `charset=utf-8` has any significance on the
webauthn calls, I assume not as it is the default for json content.
- [x] Maybe `no-restricted-globals` is better for eslint, but will
require a lot of duplication in the yaml or moving eslint config to a
`.js` extension.
- [x] Maybe export `request` as `fetch`, shadowing the global.
Before:
* The layout is quite complex
* The UI flickers when switch the stats (https://try.gitea.io/)
After:
* Simplify the code
* The UI doesn't flicker
In GitHub, we can not rerun jobs if the workflow is disabled.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix #25438
All non-"ok" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
A regression of #25210
The `e.target` is not "this", eg: `<button link-action><svg></button>`,
then `this` should be `button` but `e.target` is `svg`.
I will propose a clearer and complete solution for these "link-action"
"show-modal" elements after #24724
Co-authored-by: Giteabot <teabot@gitea.io>
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
According to my test, the UI (emoji) is fine in Safari
And actually the code is just dead code, because the "resize" event is
never fired on page loading. So for most cases users just view the pages
without this hacky patch, nobody ever complains.
Visually, nothing should have changed.
Changes include
- Convert most `<a [no href]>` to `<button>` when (re-)viewing files:
- `<a [no href]>` are, by HTML definition, not a link and hence cannot
be focused
- `<a class="ui button">` can now be clicked (again?) using
<kbd>Enter</kbd>
- Previously, the installed keypress handler on `.ui.button` elements
disabled it for links somehow
- The `(un)escape file`, the `expand section` and the `expand/collapse
file` buttons can now be focused (and subsequently clicked using only
the keyboard)
- You can now press <kbd>Space</kbd> on a focused `View file` checkbox
to mark the file as viewed.
- previously, this was impossible as this checkbox listened on the wrong
event listener
The `add code comment` button has been left inaccessible for now as it
requires quite a bit of extra logic so that it is unhidden when it is
focused (you can otherwise focus it without seeing it as you are not
hovering on the corresponding line).
---------
Co-authored-by: silverwind <me@silverwind.io>
Some of those are still Copy&Paste problems.
This PR:
* Only cleans the legacy incorrect code, doesn't change or improve the
"action" logic.
* Remove the redundant `$('.toggle.button').on('click')`, now
`$('.show-panel.button').on('click')` handles that kinds of buttons
Actually, there is only one correct "toggle button" in code, the one on
the webhook page.
No need to backport.
Although it seems that some different purposes are mixed in this PR,
however, they are all related, and can be tested together, so I put them
together to save everyone's time.
Diff: `+79 −84`, everything becomes much better.
### Improve the dropdown settings.
Move all fomantic-init related code into our `fomantic.js`
Fine-tune some dropdown global settings, see the comments.
Also help to fix the first problem in #23625 , cc: @yp05327
The "language" menu has been simplified, and it works with small-height
window better.
### Use SVG instead of `<i class="delete icon">`
It's also done by `$.fn.dropdown.settings.templates.label` , cc:
@silverwind
### Remove incorrect `tabable` CSS class
It doesn't have CSS styles, and it was only in Vue. So it's totally
unnecessary, remove it by the way.
### Improve the Repo Topic Edit form
* Simplify the code
* Add a "Cancel" button
* Align elements
Before:
<details>
</details>
After:
Resolves #22692
I don't think there's a need for this entire row to be clickable (and
even different links depending on which segment you click)
The links still point to the same spot, so no information is lost here.
---------
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
